Used Vertical Saw for sale (11,952)

Condition: new, Wheel diameter 400 mm Cutting height 200 mm cutting width 350 mm Motor output 1,5 kW Table dimensions 400 x 500 mm Table tiltable 45 Grad saw band length 2950 mm machine weight ab. 150 kg Iaedpfx Aou Imncsquju Dimensions (L/W/H) 700 x 600 x 1800 mm wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a miter guide and is supplied with a saw band.

Condition: used, roll diameter 500 mm throat 490 mm workpiece height 220 mm table-size 600 x 600 mm Iodpfoqux Syox Aqusau saw band length 3350 mm turning speeds 12 - 1900 m/min total power requirement kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,2 x 0,8 x 1,95 m Band saw with - swivel table - Footswitch - Machine light - IDEAL welding device

Condition: new, Year of construction: 2020, machine/vehicle number: MR006644, This SVP950 is a powerful vertical panel saw. The machine is equipped with, among other features, variable speed control on the saw unit. This SVP950 is a robust vertical panel saw machine. It features variable speed control on the saw unit and is equipped with digital readouts for both horizontal and vertical cutting. The SVP950 offers a cutting depth of 80 mm and is powered by a strong 7.5 HP motor, making it suitable for processing thicker materials. It is also suitable for plastics, where a lower speed is desired. This is an ex-showroom machine directly from the manufacturer, allowing us to offer it at a competitive price with a full new-machine warranty. The machine is equipped with the following options: - Rear support wall for small workpieces - Variable speed: 2,000 – 6,000 rpm - Electronic display for horizontal measurement indication Ijdpfsx S U I Hsx Aquoau - Electronic display for vertical measurement indication - ECO extraction system: channeled extraction during vertical cutting Technical specifications: - Maximum cutting length: 5300 mm - Maximum cutting height (horizontal): 2100 mm - Maximum cutting height (vertical): 2200 mm - Maximum cutting depth: 80 mm - Maximum saw blade diameter: 300 mm - Motor power: 7.5 HP - Serial number: 20950017

Condition: excellent (used), Year of construction: 2011, Vertical Wood Band Saw PROMAC SW-430 Throat depth: 400 mm Table size: Depth 600 mm x Width 430 mm Tilting table from 0 to 40° Iodsxyd Szepfx Aqujau Blades dimensions: Length 3330 x 15 mm x thickness 0,6 mm Maxi cutting height: 200 mm Steering wheels diameter: Ø 430 mm Voltage: 380 V Motor: 1,5 kW Width: 800 mm Depth: 900 mm Height: 1900 mm Weight: approx 150 KG Year of construction: 2011 (machine in very good condition) Supplied with 2 spare blades

Condition: good (used), Year of construction: 1985, machine/vehicle number: 19378, functionality: fully functional, operating hours: 20,656 h, power: 4.4 kW (5.98 HP), saw blade diameter: 315 mm, cutting depth: 80 mm, feed length X-axis: 5,300 mm, feed length Y-axis: 2,200 mm, feed length Z-axis: 80 mm, Types: Standard 6220 A, Machine no.: 13981, Year of manufacture: 1985, Voltage: 3/380V/50Hz, Motor: 4.4 kW (5.5 HP), 2880 rpm. Operating hours: 20,656, 2x digital measurement V+H, cutting capacity: 5300x2200x80 mm Iajdex N Tztspfx Aquou

Condition: used, Year of construction: 2002, machine/vehicle number: 19711, functionality: fully functional, power: 4.5 kW (6.12 HP), cutting height (max.): 2,200 mm, saw blade diameter: 294 mm, overall weight: 1,050 kg, cutting length (max.): 5,300 mm, collet bore: 30 mm, The vertical panel saw features a solid and compact structure to ensure stability during operation. This configuration allows for consistently high cutting quality, even on large or particularly challenging materials, delivering smooth and linear movements for safe and efficient work. The machine is supplied with 29 blades, each with 50% remaining service life. Iedpfswqmyrjx Aqueau Transport not included.

Condition: good (used), Year of construction: 1994, Panel saw Manufacturer: Striebig Model: TRK 3 5220A Year of manufacture: 1994 Cutting length: 430 cm Cutting height: 220 cm Ijdpfxjxwb Sge Aqusau Cutting depth: 80 mm Power: 4.4 kW Saw blade diameter: 300 mm Speed: 4,750 rpm

