Used Vertical Stacker for sale (9,246)

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. (preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional Laedpfjxp Rywex Ab Ujh shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: used, Year of construction: 1998, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 426 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm Lajdpfxoxp Ry De Ab Uoh max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T - ICS

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm Lodpfx Abjv Rrq Ds Usah z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: good (used), Year of construction: 1996, operating hours: 3,457 h, load capacity: 1,400 kg, lifting height: 3,000 mm, fuel type: electric, mast type: duplex, construction height: 2,250 mm, mileage: 3,457 km, This electric stacker from the Danish brand BV is in good condition; The capacity is 1,400 kg; The stacker lifts up to XXX mm in height; Drive-through height is 2,250 mm; 3,457 hours on the counter; Equipped with long forks of 1,520 mm; Fitted with an INITIAL LIFT, making it ideal for uneven floors; The battery comes with an external charger; Schedule an appointment for a test drive. Video to follow. Lodsxp Nflspfx Ab Usah

Condition: used, WEBSTER BENNETT EH 48” VERTICAL BORER WITH ELEVATING RAIL MAKE WEBSTER BENNETT, MADE IN ENGLAND MODEL EH 48 TABLE SIZE 1219 mm SWING 1524 mm HEIGHT UNDER CROSS SLIDE 1156 mm CROSS SLIDE RISE & FALL 559 mm TURRET RISE & FALL 914 mm TURRET TRAVERSE 914 mm SPEED 8.6 – 192 RPM FEED RATE 0.0050” – 0.250” / 0.127 – 6.035 mm/min PLUS HIGH SPEED MACHINE NEWALL 2 AXIS READOUT SET OF CHUCK JAWS Ledpfx Aexcn Hujb Ujah

Condition: used, functionality: fully functional, Vertical insulated stainless steel tank Exterior dimensions: Dia Ø 2850/3000 mm, total height 5500 mm. Vertical, insulated stainless steel tanks – 2 units. Capacity: 30,000 L 50 mm insulation, completed with aluminium TRP plates. Conical bottom with 3" outlet. Conical top with ventilation. Manhole in lower part of the cylinder. Brand: Gjettermann & Nielsen A/S Laodpfx Aboxp Hihj Ujh Quality: AISI 316 (V4A).

Condition: like new (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 36,000 rpm, operating hours of spindle: 4,651 h, spindle nose: HSK 50, number of spindles: 15, Equipment: CE marking, documentation/manual, VERTICAL MACHINING CENTER MIKRON MODEL HSM 800 X-AXIS TRAVEL 800 mm Y-AXIS TRAVEL 600 mm Z-AXIS TRAVEL 500 mm SPINDLE HSK E 50 SPINDLE SPEED 36,000 RPM WORKPIECE PROBE LASER MEASUREMENT SYSTEM OPERATION AND MAINTENANCE MANUALS CE CERTIFICATION CNC HEIDENHAIN iTNC 530 Lasdpfxjw U T Szo Ab Ush REMOTE HANDWHEEL SIEMENS MOTORS AND DRIVES HEIDENHAIN LINEAR GLASS SCALE MEASURING SYSTEM TOTAL OPERATING HOURS: 6447 SPINDLE HOURS: 4651

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, workpiece weight (max.): 200 kg, table width: 500 mm, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, For sale: HAAS UMC-500 5-Axis Universal Machining Center Condition: Absolutely brand new machine. Only one part was produced for test machining. The equipment has been unused and stored for 2 years. Main technical specifications Travel: X-axis: 610 mm Y-axis: 406 mm Z-axis: 406 mm Table: Diameter: 500 mm Maximum workpiece weight: 200 kg 5-axis rotary/trunnion table (trunnion type) Spindle: Inline direct-drive 10,000 rpm 30 HP (22.4 kW) CAT 40 taper (40T) Through-spindle coolant: 300 psi (21 bar) Tool changer: 30 tool positions Side-mount, high speed Precision and compensation: Temperature compensation DWO/TCPC – Dynamic Work Offset and Tool Center Point Control Rigid Tapping Equipment and features: Laedpfx Aoxg Nd Njb Ueh Haas NGC CNC control (FANUC compatible) 1 GB memory Ethernet connection, WiFi connectivity USB port, color 15” LCD display Early power-failure detection module Memory lock (keyswitch) Spindle coolant system Protective enclosure with doors Internal lighting Centralized lubrication system Top cover Measurement and calibration equipment: Renishaw WIPS wireless intuitive probing system (Haas Visual Programming System, macros, spindle orientation, coordinate rotation and scaling) Rotary-Axis calibration tool RJH remote jog handle with color display Chip and coolant systems: Coolant tank – 95 gallons (360 L) Initial fill with Blaser coolant emulsion Chip conveyor (belt type – CONVEYOR-H) High-pressure air system Documentation: Original machine documentation (in English) Application Haas UMC-500 is a compact yet powerful universal 5-axis machining center designed for the production of complex, multi-sided, and free-form surface parts. Suitable for simultaneous 5-axis machining as well as 3+2 machining, significantly reducing setup operations and ensuring high accuracy. If you have further questions, we are happy to assist.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, Control Unit Brand SIEMENS Model 840 D Main Drive Tool taper IMS 76 Number of axis 3 Lajdpsxpytgefx Ab Uoh This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2018, operating hours: 696 h, load capacity: 1,400 kg, lifting height: 5,016 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, mileage: 696 km, This Still electric triplex stacker from 2018 is in tidy condition; ONLY 696 hours. The capacity is 1,400 kg. The stacker lifts up to a height of 5,016 mm. Clearance height is 2,165 mm. Equipped with FREELIFT. The battery is fitted with an automatic filling system and an external charger. Schedule an appointment for a test drive. Video to follow. Lodpfx Aboxp Ndzj Usah

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER Lodpfx Aexp Na Njb Ujah MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Laodpsu Idmvjfx Ab Ueh Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: ready for operation (used), Year of construction: 2016, - USED - 3-AXIS TRAVELLING COLUMN VERTICAL MACHINING CENTRE X-AXIS TRAVEL: 2050 mm Y-AXIS TRAVEL: 550 mm Z-AXIS TRAVEL: 560 mm DISTANCE SPINDLE NOSE-TABLE: 180-740 mm DISTANCE COLUMN-SPINDLE AXIS: 638 mm RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: BT-40 ; 15-18,5 kW; 12000 rpm TABLE SIZE: 550 x 2500 mm MAX ADMITTED LOAD: 1200 Kg HIGH PRESSURE COOLANT: 20 Bar TOOL MAGAZINE: 40 POS; CHAIN-TYPE MAX TOOL DIAMETER: 80 mm Laedpfx Absxn U Rdj Ujh MAX TOOL LENGHT: 350 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 0i-MF WEIGHT: 9050 Kg OVERALL DIMENSIONS: 5300 x 3430 x 3045 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE: SEPARATORE TAVOLA PER LAVORAZIONI IN PENDOLARE

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 352 h, load capacity: 1,600 kg, lifting height: 4,352 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 1,980 mm, drive type: Elektro, High-lift pallet truck Mast type: Triplex Transmission: Automatic Condition: As new Technical condition: Very good Front tire type: Polyurethane Front tire condition: 80 - 100% Lodpfx Ajwiavwsb Uoah Rear tire type: Polyurethane Rear tire condition: 80 - 100% Battery voltage: 24V Battery year: 2020 Description: Price includes new UVV inspection, new paintwork, the machine is as new according to the operating hours, battery reconditioned with a power cycler / Kappa test shows 95% capacity after regeneration (see photo), matching charger with plug, initial lift, full free lift, CE certificate.

Condition: used, Table diameter: 800 mm, 3-jaw chuck, diameter: 400 mm, machine lamp, stroke: approx. 600 mm Laodpfx Abexpy Hge Ueh

Condition: good (used), Year of construction: 2018, operating hours: 724 h, load capacity: 1,400 kg, lifting height: 4,716 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, mileage: 724 km, This Still electric triplex stacker from 2018 is in neat condition; ONLY 724 hours. The capacity is 1,400 kg; The stacker lifts up to a height of 4,716 mm; Drive-through height is 2,065 mm; Equipped with FREELIFT; The battery is fitted with an automatic filling system and an external charger; Arrange an appointment for a test drive. Video to follow. Laodpfxoxp Ndus Ab Uoh

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm Ledpju Iddnjfx Ab Uoah control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: ready for operation (used), Year of construction: 2011, - USED - TWIN-SPINDLE HEAD 3-AXIS VERTICAL MACHINING CENTRE WITH ROTOPALLET X-AXIS TRAVEL: 520 mm Y-AXIS TRAVEL: 360 mm Z-AXIS TRAVEL: 360 mm DISTANCE SPINDLE NOSE-TABLE: 200-560 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 36 - 10500 rpm; 30 - 35 kW; HSK A63 PALLET: N.2 MAX ADMITTED LOAD: 450 Kg TOOL MAGAZINE: 21X2 POS MAX TOOL DIAMETER: 88 (125) mm MAX TOOL LENGHT: 250 mm CONTROL UNIT: FANUC 31i A5 WEIGHT: 5300 Kg OVERALL DIMENSIONS: 3200 x 3250 x 3245 mm ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT PUMP ; PAPER FILTER ; TOOL SETTER Laedpfx Absi Hmm Se Ush NOTE: WITH No 1 4th AXIS TABLE

Condition: good (used), Year of construction: 2018, operating hours: 4,576 h, load capacity: 1,400 kg, lifting height: 5,016 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, mileage: 4,576 km, This 2018 Still electric triplex stacker is in neat condition; 4,576 hours on the meter; The capacity is 1,400 kg; The stacker lifts up to a height of 5,016 mm; Drive-through height is 2,165 mm; Equipped with FREELIFT; The battery is fitted with an automatic filling system and an external charger; Schedule an appointment for a test drive. Video to follow. Laodoxp Ncqopfx Ab Ueh

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm Laodpfx Aoq Nqkxsb Ueh MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: good (used), Year of construction: 2018, operating hours: 1,438 h, load capacity: 1,000 kg, lifting height: 2,924 mm, fuel type: electric, mast type: duplex, construction height: 2,015 mm, mileage: 1,438 km, This compact stacker from STILL is from 2018 and is in good condition; Capacity 1,000 kg; Lifting height 2,924 mm; Overall height 2,015 mm; ONLY 1,438 hours on the clock; Equipped with a battery and external charger. Video to follow. Ljdpfjxp Nbyjx Ab Usah

Condition: ready for operation (used), Year of construction: 2019, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1360 mm Ljdpfx Abonzn I Ej Usah Y-AXIS TRAVEL: 700 mm Z-AXIS TRAVEL: 700 mm DISTANCE SPINDLE NOSE-TABLE: 100-800 mm DISTANCE COLUMN-SPINDLE AXIS: 792 mm RAPID FEEDS X-Y-Z: 32 m/min SPINDLE: 12000 rpm; 11-16.5-20-28 kW; BBT-40 TABLE SIZE: 1400 x 700 mm MAX ADMITTED LOAD: 1000 Kg HIGH PRESSURE COOLANT: 20 Bar TOOL MAGAZINE: CHAIN-TYPE ; 30 POS MAX TOOL DIAMETER: 75 (150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 7 Kg CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 9000 Kg OVERALL DIMENSIONS: 4670 x 2985 x 3105 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; USB PORT ; PORTABLE HANDWHEEL

Condition: good (used), Year of construction: 2006, operating hours: 4,493 h, load capacity: 1,250 kg, lifting height: 5,000 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, mileage: 4,493 km, This electric TRIPLEX stacker from TOYOTA, year 2006, is in good condition. The stacker has a capacity of 1,250 kg. Lifting height up to 5,000 mm. The overall lowered height is 2,150 mm. The hour meter shows 4,493 hours. Equipped with FREELIFT. The battery comes with an external charger and an automatic filling system. Order the stacker via our webshop or schedule a test drive! Video to follow. Ljdpfoxp Nbgjx Ab Ujah

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,117 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1300 mm Y-AXIS TRAVEL: 670 mm Z-AXIS TRAVEL: 625 mm Lajdpfow Dkflsx Ab Uoh DISTANCE SPINDLE NOSE-TABLE: 150-775 mm RAPID FEEDS X-Y-Z: 36 - 36 - 30 m/min SPINDLE: 12000 rpm; 11-18,5 kW; 117,8 Nm; ISO 40 - DIN TABLE SIZE: 1500 x 670 mm MAX ADMITTED LOAD: 1300 Kg TOOL MAGAZINE: BASKET-TYPE ; 30 POS MAX TOOL DIAMETER: 76 (125) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC i Series Plus WEIGHT: 8500 Kg OVERALL DIMENSIONS: 2600 x 3350 x 3120 mm ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT ; PCMCIA SERIAL PORT ; USB PORT ; PORTABLE HANDWHEEL NOTE: 4TH-AXIS PRE-SET

Condition: ready for operation (used), Year of construction: 2018, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 1100 mm Laodpfx Abjwh Dg Rj Uoh Y-AXIS TRAVEL: 560 mm Z-AXIS TRAVEL: 510 mm DISTANCE SPINDLE NOSE-TABLE: 120-630 mm RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: 20 - 12000 rpm; 9 - 13 kW; ISO 40 - DIN TABLE SIZE: 1400 x 560 mm MAX ADMITTED LOAD: 1000 Kg HIGH PRESSURE COOLANT: 12 Bar TOOL MAGAZINE: CHAIN-TYPE ; 30 POS CONTROL UNIT: HEIDENHAIN TNC 620 WEIGHT: 5830 Kg OVERALL DIMENSIONS: 4028 x 2750 x 2950 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL NOTE: WITH No 30 TOOLS-HOLDERS ISO 40