Used Transformer 250 Kva for sale (12,463)

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Bdjdsvdk A Espfx Aa Djb Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. Bdsdpfxsy Iczto Aa Dsb The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) Bedpfx Aoy Ia Ttoa Dsdb • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, operating hours: 16,911 h, Vehicle No.: 407-25 HITACHI ZX 250 LCN-3 Year of manufacture: 2008 * 132 kW * Hammer circuit * Quick coupler * Cabin protective grille Bdedpfexw Apmex Aa Djb * Undercarriage approx. 70% Inspection possible at any time during our business hours, test drive by appointment! For export sales, a deposit will be retained and refunded upon receipt of the confirmation of arrival. Company logos or advertising markings on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is provided without guarantee - subject to errors, changes, typographical mistakes and prior sale. Vehicle descriptions explicitly do not constitute guaranteed characteristics. We refer to our General Terms and Conditions, which must be acknowledged.

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm Bdedpfxjv T Nqaj Aa Deb - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 Bedpfsul El Tjx Aa Dsdb x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Twin pallet Technical Specification Taper Size SK 50 Bsdpfx Aajy H D T Uo Dsdb

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 745 mm, travel distance Z-axis: 300 mm, spindle motor power: 18,000 W, spindle speed (max.): 4,500 rpm, total height: 3,200 mm, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840Dsl, number of axes: 2, This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. Additional equipment • Coolant tank capacity: 360 liters Machine Benefits Technical Machine Benefits • High working accuracy, rapid traverse speeds, high maximum speed of driven tools • Machine from single shift operation • Maximum room temperature: up to 30°c • Maximum humidity: 50% • Sound pressure level: 78db(a) Bdjdoytfppspfx Aa Dsb Extra Information Machine still under power Dimensions Machine Depth 3900 mm Technical Specification Through-spindle Coolant Yes

Year of construction: 2006, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator Bdjdjcgan Aepfx Aa Deb -Discount: You get a 20% discount on this item -Soundproofed: 91 dB -Power: 7.0 kVA 50 Hz -Petrol engine: Honda -2x: Schuko 230 Volt -1x: 380 Volt power outlet -1x: Charging cable, 12-volt socket -Dimensions of unit: 590/780/H750 mm -Weight: 136 kg

Condition: used, Year of construction: 2002, Pressure 250 t Bending length 3550 mm Frame width 3000 mm Control Cybelec DNC 1200 Machine weight approx. 18,500 kg Bdjdpfx Ajwn Ebisa Dsb Space requirement approx. 4300x2750x3750 mm Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping top and bottom - Die shifting - Hydraulic crowning - Support arms - Control Cybelec DNC 1200 - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, back gauge tilt - Safety guard

Condition: new, Year of construction: 2026, functionality: fully functional, Pressure 250 t Bending length 3100 mm Frame gap 2600 mm Control Cybelec VisiTouch 24 Stroke 300 mm Throat depth 500 mm Installation height 500 mm Rapid approach (down) 175 mm/s Bdsdpfx Aajylwm Re Djb Bending speed 0-12 mm/s Total power requirement 22 kW Machine weight approx. 13,000 kg Dimensions 3900 x 2150 x 3360 mm Standard equipment: Basic features: - CNC control Cybelec Visitouch 24 - 6+1 axes: Y1-Y2-X-R-Z1-Z2 +V - Automated dynamic hydraulic crowning system: G-CS - Frame deflection compensation system – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display on the ram for visualizing the backgauge positioning - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliance - Upper and lower tool clamping with PROMECAM mechanical system

Condition: used, Year of construction: 1998, Used deduster Bsdpfx Asy Hmzhoa Dsdb Year of manufacture NE 250 W, right-side pneumatic filter regeneration Including suction nozzle d = 250 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW, 400 V / 50 Hz, on/off switch, potential-free contact for machine monitoring and automatic start/stop function, motor protection switch, airflow monitoring / differential pressure indicator, 3 mobile dust bins with inserted chip bags and clamping brackets, robust filter module made of galvanized sheet steel with automatic extinguishing system. Technical data: Maximum airflow: 5,050 – 5,600 m³/h Nominal airflow: 3,532 m³/h Corresponding negative pressure: 2,500 / 2,960 Pa Suction side connection: d = 250 mm Mode of operation: continuous duty Power supply: three-phase current Power consumption: 5.5 kW / 9.8 A Filter area: 25.2 m² Filter cleaning: automatic, pneumatic Total chip collection volume: 480 liters Chip bags (PE): 600 x 600 x 1,100 mm Weight: approx. 1,100 kg Noise level according to EN 23744: 72 dB(A) L x W x H: 3,350 x 1,020 x 2,290 mm Required connections: Compressed air standard coupling NW 7 approx. 6 bar, serviced and cleaned compressed air Extinguishing water connection 1" at 3 bar 1 x 32 A CEE socket Due to varying extraction volumes and differing chip/dust contents, the uniform filling of the bins cannot be guaranteed in every operating situation with this system. Dedusters of this series are suitable for the extraction of wood dust and similar types of dust, whereby an H3 residual dust content of 0.1 mg/m³ is reliably maintained. Availability: by arrangement Location: Frankfurt

Condition: good (used), load capacity: 250 kg, Equipment: foot remote control, Euen welding turntable, 250 kg load capacity, with chuck. Height horizontal: 940 mm. Height tilted to center: 770 mm. Bdodsy Hl Hcepfx Aa Dob

Year of construction: 2022, condition: used, The panel swivel fix facilitates handling when moving panels from a vertical to a horizontal position. The support frame is hydraulically height-adjustable and also pivots. Support rollers facilitate horizontal movement. Four swivel casters ensure safe movement. Technical data: Support height: • Vertical approx. 340-120 mm • Horizontal approx. 1200-890 mm Max. panel size: 5200 x 2100 mm Load capacity: 250 kg Storage location: Bad Wimpfen Bdodpfx Aaov T Ilvj Dob

Condition: used, Year of construction: 2018, operating hours: 1,833 h, * Radio * Driver's suspension seat ----Superstructure: ROPS cab with cabin heating, Yanmar 4-cylinder engine type 4TNV88-PBTB, 2185 cc, 39 hp, travel speed 2.8-5.2 km/h, dozer blade 1840x430mm, track width 400 mm, max digging depth 3,625mm. 4 additional hydraulic outlets, bucket (1350mm), hydraulic quick coupler with swing motor (Powertilt). ----The following accessories are available at extra cost: grading bucket (width 1,350mm) €1,000 net; Korte grapple bucket (500mm) with rotation servo €1,750 net; Atlas Copco demolition hammer, mint condition, type SB 152 Vibro Silenced, €3,900 net. Drainage bucket with teeth (year 2017), width approx. 300mm, capacity: 0.066m³ €750 net. Bdsdpey Iudgsfx Aa Deb Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION PROVIDED WITHOUT WARRANTY, ESPECIALLY REGARDING EQUIPMENT AND ACCESSORIES. The basis of all purchase agreements, invoices, pro forma invoices, orders, and sales talks are our General Terms and Conditions (see legal notice/imprint).

Condition: like new (used), Year of construction: 2013, operating hours: 1,555 h, load capacity: 2,500 kg, fuel type: electric, Manufacturer + model: BT LWE 250 * EX * Pyroban - 3G / Zone 2 ID: 24031.0028 Category: Used Forks: 800 x 540 mm Capacity: 2500 kg Year: 2013 Hours: 1555 hours Battery: Completely NEW * 24v / 260ah (4PzB) * Year 2024 Options: * EX * Atex - Pyroban !!!! System = S6000 E Bdedpfx Aaoy Ir Uco Dob Gas group = IIB Type = 3G (approved for ZONE 2) Temperature class = T3

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, machine/vehicle number: I - 02245, total length: 581 mm, total width: 776 mm, total height: 996 mm, overall weight: 145 kg, input voltage: 230 V, type of input current: DC, cooling capacity: 1.6 kW (2.18 HP), color: original, Flake ice maker with cleaning system, output approx. 250 kg of flake ice in 24 hours. Refrigerant: R 404 A – 1.5 kg. Shipping on pallet, costs borne by the buyer. Bodpfx Aeyybiaoa Dsdb

Condition: used, mileage: 446,000 km, power: 188 kW (255.61 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, * Volvo FE 250 refrigerated box truck * First registration: 05-2015 * Automatic transmission Bdjdpjy Irarofx Aa Dsb * Engine brake * Air conditioning * Carrier 1250 MT * 3 compartments * Palfinger tail lift 2,000 kg * Payload: 11,500 kg * Unladen weight: 6,500 kg * Gross weight: 18,000 kg * More pictures and videos via Whatsapp * Information is subject to change and prior sale reserved.

Condition: used, Year of construction: 2006, Nominal airflow: 4400 m³/h Extraction nozzle: 250 mm Motor power: 5.5 kW Nominal speed: 2880 rpm Weight: 730 kg Location: Nattheim Bdjdoyw Tw Dspfx Aa Dob

Year of construction: 2009, condition: new, functionality: fully functional, machine/vehicle number: 35.554-001, For sale is an original rotor (Rotor 6 RK) for a Gerstenberg Schröder Kombinator / Plastrazor 250S unit. The rotor is a central component of a Scraped Surface Heat Exchanger (SSHE) and is used in the food industry for processing highly viscous products, such as: - Margarine - Shortening - Butter and fat blends Through its rotating scraper blades, the rotor ensures uniform heat transfer and product flow within the cooling cylinder. Manufacturer: Gerstenberg Schröder (SPX Flow) Model / Machine: Kombinator / Plastrazor 250S Design: Rotor 6 RK Item number: 35.554-001 Quantity: 1 piece Year of manufacture / Order date: 03.12.2009 Condition: New and unused (warehouse stock) Originally packed in a sturdy wooden crate Very good condition, no visible damage Technical details: Solid precision component Suitable for continuous industrial operation Presumably stainless / coated steel Estimated weight: approx. 200 – 300 kg Scope of delivery: Rotor as shown Original transport crate Protective packaging included Areas of application: Food industry Fat and margarine production Bjdpfxsy Hbxbe Aa Dodb Processing plants with SSHE technology Key features: Original OEM spare part Ideal as replacement or reserve component Available immediately (no long lead times)

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of manufacture: 1999 injection unit: Screw diameter: 35 mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Bdedpsy Dqa Aefx Aa Djb Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Euromap 12 Robot interface Core pull control injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, ARBURG 420C 800-250 with the sprue picker anvil+long leg Year of manufacture: 1999 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core pull control Bdjdpfxjy Dqcds Aa Djb Injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Bedpfoy Dqiwsx Aa Dedb Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 320K 700-250 with the side robot Arburg Multilift H Year of manufacture: 2005 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : clamping force: 70 t tie bar distance: 320x320 mm size of clamping platens: 476x476 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Air valve x 3 Control with hot runners injection unit hardened - bimetal Central lubrication Dimensions: Weight: 2350 kg length/width/height: 3.37x1.45x1.99 m Bdsdpjy Dp U Sjfx Aa Djb Drive: Pumps/motor: 15 kW Heating power: 6,1 kW Total power: 21,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 Year of manufacture: 2004 Injection unit: Screw diameter: 30 mm Shot weight: 89 g Injection pressure: 2470 bar Dosage volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Bodpfx Aoy Dqbtja Dedb Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request