Used Tb Sprint 303 for sale (8,395)

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 10900 € 209.28 € 60 mm 595 mm 363 mm 900 mm 130 kg 10.5 cm³ 60 x 3 mm 2"Gas x 3,91 mm 60 x 4 mm 60 x 2 mm 60 x 4 mm 60 x 4 mm 64 x 4 mm 64 x 4 mm 60 x 4 mm 50 x 4 mm 35 mm 60x30x4 stehend, 60x40x5 mm 300 mm 10 mm 10 mm 1,25 / 2,50 U/min 1.5 kW digital read out for bending angle manual clamping material spring back compensation Iedpewirxkjfx Ah Njal digital read out and zero setting for clamping point 2 speeds overload protection mobile by rolls and handle tools not included

Condition: refurbished (used), The angled conveyor from MTF is available for sale. Feed length: 1300 mm Elevating belt: 1300 mm Maximum drop height: 1200 mm Usable width: 240 mm Total width: 520 mm Iaodoxmut Nopfx Ah Nol New motor protection New conveyor belt with corrugated edge Corrugated edge: 300 mm Cleat height: 30 mm Belt speed: 4.2 m/min Mobile, with new running rollers

Condition: used, Year of construction: 2015, operating hours: 8,200 h, Takeuchi TB 216 Year of manufacture 2015 8200 operating hours Martin Powertilt Iajdpfx Ahsxl Uz Ds Nol 3 buckets Additional hydraulics on the arm Delivery possible

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Iaodpfx Ahowym Nfs Njl Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: reconditioned (used), functionality: fully functional, power: 42.4 kW (57.65 HP), fuel type: diesel, overall weight: 7,065 kg, Year of construction: 2020, operating hours: 2,135 h, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, programmable additional control circuit with proport. control + AB, programmable additional circuit with proport. control, additional circuit for hydr. quick coupler, programmable additional circuit with proport. Control (electric power tilt changeover) Auxiliary hydraulics installed up to the dipper arm with high pressure shut-off valves, automatic speed reduction system, electric refueling pump, Load holding valve on the lift, stick and adjustment cylinders, overload warning device + pipe breakage protection, ROPS comfort cab, radio, automatic air conditioning, air-sprung driver's seat, key system for all locking functions, Iaedpfst I Tp Sex Ah Nsl Load sensing hydraulic system, automatic hydraulic track tensioning, 400 mm rubber tracks, Adjustable boom: hydr. SW Lehnhoff HS 08 incl. attachment kit, original Powertilt 174° slewing with load hook, electr. grapple changeover

Condition: good (used), Year of construction: 1996, CMZ TB 480 Year of manufacture 1996 Very good running condition Iaodpfx Ahoxlydds Nel Videos available

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 39500 € 754.45 € 127 mm 850 mm 1200 mm 850 mm 720 kg 80 cm³ 127 x 7,1 mm 4" x 8,56 mm 127 x 7,1 mm 114,3 x 5,6 mm 114,3 x 5,6 mm 139,7 x 8,8 mm 139,7 x 8,8 mm 64 x 6 mm 88,9 x 3,65 mm 50 x 4 mm 90 mm 130 x 25 stehend, 130 x 6 mm 700 mm Iedpfx Aswirvioh Noal 36 mm 10 mm 0 - 0,75 U/min 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul Tools on request

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, spindle bore: 20 mm, CNC Fanuc 32i MACHINE CONCEPT Number of linear axes + C axes + B axes: mm 5 + 1 + 0 Number of spindles: 2 Number of channels: 2 MAIN SPINDLE Maximum bar passage: mm 20 Number of revolutions: rpm 10,000 Power (S2 30 min/S1): kW 3.7 / 2.2 Torque (S2 30 min/S1): Nm 23.6 / 14 COUNTER SPINDLE Maximum bar passage: mm 20 Number of revolutions: rpm 10,000 Power (S2 30 min/S1): kW 2.2 / 1.5 Torque (S2 30 min/S1): Nm 7.0 / 4.8 WORK AREA Z1 stroke: mm 60 Tool holders 1 stroke X1 / Y1: mm 50 / 325 Iodpfxswifrks Ah Neal Counter spindle stroke X2 / Z2: mm 220 / 170 Rapid speed on linear axes X1, Z1, X2, Z2/Y1, Y2: m/min 32/32 Acceleration of linear axes: m/s2 5 TOOL HOLDERS ON SLIDE 1 Fixed turning tools: 6 Tools for frontal and secondary machining: 6/3 Driven tools: 2 + 2 Maximum number of revolutions: rpm 6,000 Power (S3 40% / S1): kW 1.3 / 0.8 Torque (S3 40% / S1): Nm 2 / 1.3 Power (S3 40% / S1): kW 1.3 / 0.8 Torque (S3 40% / S1): Nm 3.5 / 3 TOOL HOLDER ON SLIDE Y2 Fixed/motorized tools for secondary machining: 4/0 Maximum number of revolutions: rpm 6,000 Power (S3 40% / S1): kW 1.2 / 1 Torque (S3 40% / S1): Nm 2.5 / 2

