Used Tft Replacement Monitor for sale (8,293)

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab & Comfort* Cab: TG3 Future Powertrain Platform GX: Maximum size (wide, long, extra-high), comfort suspension, electrically operated glass sunroof, roof spoiler, and side flaps with aerodynamic extensions. * Seats: Premium driver's seat package (air-suspended, seat heating, lumbar support, shoulder adjustment, armrests), Vario co-driver's seat (rotatable, foldable, non-suspended, armrests). * Sleeping Area: Two beds (comfortable mattress 110 mm at the bottom, standard mattress 90 mm at the top), slatted base, storage compartments, reading lights, sockets. * Air Conditioning: Electric auxiliary air conditioning system, Climatronic, water auxiliary heater (4 kW), permanent ventilation with overpressure to prevent dust ingress. * Interior: Dark Moon Grey color scheme with silver and chrome accents, carpet on the engine tunnel, numerous storage compartments, refrigerator, waste bin, sockets (12V, 24V, 230V, USB). ----Safety & Assistance Systems* Driver Assistance: Electronic Stability Program (ESP), Anti-Slip Regulation (ASR), Adaptive Cruise Control (ACC) Stop and Go, Emergency Brake Assist (EBA) Plus, Lane Departure Warning System (LDW), Cornering Assistant, Attention Guard, Traffic Sign Recognition, Reversing Motion System, Distance Warning System, Intelligent Speed Assistant (ISA), Driver Drowsiness Detection, Collision Warning System for Pedestrians and Cyclists. * Brakes: Electronic Braking System (EBS), ABS, Full Brake Assist, High-Performance Engine Brake (CRB), Retarder Eco, disc brakes front and rear, electronic parking brake, EasyStart hill start assist. * Lights & Visibility: LED Package Plus (headlights, fog lights, cornering lights), High Beam Assistant, automatic headlight activation, LED taillights, side marker lights, work lights, digital mirror replacement system MAN OptiView (heated, curb mirror, front mirror). Itodpfxszd Ni Ho Ahbjn ----Drivetrain & Chassis* Engine: MAN D3066 LF11, 12.7 l, 382 kW (520 hp), 2,650 Nm, Euro 6e, Common Rail, various filters and protection functions. * Transmission: MAN TipMatic 14.33 with retarder, various driving programs (Efficiency Plus, Manoeuvre, Idle Speed Driving), heat exchanger, reinforced single-plate clutch. * Axles & Suspension: 4x2, front axle 7,500 kg (leaf suspension, parabolic, 1-leaf, steel), rear axle 13,000 kg (air suspension), rear axle differential lock, stabilizers, shock absorbers, four-link suspension. * Tires & Rims: Continental tires (front axle 385/55R22.5, rear axle 315/70R22.5), Alcoa Dura-Bright EVO rims, tire pressure monitoring system with temperature display. ----Electrical System & On-Board Power Supply* Batteries: 2 x 12V, 210 Ah AGM, maintenance-free, electrical main battery switch, fuse box, comfortable external starting capability. * Generator: 28 V, 180 A, 5,000 W. ----Infotainment & Connectivity* Systems: MAN Media System Professional Navigation (12.3 inches), Advanced sound system with subwoofer, smartphone integration, online traffic information, connectivity board module, integration of MAN apps. * Controls: Multifunction steering wheel (leather, height and tilt adjustable), MAN SmartSelect with touchpad, Professional instrument panel (12.3 inches). ----Superstructure & Interfaces* Saddle Coupling: JOST JSK 42 K0, 2 inches, automatic lubrication, slide bearing, various electrical and pneumatic connections for the semi-trailer. * Tanks: 1100 l diesel (690 l left, 410 l right, aluminum), 165 l AdBlue (left, aluminum with plastic inner coating), lockable tank closures. --

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,970 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for central-axle trailer Fine-grained steel welded construction Front stop, transverse, in a foldable/adjustable design, as previously delivered with AU 257359 1 pair of removable guide rollers, front and rear 1 additional pair of removable guide rollers 4 container locks with sturdy arms based on 20" for swap bodies 7.45 m and 7.82 m 1 pair of front transmission support legs, with straight lower section and single-side operation on the right side 1 pair of rear transmission support legs, with straight lower section and single-side operation on the right side (FR) Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection *Towing equipment for central-axle trailers Towing beam with certified 50 mm tow eye, freight forwarding version Flat flange plate for tractors with underrun-protected LBW, connected to the drawbar at the top and bottom Drawbar clamped/bolted, easily replaceable and partially adjustable in length! Under-coupler drawbar, free drawbar length approx. 2150 mm Folding bracket with spring support on the drawbar, for routing the connection cables to the truck *Axles + Suspension SAF or BPW disc brake axles “Laser-aligned axles/chassis” reduces tire wear and fuel consumption Travel odometer/odometer Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Isdpfx Ahszd U I Ujbjtn Air reservoir: 208 liters Spring-loaded parking brake, Control panel in the front right Duomatic connection at the front, with connecting line to the tractor unit, connection in the front right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection in the front right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability Control System Brake release function via a pushbutton on the vehicle next to the lift & lower valve, for releasing the brake when coupled; EBS power supply must be ensured! “TPMS” Tire Pressure Monitoring System according to ECE R 141, display in the towing vehicle via EBS *Wheels and Tires 385/65 R22.5" steel rims, factory silver *Electrical System 24 volts, multi-chamber LED lights, yellow LED side lights, LED license plate lights, (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) Yellow LED side lights linked to the turn signals “Flashing side lights” Parking sockets for electrical and air connections on the drawbar 2 white LED front position lights 2 white/red LED rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, located on the right rear 2 additional LED work lights, recessed and integrated into the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Prepared for single-line license plate holder Night parking sign at front and rear *Paint Finish Frame Hot-dip galvanized or painted according to customer preference

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Ijdpfx Ahszlbrvobjtn Location: DE-63934 Röllbach

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- Itodsxabt Aopfx Ahbsn CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: excellent (used), Osai Neomark 400 Nd-YAG laser marking machine The NeoMark 400 Performance system was developed for printed circuit board marking. By completely eliminating mechanical movements of the laser, extremely high-resolution markings are possible. The internal conveyor belt is designed to perform width registration for various board types up to a board length of 320 mm. The user interface consists of a console with a separate keyboard to control the laser source, the control systems, the marking systems, and the automation responsible for the board movement via a PC. The NeoCut management software, developed based on NC², the control software of the NEO family, is a simple and intuitive interface for programming the machine and subsequent production monitoring. The Neomark is also equipped with an extraction system that can be connected to an external extractor or a central extraction system to capture the fumes and dust generated during the process. Main features: Manufacturer: Osai Type: Marking laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Voltage: 230 V Rated frequency: 50 Hz ± 2% Maximum electrical absorption: 4 kW Minimum flow rate for pneumatic system: 20 Nl/min Working area: up to 320 x 320 mm Laser safety class: Class 1 (EN 60825-1) Access to the working area: Front door with laser filter Loading and unloading of the printed circuit board PC with LCD monitor and keyboard Ijdexbck Espfx Ahbetn Dimensions: 1200 x 1310 x 1800 mm Weight: approx. 1300 kg Laser completely rebuilt Motor of the beam expander renewed All hoses for cooling replaced More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, This listing is for a 1 of 2 Charles Austin Capex 8C Diaphram Pump. The unit is in full working condition and is ready for immediate release. The Charles Austin Capex 8C is a highly efficient diaphragm pump designed to deliver a clean, oil-free vacuum and pressure source tailored for laboratory benchtop use. With its durable alloy casing and advanced engineering, the Capex 8C sets a new standard in versatile laboratory vacuum and pressure solutions. Features: - Oil-Free Operation: Ensures a clean environment, making it suitable for sensitive applications like microbiology and IVF treatments. - Quiet Running: Designed for low noise levels, ideal for use in laboratories without disrupting ongoing work. - Compliant with IEC 1010: Meets electrical safety standards, ensuring safe operation in laboratory settings. - Versatile Applications: Perfect for vacuum and pressure-assisted filtration, residue analysis, gas monitoring, and evacuating rotary evaporators or desiccators. - Lightweight Design: Easy to transport and reposition, enhancing usability across different workstations in a lab. Key Specifications: - Maximum Flow Rate: 8 L/min - Vacuum Level: 240 mbar (excellent for sensitive applications) - Pressure Capability: 200 kPa Itedpfsxxx U Iex Ahbjn - Motor Type: Shaded pole motor for quiet and efficient operation - Dimensions: 282 mm (W) x 214 mm (D) x 137 mm (H) - Weight: 3.75 kg (lightweight and portable) Multipurpose Applications: - Microbiology Experiments: Ideal for creating a sterile environment during sample handling. - Embalming Procedures: Provides reliable pressure and vacuum for fluid transfer. - IVF Treatment: Ensures a clean, controlled environment for sensitive biological processes. - Waterjet Pump Replacement: A reliable alternative for general laboratory duties. - Aspiration and Filtration: Effective for removing particles and contaminants from samples. - Beauty Therapy: Used for vacuum treatments in cosmetic procedures.

Condition: used, This listing is for a Hanna Instruments HI 9060 Waterproof Thermistor Thermometer The unit is in full working condition and is ready for immediate release. The Hanna HI 9060 is a high-performance thermistor thermometer specifically engineered for use in challenging wet and humid environments. Its robust design and advanced features make it an essential tool for professionals in the food industry and other applications requiring precise temperature monitoring. Key Features: Isdexxz Htspfx Ahbetn Waterproof and Rugged Design: Built to withstand harsh conditions, the HI 9060 is waterproof and can endure the rigors of busy environments, ensuring reliability in various settings. Dual-Level LCD Display: The intuitive dual-level LCD display shows the current temperature alongside the highest and lowest temperature extremes recorded during the session, allowing for quick assessments. Temperature Measurement: Measures temperatures in both degrees Celsius and Fahrenheit, providing flexibility for diverse applications. Interchangeable Probes: Compatible with a range of interchangeable probes (sold separately), enabling users to customize the thermometer for specific tasks or environments. Advanced Memory Functions: Equipped with memory capabilities that store high and low temperature readings, facilitating easy tracking and reporting of temperature variations. Long Battery Life: Enjoy an impressive battery life of up to 3000 hours, minimizing the need for frequent replacements and enhancing operational efficiency. Auto-Off Capability: The thermometer features an auto-off function that conserves battery life by shutting down after a period of inactivity. Low Battery Detection: Alerts users when battery levels are low, ensuring that the thermometer is always ready for use. Ideal Applications: Food Services: Essential for monitoring temperatures in kitchens, ensuring food safety and compliance with health regulations. Food Preparation: Perfect for checking temperatures during cooking and baking processes, helping to maintain quality and safety. Packaging: Ideal for verifying temperature conditions during food packaging, ensuring that products meet safety standards. Storage and Transport of Food: Crucial for monitoring storage temperatures in refrigerators and freezers, as well as during transit, to prevent spoilage. Wet and Humid Environments: Designed to thrive in damp settings, making it suitable for various applications beyond food service, such as laboratories or agricultural environments.

Condition: used, This listing is for a Lion Mark II Formaldemeter. The unit is in full working condition and is ready for immediate release. The Lion Formaldemeter MK11 is a specialized instrument designed for measuring formaldehyde concentrations in various environments. This meter is essential for professionals in fields such as environmental monitoring, industrial hygiene, and health and safety compliance. Here are some key features and considerations regarding its use: Key Features: Service and Calibration: The Lion Formaldemeter MK11 can be serviced and calibrated at any general service facility that is equipped to handle PPM Formaldemeters and Glutaraldemeters. This ensures reliable performance and accurate readings over time. Phenol Filters: The device includes the option to fit phenol filters over the sampling nozzle. These filters are crucial for preventing saturation, thereby ensuring accurate and reliable readings. It is recommended to replace these filters approximately every 10 samples to maintain optimal performance. Itedpfx Asxx Aanehben Cross-Sensitivity: Users should be aware that the Formaldemeter may exhibit cross-sensitivity to other volatile aldehydes and alcohols. This characteristic can potentially affect the accuracy of measurements, so it is important to consider the presence of these substances in the environment being tested. Calibration Warning: For accurate calibration, it is critical to avoid using interference gases. Calibration should always be performed under controlled conditions to ensure the integrity of the measurements. Applications: The Lion Formaldemeter MK11 is ideal for a variety of applications, including: Environmental monitoring in workplaces and laboratories Assessing formaldehyde levels in building materials and indoor air quality Compliance testing for health and safety regulations

Condition: used, Year of construction: 2007, operating hours: 5,245 h, Equipment: ABS, all wheel drive, * Enclosed cab * Air conditioning * Auxiliary heater * HIRSCHMANN control system with TFT monitor * Water-cooled diesel engine, 150 kW * Continuously variable speed control * "Hare" and "Snail" speed settings * Electric parking brake * Overload protection Isdezah Tdepfx Ahbjtn * All-wheel drive * Hydraulic 4-point outrigger system * Central lubrication system * 30-meter arm length * 7.5-meter boom ----Vehicle number 12091 ----Errors and prior sale excepted

