Used Tube Cutting for sale (16,209)

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, Original machine year: 1996. In 2011, fully overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical components extensively renewed. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + spring-back Tube length: 400 – 1,500 mm Tube outside diameter: 28 mm – 60 mm Material specifications Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Capacity (steel): Ø 60 x 3 mm Isdex Srklepfx Ah Nstb Capacity (stainless steel): Ø 57 x 2 mm Axes/Movements Bending direction: left Bending speed (forward): max. 22.0 rpm (infinitely variable) Bending speed (return): constant 22.0 rpm Rotational positioning: max. 360° Rotational speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic oil volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning device: NTB configuration Control unit: Schwarze-Robitec operation and control console FEATURES - Automatic cold tube bending machine - Tube positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and retraction - Various bending tools for Ø 60 mm tubes - Various accessories - Control cabinet cooling unit - Dual foot switch - Schwarze-Robitec control console - Rittal control cabinet cooling unit, type SK 3361100 Note: Machine could only be tested in setup mode due to lack of operating know-how. No faults are known. The machine is currently disassembled.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Table dimensions: 3000 x 4500 mm MACHINE DETAILS Supply voltage: 400 VAC Rated current at full load: 5.04 A Itodpfx Ahex Trm As Nob Number of supply phases: 3 Power: 2.7 kW Frequency: 50 Hz

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 25,757 h, laser power: 7,000 W, sheet thickness (max.): 30 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel range X-axis: 4,000 mm Ijdpjx S Hmbsfx Ah Njtb Travel range Y-axis: 2,000 mm Travel range Z-axis: 115 mm Table length: 4,000 mm Table width: 2,000 mm Max. sheet thickness (steel): 30 mm Max. sheet thickness (stainless steel): 30 mm Max. sheet thickness (aluminum): 25 mm MACHINE DETAILS Control: Siemens Sinumerik 840D SL Laser source model: TruFlow Laser power: 7,000 W Operating hours Laser on-time: 56,691 h Beam on-time: 25,757 h EQUIPMENT - PierceLine - FocusLine - NitroLine - PlasmaLine - Cutting head with 250 mm lens - Universal quick-change unit (UTI) with system bus - LensLine with condition monitoring - ControlLine: Height control and sheet edge detection - Automatic nozzle changer - High-speed head - Water cutting head (Cooline) - CO laser TruFlow 7000 with optimized standby mode - Maintenance-free turbo radial blowers - High-frequency excitation - Laser control TASC - Laser power regulation - Laser logbook function - CE marking Dismantling and loading can be offered by the seller for an additional charge.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 33,749 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Maximum workpiece weight: 1,700 kg Maximum speed: 140 m/min Controller: CNC Sinumerik 840D SL Positioning accuracy Positioning deviation Pa: 0.1 mm Average positioning accuracy Ps: 0.03 mm Laser data Maximum laser power: 4,000 W Wavelength: 10.6 µm Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 10 mm MACHINE DETAILS Length: 12,000 mm Width: 5,300 mm Height: 2,200 mm Weight: 14,000 kg Total system power consumption: 11–65 kW Beam-on time: 19,152 h (28.08.2025) Laser-on time: 33,749 h (28.08.2025) EQUIPMENT - Automatic longitudinal pallet changer - Longitudinal chip conveyor - Oil vaporizer unit - PierceLine - FocusLine - NitroLine - PlasmaLine - TruFlow 4000 CO2 laser with optimized standby mode - Maintenance-free radial turbine - High-frequency excitation - TASC laser control - Laser power control - Laser logbook Itodpfjx Turbjx Ah Neb - LensLine with status monitoring - Cutting head with 250 mm focal length - Quick-change cutting head unit (UTI) - ControlLine - Lens with RFID chip - ContourLine - Micro-welding - FastLine - AdjustLine - Internet remote services - FlyLine - Simple workshop programming

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 23,000 h, controller model: Siemens Sinumerik 840D SL, laser type: fiber laser, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, The machine was overhauled in 2025! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser type: Fiber laser Laser power: 5,000 W MACHINE DETAILS Control: Siemens Sinumerik 840D SL Year of last overhaul: 2025 Laser beam transmission: Fiber optic Machine chiller unit: Water-air Laser chiller unit: Air-water Operating hours: 23,000 h Itedjx Tuk Dopfx Ah Neb EQUIPMENT CE marking Nozzle changer Chiller unit Emergency stop switch Safety light barrier Dust extraction system Machine frame with integrated control cabinet Automatic longitudinal pallet changer Axis drive with linear motor technology and torque motor Integrated control cabinet lighting Central main switch Longitudinal chip conveyor Working area illumination Laser positioning diode Oil vaporization system PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Transport and positioning device Universal laser cutting head with adaptive lens system Single-head strategy Cutting head protective window Online monitoring of protective window ControlLine Automatic standstill Program-controlled cutting gas pressure regulation FastLine FlyLine AdjustLine Remote maintenance via internet Simple workshop programming Copper processing package Brass processing package Micro welding Multiple sheet processing Condition Guide USB interface RJ-45 network card Central connection Segmented extraction unit Compact dust collector Machine cabin with safety windows Electrically opening roof Commissioning Network configuration via remote maintenance Solid-state laser TruDisk 5001 (5 kW) with fiber output DetectLine Machine layout right-hand side Interface for LiftMaster Compact

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR Iedpfx Aetrd T Toh Netb 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need fior additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W Isdpfehv U S Ejx Ah Nstb Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Catalogue number 7756 TECHNICAL DATA - Max. blade diameter: 400 mm - Blade guard - Blade bore diameter: 30 mm - Max. workpiece diameter with 400 mm blade: 130 mm - Motor approx. 5.5 kW - Feed motor: 1.1 kW - 3 feed speeds + forward/backward - Dimensions (L/W/H): 1500x1300x1300 mm - Weight: 530 kg ADVANTAGES – For palisades – With pointing device – Easy to operate – Occupies little space Itodpfx Aexhcrpsh Njb – Used saw, very good condition Net price: 8,900 PLN Net price: 2,120 EUR depending on exchange rate of 4.2 EUR (Prices subject to change with stronger fluctuations)

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M Itjdpfewg Axvjx Ah Nsb -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Condition: used, Used SRI BV approximately 3sqmt stainless steel vertical shell and tube heat exchanger. Has (27) 15mm inside diameter X 2,400mm long tubes 25 litre capacity rated -1.034/10 bar design pressure at 175 degC. 150mm diameter X 2,400mm long shell 26 litre capacity rated -1.034/10 bar design pressure at 175 degC. Unit has (2) bolted stainless steel heads. Mounted on (2) lugs. Last used as an beer column condenser. Equipped With: Per RD 17/06/25 updated description & raised price. Itsdoyanv Sepfx Ah Nsb

Condition: used, 3-roller bender Brand RAGACHE Iodpfx Ajuluhwoh Notb Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Capacity I Standard steel 120.0 mm

Condition: ready for operation (used), total length: 5,500 mm, total width: 1,400 mm, total height: 1,000 mm, empty load weight: 600 kg, Buisbuigmachine voor buis: dia 6 48 mm voor volledig materiaal: max 30 mm met gereedschap voor buisdiameter 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Itodpfx Asxcqi Esh Neb Max bendingradius: 180°

Condition: ready for operation (used), machine for expanding and reducing tubes 3 heads no tooling included (can be supplied on demand) Isdewrt Tzopfx Ah Netb Dimensions: 1500 x 2000 x 2000 mm Weight: 1600 kg

Condition: ready for operation (used), machine for expanding and reducing tubes 1 head no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Itedpfx Aewrt Tuoh Nob Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

Condition: ready for operation (used), machine for expanding and reducing tubes Iodpfx Ahswrt Tns Netb 2 heads

Condition: used, Plasma Cutting Unit HYPERTHERM Type Max 100 Machine No. 70-2513 Year of manufacture: 1990 Output: 100 Amps = 80% duty cycle Itsdjyah Saopfx Ah Neb 89 Amps = 100% duty cycle Cutting capacity up to 32 mm sheet thickness Stepless adjustment range Torch hose package length: 22 metres Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 63 Amp. plug - Torch hose package with straight torch, without switch, for robotic operation - Separate pushbutton switch to start the plasma cutter Required space (L x W x H): 850 x 700 x 1100 mm Weight: 225 kg Good condition

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Isdsyah R Nopfx Ah Njtb Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: like new (used), Year of construction: 2017, Ficep Gemini G32 Automatic gantry CNC drilling, milling, and thermal cutting systems for large plates Plate size [max. mm]: 3100 x 8000 Itsdpfxjxq Rnds Ah Nob Plate thickness with plasma [max. mm]: 80 Plasma straight torches [max. no.]: 1 Plate thickness with oxy-fuel [max. mm]: 100 Oxy-fuel torches [max. no.]: 2 Drilling heads [no.]: 1 Drilling tools per head [no.]: 8 Drilling diameter [max. mm]: 40 Drilling thickness [max. mm]: 80 Spindle power [kW]: 15 Spindle speed [max. RPM]: 7000 Machine weight [kg]: 4500–4800

Condition: like new (used), Year of construction: 2015, Ficep TIPO B254 Isdpfx Ajxn T H Dsh Njtb Automatic CNC punching & thermal cutting systems for heavy plates Technical specifications Plate size [max. mm]: 2540x6000 Punching nominal force [kN]: 1000 Punching tool [no.]: 8 Punching diameter [max. mm]: 32 Punching thickness [max. mm]: 25 Drilling heads [no.]: 1 Drilling tools per head [no.]: 8 Drilling diameter [max. mm]: 40 Drilling thickness [max. mm]: 100 Spindle power [kW]: 20.1 Spindle speed [max. RPM]: 4000 Plasma torches [max. no.]: 2 Oxy-fuel torches [max. no.]: 1 Machine weight [kg]: 24000

Condition: ready for operation (used), empty load weight: 1,000 kg, cap: 50 x 2 x 2,5 mm Isdpeyac U Nsfx Ah Netb length: 6000 mm

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine with 3 kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included in delivery, as is first-class service. The ultra-affordable entry into laser cutting technology - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Requires only approx. 3.0 x 3.0 meters of installation space - Top quality, book a viewing appointment now! Cutting capacity: - Steel sheet up to 22 mm - Stainless steel sheet up to 12 mm - Aluminum sheet up to 8 mm - Travel range approx. 1300 x 1300 mm - Table size: approx. 1300 x 2500 mm (fits a full medium-format sheet) - German-language machine control - Manual front door - Comprehensive collision protection measures - Large front window for cutting process observation - Automatic, programmable 2-gas switching (compressed air/nitrogen, oxygen) - Extensive cutting parameter database - Incl. nesting module - Very easy to operate - Powerful laser chiller Sales are exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria / Switzerland. Approximate machine dimensions: Width: 3.2 m Itedpjyacw Rsfx Ah Njb Height: 2.3 m Length: 3.3 m Total weight: approx. 3,000 kg Leasing or hire purchase is available through our financial partner. Need a different laser power, table type, or table size? No problem. I am happy to prepare a tailored offer. Not sure which laser power is right for your application? I will of course carry out cutting trials according to your requirements. Anything is possible—from 0.5 kW up to 20 kW laser power.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, table length: 2,070 mm, table width: 1,070 mm, working length: 2,000 mm, working width: 1,000 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 100 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Offered here is a high-precision laser cutting machine with 3000 watts of laser power Type: LG-1020/3kW HaiCut Premium Line - Fully equipped - Innovative 3-gas switching system (pressure and gas type controllable through software) Cutting with N2, O2, or mixed gas (compressed air) - Automatic front door - Machine bed lined with fireclay - Machine bed and axes measured and calibrated with Renishaw interferometer Our goal is to offer the best, most reliable, and cost-effective laser machines currently available on the market. Our machines are ideal for workshops and repair operations. A perfectly developed cutting parameter library is included, as well as first-class on-site support. Brand new machine, delivery time approx. 6–8 weeks We would be pleased to demonstrate the machine at our facility. Traverse path: approx. 1000 x 2000 mm Table surface: approx. 2070 x 1070 mm (accommodates a small format sheet inside the machine) Pull-out cutting table For ultra-precise metal cutting Fully installed and calibrated Cutting software in German Incl. nesting module Very easy to operate Switch on and start working Laser source by Max Photonics (G5/German version) with 3000 watts output Itodpoyacwkefx Ah Neb Extensive electronic and mechanical collision protection for the cutting head Large laser safety window on the front door Automatic front door Safety light curtain for maximum operator protection Cuts stainless steel up to 12 mm Cuts steel up to 22 mm Cuts aluminum up to 12 mm Cuts brass up to 5 mm Heavy-duty industrial quality Complete system / ready to use LED work area lighting 200 mm duct connection for fume extraction Incl. extraction fan Leasing or hire purchase available via our financing partner Need a different power rating or table size? No problem—we have various machines in stock or available at short notice. Sale to commercial customers only. Delivery, consulting, and sales only in Germany, Austria, and Switzerland Machine dimensions (approx.): Width: 2.9 m, Height: 2.1 m, Depth: 3.3 m Weight: approx. 2.5 tons

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 3kW fiber laser Delivery time approx. 8 weeks Our commitment is to offer highly precise, long-term stable, and yet cost-effective laser machines. Our machines are ideal for workshops and repair shops. A thoroughly developed cutting parameter library is included as well as exceptional service. - Includes 2D bevel-cut function for weld seam preparation or production of countersunk holes (see image) - Machine without automatic shuttle table! Loading is carried out from the long side of the machine - Very space-saving - Extremely energy-efficient cutting system - Requires only approx. 4 x 4.5 meters floor space - 3kW laser source by MaxPhotonics (G5/German version) - Laser generator with socket efficiency better than 30% - Suitable for aluminum Isdpfxsyacqwj Ah Njtb - Top quality, schedule a viewing now! Cutting capacity: - Steel up to 22mm (max.) - Stainless steel up to 12mm (max.) - Aluminum up to 10mm (max.) - Brass up to 8mm (max.) - Travel range 1500 x 3000mm (for large formats) - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection for the cutting head - Large laser protection windows for monitoring the cutting process - Comprehensive cutting parameter file - Includes nesting module - Very easy to operate - Powerful laser chiller - German language machine control - German service and spare parts supply - Powerful laser chiller - Optional filter extraction system available (5.5kW with frequency converter for pleasantly quiet operation) Leasing or hire purchase possible through our financing partner Sale exclusively to commercial customers. Delivery / consulting / sales only in Germany / Austria / Switzerland Approx. machine dimensions: Length: 4.0 m Height: 2.3 m Width: 4.5 m Total weight: approx. 4500 kg Need a different laser power, table type or table size? No problem. I'll gladly provide a suitable offer. E.g. 2kW machine from 29,990 EUR Not sure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here.

Condition: used, Year of construction: 2025, Dimensions (L/W/H) 6400x1500x1780 mm Total power requirement 19 kW Weight 1800 kg Itedpfx Aowt Ua Esh Neb Arbeits- und Platzersparnis, sicherer binierbar mit einer Hochgeschwindigkeits-Vierseitenfräse zu einer effizienten, automatischen Produktionslinie.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 4,200 mm, travel distance Y-axis: 1,200 mm, overall weight: 7,200 kg, spindle speed (max.): 15,000 rpm, This IMA BIMA CUT 120/240 was manufactured in 2003. A CNC Wood Machining Centre featuring a processing range of X: 4200 mm, Y: 1200 mm, and a maximum clamping height of 100 mm. It includes a main spindle with a tool holder HSK F63 and a drive power of 7.5 KW. The machine also boasts a tool change magazine with 18 places and a variety of drilling and milling capabilities. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Drive power: 7. 5 kw in s-1 mode • Spindle lubrication: one-time factory grease lubrication • Spindle cooling: water cooling • An automatic tool/adapter change magazine features a disk changer design with 18 place-coded magazine slots and moves with the support in the x-direction. • The adapter units include a saw unit (max. 15,000 rpm, 200 mm blade), a horizontal drilling and milling head with 4 spindles (max. 15,000 rpm), a drilling unit for lock case/rung holes (max. 12,000 rpm), a vertical drilling unit s21 (6,000–9,000 rpm, max. 35 mm drill diameter), and a horizontal drilling-sawing unit (4,500–6,000 rpm, max. 125 mm grooving saw, swivel range 0 or 90 degrees). • Graphical user interface: imawop for pc computer Ijdox U T Hmspfx Ah Netb • Bima cut editor office • Bima cut editor import interface • Control for label printers • Label printer Technical Machine Benefits • Max. Clamping height from upper edge of suction plate z1: 100 mm • Workpiece thickness z2: 14 - 38 mm • Work table height: approx. 1000 mm • Alternating field range without pendulum machining x: 2 x 2000 mm • Free space in the middle x without pendulum processing: 200 mm • With pendulum processing x: 2 x 1500 mm • Free space in the middle x with pendulum processing: 1200 mm • Tool infeed: automatic • Pull-in force: 11000 n • Direction of rotation: programmable, clockwise/anticlockwise Extra Information Machine still under power