Condition: excellent (used), Year of construction: 2017, operating hours: 20,000 h, functionality: fully functional, spindle speed (max.): 6,500 rpm, bar passage: 42 mm, bar diameter (max.): 42 mm, Production lathe Gildemeister Sprint 42 - 8 linear axes with high-pressure system and Iemca bar feeder Year of manufacture: 2017 Control: Fanuc 31i Operating hours: ~20,000h Version with 8 axes – linear drive on X1 axis Main and counter spindle speed: 6,500 rpm Max. bar capacity: 42mm Coolant system: Slide 1: 8 bar Slide 2 + Y: 20 bar Bar feeder: Iemca BOSS 552/32 Parts conveyor belt Iodpfxsxbpp Uj Ah Njal

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis Iasdpexa Epbefx Ah Njl - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: reconditioned (used), functionality: fully functional, power: 42.4 kW (57.65 HP), fuel type: diesel, overall weight: 7,065 kg, Year of construction: 2020, operating hours: 2,435 h, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, programmable additional control circuit with proport. control + AB, programmable additional circuit with proport. control, additional circuit for hydr. quick coupler, programmable additional circuit with proport. Control (electric power tilt changeover) Auxiliary hydraulics installed up to the dipper arm with high pressure shut-off valves, automatic speed reduction system, electric refueling pump, Isdpfx Aet I Tn Ush Njal Load holding valve on the lift, stick and adjustment cylinders, overload warning device + pipe breakage protection, ROPS comfort cab, radio, automatic air conditioning, air-sprung driver's seat, key system for all locking functions, Load sensing hydraulic system, automatic hydraulic track tensioning, 400 mm rubber tracks, Adjustable boom: hydr. SW Lehnhoff HS 08 incl. attachment kit, original Powertilt 174° slewing with load hook, electr. grapple changeover

Condition: new, sheet width 1270 mm plate thickness 2.0 mm daylight opening 48.0 mm daylight opening 150 mm ohne Segmente bending angle max. 0 - 135 ° work height max. 900 mm weight of the machine ca. 465 kg dimensions of the machine ca. 1620 x 1070 x 1280 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for the production of high folded profiles Scope of delivery : - Segmented upper, lower and bending beam - manual backgauge Iaedpfx Ahsxabqus Nol - Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 250 | 270mm

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 29100 € 555.81 € 100 mm 500 mm 1200 mm 850 mm 480 kg Iasdpfx Ahowirvco Njl 43 cm³ 100 x 6 mm 3" 1/2 x 4 mm 100 x 6 mm 100 x 3,6 mm 100 x 3,6 mm 114,3 x 6,3 mm 114,3 x 6,3 mm 114,4 x 6,3 mm 88,9 x 3,65 mm 100 x 5 mm 70 mm 100 x 25 stehend, 100 x 5 mm 400 mm 36 mm 10 mm 0 - 1,3 U/min 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul tools not included, prices on request

Year of construction: 1991, condition: used, machine/vehicle number: 149125/95, max. operating pressure: 8 bar Delivery rate: 2.51 m³/min Drive motor: 380/660 V, 15 kW Space requirement: 820 x 950 x 1200 mm high Weight: 360 kg Air vessel, make KAESER, year of construction 1999 Capacity: 1000 l Iasdpsby Hpbsfx Ah Njl max. operating pressure: 11 bar Space requirement: 800 Ø x 2300 mm high

Condition: used, functionality: fully functional, Edge thickness 0.4 – 3 mm SPS screen control Fully automatic edge magazine Fully automatic roll magazine – cross-cut shears Cartridge + PU gluing station + automatic dosing nozzle Workpiece height 6 – 45 mm End trimming unit swivels at 0 and 10 degrees Flush, bevel, and radius milling, swivels up to 15 degrees Profile scraper Buffing unit Soundproof cabin CE version Machine is FUNCTION-TESTED and in GOOD CONDITION ex works Iaedjw Igg Sspfx Ah Njl

Condition: good (used), electric motor, drive motor, engine -Manufacturer: Einhell, electric motor from column drill TB 13/5 EK -Power: 0.25 kW / 1420 rpm Ijdpfx Ajw S Tg Teh Nsal -Shaft: Ø 14 x 30 mm -Number: 6x motor available -Price: per piece -Dimensions: 185/123/165 mm -Weight: 4.6 kg/piece