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Iedpfxey Dcivo Ahbjtn Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: used, mileage: 20 km, power: 81 kW (110.13 HP), first registration: 06/2024, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,050 mm, total width: 2,032 mm, total height: 1,975 mm, loading space length: 2,647 mm, loading space width: 1,777 mm, loading space height: 1,433 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4183.CHO24.PU66034---- Errors and prior sale excepted! SPECIAL EQUIPMENT * Airbag (passenger side) * Radio: Ford audio system with 13-inch multifunctional display and Ford SYNC 4 including navigation - Digital radio reception DAB/DAB+ - 13-inch TFT multifunctional display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant * Technology Package 5: Exterior mirrors electrically adjustable, heated, and foldable - Blind Spot Information System incl. CTA Rear Cross Traffic Alert - Pre-Collision Assist, camera and radar-based - Driver Drowsiness Warning - Wrong-Way Driving Alert Function - Lane Keeping Assist incl. Lane Keeping Aid and Lane Change Assist - Traffic Sign Recognition System - Park Pilot System front/rear - Adaptive Cruise Control - Intelligent Speed Limiter - Rearview camera - Sensico steering wheel in leather look FURTHER EQUIPMENT * 2-stage unlocking for passenger compartment and cargo area * Airbag, driver side * Anti-lock braking system with electronic brake force distribution * Exterior mirrors electrically adjustable and heated * Battery: H7 AGM single battery * On-board computer with consumption and mileage information (e.g. remaining range) and outside temperature display * Roof console * Double-wing tailgate with 180° opening angle (without window) * ESP - Hill Start Assist - Safety Brake Assist - Traction Control * Front electric windows * Parking brake, electronic * Ford Power Start function (keyless start) * FordPass Connect - incl. live traffic information and WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windshield * Floor mats: rubber floor mats, front * Grab handle, driver and passenger side * Glove compartment with lockable lid * Interior lighting, front with delay switch * Automatic climate control, front - with recirculation heating - with R-1234yf refrigerant * Headrests, front * Fuel tank 55 l * Cargo area lighting (LED) * Steering wheel made of plastic * Center console, small * Emergency call assistant eCall * Radio accessories: 4 loudspeakers * Wheel covers * Tire repair kit * Tire pressure monitoring system * Wheels: steel wheels 6.5 J x 16 * Windscreen wipers with rain sensor * Headlights with LED low beam - incl. high beam assistant * Sliding door, right * Mud flaps, rear * Mud flaps, front * Power steering * Safety belts - seat belt pretensioners and force limiters, front - warning system for unfastened driver's seat belt * Seats: Seat Package 6A - Driver's seat, 2-way manually adjustable - Double passenger seat, without load-through hatch - Passenger seat, fixed - Fabric upholstery Plus Style, seat center section in Black Onyx, rest in Ebony * Start-stop system * Bumpers, front and rear, partially painted in vehicle color * Partition (metal) without window * Door handles made of plastic, black-grey * Door hinges, unlockable from 90 degrees to 168 degrees * Recirculation heating * Tie-down points 6 Itodpfx Asy Aiiyshben * Immobilizer * Heat-reflective glazing, lightly tinted * Central locking with remote control - additionally with second key, with remote control ... and more.----1st hand. German version. Errors and prior sale excepted. 2 years manufacturer's warranty from initial registration (can be extended on request). We will gladly accept your vehicle in part exchange. Financing/leasing also possible without a deposit! Do you have any further questions? W

