Used Water Centrifugal for sale (8,474)

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, trailer coupling, From our immediately available new vehicle stock, we offer you: TLF 4000/TLF 5000 All-Wheel Drive on all-terrain MAN TGS 18.510 4x4 Chassis Introducing our MAN Mountain Lion! With 510 hp and the all-terrain, single-tired all-wheel chassis, it thrives in demanding environments. Perfect for steep gradients, adverse conditions, and off-road areas far from any road. Chassis: - MAN TGS 18.510 4x4 EURO 6 with 510 hp (375 kW) - Automatic transmission - Single-tire off-road specification for maximum off-road capability Cab: - Standard crew cab (1:5) in RAL 3000 (fire red) - Air conditioning and auxiliary heater - 4 standard SCBA holders in the crew compartment Superstructure: - High-quality modular construction in rust- and corrosion-resistant materials - 4 flexible and spacious equipment compartments per vehicle side - Swing panels for maximum storage capacity - Foldable steps for each lateral equipment compartment - Custom-made stainless steel equipment mountings according to your specifications Ndodpfxjxw Rdxo Aczjd - Walkable, non-slip vehicle roof Vehicle Pump/Extinguishing Agent Tank: - Maintenance-free combined normal/high-pressure pump FPN 3000-10 - PUMP&ROLL capable - Output of over 3,000 l/min at 10 bar and 400 l/min at 40 bar - Integrated, infinitely adjustable foam proportioning system - Water tank 5,000 l with integrated 500 l foam agent tank - Auxiliary heater in the pump compartment Firefighting Equipment: - High-pressure rapid attack with 50 m form-stable hose - Remote-controlled foam/water monitor on the vehicle roof - Remote-controlled front monitor - Self-protection system with 4 spray nozzles in front of the wheels Safety & Lighting: - LED light bar on the roof / 2 LED front flashers - Additional blue lights on the superstructure - Pneumatic Martin horn special signal system - 100 W PA system with announcement unit - Rear view camera - Comprehensive LED lighting in crew and all equipment compartments - Perimeter LED lighting on the body and auxiliary headlights - Pneumatic LED light mast with remote control - Hygiene board on request We would be happy to provide you with a detailed offer and present the vehicle to you in Berlin. All details provided to the best of our knowledge without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: reconditioned (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, fully serviced, inspected, and ready for operation after retrofit in 11/2025. Certificate: Maximator JET Availability: in 4 weeks Year of manufacture (cutting table): 2019 Operating hours (cutting table): 5,900 h • Effective cutting area: 2,000 mm (bridge) x 1,000 mm • Z-axis CNC clearance height: 200 mm with Quick UP Ndjdpfx Ajxw Nn Neczsd • Cutting head TAC12, A/B +/- 12° • Automatic height sensing and collision protection • CNC control unit: NUM • Rittal control cabinet on castors • Operator PC with LED monitor, splash-proof keyboard and mouse • Waterjet software: SmartCut powered by IGEMS, subscription • Handheld remote control • Laser positioning system • Cutting valve MJ 100 • Abrasive head: aJET 3D • CNC abrasive dosing unit with intermediate container • Abrasive storage tank: 1,200 kg with automatic pressure conveying system • High-pressure piping on the axes up to the cutting head • Safety system with light barriers • Water basin with heavy-duty slat supports • Adjustable stops on X and Y axes • Machine precision wedge shoes for levelling • Warranty: 1 year or 1,200 operating hours Price for cutting table with control system ex works, plus VAT: €97,000 • High-pressure pump HYTRON 40.30, 30 kW, year 2006, 28,852 h, retrofit 10/2025 with warranty, new pulse damper with TÜV certification Total price for cutting table with control system and pump ex works, plus VAT: €113,000 Option: • Automatic flushing and sedimentation system: €4,600 Modifications and errors in the technical data and prices excepted. Subject to prior sale.

Year of construction: 1999, condition: used, drum diameter 382 mm drum height 250 mm filling amount 40 kg wall thickness of drum 13 mm drum revolutions 2850 U/min Capacity 800 l/h voltage 400 V total power requirement 5,0 kW Ndedpjxwzc Sjfx Aczed weight of the machine ca. 500 kg dimensions of the machine ca. 1,90 x 0,70 x 1,65 m Centrifuge with water treatment - Factory No.: 22126799 - Machine ON: 5.144,65 h - Timer

Condition: excellent (used), functionality: fully functional, Electric water heater Nsdpfx Acevbfvhjzsdd Maximum power - 18kW

Year of construction: 1995, condition: excellent (used), 2 units centrifugal pumps Sulzer MB 80-230/3 Flow rate: 79-89 m³/h Ndsdod Sybuspfx Aczjd Head: 240-230 m Max. temperature: 130°C Seal: Mechanical seal with flush water connection Drive power: Siemens 90 kW Speed: 2980 rpm ! Price per unit !