Condition: new, Year of construction: 2025, Standard equipment: robust, high-quality and inclined rotation hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop continuous speed control connection cable with SCHUCO plug (1.2 m) undervoltage release drill protection with electric. Protection thermal overload protection Iaedpfxoihipzo Ah Nel emergency stop button Weight in kg: 44 motor kW: 0.45 alternating current 230 V speed 1/min: 250-3000 drilling capacity mm: - steel Ø 12 mm - aluminum Ø 20 mm - soft wood Ø 40 mm - drilling depth 60 mm - projection 220 mm - column diameter 70 mm - usable table surface (W x L) 300 x 250 mm - T-slot size number 2, distance 100 mm dimensions width 14/26 mm - spindle B 16 - digital speed display - drilling depth display: scale - drilling depth stop: quickly adjustable stop ring - feed: by hand - FACTORY WARRANTY: 3 years - free delivery incl. Packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, sheet width 1020 mm plate thickness 2.5 mm daylight opening 48.0 mm daylight opening 150 mm ohne Segmente bending angle max. 0 - 135 ° work height max. 900 mm weight of the machine ca. 340 kg dimensions of the machine ca. 1350 x 820 x 1300 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for the production of high folded profiles Scope of delivery : - Segmented upper, lower and bending beam - manual backgauge Ijdpfjxaa E Dex Ah Njal - Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 |200 | 270 mm

Condition: new, neu ca. 8 Wochen ab Auftragse Italien Iedpfjwiru Sox Ah Nsal 12460 € 239.23 € 60 mm 500 mm 760 mm 1000 mm 186 kg 10 cm³ 60 x 4 mm 2" x 3,91 mm 60 x 4 mm 60 x 2 mm 60 x 3 mm 60 x 6 mm 64 x 6 mm 64 x 6 mm 63 x 4 mm 50 x 4 mm 35 mm 35 x 35 mm 60 x 20 stehend, 60 x 35 mm 380 mm 10 mm 10 mm 1,5 / 3 U/min 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual tools not included, priced on request

Condition: ready for operation (used), machine/vehicle number: 153556, drilling capacity: in St 60 6 mm spindle taper: B 12 MK throat: 165 mm table size: 290 x 300 mm spindle turning speed range: 400 - 4000 rpm Iedpfxjfnbgle Ah Noal engine: 380 V, 0,34 kW space needed: 450 x 300 x 680 mm weight: ca. 50 kg

Condition: excellent (used), Year of construction: 2008, input voltage: 400 V, Gas dryer for textiles after screen printing, M&R Sprint 2000. The dryer is in very good condition. Conveyor length: 7 m. Continuous adjustment of temperature and belt speed. Iaodpfxoxfkyis Ah Nsl

Year of construction: 2001, condition: used, Sottoriva Sprint 30 Iaedpfx Aodqapbsh Nol serial: B31656 2001, 30L spiral mixer, variable speed, stainless bowl and contact parts, safety guard, with timer

Condition: new, Year of construction: 2025, Spindle speed continuously electronically 40-4000 1/min Spindle mount MK 2 Table height adjustment with rack Thread cutting capacity max M10 Setting the thread cutting depth via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 13 mm / 15 mm Drilling depth 60 mm Throw 225 mm Column diameter 60 mm Usable table surface (W x L) 330x250 mm Machine dimensions (W x D x H) 420x450x860 mm Machine dimensions (with VP) (W x D x H) 452x700x1130 mm Weight 62 kg Max. distance Spindle/table/base 300/ 360 mm AC motor with frequency converter 230 V, 0.54 kW OPTION: Drilling package no. 2 Ijdjby Swhopfx Ah Nsal - Vice felix, jaw width 80, clamping range max. 120 mm - Keyless drill chuck 1-13 mm mount B16 - Taper mandrel MK II/B16 - Reducing sleeve MK II/MK I Price: € 320.00 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, sheet width 1020 mm plate thickness 2,5 mm daylight opening 48 mm bending angle max. 0 - 135 ° total power requirement von Hand kW weight of the machine ca. 285 kg dimensions of the machine ca. 1,35 x 0,82 x 1,14 m Furnishing: - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options Iaedpfx Ahoxaaxke Nol - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles scope of delivery - Segmented upper cheek - manual backgauge - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 270 mm

Condition: new, sheet width 2020 mm plate thickness 2,0 mm daylight opening 122 mit Segmente mm bending angle max. 0 - 135 ° work height max. 930 mm total power requirement von Hand kW weight of the machine ca. 1020 kg dimensions of the machine ca. 2,75 x 0,56 x 1,26 m characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces Iajdjxaamhspfx Ah Nol - Robust construction in a modern design scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm