Used Vertical Stacker for sale (9,246)

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm Lsdpfev U T Dyox Ab Usah workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Condition: used, Year of construction: 2011, x-travel 635 mm y-travel 510 mm z-travel 460 mm Control Heidenhain TNC 620 turning speed range 20 - 8.000 U/min number of tool places 20 Pos. tool taper SK 40 table surface area 790 x 560 mm spindle drive 13 kW Number of working hours ca. 3.870 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Laedpfx Abexp R Egj Ujh Technical Features & Accessories: - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 1968, load capacity: 1,500 kg, lifting height: 2,950 mm, fuel type: electric, mast type: duplex, Obtained through trade-in Lasdpfx Abewplx Ds Ueh This electric wide track stacker from the Jungheinrich brand is in good condition;Capacity is 1,500 kg;Lifts to a height of 2,950 mm;Battery equipped with external charger;Distance between outer forks is 95 cmWatch the video on YouTube

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit Ledsu Idfrjpfx Ab Ueah -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Year of construction: 2011, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Siemens SlimLine Shopmill C-Axis 360 ° b-axis -5/+110 ° spindle tunring speed 8.000 U/min number of tool places 16 Pos. table surface area 630 x 500 mm spindle drive 13 kW Number of working hours ca. 30.900 h spindle hours ca. 300 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled - approximately 300 spindle hours Accessories, tools, and clamping devices shown are only included in the Lasdoxp R D Aepfx Ab Ush scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2019, operating hours: 5,828 h, load capacity: 2,000 kg, lifting height: 1,574 mm, fuel type: electric, mast type: duplex, empty load weight: 1,300 kg, mileage: 5,828 km, This electric DUO ride-on stacker from the German brand Linde is from 2019 and is in good condition; Capacity is 2,000 kg; Lifts up to a height of 1,574 mm; 5,828 hours on the meter; Battery from 2019 equipped with an automatic filling system and an external charger; Dealer-maintained at LINDE; Video to follow. Ljdpfow Tlccox Ab Ujah

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm Lajdju Ngybepfx Ab Uoh - control panel i.D. *

Condition: good (used), Year of construction: 2020, operating hours: 7,048 h, load capacity: 1,300 kg, lifting height: 5,500 mm, fuel type: electric, mast type: triplex, construction height: 2,390 mm, empty load weight: 1,500 kg, mileage: 7,048 km, This electric TRIPLEX stacker from the ACTIL brand comes from 2020 and is in good condition;The stacker has a capacity of 1,300 kg;Lifts to a height of 5,500 mm;The drive-through height is 2,390 mm;7,048 hours on the counter;The battery is equipped with an external charger;Order the stacker via our webshop or make an appointment for a test drive!Watch the video on YouTube Lajdpfx Abswn Egfe Ujh

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 Laodpou Ndbpjfx Ab Ueh turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. *

Condition: good (used), Year of construction: 2017, operating hours: 2,857 h, load capacity: 1,400 kg, lifting height: 5,316 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, empty load weight: 1,550 kg, mileage: 2,857 km, This electric triplex stacker by Still from 2017 is in very neat condition; ONLY 2,857 hours. The capacity is 1,400 kg; The stacker lifts to a height of 5,316 mm; Overall height 2,265 mm; Equipped with INITIAL LIFT, making it ideal for uneven floors; Equipped with FREELIFT; The battery has an automatic filling system and an external charger; Schedule an appointment for a test drive. Watch the video on YouTube. Laedpfx Aew Sndaob Ueh

Condition: used, Technical details: x-travel: 880 mm y-travel: 300 mm z-travel: 900 mm w-axis: 60 mm spindle head swivable left - right: 60 ° table surface area: 880 x 300 mm Laodpfx Aju Ndfhjb Uoh machine weight approx.: 1200 kg dimension machine xH: 1,3 x 1,4 x 1,9 m incl. accessories *

Condition: good (used), Year of construction: 2018, operating hours: 2,152 h, load capacity: 1,400 kg, lifting height: 5,016 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, empty load weight: 1,600 kg, mileage: 2,152 km, This electric triplex stacker by Still from 2018 is in very neat condition; ONLY 2,152 hours. The capacity is 1,400 kg; The stacker lifts up to a height of 5,016 mm; Overhead clearance 2,165 mm; Equipped with FREELIFT; The 2018 battery features an automatic filling system and an external charger. Schedule an appointment for a test drive. Watch the video on YouTube. Lajdpfow Snc Aex Ab Ueh