Condition: used, Year of construction: 1991, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 400 V, input frequency: 50 Hz, HEMA SR500 Bandsaw – Industrial Quality Made in Germany Technical Specifications Manufacturer: HEMA Model: SR500 Machine type: Vertical bandsaw Wheel diameter: 500 mm Iasdpfx Aqjy Sgc Nouju Motor power: approx. 2.2 kW Voltage: 400 V Blade length: approx. 4,080 mm Tilting table Upper and lower blade guides Precision, low-vibration industrial design Description For sale is a HEMA SR500 bandsaw constructed for demanding industrial applications. This machine is ideally suited for precise cutting operations in wood, plastics, and similar materials. Thanks to its stable build and high-quality blade guides, the bandsaw delivers exceptionally smooth operation and precise cutting results. The HEMA SR500 is ideal for joineries, carpentry shops, training workshops, or demanding trade businesses. The tilting work table offers flexible use for both straight and curved cuts. The machine is offered in used condition with age-appropriate signs of wear, but is technically fully functional. Equipment Robust work table Precision blade guides Safety cover 400 V three-phase connection Numerous spare blades included Heavy-duty industrial quality "Made in Germany" Machine dimensions: Height: approx. 2,000 mm Width: approx. 950 mm Depth: approx. 700 mm Weight: approx. 250 kg

Condition: new, Year of construction: 2026, Vertical Bandsaw - Industrial Machine A proven industrial machine! Successfully sold throughout Europe. A heavy-duty, professional, easy-to-use bandsaw with a durable construction. It allows for precise setting of work parameters, which directly impacts cutting efficiency. The quick tensioning lever is also used for quick removal of the blade. A precise cast iron machine table with a ground and polished surface. Adjustable table tilt from -10° to 45°. A window for easy reading of the blade tension. Technical Data: Iajdpfx Aqovugtnsueu Wheel diameter [mm]: 680 Maximum cutting height [mm]: 430 Maximum cutting width [mm]: 700 Worktable dimensions (L x W) [mm]: 790 x 500 Worktable tilt [°]: -5 - 45 Blade width [mm]: 19 - 40 Blade length [mm]: 5020 Belt speed [m/s]: 18 Dimensions (L x W x H) [mm]: 1090 x 700 x 2430 Weight [kg]: 308 Motor power (S1/S6) [kW]: 4.0 / 5.6 Dust extraction ports [mm]: 2 x 100 Power supply: 3-phase, 400V Note: The price quoted is the net price. It does not include transportation costs.

Condition: excellent (used), functionality: fully functional, power: 1.47 kW (2.00 HP), input voltage: 200 V, cutting height (max.): 1,000 mm, empty load weight: 740 kg, throat depth: 1,000 mm, Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Iodpfswr Nlyjx Aqujau Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

Condition: used, machine/vehicle number: 12304, functionality: fully functional, actuation type: electric, Equipment: rotational speed infinitely variable, For sale is a high-quality and robust industrial bandsaw, manufacturer THIEL SEGURA 117. The machine is produced by Gebrüder THIEL GmbH, Sand near Kassel, and impresses with its solid construction and classic German industrial quality. Technical data (according to nameplate): Model: THIEL SEGURA 117 Machine ID: 12304 Machine Specifications Wheel diameter: 300 mm Throat: 450–500 mm Max. workpiece height: 220 mm Table size: 600 × 600 mm Tilting table: yes, partially in 2 directions Saw blade length: 3350 mm Saw blade width: approx. 10 mm Blade speed: 15 – 125 m/min or 125 – 1000 m/min partially infinitely variable Weight: approx. 700 kg Dimensions: approx. 1.0 × 0.7 × 1.8 m Equipment: -integrated bandsaw blade welder (IDEAL BS00) -grinding stone for deburring the weld seam Iodpfx Aoy Sf Udoquoau -infinite speed control All technical data without guarantee.

Condition: good (used), Roll diameter 483 mm Cut range Horizontal 457 mm Vertical 508 mm Cutting length 356 mm Isdpfx Aeu R Ryusquoau Misc. Accessories MARCELS MASCHINEN AG

Condition: new, Year of construction: 2026, Vertical Bandsaw with Laser Guide A simple-to-use bandsaw with a durable construction. It allows for precise adjustment of work parameters, which directly impacts cutting efficiency. The quick tensioning lever is also used for quickly removing the blade. Precise cast iron machine table. Adjustable table tilt from -10° to 45°. A window for easy reading of the blade tension. Two cutting speeds selected via a stepped pulley. Iedpfsvugwasx Aquoau Technical Data: Wheel diameter [mm]: 480 Maximum cutting height [mm]: 280 Maximum cutting width [mm]: 465 Blade width [mm]: 9.5 to 38.1 Blade length [mm]: 3605 Belt speed (2 speeds) [m/s]: 7/14 Worktable angle adjustment [°]: from -10 to +45 Worktable dimensions (L x W) [mm]: 630 x 480 Dimensions (L x W x H) [mm]: 830 x 550 x 2070 Weight [kg]: 162 Motor power [kW]: s1-2.2kW, s6-3.1kW Power supply: 3-phase, 400V Note: The price quoted is the net price. It does not include transportation costs.

Condition: new, Year of construction: 2026, The CORMAK HBS421 wood band saw is designed in a vertical configuration, allowing convenient material guidance across the table and enabling both straight and curved cuts. In production environments, rigidity is crucial—therefore, the body and main structural components ensure stable wheel alignment and, consequently, smooth and accurate blade tracking. Drive Wheels and Blade Guidance In professional band saws, cutting quality largely depends on the geometry of the blade guidance system. Properly selected drive wheels ensure correct blade operation along its entire length, reduce slippage, and limit localized overloads. In practice, this results in: Reduced vibration at higher feed rates Improved edge quality—especially in harder wood species Extended blade life thanks to stable operation and correct tension Worktable and Angle Adjustment The worktable provides material support and cutting repeatability. In the CORMAK HBS421 wood band saw, both stability and adjustment capability are essential, allowing for angled cuts. This solution is particularly valued in carpentry workshops where quick transitions between different operations (sizing, structural component preparation, trimming) are required. Drive System and Continuous Operation The band saw drive system is designed for load-intensive operation, while the three-phase power supply enhances smooth running and torque stability. As a result, this vertical wood band saw maintains cutting performance even when processing thicker materials—an important factor in serial production. Adjustable blade speeds allow optimization for specific tasks, reducing edge burning and improving cutting control. Dust Extraction and Workstation Ergonomics Cutting wood generates significant amounts of dust and chips. The integrated dust extraction port enables connection to an extraction system, which significantly improves: Work safety (reduced airborne dust) Visibility of the cutting line Iodjyk Apnspfx Aqueau Service life of working components by limiting dust accumulation Precision and Productivity In industrial practice, it is not only the ability to cut material that matters, but also maintaining repeatability. The rigid construction, stable blade guidance, and controlled blade tension ensure straight cuts and reduce the need for corrections in subsequent processes (planing, sanding, fitting). As a result, the CORMAK vertical wood band saw supports shorter production cycles and minimizes material waste. Standard Equipment High-voltage release switch Dust extraction port 2 × 100 mm Precision rip fence Cutting blade 3345 × 20 mm, 8 TPI Optional Equipment 100 mm extraction hose Galvanized clamp Mobile base (up to 260 kg capacity) Technical Specifications Wheel diameter [mm]: 480 Maximum cutting height [mm]: 240 Maximum cutting width [mm]: 405 Blade width [mm]: 9.5 – 38.1 Blade length [mm]: 3345 Blade speed [m/s]: 7 / 14 Table tilt range [°]: 0 to +45 Table dimensions [mm]: 535 × 435 Overall dimensions [mm]: 830 × 550 × 2070 Weight [kg]: 160 Motor power: S1 – 2.2 kW / S6 – 3.1 kW Power supply: 3-phase, 400 V Manual (DTR): Yes CE Declaration: Yes

Condition: new, Year of construction: 2026, The CORMAK HBS321 vertical wood band saw operates in a vertical configuration, providing the operator with full control over guiding the material across the worktable. A key component is its rigid frame, which maintains the geometry of the wheel and guide system. This ensures smooth blade tracking and consistent cutting accuracy. In practice, this means a lower risk of blade drift—particularly important when cutting harder wood species or working at greater cutting heights. 350 mm Wheels and Blade Tracking Control Cast Iron Worktable and Angle Adjustments The band saw features a 545 × 400 mm worktable, providing adequate support for workpieces—essential for precise straight and angled cuts. The table tilt range of 0–45° allows for bevel cuts without the need for additional attachments. The cast iron construction effectively dampens vibrations, helping maintain stable operating parameters. Drive System and Operating Parameters This woodworking band saw is equipped with a motor rated at 1.1 kW (total power), ensuring stable performance for typical carpentry tasks such as ripping, trimming, preparing components for gluing and assembly, and contour cutting. The use of blades with widths ranging from 6–15 mm allows the operator to select the appropriate blade depending on the task—from precise curved cuts to stable straight-line cutting. Laser – Enhanced Control and Reduced Material Waste The integrated laser guide supports quick material alignment and accurate cut tracking. In practice, this reduces the need for test cuts, minimizes material waste, and makes working with detailed elements (e.g., profiled components or shaped cutouts) easier and more efficient. Precision and Work Efficiency In professional applications, repeatability is just as important as cutting capability. The rigid construction, stable table, and quick blade adjustment system reduce machine setup time and limit the need for corrections during subsequent processing stages (planing, sanding, fitting). As a result, the CORMAK HBS321 band saw supports smooth workflow and improves overall process efficiency. Applications The HBS321 wood band saw is designed for a wide range of woodworking and wood-based material applications, including: Cutting boards, squared timber, beams, and glued elements Trimming furniture and carpentry components Angle cutting (using the tilting table) Cutting shapes and profiled elements Workshop use in carpentry shops, craft businesses, and training facilities Technical Specifications Wheel diameter [mm]: 350 Maximum cutting height [mm]: 175 Maximum cutting width [mm]: 300 Worktable dimensions (L × W) [mm]: 500 × 400 Isdpfxoyk Alis Aqueau Table tilt [°]: 0 to +45 Blade width [mm]: 6 to 15 Blade length [mm]: 2240 Blade speed [m/s]: 6 / 12 Overall dimensions (L × W × H) [mm]: 750 × 650 × 1730 Gross weight [kg]: 88 Motor power [kW]: S1 – 0.75 kW / S6 – 1.1 kW Power supply [V]: 230 Manual (DTR): Yes CE Declaration: Yes Standard Equipment On/off switch with low-voltage release Quick blade tension/release lever Precision rip fence Cutting blade 2560 × 10 TPI 6.3

Condition: used, functionality: fully functional, input voltage: 380 V, cutting height (max.): 600 mm, cutting width (max.): 550 mm, control type: manual, actuation type: electric, total height: 2,600 mm, total length: 18,000 mm, total width: 3,500 mm, overall weight: 4,184 kg, Equipment: documentation/manual, motor brake, For sale: JAROMA DRCC-110 vertical wide-band sawmill. This is a saw with a feed carriage, log manipulation system, longitudinal feeder, and log infeed device. Designed for longitudinal cutting of logs into boards and squared timber. Saw wheel diameter: 1100 mm. Cutting speed: 38 m/s. Carriage working speed: 1–40 m/min. Bandsaw width: 130 mm. Very well-suited for cutting curved logs. Includes a cross-feed conveyor for the log storage area. Iajdpfsyqx Uysx Aqusu

Condition: used, Vertical band saw HESKA type ESA 4 make no. 681174 year of construction approx. 1985 roll diameter 420 mm throat 400 mm table size 500 x 500 mm cutting height 285 mm Iajdpfx Aedzqrvjquju saw band length min. 3200 - max. 3400 mm Saw band speed gear stage (1) 15-140 m/min. Saw band speed gear stage (2) 150-1400 m/min. Motor power 1,5 kW mains connection 380 volt, 50 Hz - infinitely variable saw band speed via PIV gear with hand wheel adjustment and 2 gear steps - saw table tiltable in 2 axes - machine light space requirement L x W x H 950 x 750 x 1820 mm weight approx. 500 kg good condition

Condition: used, Vertical band saw JAESPA type MSU 4 make no. 724749 year of construction approx. 1980 roll diameter 420 mm throat 400 mm table size 610 x 610 mm cutting height 260 mm Isdpfxed Nbk Ts Aquoau saw band length min. 3200 - max. 3400 mm saw band speed 10-1500 m/min. infinitely variable mains connection 400 Volt, 50 Hz - infinitely variable saw band speed via 2 gear steps and infinitely variable via belt drive - saw table tiltable - Saw blade butt welding machine IDEAL BS0-16 - saw blade shear - Grinding stone for grinding the weld seam space requirement L x W x H 1000 x 850 x 1850 mm weight 400 kg good condition

Condition: used, Vertical band saw MÖSSNER REKORD type SM 420 Machine No. 17010 Year of construction 1968 roll diameter 420 mm throat width 415 mm throat in height 265 mm table size 605 x 600 mm band speed 18 - 562 m/min. 8 steps saw band length min/max. 3150 / 3260 mm Iaodpfjdzqc Rsx Aqusu drive power 1,1 / 1,7 kW Mains connection 380 V 50 Hz - Saw band speed via 4 gear steps and 2 motor speeds - saw blade butt welding unit IDEAL BS 0-16 with shear and grinding stone - swivelling working table in 2 axes space requirement L x W x H 950 x 750 x 1900 mm weight 570 kg good condition

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year 1975 Iasdpexvrnisfx Aquou with operator control system in the cabin, Bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, Max. saw blade width 310 mm. Bandsaw blade length 11,500 mm Round timber infeed approx. 20 m long, four strands with inserter Block carriage with ejector onto block transverse conveyor CANALI pneumatic log carriage Type 501.09 with 4 clamping claws, 3 log turners, 4 ejectors Drive power 100 kW, carriage speed 5-120 m/min. driven roller conveyor with side board removal with brush, lifter with stripper for cut-out removal Roller conveyor approx. 12 m with lifting stripper for manual stacking Stacking device with turning unit for bundle packaging Lowerable bundle with transverse bundle conveyor Complete electrical control cabinets Full band saw blade sharpening equipment

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg. Isdpfob Rnv Sjx Aqusau

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg Iedpfx Aqexc I Dgjusau It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe Iodeyug R Ropfx Aqujau handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. Ijdpeyug Hxefx Aqujau An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Iedpfx Aqsyr Numsueau Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle