Used Truck Crane Dump Truck 4Wd for sale (35,852)

Condition: used, Year of construction: 1996, operating hours: 21,160 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 20333 Specifications: Model year: 1996 Hours: Approximately 21,160 Power: 187 kW Curb weight: 17,770 kg Speed: Up to 50 km/h Length: 968 cm Width: 250 cm Wheelbase: 417 / 165 cm Drivetrain: 6x6 Tires: See attached pictures Extras: Rotor lamp, radio/CD player, air conditioning Fedswi R Evepfx Afnoft Description: Volvo A25C 6x6 dump truck, 1996 model.The machine has run approx. 21,160 hours, and the engine has been recently overhauled. According to the owner, the dumper is in generally good technical condition.Can be delivered quickly if needed. See the attached video for more information. Hours: 21160 Own weight: 17770 Total Weight: 39670 Width: 250 Length: 968 CE: Yes Model: A25C

Condition: used, machine/vehicle number: A25EV1xxxx, Year of construction: 2007, operating hours: 14,560 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 21353 Specifications: 2007 model Delivered certified Hours: approx. 14,560 (may increase) Weight: 21,560 kg Tires (see pictures) 6x6 Rear-view camera Tailgate on the bed Bed (see pictures) Passenger seat Radio/CD Climate control/AC Service history with Volvo Properly repainted Video included Ready for delivery Fodpfxexdrx Ro Afnsft Description:Well-maintained Volvo A25E dumper from 2007.The dumper has service history with Volvo.Delivered certified and ready for delivery. Hours: 14560 Own weight: 21560 CE: Yes Model: A25E Dumper

Condition: used, machine/vehicle number: YV2R0N0G1GA78xxxx, mileage: 235,000 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 20718 Specifications: EU-approved until 26.11.2025 Model year: 2016 Mileage: approx. 200,000 km I-Shift automatic transmission Tires (see photos) 43 t/m Fassi crane Jib Crane recently certified 6 hydraulic extensions Support legs Flatbed length: approx. 650 cm Trailer coupling Rear-view camera Side camera Euro 6 8x4 drive 562 hp Curb weight: 20,080 kg Sleeper cab with bed Radio/CD Air conditioning Ffjdpfx Aexu Axpofnjt Km: 235000 HK: 561 Technical approved: Yes EU-approved until: 27.11.2026 Own weight: 20080 Total Weight: 36000 Payload: 15845 Width: 255 Length: 1080 Euro: 6 Model: FH16 Tridem kranbil m/ 43 t/m Fassi kran Gearbox: Automatic

Condition: used, machine/vehicle number: YB1E4A111HB41xxxx, mileage: 197,000 km, Year of construction: 1987, Please contact ATS Norway for more information Please provide reference number upon request: 20551 Specifications: Model year: 1987 Mileage: approx. 197,000 km Transmission: Manual Crane: HMF 453-K2 Crane reach: approx. 6 meters Air horn Tires (see photos) Dimensions: Length: 713 cm Width: 250 cm Curb weight: 4,720 kg Engine power: 90 hp Description:Volvo FL4 flatbed truck with HMF crane, sold as a repair project. Significant repairs should be expected. The truck was deregistered in 2017 and has been standing still since then. The crane was functional when parked, but has not been tested recently. There is a crack in the chassis.Sold as-is. Ready for delivery. Km: 197000 HK: 90 Technical approved: no EU-approved until: 28.02.2018 Own weight: 4720 Total Weight: 7490 Payload: 2695 Fjdpfx Afewph Eaenjft Width: 250 Length: 713 Model: FL4 Gearbox: Manual

Condition: used, machine/vehicle number: YV2R0P0D5NA88xxxx, mileage: 330,000 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 22080 Specifications: EU-approved until 18.11.2026 Model year: 2021 Mileage: 330,000 km (may increase slightly) Automatic transmission Crawler gear Euro 6 Bergfegen body from 2016, ExTe A9 2.8 m Aluminum rims Length: 1,070 cm Width: 255 cm Wheelbase: 460 cm Curb weight: 15,960 kg Drivetrain: 6x4 Power: 751 hp Ffodpfx Afsx Izq Tenjt LED light bar Sleeper cab Radio/CD Climate control / A/C Crane specifications: Model year: 2019 Epsilon M12 Electric control with mini joysticks Water heater Reach: 8.3 meters Description: 2021 Volvo FH16 750 timber truck.The truck is recently EU-approved and currently in daily operation, so mileage may increase slightly.Equipped with a Bergfegen body from 2016 and an Epsilon M12 crane from 2019.Available for delivery on short notice. Km: 330000 HK: 750 Technical approved: Yes EU-approved until: 18.11.2026 Own weight: 15960 Total Weight: 32000 Payload: 15965 Width: 255 Length: 1070 Euro: 6 Model: FH16 750 6x4 Tømmerbil m/ Epsilon M12 kran Gearbox: Automatic