Condition: excellent (used), functionality: fully functional, DAF water treatment plant Consists of:- Holding tanks Ndodpexwni Eefx Aczed Mixing tanks Nijhuis Saur Industries DAF KHD Humboldt centrifuge All associated pumps and dosing units. Ex Walkers crisps previously treating 71 cubic meters per hour

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x4, fuel: diesel, color: red, gearing type: automatic, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, differential lock, parking heater, trailer coupling, From our immediately available stock of new vehicles, we offer you: Ndedpfxjxw Rcne Aczed TLF 4000 All-Wheel Drive – 6,000 l water tank mounted on an off-road-capable MAN TGM 18.320 all-wheel-drive chassis with winch If you require more water, crew capacity, and equipment, our TLF 6000 is the right choice. The red giant also makes a great impression off-road. And if others reach their limits, the powerful front winch provides assistance. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) and automatic transmission • Off-road tyres, twin tyres on rear axle for high driving stability • 100 kN front winch Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 BA brackets in the crew compartment Body: • High-quality frame construction made from stainless and corrosion-free materials • Fold-out steps for each lateral equipment compartment • Individually customised equipment storage made from stainless steel • Walkable, non-slip vehicle roof Vehicle Pump / Extinguishing Agent Tank: • Maintenance-free combined normal/high-pressure pump FPN 4000-10 • Pump & Roll capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • 6,000 l water tank with integrated 600 l foam agent tank • Additional heater in the pump room Firefighting Equipment: • High-pressure rapid intervention line with 50 m rigid hose • Foam/water monitor 2,000 l/min on vehicle roof • Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting: • LED lightbar on vehicle roof / 2 LED front flashers • Pneumatic Martin-horn special signalling system • 100 W loudspeaker system with PA unit • Reversing camera • Comprehensive LED lighting in the crew and all equipment compartments • LED area lighting on the body and auxiliary spotlights • Pneumatic LED light mast with remote control • Hygiene board available on request We are happy to provide a detailed quotation and present the vehicle to you personally at our Berlin location. All information is given to the best of our knowledge; no guarantee of completeness or accuracy. This advert does not constitute a binding offer but serves for information purposes only. Subject to prior sale!

Condition: used, Water or liquid filling line for PET containers – capacity approx. 6000 bph (2.0 L) Currently, the machines are configured for 2.0 L PET bottle formats (other formats not included). It is possible to adjust to smaller or larger PET bottles by preparing the appropriate equipment. The line includes: - Nagema BF-60 filler with 12-head bottle capping unit - Plate conveyors for PET bottles Ndsdpfx Aewny Hgsczed - Nagema saturator, type KOMI 160 - Spomasz wrap-around paper labeller - Bottle packer with control cabinet for creating multipacks, e.g. 2x3 - Electric shrink oven + cooling fan for multipacks - Pallet wrapper The last photo shows the layout and dimensions of the machines. Technical condition: the machines were operational up to the end of production in 2018. Inspection and maintenance are recommended before resuming production. Optionally, a SIDEL SBO4 blower, which was last in operation on this line, can also be purchased.

Condition: used, Year of construction: 2001, functionality: fully functional, "Complete Glass Bottle Refilling Line. Comprehensive and fully equipped glass bottle refilling line, suitable for beverage and liquid production industries. The line includes depalletizing, washing, filling, capping, labeling, packing, palletizing, and wrapping equipment from renowned manufacturers, ensuring efficiency, reliability, and high-quality output. High-Capacity Production – Designed for mass production with automated operations. Durable Stainless Steel Construction. Fully Integrated System – Covers all aspects from washing to palletizing. Ndedewlg Swspfx Aczjd Reputable Brands – Manufactured by industry-leading companies. Well-Maintained – Regular maintenance, with some newer components."

