Used Trojan 2000 for sale (9,416)

Condition: used, Year of construction: 2024, Working widths 2000 mm Roller width 2200 mm Number of rollers 2 Stück Iaedotv H T Espfx Ah Nsl Supporting roller - dia 270 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 210 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 11 to Cloth guiding system Breithalter,1 Leitwalze Drive side nach Auftrag Operting side nach Auftrag Liquor trough with displacer + Leitwalze Capacity of dye tub 60 Liter Drive shaft 70 mm dia Hydraulic unit for combined pressure aus Edelstahl Compensator pneum. Entlastung Drive for 60 m/min • 2-Bowl-Finishing padder with one "Swimming Roll" (S-roll), Machine is completely overhauled before delivery, we supply with warranty. (Photo shows a machine in delivered condition). An additional new frequency drive for fitting the machine into a plant is possible.

Condition: used, Year of construction: 1972, turning diameter over bed:980 mm turning diameter over slide rest:600 mm turning length:2200 mm turning diameter in the pit:1200 mm lenght of the pit:450 mm turning speeds:24 speeds:8 - 800 U/min spindle bore:150 mm x-axis:x = 2000, x² = 350 mm y-axis:500 mm thread pitch -number:398 Stück thread pitch:0,5 - 224 mm thread pitch:0,25 - 112 Teil. mod. thread pitch:56 - 1/8 Gang je Zoll thread pitch:112 - 1/4 D.P. feeds::108 feeds - longitudinal:0,032 - 15,2 mm/U feeds - cross:0,016 - 7,6 mm/min quill::MK6 Iedecxxqlspfx Ah Nsal quill stroke:380 mm voltage:380 V frequency:50 Hz total power requirement:25 PS weight of the machine ca.:7,9 t dimensions of the machine ca.:4,4 x 1,8 x 1,7 m

Condition: new, functionality: fully functional, Year of construction: 2024, total length: 2,516 mm, load capacity: 2,500 kg, empty load weight: 400 kg, construction width: 815 mm, Crane arm Iaodjwmtznepfx Ah Nsl ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: New device Technical condition: New Description: 12 months warranty

Condition: used, Year of construction: 1988, functionality: unexamined, machine/vehicle number: 00374030, turning length: 2,000 mm, turning diameter over cross slide: 770 mm, turning diameter: 770 mm, spindle speed (max.): 1,800 rpm, mount diameter: 40 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, total height: 2,125 mm, total length: 5,690 mm, chuck outer diameter: 250 mm, total width: 2,900 mm, overall weight: 8,500 kg, Equipment: rotational speed infinitely variable, The Heyligenstaedt 24 U / 2000 CNC lathe, built in 1988, is in very good and well-maintained condition, but was last used in production in 2023. The machine is equipped with extensive accessories (see photos) and can be inspected at the production site AQUAtec Machining AG Industriepark, 6460 Altdorf, Switzerland, upon request. Iaodswfqvmepfx Ah Nel

Year of construction: 1986, condition: ready for operation (used), machine/vehicle number: 1602097, A used flame cutting machine (3000 x 1800 Corta) from the manufacturer Messer Griesheim. Type: CORTA KS 1500/2000 Machine number: 1602097 Year of construction: 1986 Machine connection: 220 V, 50/60 Hz, 1.0 kVA Iodsd Eg Tlspfx Ah Njal

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 20559 - 09242, pressure: 700 bar, TECHNICAL DETAILS Isdpfx Asvur A Ieh Njal Max. pressure range: up to 700 bar Dosing volume: 4 x 2,000 cm³ Cylinder types: single-acting Number of cylinders: 4 Tank volume: 20.0 l Motor: electric motor, 230 V, 50 Hz, IP55 Power: 2.2 kW MACHINE DETAILS Dimensions (W x D x H): 102 x 84 x 96 cm Weight: 650 kg

Condition: ready for operation (used), Year of construction: 2005, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis MORI SEIKI NL 2000 SY/500 was manufactured in 2005. A horizontal turning machine featuring a BF interface and live tools, it also includes a tool setter on both spindles. If you are looking to get high quality turning and milling capabilities consider the MORI SEIKI NL 2000 SY/500 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Live tools will follow • Tool setter on both spindles Iasdpfx Ahjyaim Eo Nol Extra Information Machine still under power

Condition: ready for operation (used), 6-kolomspers met 4 hydraulische zuigers opwaartse slag diameter van de zuiger: 450 mm slag: 550 mm Maximale kracht van 2000 ton max opening zonder verwarmde tafels: 780 mm max opening met verwarmde tafels: 655 mm Verwarmde tafels met stoom of olie Maximale temperatuur: 300° C Totale oppervlakte: 2000 x 2000 mm Twee tafels van 2000 x 1000 mm (kunnen samen of apart gebruikt worden) 2x 11 kW hydraulisch vermogen met invoerroltafel: 4260 x 1550 x 1250 mm Iaodpfx Ahov Rwfto Nsl Olietank op platform: 2000 x 2000 x 2500 mm Totale hoogte van de pers: 3600 mm De pers zit 920 mm in de grond Werkhoogte is 750 mm Toepassingen: - composietmateriaal - vulkaniseren - buigen / strekken

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2024, total height: 950 mm, total length: 880 mm, total width: 3,075 mm, type of input current: three-phase, Lye application machine Riehle Belma 2000 3 lye curtains Stainless steel construction, mobile with tilting device for bread rolls robust technology Only with us – DGUV V3 tested Connection: 400V, 16A-CEE plug Dimensions: 3075 x 880 x 950 mm (LxWxH) Used machine – cleaned & SAB tested with warranty + spare parts service Iedpfsyaf Eqsx Ah Nsal Option: Service package Maintenance contract Spare parts box Delivery service Instruction & commissioning We have more bakery machines in stock!

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length Iaedpfxow Iq Uge Ah Nel - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, Rotary table 1,250 x 1,400 mm (interference circle 1,700 mm) Heidenhain 530 Diagonal milling head with 1° x 1° indexing Speed up to 5,000 rpm Tool holder SK50 Tool changer with 40 positions Internal coolant supply with 19 bar Chip conveyor in longitudinal direction Ijdjx Iuccspfx Ah Nsal

Condition: used, total width: 660 mm, total length: 2,900 mm, total height: 1,400 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 2500 - Magnet width [mm]: 2050 - Magnet depth [mm]: 200 - Options: Tiltable magnet, Knife Sharpener - Transport dimensions: 2900mm x 665mm x 1400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iodpfox U Duuex Ah Neal Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, overall weight: 9,600 kg, spindle speed (max.): 6,000 rpm, This 3-axis CHIRON Mill 2000 was manufactured in 2006. It features a large travel range with X 2000 mm, Y 500 mm, and Z 550 mm, a spindle speed of 6,000 rpm, and a Siemens control system. The machine includes a 40-station tool magazine, NC swivel head, and a chip conveyor with a high-pressure system. Consider the opportunity to buy this CHIRON Mill 2000 vertical machining centre. Contact us for more information about this machine. Additional equipment • Chip conveyor and coolant system • Chip conveyor with high-pressure system Machine Benefits Technical Machine Benefits • Tool magazine: 40 positions (chain magazine) • Nc swivel head Extra Information Optional Equipment Two new extractors Zero-point clamping system Ijdpfxjyaagpe Ah Noal

Condition: used, Dust suction hood x mm Motor output x kW Air consumption 2000 m³/h +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Isdpfxsx U A N De Ah Neal

Condition: good (used), Year of construction: 2010, Arburg 570 H 2000-400 (2010) Clamping force: 200 t Screw diameter: 35 mm Shot weight: 141 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 154 cm3 Isdpfowpkfcox Ah Noal Screw stroke: 160 mm Injection pressure: 2000 bar Type: Horizontal Drive: Hybrid Equipment: Thermoplastics cylinder cpl. 35 mm high-wear resistance Drive unit w. 11 kW motor and 21.4 l/min capacity SELOGICA 'direct' controller Air blast system 1 with pressure reducer Interface for robot system (EUROMAP 67), 50-pin AED - electrom. dosage drive 9 electr. heating control circuits for mould heating Interface for colouring device 8 free cooling circuits manually adjustable Position-regulated screw

Condition: used, Year of construction: 1996, Plate running direction: from operator to the left Max. edge thickness: 8.0 mm Min. workpiece width: 70 mm Feed speed: 11 m/min Heating-up time: 4.5 min Automatic roll magazine: Yes Cutting shears up to: 0.2 - 3.0 mm Individual edge feed: Yes Automatic gluing: Glue pot with granulate on top Cut-off saw: fixed at 90° Ijdpsxwdp Usfx Ah Neal Flush-milling unit: Yes Combination milling unit: Yes Aggregate display: glue display Control type: manual Operation: selector switch / push buttons Travel device: Yes Protective hood: Yes Working height or infeed table height: 870 mm Approx. weight: 670 kg Dimensions: 3600 x 1400 x 1200 mm Motor power: 11 kW Extraction diameter: 120 mm Storage location: Supplier

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Vertical machining center with 1000 mm in the Y axis, ideal for mold making. Year of manufacture: 2010 Control: Heidenhain iTNC 530 Table dimensions: 2220 x 1000 mm Table load capacity: 3000 kg Travel: x 2020 mm, y 1000 mm, z 800 mm Spindle drive: 25 kW Rapid traverse (x/y/z): 16/16/12 m/min 4 spiral chip conveyors beside the Y axis 4 flat guides in the Y axis Iedpfx Ahexln A Is Njal electronic handwheel Thread cutting without compensation chuck automatic central lubrication Magazine with 40 positions and fast double-arm changer ISO 50 taper automatic shifting gearbox with oil cooler from ZF Glass scales on all axes Through-spindle coolant 20 bar Paper band filter on separate coolant tank, 330 l Machine weight approx. 19,000 kg Machine immediately available due to business closure The machine can still be inspected under power.

Condition: like new (used), Vacuum tumbler SVT2000 Sind Ijdpfowk H Tfjx Ah Nsal Capacity: 2000 liters Speed frequency: 3 to 15 turns Voltage: 380V / 50Hz Electrical Power: 6.6 kW Dimensions: 270 x 154 x 222cm

Condition: ready for operation (used), Year of construction: 1999, operating hours: 77,888 h, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, controller manufacturer: FANUC, controller model: PNC DECO, number of axes: 10, This Tornos Deco 2000-26 Lathe was manufactured in the year 1999 in Switzerland and has 77888 production hours. It is equipped with a TORNOS-BECHLER FANUC PNC DECO control unit and has 10 axis. The machine has a spindle speed of 8000 rpm main spindle and 6000 rpm counter spindle. It comes with a TORNOS ROBOBAR SSF-532 bar loader. Contact us for more information about this lathe. Additional equipment • Bar loader: TORNOS ROBOBAR SSF-532 • Some tool holders included and tool setting device is included in the offer Machine Benefits Technical Machine Benefits • Max. Bar diameter: 16 mm • Travel: 240 mm • C axis indexing precision: 0. 1 ° • Main spindle: 8000 rpm // counter spindle: 6000 rpm Isdpfx Ahjx D Ilgo Neal • Full documentation is available

Condition: used, Year of construction: 2007, 106 369-11 bore diameter 3 - 65 mm number of spindles 1 total power requirement 45 kW . Siemens control Simens Sinumerik . weight 45 t Ijdpfxowizn Ue Ah Njal +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2015, Clamping force: 550 t Screw diameter: 62 mm Distance between tie bars V: 920 mm Distance between tie bars H: 1020 mm Mold thickness : 600-1050 mm Opening stroke max: 901 mm Injection pressure: 2400 var Injection volume: 749 cm3 Shot weight: 718 g Isdpfsxbd R Hox Ah Neal Hot runner controlers: 16 x Hydr. corepullers: 2/3 (fixed/moving platten) Type: Horizontal Drive: Hydraulic Price:

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Iasdpfx Ahowu Acko Nol Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3

Condition: new, The Sinus 330/2000 D is a top-tier Conventional Horizontal Lathe within the Engine Lathes category, renowned for its robust design and superior precision. Built on a solid, one-piece cast bed, this machine ensures remarkable rigidity and stability even under heavy workloads. It features a manual multi-disc clutch for smooth operation and can handle large workpieces, with a turning diameter over the bed of 660 mm and a maximum workpiece length of 2,000 mm. Highlighted by its hardened guideways, the Sinus 330/2000 D operates quietly while providing high cutting power, making it ideal for machining large parts and flanges. Additionally, it includes a removable bed bridge for versatility, automatic lubrication for optimal performance, and a tapered turning device for enhanced functionality. With standard equipment that encompasses a three-axis position indicator, efficient coolant system, and rapid feed capabilities on both Z and X axes, this lathe stands out in both functionality and user safety. You can request a quote to explore how the Sinus 330/2000 D can meet your machining needs within the Engine Lathes product group. Iaodpfxju E Nhgs Ah Nel

Condition: ready for operation (used), X-beweging: 6000 mm Y-beweging: 1500 mm Z-beweging: 2000 mm Iaedpfjx Ti Uqex Ah Nsl - 2 hoofden - open kolom! - elektrisch gereviseerd in 2010 - Heidenhain digitale uitlezing - Leroy Somer elektra voor afvoer van tafel - frequentieregeling op alle assen - tafelafmetingen: 6000 x 1800 mm - voldoet aan de huidige (Franse) gezondheids- en veiligheidsvoorschriften - Belasting op de tafel: 18 ton Machine werd gebruikt in de gereedschapswerkplaats van een autofabrikant. Enkele plano freesmachine Korting op een geldbedrag Fresadoras zijn een soort pilaartjes van een kolom

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, spindle speed (max.): 10,000 rpm, spindle motor power: 17,000 W, number of axes: 3, This 3-axis HELLER MC 2000 was manufactured in 2011 and features a robust three-phase motor spindle, delivering 17 kW at 10,000 rpm with a SK 40 tool holder. It includes a 2-axis servo tool changer, a stationary tool magazine with 54 positions, and a pallet changing device with 2 pallet positions. If you are looking to get high-quality milling capabilities, consider the HELLER MC 2000 machine we have for sale. Contact us for more information about this machine. Additional equipment • Scraper belt conveyor for dry machining • Cold light in the work area • Central cooling unit for motor spindle and control cabinet, CFC-free Machine Benefits Technical Machine Benefits • Central cooling unit for motor spindle and control cabinet, cfc-free • Design according to ce standards • Paint finish: gray-white / anthracite gray / dust gray / heller red • Control cabinet with integrated control, regulation, and power unit • Operating voltage 400v / 50hz, voltage range +/- 10% // control voltage 24v dc • Increased spindle power with power cutting at 240 nm • Axis dynamic power • Full machine enclosure including cover • Automatic central lubrication • Hydraulic system Extra Information Operating instructions include: Operating instructions Control-specific documents Maintenance instructions Spare and wear parts list Supplier instructions Fluid diagrams and electrical diagrams Ijdsx D Nbpjpfx Ah Noal Three-phase motor spindle package with hollow shaft motor, 17 kW at 40% duty cycle, 10000 rpm in asynchronous technology, SK 40 tool holder according to DIN 69 871, Form A, AD and B, for pull studs according to DIN 69872 Form A and B Adjustable, maintenance-free three-phase feed drives Direct position measuring system in the X, Y, Z, and B axes Movement 2-axis servo tool changer Stationary tool magazine with 54 tool positions and fixed position coding Control panel at the workpiece setup station NC rotary table with 360000 x 0.001° pitch Pallet changing device with 2 pallet positions Workpiece Setup station, manually rotatable 4 x 90° The machine has been measured.