Condition: used, power: 120 kW (163.15 HP), first registration: 08/2012, fuel type: diesel, color: orange, empty load weight: 5,990 kg, driver cabin: other, gearing type: other, Year of construction: 2012, operating hours: 4,850 h, number of seats: 2, * Compact sweeper CLEANGO, standard configuration for Germany, 50 km/h * Speed 50 km/h * Disc brakes on the front axle with dual brake calipers * Proportional parking brake * Load-dependent valve on the rear axle (required for all 50 km/h machines) Isdpfx Ahjzcfzwobstn * Driver's seat with air suspension * Seat belts * Radio with USB and SD card connection * Heated exterior mirrors * Additional work mirror * Colored rear view monitoring system with TFT monitor * Air conditioning * Tachograph * Cup holder * Independent control of the rotary brush (raise/lower, ground pressure, inclination) * Third front brush Cleango 500 * Weed brush for the 3rd brush * Additional work light (for the 3rd brush) * Suction nozzle with rubber insert * Suction pipe with rubber insert * Preparation for subsequent installation of the hand suction hose * Water return system Cleango 500 * Container door with high and low-level water drain valves (top and bottom) * Water filling hose, Germany * Standard paint RAL 2011 municipal orange * Noise reduction package (only for exhaust fan) * Automatic central lubrication system instead of manual central lubrication * Protection for the rotating beacon * Oil service and maintenance performed at 4,850 operating hours Other: * Trade-in and purchase of vehicles and machines possible. * Selling price excluding transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes and prior sale. * Offer is non-binding. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: used, Year of construction: 2007, functionality: fully functional, Universa 500 Servo with Kallfass Compact Tunnel Year of manufacture: 2007 The machine will be cleaned and overhauled prior to delivery. Installation and training in Western Europe and parts of Eastern Europe are included in the purchase price. The Universa 500 Servo is a film packaging machine with a continuous motion sealing bar. The output is specified as up to 100 cycles per minute, depending on the type of film and product. The sealing bar has a width of 550 mm. The maximum product height is 200 mm. Packaging performance depending on product and film: 100 cycles/min Length of cross sealing bar: 550 mm Max. passage height of sealing bar: 200 mm Min. product length: 80 mm Film: centre-folded film, approx. 12 - 80 µm Film roll holder: arranged at floor level for easy loading Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Conveyor speed: variable 10 - 40 m/min Sealing system: continuously heated sealing bar with replaceable sealing strip, temperature control and monitoring PLC user interface: Touch panel, SIEMENS TP 270 Programmable logic controller: SIMOTION® by SIEMENS® Itedpey Nxvpofx Ahbon Film and product transport via vacuum conveyor to the continuous motion cross sealing unit Replaceable sealing strip; available in different profile shapes for optimal sealing seam quality depending on product and film Position-controlled product flow. No tedious readjustment of timing values required when changing formats or speed Power supply: 400 V three-phase, 50 Hz with protective earth, without cable and plug Rated power: 5 kVA Rated current (at 400 V): 7.3 A Available languages: German, English, French

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain TNC 530, TECHNICAL DETAILS Work Area Table surface: 2,300 x 1,600 mm T-slots: 22 mm Distance between T-slots: 200 mm Workpiece weight with optimal distribution: max. 6,000 kg/m² Distance between columns: 2,700 mm Distance between table surface and spindle center: max. 1,220 mm Travel / Axes Travel X-axis: 2,200 mm Travel Y-axis: 1,500 mm Travel Z-axis: 1,000 mm Feed rate X/Y-axis: 0 - 60 m/min Feed rate Z-axis: 0 - 40 m/min C-axis rotation: ± 370° A-axis rotation: ± 105° A-axis torque: max. 830 N·m C-axis torque: max. 1,200 N·m Iedpfx Ahozhnk Dsbotn Milling Head / Spindle Milling head: TOE 29 T, 5-axis orthogonal milling head Spindle connection: HSK 63 A Spindle power: 29 / 37 kW Spindle torque: 92 / 115 Nm Spindle speed: max. 20,000 rpm Constant torque range: 0 - 3,000 rpm Tool Changer Tool changer: Automatic tool changer Tool holder: HSK 63 A-100 Magazine capacity: 42 stations Tool diameter: max. 80 mm Tool length: max. 350 mm Tool weight: max. 8 kg MACHINE DETAILS Control model: Heidenhain TNC 530 Cooling / Measuring Systems Tool coolant supply through the spindle: 20 bar Coolant flow rate: 25 l/min Measuring system X/Y/Z-axis: Heidenhain glass scales Measuring system C-axis: Heidenhain angle measuring system EQUIPMENT Heidenhain TNC 530 CNC control 5-axis orthogonal milling head TOE 29 T Electro spindle HSK 63 A Automatic tool changer with 42 stations Tool coolant supply through the spindle Laser tool presetting BLUM Heidenhain glass scales on X, Y and Z axes Heidenhain angle measuring system on the C-axis Thermal insulation and stabilization of the crossbeam Central lubrication 2 chip conveyors Portable handwheel Heidenhain HR 520 15" TFT color monitor with soft keys Full enclosure with CE safety standard Control cabinet with air conditioning Rinsing gun Sliding roof for loading and unloading Note: The operating hours can be found in the last picture.

Condition: excellent (used), functionality: fully functional, Chip processing plant for the deoiling of chips of all types (can be customized to your requirements). With this system, coarse and foreign materials are not a problem! The machines are patented and specifically designed so that foreign parts in the chips are automatically ejected. Included in the scope of delivery: - SPYRA chip crusher ZE 2000 - AME hinged belt conveyor (between crusher and centrifuge) - SPYRA chip centrifuge 500H (can be replaced with the larger 600H centrifuge upon request) - Additional discharge conveyor (if required) Not included but available as optional upgrades: Itsdpfxjyzhdys Ahbjn - Tipping and lifting device for fully automatic filling of the chip crusher - Filtration system for extracting oil from the chips for reuse - Control cabinet Technical data for the SPYRA chip crusher ZE 2000: Total height with hopper: approx. 2,318 mm Dimensions (L x W): approx. 1,500 x 800 mm Weight: 2,000 kg Motor power: 22 kW Voltage: 400 V/50 Hz Speed at tear arm: 40 rpm Torque at tear arm: 3,500 Nm Inner diameter of tearing hopper (bottom): 315 mm Inner diameter of tearing hopper (top): 782 mm Height of tearing hopper: 412 mm Hopper capacity (tearing hopper): 85 liters Hydraulic unit Motor power: 0.75 kW Pump output: 2.4 liters/min Hydraulic tank capacity: 5 liters Operating pressure: 10–80 bar Maximum pressure: 160 bar Technical data for SPYRA chip centrifuge PSZ 500 H: Outer diameter: Ø 1,160 mm Drum diameter: Ø 500 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 800 mm Total height (with frame height 1,160 mm): 2,735 mm Motor power: 4 kW Connection: 400 V/50 Hz Drum speed: 1,200 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Tank volume: 100 l Operating pressure (without oil filling): 100 bar Inspection cover bolted. No electrical monitoring. Alternative larger centrifuge PSZ 600 H: Outer diameter: Ø 1,260 mm Drum diameter: Ø 600 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 900 mm Machine height without base: 1,900 mm Discharge height: 835 mm Total height (with frame height 1,160 mm): 2,735 mm Total height is variable by adjusting the frame and hopper height Motor power: 5.5 kW Connection: 400 V/50 Hz Drum speed: 1,000 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Tank volume: 100 l Operating pressure (without oil filling): 100 bar If needed, please contact us for a tipping and lifting device, swiveling discharge conveyor, filtration system, or control cabinet.

Year of construction: 2005, condition: as good as new (ex-display), Iwasaki TR2 2005 web width 100-330mm maximum printing surface - 310 x 254mm printing repeat 50-260mm maximum mechanical speed 50m/min machine power 3p/26kw machine weight approx 12000kg Itjdpfxsy Tlyie Ahbon unwinder 6 Wet UV offset printing units 1 uv flexo unit 1 rotary die cutting slitting rewinding BST Camera inspection monitoring Computer controlled CABER ink system with SIP3 System for remote technical diagnostic Chiller All inking shafts replaced with brand new

Condition: new, Year of construction: 2026, neu 2026 070225 prompt, Zwischenverkauf v Türkei 33700 € 643.67 € 1 30 to 2 mm 400 mm 600 mm 150 mm 1 - 60 mm 140 1/min 4 60 mm 40 mm 200 mm 300 mm 3 kW 1300 mm 1150 mm 2050 mm 1670 kg Welded steel frame construction 4-fold ram guide Iedpfxswirbxo Ahbjtn Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Options: vibrations pads € 132,- bolster plate € 720,-

Condition: excellent (used), Year of construction: 2021, 30-watt CO2 laser Working area: 457 x 30 mm Engraving and cutting of wood, paper, rubber, acrylic, etc. Exhaust system: Atmos Cube PC: HP ProDesk 400G7 Small Form Factor PC Includes monitor, keyboard, and mouse. Ijdpjz Surusfx Ahbjtn Software: RayJetManager pre-installed.

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Fully Refurbished – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005, which is undergoing a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good condition, both technically and aesthetically, and will be prepared for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Fully Refurbished Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Working Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg Itjdpfsz Atdrex Ahbsn ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 is undergoing a comprehensive and professional overhaul in our facility. During the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally refurbished or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire working tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul ## Quality Control and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality control. This includes, in particular, a detailed erosion test according to the quality and testing specifications of OPS INGERSOLL. The relevant machine functions, as well as accuracy and process reliability, will be checked. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit is immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large working area, the machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively refurbished wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability. 10/16.

Condition: good (used), Year of construction: 2008, turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, total height: 6,700 mm, total width: 6,300 mm, total length: 9,300 mm, rotary table diameter: 2,000 mm, spindle speed (max.): 200 rpm, table diameter: 2,000 mm, travel distance X-axis: 1,835 mm, travel distance Y-axis: 1,000 mm, workpiece diameter (max.): 2,400 mm, overall weight: 48,000 kg, Equipment: documentation/manual, X Stroke 1835 mm Z Stroke 1000 mm Table load 20 Ton Ram size 230 x 230 mm   Itodjv R Di Sspfx Ahbon Stroke crossrail 800 mm  Stroke crossrail in 5 steps each 200 mm Live tools 2000 Rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360.000   Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced 2025 new chip conveyor Max. turning Ø: 2400mm Table Ø: 2000mm ATC / revolver: 18 Speeds / ranges: 200Rpm Power: 48kW Maximum turning height:1500mm C-Axis: 360000° Length: 9300mm Width: 6300mm Height: 6700mm Weight: 48000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. Iodpfx Ajudxchehbotn (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2012, axis stroke (X,Y,Z) 5.910,1.815,655 mm Number of spindle head vertical 14 St. Number of spindles head horizontal 4 St. main drive 12 kW tool taper HSK F63 Number of axles 5 St. Number of tools 20 St. working area 5005 x 1450 x 200 mm Number of working hours 3108 h Masterwood Project 455 L, 5-axis CNC machining center Iedpfoz Hz Iwox Ahbotn ----- Machine can be viewed while still in operation! Sold ex-site. Dismantling and reinstallation by experienced Masterwood technicians available as an option! The Masterwood Project 455 L is a highly flexible, numerically controlled 5-axis machining center featuring a robust gantry design. It has been specifically developed for the sophisticated, complete processing (drilling, milling, grooving) of solid wood, panel materials, windows, doors, and stairs. Thanks to its extended "L" configuration, the machine offers an exceptionally large working area for extra-long components. Summary of technical specifications: ----- Travel ranges: X = 5,910 mm, Y = 1,815 mm, Z = 655 mm Max. workpiece dimensions: length 5,005 mm, depth 1,450 mm, height 200 mm Max. axis speed: X = 80 m/min | Y = 80 m/min | Z = 25 m/min Work table system: "TUBELESS" (hose-free) work table with vacuum clamping system Number of table beams: 8 table beams (L-version) Positioning aids: 4 workpiece lifting devices (for heavy components) Stops: 8 rear stops, 8 intermediate stops, 1 side stop on each side (right/left) Vacuum pump Main spindle: ----- Milling spindle (main spindle): 12 kW, 5-axis spindle Spindle cooling system: Liquid circulation cooling (for maximum continuous load) Tool holder: HSK-F63 C-axis (rotation): Indexable by ± 360° Fixed drilling head: ----- Total spindles: 19 independent drilling spindles. • Vertical spindles: 7 in the X-direction, 7 in the Y-direction. • Horizontal spindles: 2 double spindles in the X-direction, 1 double spindle in the Y-direction. • Spindle spacing: 32 mm standard grid. • Integrated grooving saw: Saw unit in the X-direction, saw blade Ø 125 mm (4,000 rpm). Tool changing system ----- Carousel magazine: 16-position tool changer Additional positions: Linear tool changer with 4 positions on the machine bed for large-format tools (e.g., profile cutters or saw blades up to Ø 350 mm). Control System & Software ----- Hardware: High-performance PC-based control system with a Windows interface and a 17" color TFT monitor. Network: Integrated Ethernet card for easy online connectivity. Software Package: • MasterWork: Graphical programming system (CAD/CAM interface, DXF import, macros). • Master AT: Graphical setup aid for the optimal positioning of vacuum pods and support beams. Remote Maintenance: Equipped for "Teleservice On-Line" for direct online troubleshooting. Accessories: ----- Various vacuum clamping devices 4 solid wood clamps Veneer stops Selected tools as shown (available upon request) ----- Price for the above-mentioned machine available upon request! ----- Further Information:...

Condition: used, total length: 4,750 mm, total width: 2,640 mm, total height: 2,030 mm, Colour: White Empty weight: 3.500 kg The Bauerrichter ESR-1 is a polisher designed for creating high-gloss surfaces on various materials. Below is a summary of its technical specifications: Technical Specifications: CharacteristicSpecificationElectric connection380 V, 20 kDimensions (L x W x H)5,600 mm x 2,400 mm x 2,100 mmWeightAbout 3,000 kgWork table dimensions1,350 mm x 3,200 mmMaximum workpiece height< 100 mmDiameter polishing rollerØ 400 mmFeed rateFrequency controlled Characteristics: Polishing unit:Moves over a fixed work table and is equipped with an inclined, oscillating polishing roller. The height and oscillation speed are infinitely adjustable. Polishing roller: Equipped with special 400 mm diameter polishing rings that ensure longer life and lower operating costs. Quick-change system: Allows easy and quick replacement of polishing rings, reducing set-up time. Workpiece attachment: Standard equipped with a quick clamping system; optional vacuum clamping system is available for faster and more comfortable operation. Construction: Robust welded precision work table with phenolic resin bonded film plates, resistant to heat, moisture and chemicals. Drive: High quality SEW electric motors with energy efficiency class EFF1 (IE2), known for their robustness and durability. Itjdpfxewnhxds Ahbjn This machine offers an efficient solution for polishing various materials and is designed with durability and ease of use in mind. - CE marking present: Yes - Serial number: 150610 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 1 - - Brush length [mm]: 1500 - - Brush diameter [mm]: 180 - - Motor power [kW]: 11 - └ Unit 2: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 7 - - Brush length [mm]: 75 - - Brush diameter [mm]: 180 - Max. working width [mm]: 1440 - Max. passage height [mm]: 250 - Infeed table length [mm]: 5150 - Outfeed table length [mm]: 5150 - Voltage [V]: 400 - Transport dimensions: 4750mm x 2640mm x 2030mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Manufacturer: REHM Model: Synergic. PRO 2 350-4 Isdpfx Ahoz Sk Hvobotn Machine condition: Very good used condition ///// Price listed is for 1 unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Weight: approx. 130kg SMC Technology – Smart Machine Control A unique step-regulated control concept developed by Rehm: The arc length is regulated not only by measuring voltage and welding current, but also by the digital determination of wire feed speed. This enables excellent welding results while keeping operation easy and safe. - SDI – Stepless Dynamic Induction The continuously adjustable coil automatically ensures exceptional arc ignition properties and high arc stability during welding. Fine-tuning can be performed manually using the SDI knob. This allows adjustment of heat input, which can positively influence the amount of post-weld work required. - RSC – Realtime Speer Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. With the use of RSC, changes in arc length are compensated for more quickly and efficiently. - CCM – Characteristic Curie Memory Built-in database of expert welding parameters. By selecting the wire type, diameter, and desired welding voltage, the system synergistically sets the optimal preset welding parameters. During operation, actual parameter values are constantly compared to the preset values, and automatically adjusted as needed. - RMI – Rehm Machine Interface The machine’s control panel is extremely user-friendly and ensures error-free selection. Simple parameter selection makes the operator’s job easier, helping to minimize mistakes and reduce setup time.

Condition: used, Professional BK Medical BK Ultrasound bk5000 ultrasound machine, designed for diagnostic imaging. The device powers on correctly – the screen and control panel are functional. The machine is mounted on a mobile stand equipped with wheels, probe holders, and an adjustable monitor. Device specifications: Manufacturer: BK Medical / BK Ultrasound Model: bk5000 Type / REF: 2300 Version: BK5000-11 Serial number: 5008020 Year of manufacture: 2016 Country of manufacture: Denmark CE marking: 0543 Itedpfx Ajz Spcrehbjn Color monitor Full keyboard and control panel Mobile design on wheels Included: BK Medical bk5000 ultrasound machine, Mobile stand, Monitor, Control panel, 2 ultrasound probes as shown in the pictures, Cables, Documentation and operating instructions. The device is used, functional, and shows normal signs of use, with some dirt and minor scratches. There are localized marks from a marker on the housing. The exact visual condition and included accessories are shown in the pictures. The screen displays the message “Factory Mode Active / Not for Diagnostic Use” – the device is currently operating in factory mode and may require appropriate configuration or activation by an authorized service center before medical use. The sale includes only the items shown in the pictures.