Condition: good (used), APV Centrifugal Pump Type W 60/300 Manufacturer: APV, Horsens, Denmark Nsdpfx Acstk Hx Eozjdd Material: Acid-proof stainless steel (AISI 316L) Motor: 37 kW, 380 V, 2950 RPM Design: Sanitary high-speed centrifugal pump with open impeller Condition: Used, in good mechanical condition Estimated capacity: approx. 45 – 60 m³/h (depending on product and pressure head) Pressure head: up to approx. 70 – 90 m Application: Designed for high-pressure applications in the dairy, food, and beverage industries, such as CIP supply, pasteurizers, evaporators, and process lines. Location: Denmark Price: On request / EXW Denmark 2 identical units available.

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Ndsdpfsibwarex Aczsd Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with flushing water connection Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm ! Price per unit !

Year of construction: 2021, condition: new, ebmpapst EC-centrifugal module, backward-curved, single-intake, with support bracket Type: K3G250-PR04-H2 Ndjdpfji D Eiqjx Aczsd Motor: M3G084-DF Phase: 1~ Nominal voltage: 230 VAC Nominal voltage range: 200 .. 277 VAC Frequency: 50/60 Hz Method of obtaining data ml Speed: 3080 min-1 Power consumption: 500 W Current draw: 2.3 A Min. ambient temperature: -25°C Max. ambient temperature: 40°C The fans are new and in priginal packaging with 18 pieces per pallet of the production year 10/2021. There are several pallets available. Incl. packaging ex works 53567 Buchholz (Westerwald), Germany. We will gladly organise freight. Please enquire about freight costs, stating the destination.

Condition: new, functionality: fully functional, power: 183.87 kW (249.99 HP), fuel type: diesel, axle configuration: 4x2, gearing type: semi-automatic, emission class: euro6, Year of construction: 2025, Equipment: airbag, cable winch, differential lock, From our immediately available stock of new vehicles, we offer you: MLF/TLF 2500 crew version on MAN TGL 12.250 4x2 Our MLF on MAN TGL meets many requirements. In addition to a crew configuration and ample space for equipment, it also provides a substantial water supply. This enables immediate firefighting operations without delay. Chassis: • MAN TGL 12.250 4x2 EURO 6 with 250 HP (184 kW) • Automated gearbox • Differential lock • Twin tires on rear axle for high driving stability • Front winch available upon request Cab • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 BA (breathing apparatus) holders in the crew compartment Body • High-quality superstructure in frame construction, made from rust and corrosion-free materials • Folding steps for each side equipment compartment • Stainless steel equipment mounts individually adapted to your requirements • Walkable, anti-slip vehicle roof • Generous roof box Vehicle Pump/Extinguishing Agent Tank • Maintenance-free combined normal/high pressure pump FPN 2000-10 • PUMP&ROLL-capable • Output: 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • 2,500 l water tank with integrated 250 l foam agent tank • Additional heating in GR (pump compartment) Firefighting Equipment • High-pressure rapid intervention hose reel with 50 m form-stable hose • 2,000 l/min foam/water monitor on the vehicle roof • Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting • LED lightbar on vehicle roof/2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W loudspeaker system with announcement unit • Rear-view camera • Comprehensive LED lighting in the crew and all equipment compartments • LED perimeter lighting on body and additional spotlights • Pneumatic LED light mast with remote control • Rear warning system • Hygiene board available upon request Ndedpfx Ajxw Ratsczsd We would be happy to provide you with a detailed quotation and give you a comprehensive vehicle demonstration at our site in Berlin. All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement does not constitute an offer but serves as information only. Subject to prior sale!

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Ndjdpfxsxgq I Nj Aczed Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw

Condition: excellent (used), Year of construction: 2016, Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump, high-pressure centrifugal pump, vertical pump -Condition: unused -Manufacturer: E-Tech Franklin Electric, Vertical pump type EV15/05 FII040 T E1 IE3 -Motor: AEG 4.0 kW -Flow rate: 8 - 24 m³/h -Pumping height: 28.3 - 72.5 m -pmax: 25 bar/120°C -Pipe connection Ø 50 mm see photos -Dimensions: 300/250/H870 mm -Weight: 52.8 kg. Ndsdpsxt Epbsfx Aczjd