Condition: used, Year of construction: 1976, Technical details: table surface area: 1300 x 190 mm range of revolution per miute: 60 - 4000 Stufenlos U/min feed continuous: Pinole: 0,06 / 0,12 / 0,24 mm/U quill stroke vertical: 140 mm spindle taper: SK 40 spindle head swivable left - right: 90° und 45° ° total power requirement: 3,0 kW weight of the machine ca.: 1620 kg machine dimensions LxWxH: 2,7 x 2,3 x 2,4 m Milling machine with universal milling head Spindle run right/left Table specifications: X/Y/Z travel: 860/380/460mm. feed X/Y/Z: 40 - 400mm/min. continuous rapid traverse 400mm/min. max. workpiece weight 30kg Equipment Lasdpou Sq Emjfx Ab Ush 3-way measuring display Mitutoyo with beam machine lighting Coolant tank with pump X- and Y-axis feed adjustable incl. accessories comparable to the picture *

Condition: used, Year of construction: 1990, Technical details: x-travel: 185 mm y-travel: 95 mm z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 interface: R 232 table surface area: ca. 420 x 125 mm total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection Ljdovc Awrepfx Ab Ujah *

Condition: used, Year of construction: 2013, Technical details: x-travel: 760 mm y-travel: 460 mm z-travel: 460 mm control: Heidenhain TNC 620 switched on hours: 20246 h spindle hours: 7724 h number of spindle speeds: 12.000 U/min. max. torque on the spindle: 75 - 95 Nm spindle taper MT: SK40 tool changer with: 24 Plätze table-size: 900 x 410 mm max. table load: 350 kg feed range: k.A. rapid traverse:: 36 m/min interface: RS232 control voltage: 24 DC V air-pressure connection: 6 / 8 bar total power requirement: 20 kVA Weight approx.: ca. 6,0 t Ledpsvhbpdjfx Ab Ueah dimension coolant device: 1,7 x 0,7 x 1,35 m dimension machine xH: 1,9 x 2,3 x 2,45 m TNC620 (contouring control with up to 5 controlled axes, particularly suitable for universal milling), can be integrated into the network Safety doors with impact-resistant plastic window panes Chip conveyor Hydraulic unit Coolant preparation system Rittal cooling system on the control cabinet Work area Interior lighting *

Condition: used, Year of construction: 2007, Technical details: x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm distance spindle /table: 125 / 925 mm control: Heidenhain iTNC 530 number of spindle speeds: 9000 steples U/min. max. torque on the spindle: max.82 Nm switched on hours: 43363 h spindle hours: 16319 h tool changer with: 24 Plätze table-size: 1250 x 630 (Kreuzschiebetisch) mm max. table load: 1000 kg spindle taper MT: SK40 spindle drive: 13 kW feed range: X/Y/Z: 40/40/30 m/min rapid traverse:: X/Y/Z: 40/40/30 m/min feed power: X/Y/Z: 7/7/16 kN interface: ja total power requirement: 13 kW Weight approx.: 8,0 t dimension coolant device: ca. L:1,25 x B: 0,7 x H: 1,56 m dimension machine xH: 2,4 x 3,0 x 3,3 m Ledpfovithzsx Ab Usah Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872 Drive technology via ball screw drive Equipment: Compact filter/coolant high-pressure system Knoll Chip conveyor/scraper belt conveyor 300mm Tool changing unit with disk magazine for 24 tools Electronic handwheel Operation via Heidenhain control panel Accessories: AL plate 1200x600x45mm with holes Ø 15mm *

Condition: used, Accessories for e.g. a bench drill BFT 130: Laodpfxju Nlgyj Ab Ueh The spindle head and swivel angle can be swivelled 360° around their own axes. Two swivel planes The set angles can be read off on circumferential scales Speed max. 600 rpm. Spindle taper ISO 50 Weight approx. 270kg incl. connecting piece to the drive SK 50 pinoler/head *