Condition: used, machine/vehicle number: YV2J4DAC72A54xxxx, mileage: 540,000 km, Year of construction: 2001, Please contact ATS Norway for more information Please provide reference number upon request: 21881 Specifications: EU-approved until 06.06.2026 Mileage: 540,000 km Transmission: Manual Engine brake 6x2 Good tyres Full air suspension Rear support legs Platform length: approx. 6 m Palfinger PK 23002 (2006 model) Remote control Front and rear support legs Euro 3 Side boards included Sleeper bunk Radio/CD Climate control/AC Service done by owner Video available Ready for delivery Description:Volvo FM12 crane truck from 2001, equipped with a 23 t/m Palfinger crane from 2006.The truck is EU-approved and ready for delivery. Service and maintenance have been performed by the owner. Km: 540000 HK: 420 Technical approved: Yes EU-approved until: 06.06.2026 Own weight: 9540 Total Weight: 27000 Payload: 17385 Width: 255 Length: 960 Euro: 3 Model: FM12 6x2 Kranbil m/ 23 t/m Palfinger kran Ffodpfjxy Etaox Afnst Gearbox: Manual

Condition: used, machine/vehicle number: ZCFA75B020248xxxx, mileage: 401,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20395 Specifications: Fsdjwi Ryaopfx Afnoft Km: Approx. 401,000 Transmission: Manual Tires (see pictures) 4x2 Winch Length of plane: Approx. 4.8 m 150 hp Palfinger PK5200 crane from 1991 Crane diagram 3 seats Radio/CD Air conditioning/AC Service is done by owner Ready for delivery Description:Iveco 75E15 crane truck with winch.The truck is EU approved and from 2006.5.2 t/m Palfinger crane from 1991. Km: 401000 HK: 149 Technical approved: Yes EU-approved until: 11.02.2026 Own weight: 5530 Total Weight: 7490 Payload: 1885 Width: 245 Length: 798 Euro: 3 Gearbox: Manual

Condition: used, machine/vehicle number: YS2G8X2000571xxxx, mileage: 24,226 km, Year of construction: 2024, Please contact ATS Norway for more information Please provide reference number upon request: 21494 Car specifications: 2024 model 24,226 km First registered: 06.12.24 560 hp Automatic transmission Euro 6 8x2 2 hydraulic boat supports L ft on 2 and 4 axle Suspension: Full air Onspot Heating in the house Hydraulic extension of 1 meter on level Tool cabinet Air conditioning/ac Radio Light Extra light Ready for delivery   Crane specifications: 2023 HMF crane Certified to: 07/25 50 hours/month 6 Hydraulic extensions on main crane 5 Hydraulic jibs Extra hydraulics all the way forward 4 support legs 20 t front leg 100% Load 360 Remote control Range of 21.4 meters Ready for delivery   Description: Fjdoxlbb Djpfx Afnjft We have a powerful and well-maintained crane truck for sale - a 2024 Scania G560 8x2 pusher crane truck w/ onspot, 2023 50t/m HMF crane w/ extra hydraulics and jib. Both the truck and the crane function as they should, according to the owner. This is a rough skin of a crane truck. The vehicle is well maintained and is fully equipped for demanding missions. The car can be delivered by arrangement. Km: 24226 HK: 560 Technical approved: Yes EU-approved until: 06.12.2026 Own weight: 21300 Euro: 6 Model: G560 Gearbox: Automatic

Condition: used, machine/vehicle number: XLRAE45GF0L41xxxx, mileage: 180,000 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 21713 Specifications: Km: Approx. 180,000 Gearbox: Automatic Good tires On Spot Euro 5, 224 hp Platform length: Approx. 5 meters Width: Approx. 2.3 m 2 sets of wheels with tires Engine brake 4x2 Toolbox Fassi F105 crane Remote control Crane diagram Reach: 12 meters hydraulic Support legs Rotating beacon Services performed at local workshop Video Ready for delivery Description:DAF crane truck from 2012.The truck is EU-approved and ready for delivery.Equipped with a Fassi F105 crane.Only 180,000 km. Ffedexu Aw Eopfx Afnjt Km: 180000 HK: 224 Technical approved: Yes EU-approved until: 25.02.2026 Own weight: 6820 Total Weight: 12000 Payload: 5105 Width: 240 Length: 800 Euro: 5 Model: 2012 DAF Fa 45.220 Kranbil. Gearbox: Automatic

Condition: used, Year of construction: 1985, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22043 Specifications: 1985 model Number of hours unknown Weight: 15,400 kg 6x6 Tires (see photos) Tipping function works Engine and gearbox are in good working order Some lights are defective, according to owner Service and maintenance performed by owner Ready for delivery Description: 1985 Volvo 861 dumper.According to the owner, the dumper is operational, but has some defective lights, etc.Ready for delivery.     Fsdpfx Afsx Hnxzenoft Own weight: 15400 Model: 1985 Volvo 861 6x6 Dumper

Condition: used, machine/vehicle number: 35xxxx, Year of construction: 2024, operating hours: 825 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 20539 Specifications: - 2024 model - 1500 hours - 30700 kg. Fsdpfxowph Ihs Afnjft - 347kW - Volvo co-pilot - Articulated steering - 6x6 - Locking - Good tires - Central lubrication - Weight - Webasto - Air conditioning/ac - Radio - Heated mirrors - Lights - Ready for delivery Description: Vi har en 2024 Volvo A40G Dumper 6x6 for salg. Dumperen har lite timer og fungere som den skal. Den går på serviceavtale hos Volvo. Sist service var 30.10. Dumperen tar seg godt fram i terrenget og er meget effektiv.  Leveringsklar Hours: 825 Own weight: 30700 Kw: 347 CE: Yes Model: A40G

Condition: used, Year of construction: 2004, operating hours: 20,000 h, Chassis type: rigid Please contact ATS Norway for more information Please provide reference number upon request: 21769 Specifications: 2004 model Hours: 15900 Weight: 43500 kg 559 kW Tires (see pictures) Transmission: automatic Total weight: 108,500 kg Central lubrication Retarder 4x4 60 km/h Overhauled gearbox Replaced front left/right brake disc New water pump Overhauled front brake caliper New disc brake Fsdpfx Aexvlg Sofnsft Replaced rear brake pads The rear discs are in good condition. Services provided by owner Light Air conditioning/ac Camera Videos Ready for delivery Description: We have a 2004 Perlini DP705 Tipper Truck for sale. A little has been done to the dump truck and everything works as it should, according to the owner. But there may be errors and omissions as it is from 2004. Has a large load capacity and moves large amounts of m3 in an efficient and reliable manner. Ready for delivery Hours: 20000 Own weight: 43500 Model: DP705 Tipptruck

Condition: used, machine/vehicle number: 34xxxx, Year of construction: 2015, operating hours: 13,436 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 20540 Specifications: - 2015 model - 13436 hours - 63798 km - 30700 kg - 350 kW - Articulated steering - 6x6 - Bar - Tires - Central lubrication - Weight - Webasto - Air conditioning/ac - Radio - Heated mirrors - Chains - Light - Ready for delivery Description: We have a 2015 Volvo A40G dump truck 6x6 for sale. The dump truck has a full service history and functions as it should, according to the owner. Ffedpjwphykjfx Afnjt The dumper handles the terrain well and is very efficient. Appears to be very well cared for and maintained. Ready for delivery Hours: 13436 Own weight: 30700 Kw: 350 CE: Yes

Condition: used, machine/vehicle number: YV2XTY0C3JA83xxxx, mileage: 201,689 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 21480 Car specifications: 2018 model 201,689 km PTO Hours: 1862 I-shift 469 hp Euro 6 6x2 Lift and swing on 3 axles Tires (see pictures) Internal length plan: 6,368 m Internal width plan: 2.491 m Stakes not included Pallet forks not included New towbar (2024) Chassis treatment Services taken in-house at your own workshop Air conditioning/ac Radio Light Ready for delivery   Crane specifications: 2018 model 2620K-RC HMF crane 26 hours/month Certified to: 03/26 6 hydraulic extensions 1 Manual Remote control 17 m range Ready for delivery   Description: We have a 2018 Volvo FM460 6x2 Crane truck w/ 2018 26t/m HMF crane for sale. The car is in daily use and the mileage will increase slightly. Everything works as it should according to the owner. However, errors and defects may occur as the car is from 2018. All services have been carried out at the owner's own workshop. The car has little rust and has been underbody treated. The trailer in the picture can be included if desired for an additional price. Ready for delivery. Ffodpfxoxkt Iyo Afnet Km: 201689 HK: 469 Technical approved: Yes EU-approved until: 31.08.2026 Own weight: 14400 Euro: 6 Model: FM460 6x2 Kranbil m/ 2018 26t/m HMF kran

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib Ffjdpfxewphixo Afnet - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. - Kettle...

Condition: used, mileage: 151,000 km, Year of construction: 2022, Serial number: YV2RT60GXLA85xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21593 Specifications – truck: Mileage: Approx. 151,000 km Transmission: Automatic Full air suspension Engine brake / retarder 8x4 with steering on 4th axle Euro 6, 551 hp 100% front outrigger Flatbed length: approx. 5.8 meters Extension: 50 cm Total length with extension: 6.3 m Boat supports Combo truck – flatbed and fifth wheel included Webasto heater in top cabinet Tow hitch Post rack VBG coupling Remote control for both crane and truck Truck is remote-controlled Includes 2 short sideboards Metalized superstructure Rear support legs Toolboxes Microwave in external cabinet Lightbar (rotating) Camera system License plate box in front Bed Fjdpexp Amcsfx Afnoft Fridge Radio/CD Climate control / AC Full service contract (Gold agreement) Specifications – crane: Fassi F545RA from 2020 Certified until 08.2026 Support legs Remote control Reach: 28.2 meters Jib Winch Load chart 6 + 6 + 1 extensions Description:Volvo FH540 Tridem combo truck from 2022.The vehicle has been under a full (Gold) service contract since new.Sold with flatbed and fifth wheel.

Condition: used, machine/vehicle number: ZN3D070D70904xxxx, mileage: 150,000 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 21965 Specifications: - Eu-approved until 06.05.2026 - Km: Approx. 150,000 (may increase) - Transmission: Automatic - 4x4 - Engine brake - Length plan: 4.26 m - Trailer hitch - Palfinger PK7.501 SLD C crane - Remote control - Crane diagram - Crane reach: 11 meters hydraulic - Approved until 07.26 - Tool cabinet - Euro 6, 180 hp - Good tires - Radio/CD - Air conditioning/AC - Service agreement with Iveco - Delivery by agreement Description: Iveco Crane truck with four-wheel drive. The truck is equipped with a 7.5 t/m Palfinger crane. Both truck and crane are approved. delivery by agreement. Km: 150000 HK: 180 Technical approved: Yes EU-approved until: 06.05.2026 Own weight: 5130 Total Weight: 7000 Payload: 1795 Width: 230 Fedpsx A R Nrofx Afnjft Length: 750 Euro: 6 Model: 70W 4x4 Kranbil m/ Palfinger PK7.501 Gearbox: Automatic

Condition: used, mileage: 196,000 km, Year of construction: 2018, Serial number: YV2XZX0C9JA82xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21687 Truck specifications: Km: 194,000 Gearbox: I-Shift Full air suspension Euro 6, 460 hp 3-step Volvo engine brake Maintained under Volvo service contract Platform length: 6.5 m 2-ton liftgate, Zepro with remote control Tow hitch VBG coupling Lift bogie with steering Toolboxes on both sides Side boards Rotating beacon bar Extra lights Sleeper bunk Good tires Radio/CD Climate control / AC Crane specifications: HMF 2120 from 2017 Crane hours: approx. 1300 Crane diagram Reach: 17.1 meters Max lifting capacity: 3820 kg Remote control Support legs 3rd function on crane / extra hydraulic outlet for tools in the hook Description:Well-maintained Volvo FM450 crane truck from 2018.The truck is equipped with a 21 t/m HMF crane and a 2-ton liftgate.Remote control for both crane and liftgate.Ready for delivery. Km: 196000 HK: 459 Technical approved: Yes Fsdpfx Afexr Tvmoneft EU-approved until: 17.10.2026 Own weight: 14555 Total Weight: 28000 Payload: 13370 Width: 255 Length: 1000 Euro: 6 Model: FM450 Kranbil m/ 21 t/m HMF kran og Løftelem. 194 000 km!

Condition: used, machine/vehicle number: YV2RT60G3JA83xxxx, mileage: 136,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 19582 Truck specifications: - Km: Approx. 136,000 - Transmission: Automatic - Suspension: Steel - Air - 10 ton front axle - Retarder - Euro 6 - Okay tires - Extraction - Length of plane: Approx. 6.5 m - 8x4 - Trailer hitch Fjdjx Izrkspfx Afnjft - VBG - Hydraulic underrun barrier - 551 HP - Turn on 4 - Support legs - Tool cabinet - Bed - Radio/CD - Air conditioning/AC - Silver agreement with Volvo since new (still going on) Crane specifications: - 2018 HMF 5020K - Hour meter PTO: Approx. 3320 - Support legs - Approved until 10.2026 - FJ-1000 Jib - Crane diagram - 6 5 hydraulic extensions - Videos Description: Well-maintained Volvo FH540 Tridem crane truck from 2019. The truck is equipped with a 50 t/m HMF crane with Jib. Only 136,000 km and 3320 PTO hours. It has been under a lease agreement since new and is still going strong. Ready for delivery. Km: 136000 HK: 550 Technical approved: Yes EU-approved until: 12.04.2026 Own weight: 20870 Total Weight: 37000 Year controlled until: 10.25 Payload: 16055 Width: 255 Length: 1046,3 Euro: 6 Model: 2019 Volvo FH540 8x4 Tridem Kranbil m/ 50 t/m HMF kran m/ Jibb. Lite km og krantimer! Gearbox: Automatic

Condition: used, machine/vehicle number: VF611J160GD00xxxx, mileage: 450,000 km, Year of construction: 2016, Please contact ATS Norway for more information Ffsdpjxq Dbqofx Afnot Please provide reference number upon request: 21660 Specifications:• Km: 450,000• Transmission: Automatic• Suspension: Steel front, air rear• Euro 6, 388 hp• Engine brake• Platform length: Approx. 6 meters• 4x2• Tow hitch• Clutch and catalytic converter replaced around July 2024• Palfinger PK 19.001 SLD• Delivered fully certified• Reach: 14.5 meters• Crane hours: 1,150• Crane diagram• Remote control• Support legs• Rotating beacon bar• Tires (see pictures)• Bed• Serviced twice a year• Radio/CD• Climate control / AC• Ready for delivery Description:Renault T380 6x2 crane truck from 2016.Both truck and crane are delivered with new approval.Equipped with a 19 t/m Palfinger crane.Serviced twice a year. Km: 450000 HK: 387 Technical approved: Yes EU-approved until: 11.08.2026 Own weight: 11890 Total Weight: 22000 Payload: 10035 Width: 255 Length: 952 Euro: 6 Model: Renault T380 6x2 Kranbil m/ 19 t/m Palfinger Gearbox: Automatic

Condition: used, mileage: 820,000 km, Year of construction: 2005, Serial number: YS2P6X2000200xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21454 Specifications: EU-approved until 30.07.2026 2005 model Approx. 820,000 km Manual gearbox Tires (see pictures) 20T hooklift Palfinger 23 t/m crane from 1999 Ffsdpfjxg Abnex Afnjt Support legs Length: 900 cm Width: 250 cm Wheelbase: 490 / 134 cm Curb weight: 15,550 kg 6x2 340 hp Rotating warning bar Tow hitch Rearview camera Radio/CD Air conditioning Description:Scania P340 hooklift/crane truck from 2005.Equipped with a Palfinger 23 t/m crane from 1999. The main cylinder has a leak.Flatbed and container can be included at an additional cost.Service history available.Available for prompt delivery. Km: 820000 HK: 340 Technical approved: Yes EU-approved until: 30.07.2026 Own weight: 15550 Total Weight: 29000 Payload: 13375 Width: 250 Length: 900 Euro: 3 Model: P340 Krok/kranbil 23 t/m Palfinger kran Gearbox: Manual

Condition: used, machine/vehicle number: YV2R0P0D4KA84xxxx, mileage: 473,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21385 Specifications: Ffedsxfp R Tepfx Afnet Model year: 2019 Mileage: approx. 473,000 km Full air suspension I-Shift gearbox Tires (see pictures) Retarder Euro 6 Length: 737 cm Width: 255 cm Wheelbase: 340 / 137 cm Curb weight: 13,445 kg 6x4 751 hp Tow hitch Rear-view camera Air horn Auxiliary lights Sleeping compartment Refrigerator Radio/CD Climate control / AC Description:Volvo FH16 tandem tipper truck from 2019.EU approval has recently expired.Ready for quick delivery. Km: 473000 HK: 750 Technical approved: no EU-approved until: 23.09.2025 Own weight: 13370 Total Weight: 35000 Payload: 21555 Width: 255 Length: 737 Euro: 6 Model: 2019 Volvo Fh16 6x4 Tippbil Gearbox: Automatic

Condition: used, machine/vehicle number: YV2R0P0D9GA78xxxx, mileage: 496,000 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 21705 Specifications: EU approved until 02.09.2026 Model year: 2015 Mileage: approx. 496,000 km (will increase slightly) I-Shift gearbox Steel suspension in front, air suspension in rear Tires (see pictures) Ffedpjxt Dfzjfx Afnjt Retarder Euro 6 Length: 735 cm Width: 255 cm Wheelbase: 340/137 cm Curb weight: 14,360 kg 6x4 751 hp Equipped for snow plowing Extra driving lights Tow hitch Bed Radio/CD Climate control / AC Description:Volvo FH16 tandem tipper truck from 2015. The truck is equipped for snow plowing and EU approved until September 2026. Can be delivered at short notice. Km: 496000 HK: 750 Technical approved: Yes EU-approved until: 02.09.2026 Own weight: 14360 Total Weight: 30000 Payload: 15565 Width: 255 Length: 735 Euro: 6 Model: Fh16 6x4 Brøyterigget Tippbil SE VIDEO Gearbox: Automatic

Condition: used, Year of construction: 2017, operating hours: 24,500 h, Serial number: DIN0DA30LH074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21134 Specifications: 2017 model Approx. 6870 hours Approx. 24,500 km Power: 270 kW (375 hp) Tires (see photos) Road registered (white plates) High tailgate Central lubrication Length: 955 cm Width: 299 cm Wheelbase: 411 / 177 cm Curb weight: 24,300 kg Max payload: 27,125 kg 6x6 Reversing camera LED work lights Radio/CD Air conditioning Description: Ffodpfx Afsw Ruyxonot 2017 Doosan DA30 articulated dump truck for sale.Equipped with central lubrication, high tailgate, and reversing camera.Ready for quick delivery. Hours: 24500 Own weight: 24300 Model: 2017 Doosan DA30 Dumper

Condition: used, mileage: 150,000 km, Year of construction: 2019, Serial number: YS2R6X2000553xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18545 Specifications: EU-approved for delivery Model year: 2019 Mileage: Approx. 160,000 km Transmission: Automatic Tires: See pictures Emissions: Euro 6 Flatbed length: Approx. 630 cm Total length: 1,096 cm Width: 255 cm Wheelbase: 475/135 cm Towbar: Yes Fsdpfx Aovg Aivsfnjft Reversing camera: Yes Stabilizing legs: Yes Drive: 6x2 Engine power: 500 hp Bullbar: Yes LED bar: Yes Toolbox: Yes Bed: Yes Radio/CD: Yes Climate/AC: Yes Crane Specifications: Crane: Hiab 477E-7 Hipro from 2019 Certification: Delivered with new certification Outreach: 7+6 Jib: Yes Crane diagram: Yes Remote control: Yes Description: 2019 Scania R500 6x2 crane truck with a Hiab 47 t/m crane and 7+6 outreach, equipped with a jib. Both the truck and crane come with new certification. The flatbed length is 630 cm. Quick delivery available. Km: 150000 HK: 500 Technical approved: Yes EU-approved until: 26.09.2026 Own weight: 20374 Total Weight: 30000 Payload: 9551 Width: 255 Length: 1096 Euro: 6 Model: R500 Gearbox: Automatic