Condition: used, Item: D-3309-Grundfos pump Grundfos Centrifugal Pump – Type CP3-60 Used high-quality Grundfos centrifugal pump, made in Denmark. Compact, reliable unit suitable for industrial, food industry, and CIP applications. Technical details: Manufacturer: Grundfos (Denmark) Type: CP3-60 Model: B91-25756 Speed: 2900 rpm (50 Hz) Capacity: approx. 3 m³/h Head: approx. 52 m Power: approx. 1.2–1.4 kW Material: Stainless steel (depending on configuration) Condition: Used, in good working order Applications: Nsdext Itvjpfx Aczjdd Ideal for CIP return, clean water, cooling circuits, filtration systems, or other industrial processes that require stable pressure and moderate flow rates. Location: Denmark Price: On request

Year of construction: 1995, condition: excellent (used), 3 units centrifugal pumps Sulzer MB 40-160/5 Flow rate: 32 m³/h Head: 147 m Max. temperature: 130°C Seal: Mechanical seal with barrier water Drive power: Siemens 22 kW Speed: 2950 rpm Nodped Sybpefx Aczedd ! Price per unit !

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: TET802P3-20 - 2200356834, cooling capacity: 159 kW (216.18 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,192 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 27.1 m³/h, pump pressure: 3.13 bar, total width: 1,250 mm, total length: 3,535 mm, total height: 2,151 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-cooled chiller unit, Model: TAEevo Tech 802 P3-20 Manufacturer: MTA S.p.A. The TAEevo Tech 802 P3-20 is a compact, air-cooled water chiller designed for outdoor installation (operation range: -20°C to +46°C). Features include crankcase heater, phase monitoring, electronic expansion valves, 678-liter buffer tank, integrated P3 circulation pump on the suction side, and winter control (condenser pressure regulation down to -20°C). Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 159 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 27.1 Available pump pressure (bar): 3.13 Ndsdowltwgjpfx Aczjd Ambient temperature (°C): 32 Refrigerant: R 410A Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Maximum power input (kW): 79.48 Maximum current (A): 142.2 Starting current (A): 286.2 Protection class: IP54 Dimensions: Length (mm): 3535, Width (mm): 1250, Height (mm): 2151 Weight (kg): 2192 Connection: Rp 3" Serial No.: 2200356834 Year of manufacture: 2020 Condition: Visual: 2, Technically: OK (used) Price: On request in euro (plus VAT, ex works Nettetal) Used machines may show visual imperfections due to prior use. (Specifications subject to change and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available. Nedpfoxgr Hgjx Aczodd

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: TET251P5 - 2200384598, cooling capacity: 48.7 kW (66.21 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,034 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 8.26 m³/h, pump pressure: 4.93 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Chiller / Air-Cooled Water Chiller, Type: TAEevo Tech 251 P5 Manufacturer: MTA S.p.A. The TAEevo Tech 251P5 is a compact, air-cooled water chiller designed for outdoor installation (operating range: -5°C to +46°C). It comes equipped with crankcase heater, phase monitoring, 350 L buffer tank, and an integrated P5 high-pressure circulating pump. Chilled water outlet temperatures are adjustable from -10°C to +30°C. Cooling capacity: 48.7 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 8.26 Available pump pressure (bar): 4.93 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Maximum power consumption: 29 kW Maximum current: 50 A Starting current per circuit: 149 A Protection class: IP54 Dimensions: Length (mm): 2250 Width (mm): 866 Height (mm): 2054 Ndodpfx Aowlr Eioczed Weight (kg): 1034 Connection: Rp 2" Serial No.: 2200384598 Year of manufacture: 2022 Condition: Visual 2, Technically OK Used Price: on request in EUR (plus VAT, ex-works Nettetal) – 3 months warranty Used machines may have visual imperfections due to previous use. (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Ndedpfx Ajxgttzjczsd A total of four dryers of this model are available.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: TET161P3 - 2200401928, cooling capacity: 38.6 kW (52.48 HP), type of input current: three-phase, type of cooling: water, overall weight: 666 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 6.58 m³/h, pump pressure: 2.59 bar, total width: 760 mm, total length: 1,860 mm, total height: 1,440 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process Air Cooler / Chiller / Air-cooled Water Chiller Unit Type: TAEevo Tech 161 P3 MTA S.p.A. The TAEevo Tech 161 is a compact, air-cooled water chiller unit designed for outdoor installation. Features include crankcase heater, phase monitoring, 255 l buffer tank, and integrated P3 circulation pump. Adjustable chilled water outlet temperatures from -10°C to +30°C. Ndsdpjrx S Anofx Aczsd Cooling capacity: 38.6 kW Chilled water outlet/inlet temperature (°C): 7 / 12 Flow rate (m³/h): 6.58 Available pump pressure (bar): 2.59 Ambient temperature (°C): 32 Refrigerant: R410A Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. power consumption (kW): 21 Max. current (A): 36 Starting current circuit (A): 204 Protection class: IP54 Dimensions: Length (mm): 1862, Width (mm): 761, Height (mm): 1437 Weight (kg): 666 Connection: Rp 1 1/2" Serial No.: 2200401928 Year of manufacture: 2023 Condition: Visual grade 2, technically sound Used (Technical changes and prior sale reserved!) Used machinery may display visual defects due to operational usage. Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available. Ndsdpjxgtrwefx Aczsd

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NEG013HE - BAR102757, cooling capacity: 46.09 kW (62.66 HP), type of input current: three-phase, type of cooling: water, overall weight: 427 kg, input voltage: 400 V, pressure: 10 bar, temperature: 7 °C, volume flow: 7.92 m³/h, total width: 676 mm, total length: 1,555 mm, total height: 1,417 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Chiller / Refrigeration Unit – Water / Water-Cooled, Type: Neptune NEG 013HE (R454B) Manufacturer: MTA S.p.A. The Neptune NEG 013N is a water-cooled chiller for indoor installation, supplied without hydraulic circuit (pump, buffer tank), but includes crankcase heater and phase monitoring. An external dry cooler is not included in the offer. Features: - Flow switch on evaporator - Filter on evaporator (supplied loose) - Flow switch on condenser - Condensation control without valves (2-10V signal for external pump) - Filter on condenser (supplied loose) - Closed panel housing Cooling capacity: 46.09 kW Evaporator: Chilled water outlet/inlet temperature: 7 / 12°C Flow rate: 2.20 l/s (7.92 m³/h) Pressure drop: 15.3 kPa Condenser: Ndedpfsw Nq Euox Aczod Cooling water outlet/inlet temperature: 45 / 40°C Flow rate: 3.13 l/s (11.27 m³/h) Pressure drop: 34.5 kPa Refrigerant: R454B, GWP 467, A2L Refrigerant charge: 5.1 kg Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. Power Consumption: 18.5 kW Max. Current: 32.4 A Starting Current (circuit): 156.9 A Protection Class: IP22 Dimensions: Length: 1555 mm, Width: 676 mm, Height: 1417 mm Weight: 427 kg Chilled water connection: Victaulic 2" Cooling water connection: Victaulic 2" Serial No.: BAR102757 Year of manufacture: 2025 Condition: Excellent visually, technically sound In-stock unit, like new Price: On request in Euros (plus VAT, ex works Nettetal) – 12-month warranty (Technical modifications and interim sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: iASN075N - 2200xxxxxxx, cooling capacity: 164 kW (222.98 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,634 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 10 bar, temperature: 7 °C, volume flow: 28.9 m³/h, total width: 2,241 mm, total length: 3,541 mm, total height: 2,425 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller unit Type: iAries N iASN 075 HE Special – R290 Manufacturer: MTA S.p.A. The Aries N iASN 075 HE Special is a compact water chiller unit designed for outdoor installation. The unit is Eurovent certified. Features: - Refrigerant: R290 - HE (High Efficiency) version - INVERTER technology - Plate heat exchanger - EC brushless fans - Direct-on-line compressor start - Compressor suction/discharge valves - Microchannel condenser coils - Complete compressor enclosure - Smaller evaporator compared to the standard unit - Smaller Ziehl fans with 800 mm diameter Cooling capacity (kW): 164 Chilled water out/in temp. (°C): 7 / 12 Volume flow (m³/h): 28.9 Available pump head (bar): 0 Ambient temperature (°C): 35 Refrigeration circuit: Refrigerant: R290 Number of circuits: 2 Compressors (quantity): 1 + 1i Capacity control (%): stepless from 25 to 100 Electrical data: Voltage V: 400, Frequency Hz: 50, Phases: 3 Max. power consumption (kW): 67 Max. current (A): 117 Starting current per circuit (A): 315 Protection class: IP54 Dimensions: Length (mm): 3541, Width (mm): 2241, Height (mm): 2425 Weight (kg): 2634 Connection: Victaulic DN 80 Serial No.: 2200xxxxx Nsdpfxoxaz Iyo Aczodd Year of manufacture: 2024 Condition: Visual 1, technically OK Stock machine, new Price: on request in EUR (plus VAT, ex-works MTA Italy) – 12 months warranty (Technical changes and prior sale reserved!) Location: MTA, Tribano