Condition: used, Year of construction: 1981, Technical details: x-travel: 400 mm y-travel: 420 mm z-travel: 380 mm table surface area: 710 x 400 mm max. table load: 120 kg range of revolution per miute: 45 - 2240 / 18 step U/min feed continuous: 6,3 - 600 / 2 steples mm/min Lodeu Nc Hkopfx Ab Ueah quill stroke vertical: 100 mm quill stroke: horizontal: 100 mm spindle taper: vertical/horizontal: SK 40/SK40 spindle head swivable left - right: 90 ° distance table/horizontal spindle: min./max.: 200 / 325 mm distance table/vertical head: min./max.: 150 / 730 mm total power requirement: 5,5 kW weight of the machine ca.: 1,95 kg machine dimensions LxWxH: 1,7 x 1,4 x 1,9 m dimensions electric cabinet: 850x500x1500 mm The milling machine is equipped with a 3-measuring path display. incl. machine feet and operating instructions *

Condition: used, Technical details: x-travel: 1600 mm y-travel: 400 mm z-travel: 400 mm w-axis: 100 mm control: Sienumerik spindle taper ISO: SK50 spindle head swivable left - right: manuel ° Table dimensions: 1600 x 400 mm machine weight approx.: 4000 kg dimension machine xH: 2,0 x 2,33 x 2,5 m Laedpfx Abju Nddwo Ueh with 3-way digital measuring range display incl. accessories/tools with holder *

Year of construction: 1948, condition: used, Technical details: max. ram stroke: 180 mm adjustment of stroke: 100 mm Lasdpfx Aou Ng Tnsb Ujh no. of ram strokes: 45 / 73 / 125 Hub/min distance table/ram: 400 mm work table:: 650 x 250 mm total power requirement: 2,0 kW voltage: 380 V dimension machine xH: 1,3 x 1,0 x 1,9 m VERTICAL BROACHING MACHINE for the machining of keyways on flanges and/or bushes table adjustment: lengthwise=420 mm manual / 400 mm automatic, crosswise=150mm; vertical=300mm mechan. Drive The stroke is adjusted on the crank disk by means of a threaded spindle. Inclined position of the ram guide with ram 10° Rotation of the drive disk per min. = 400 rpm. The machine does not comply with the legal safety requirements of the UVV (UVV = accident prevention regulations) . Sold as is, without test. *

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Lsdpfx Absu Nilyj Uoah Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *

Condition: used, Year of construction: 1980, Technical details: x-travel: 820 mm y-travel: 300 mm z-travel: 485 mm spindle taper ISO: SK 40 spindle head swivable left - right: 0 - 45° rechts/links ° quill travel: 80 mm range of revolution per miute: 56 - 355 und 450 - 2800 U/min Ledpfx Ajwtct Teb Ujah feed:: X/Y: 10 - 80 und 80 - 630 mm/min rapid traverse : X/Y: 3150mm mm/min Table dimensions: 1700 x 400 mm table surface area: 1120 x 205 mm total power requirement: 7,5 kW kW machine weight approx.: 2120 kg dimension machine xH: 1,7 x 1,7 x 2.5 m additional features: -Table adjustment via machine see X/Y and Z data -table adjustment by hand X/Y/Z: 850/330/505mm milling arbor reception max. Ø 40mm operation via control panel incl. 4 pieces foot plates *

Condition: used, Technical details: Laodpfxev U Un Hs Ab Uoh z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: used, Year of construction: 1983, Technical details: throat: 315 mm throat in width: 310 mm throat in - height: 230 mm Lsdpfx Absva E E To Ujah saw band length: 2530 - 2650 mm saw band width: 13 mm band speed: 12 - 750 m/min Table dimensions: 500 x 500 mm table height over floor: 950 mm total power requirement: 1,3 kW machine weight approx.: 450 kg dimension machine xH: 0,8 x 0,7 x 1,65 m Steel and metal band saw Filing band length 2550 mm Additional equipment: Saw band processing Ideal -> saw band cutting device-saw band welding device-saw band grinding device Cooling via spray feeder Foot control Accessories -div. saw bands -1x running wheel Ø 320 mm -Saw band by the meter RRR Roentgen *

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm Laodpfx Abevc Avbs Ueh rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *