Used Vertical Router for sale (7,765)

Condition: used, machine/vehicle number: 008471, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Pedpeywaf Usfx Ahvjgi Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 008473, X axis working area: 4900 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Pgsdsywaf Iepfx Ahvei Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Pedpfx Aewuclxohvogi Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: used, machine/vehicle number: 008255, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 9 KW Pgjdpfxsx A Td Ee Ahvoi Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: used, Year of construction: 2000, x-travel 1.050 mm y-travel 560 mm z-travel 450 mm Control OKUMA OSP-U100M-H table dimensions 1.300 x 560 mm spindle tunring speed 10.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Pgjdpfx Ahsyxhiwsvji if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 610 mm y-travel 510 mm Pgjdpfxsyxhiqs Ahvei z-travel 610 mm Control MAX5 distance spindle /table 150 - 760 mm table surface area 760 x 510 mm T-slots (number x width x distance) 5 x 18 H8 x 100 mm table load 1.360 kg number of spindle speeds 12.000 spindle drive 9 kW torque 95 Nm tool taper SK-A 40 number of tool places 30 Pos. tool diameter 80 mm Tool diameter with free secondary positions 130 mm tool length - max. 300 mm weight of tools 7 kg auto power on hours ca. 17.626 h spindle hours ca. 900 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The main spindle was replaced a year ago. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 1983, dimensions of the machine ca. 1210 x 1000 x 2070 mmxmmxmm weight - pallet system 1000 kg table-size 800 x 820 mm MÖSSNER SSF/501 Vertical Band Saw Table size: 800 × 820 mm Table travel: approx. 350 mm Pgsdpfeyxhg Aox Ahvji Cutting height under guide: approx. 400 mm Cutting width / reach: approx. 500 mm

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Pgsdpfew Ip Dgex Ahvji Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Includes the cutters and milling bits shown in the pictures Comes with lockable base cabinet, 2 drawers and 1 door; key included The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.”

Condition: used, Pfaudler glass lined vertical reactor manufactured by Pfaudler, model BE6300. Volume: Total approximate capacity: 8190 L Technical features: Model: BE6300 Vessel working pressure: -1/+6 bar Vessel working temperature: -25/+120 ºC Half-coil/jacket working pressure: -1/+6 bar Half-coil/jacket working temperature: -25/+120 ºC Half-coil/jacket volume: 796 L Equipment configuration: -Agitator -Half-coil Podpfx Asyxd D Rshvegi Specifications: Internal pressure: 87 PSI Material of Construction: glass lined

Condition: used, Year of construction: 2002, total length: 5,510 mm, total width: 1,720 mm, total height: 2,920 mm, Weight: 950 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Max. cutting height vertical [mm]: 2150 Podpfx Aex Agv Uehvjgi - Max. cutting height horizontal [mm]: 2070 - Max. cutting width [mm]: 5300 - Max. cutting depth [mm]: 80 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 300 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Power [kW]: 4.0 - Transport dimensions: 5510mm x 1720mm x 2920mm (l x w x h) - Transport weight [kg]: 950kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Pgodpfx Aoku Aaajhvoi Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Code: 0343 Brand: PUTSCH MENICONI Model: SVP 950-M - CE Standard Manual vertical panel saw for carpentry workshops, for vertical and horizontal cutting of panels, semi-finished products, furniture, doors, window frames, plastics and composite materials - CE Standard Technical data: Cutting length 5300 mm Cutting height 2200 mm Pgjdjyxc Tkjpfx Ahvoi Max cutting thickness 80 mm Motor power 7,5 Hp Blade diameter 300 mm Blade speed 5000 rpm Automatic electric sliding table to prevent damage to the support strips during horizontal cuts Small parts support device Liftable castor device for panel sliding Overall dimensions of assembled machine: mm 6500 x 1500 x 3000 h Overall dimensions for transport: Frame mm 6500 x 600 x 2350 h - Weight kg 590 + Column mm 3100 x 1130 x 1150 h - Weight kg 600

Condition: used, Year of construction: 2007, controller model: Ultimax, table width: 355 mm, table length: 760 mm, number of slots in tool magazine: 20, HURCO VM1 Vertical Machining Center The HURCO VM1 is a compact vertical CNC machining center, ideally suited for precise milling operations in single-part and small-batch production. The machine stands out for its robust construction, user-friendly control system, and efficient tool changing capability. Technical Equipment Worktable: 760 mm × 355 mm Equipped with machine vice CNC control: Ultimax Automatic tool changer with 20 tool positions Machine Condition and Design The machine features a fully enclosed safety cabin with large front windows. The control panel, including a display, operation keys, and emergency stop, is mounted on the side for ergonomic access. A chip collection tray is located beneath the working area. Thanks to its compact footprint, the HURCO VM1 is especially suitable for workshops with limited floor space, while still delivering high performance and flexibility. Pedeyxcykopfx Ahvjgi

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 Psdpjx Ahg Ujfx Ahvsgi +++ Note: This machine is part of an online surplus sale! +++

Condition: like new (used), Year of construction: 2019, First installation delayed due to the pandemic in 2021 MAX5 control system with two 19-inch screens Table size 1020 × 510 mm Max. load capacity 1000 kg X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 610 mm Drive power 13 kW Speed ​​range 10 - 12000 rpm ATC magazine 30-positions Spindle type SK40 Pgedpeyxb Dhjfx Ahvei Rapid traverse X/Y/Z = 35 / 35 / 30 m/min Feed rates 3 - 15200 mm/min Weight 4900 kgs Dimensions L x W x H = 2450 x 2650 x 2700 mm Equipment, accessories - Software options: 3D, DXF, NCPP/ISNC Ulti-Motion, Solid Model Import, Job List, Pocket/Island, Rigid tapping, Graphical Simulation - Coolant through spindle 20 bar, - Glass Scales on all axes, - Chip Conveyor - Portal Handwheel - Machine mounts The machine is nearly in new condition. Available for immediate sale. Currently powered up in Hungary.

Year of construction: 2007, condition: ready for operation (used), - USED - 2-AXIS CNC VERTICAL LATHE MAX ROTATING DIAMETER: 450 mm MAX TURNING LENGTH: 150 mm MAX TURNING DIAMETER: 370 mm COUNTER SPINDLE: 4500 rpm; 11-18,5 kW; 210 mm; ASA A2-6 X-AXIS TRAVEL: 260 mm Z-AXIS TRAVEL: 370 mm RAPID FEEDS X-Z: 30 - 30 m/min TURRET HEAD: 12 POS CONTROL UNIT: FANUC 0i-TC WEIGHT: 5000 Kg OVERALL DIMENSIONS: 2300 x 2850 x 2670 mm Pjdpfx Ahoyw Utgjvsgi ACCESSORIES: SWARF CONVEYOR NOTE: No 10 STATIONS STORAGE SYSTEM

Condition: excellent (used), Year of construction: 1996, Control: OSP 700M Travel X/Y/Z: 1050 x 560 x 450 mm Table size: 1300 x 560 mm Spindle speed: 6,000 rpm Tool magazine for 20 tools, BT 50 Chip conveyor Approx. 40 toolholders BT 50 Pjdpfjyw Ui Iex Ahvogi

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: iTNC530, spindle speed (max.): 18,000 rpm, spindle nose: hsk 63, number of spindles: 30, Equipment: chip conveyor, documentation/manual, FPT vertical machining center model RAID Travels 1500X1100X600 mm 30-position tool changer HSK 63 spindle, 18,000 RPM (overhauled in 2025) CNC HEIDENHAIN iTNC 530 Remote electronic handwheel Pgjdex H Iylspfx Ahvsi Chip conveyor

Condition: used, Year of construction: 2019, x-travel 660 mm y-travel 406 mm z-travel 508 mm Control MAX5 distance spindle /table 102 - 610 mm table surface area 762 x 406 mm T-slots (number x width x distance) 3 x 18 H8 x 100 mm table load 682 kg spindle tunring speed 12.000 U/min spindle drive 11 kW torque 61 Nm Pgedpfoyw Tncsx Ahvji tool taper SK 40 number of tool places 20 Pos. tool diameter 89 mm Tool diameter with free secondary positions 127 mm tool length - max. 250 mm weight of tools 7 kg spindle hours ca. 1.664 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Electronic handwheel - Synchronous thread cutting - Internal coolant supply 20 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition Podpfjyw Tm Eex Ahvjgi and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2008, x-travel 600 mm y-travel 450 mm z-travel 30 mm Control Roeders RFM 600 DS table-size 700 x 550 mm spindle tunring speed 42.000 U/min tool taper HSK 40 number of tool places 20 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Pgedpfx Aeyw Tmxohvji Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1999, total length: 4,850 mm, total width: 1,350 mm, total height: 2,830 mm, Weight: 850 kg - Year: 1999 - Documentation available: No - CE marking present: Yes - CE certificate present: No Podpfxoyfdvlo Ahvogi - Serial number: 905312 - Max. cutting height vertical [mm]: 2150 - Max. cutting width [mm]: 4150 - Max. cutting depth [mm]: 55 - Max. saw blade diameter [mm]: 250 - Vertical cutting: Yes - Voltage [V]: 380 - Current consumption [A]: 6 - Power [kW]: 2.2 - Transport dimensions: 4850mm x 1350mm x 2830mm (l x w x h) - Transport weight [kg]: 850kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Spindle taper BT40, 20Hp spindle motor, Spindle Speed 10000rpm, Pgjdsyw R Hpepfx Ahvsi HAAS Control, 20 Station ATC, coolant.

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: Pgjdpfx Ahewzyp Iovei approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Condition: good (used), Year of construction: 1999, control SINUMERIK 840D Podpfx Aowzmqxshvegi spindle head Ø 640 mm turning length 1000 mm