Used Studer S30 for sale (10)

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Nodpfx Aow T Sd Tof Ejwn Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: refurbished (used), Year of construction: 2025, Studer S30 Center height: 125 mm center width: 650 mm Workpiece weight: 80 kg Other freely selectable options: - Completely new control cabinet with SPS-Basic and panel - Conversion to ball screw incl. SPS-Pro (cycle controlled) - "Workpiece memory"-SPS-PRO for 10/15/30/50 workpieces - Glass scale in X- and Z-axis - Swiveling internal grinding device Nodpjd Hdxwjfx Af Ejwn - Motor spindle for internal grinding device - Frequency converter external grinding spindle - Frequency converter for internal grinding spindle - Grinding sensor system - Contact protection on external grinding spindle - Safety door - manually operated - Grinding wheel flange - LED spot with flex arm - suitable coolant system

Condition: used, Year of construction: 1988, Swivel-in internal grinding attachment for STUDER RHU and S 30 universal cylindrical grinding machines with oil mist lubrication up to 50,000 rpm. Nwedpfx Afjcdi N Is Eon Excellent condition!

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Nwodsvca Izopfx Af Esn Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 1987, grinding diameter 350 mm grinding length 650 mm centre height 175 mm Nwsdpfjmmmtfex Af Esn Despite being in excellent condition, it was dismantled down to the base, cleaned, sealing and wear parts replaced, upper table reground and geometry restored to new machine tolerance. - 7072 operating hours - Retrofitted in 2013 with a cooling lubricant belt filter system, capacity 300 L, manufacturer Knoll. - Including machine accessories, e.g. holders, flanges, collet chuck set, etc. - paper cooling unit from 2014 like new because nearly unused

Condition: used, Rondslijper centre height 125 mm centre width 650 mm grinding diameter 250 mm grinding wheel diameter 400 mm total power requirement 8 kw weight approx. 2500 kg Dit is een machine van Machines4you Nwedegfqn Nspfx Af Ejn

Condition: used, Year of construction: 1988, grinding length: 1,000 mm, grinding diameter: 350 mm, The machine was still in use until recently. Grinding diameter: 350mm Grinding length: 1000mm Nwodpfswca H Aox Af Eon Year of manufacture: 1988 Remarks: - The price does NOT include any accessories! - Pickup by buyer, from the site. - Pickup date will be agreed upon by the seller. - No warranty. - Advance payment (invoice) or cash upon pickup.

Condition: used, CNC cylindrical grinding machine STUDER S31 CNC LeanPro with "Pictogramming" Nodpfx Afswim U Hj Eown Distance between centers: 1000mm Center heigh 175mm Grinding Wheel head rotation (B) 360° (1°) 2 ext Grinding Wheels 1 int Grinding Wheel Ext Grinding wheel 400 mm x 40 mm x 127 mm overhauled spindle > see photos Workhead CM 4 0-1000 RPM CNC Fanuc Programming: Pictogramming Heidenhain linear encoders This machine can be inspected under power in our warehouse in Gussago BS Italy

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 1404, total width: 1,690 mm, total length: 3,410 mm, total height: 1,915 mm, overall weight: 3,000 kg, TECHNICAL DATA Capacity - Height of centres: 125/175mm - Distance between centers: 400mm; 700mm; 1025mm - Max.travel of longitudinal slide: 400mm; 700mm; 1025mm Nwedpfxsupiycs Af Ejn Table - Table speed steplessly adjustable: 0.5 - 5.5 m/min. - Reversal dwell of table: 0-6 sec. - Minimum automatic stroke approx.: 1.5mm - Maximum swivel of table: 400 deg.- 12 ; 700 deg. -10; 1025 deg.- 8 - Travel per revolution of handwheel: 25mm Workhead - Swivel towards grinding wheel: 90 deg. - Spindle speed, steplessly variable: 30 - 675 RPM - Spindle nose taper: Morse 5 - Collet shank diameter: 25mm - Diameter of 3-jaw chuck: 160mm Wheelhead - Grinding wheel L.H. or R.H.: - Diameter (special exec. 6.25kW/8.4 HP): 400 (450) mm - Maximum width: 50 (80) mm - Bore: 127 (203) mm - Spindle speeds (3-step Vee-belt pulley) - Grinding wheel dia 400: 1500/1625/1800/2000/2200/2400 RPM - Grinding wheel dia 450 (8.4HP): 1340/1500/1625/1800/2000/2200 RPM - Grinding wheel motor approx.: 3kW - Grinding wheel motor, special for 450 dia wheel approx.: 6.25kW - Rapid travel of wheelhead: - Hydr.approach and retraction: 40 mm - Additional adjustment with hand leveler: 210 mm - Swivel of the whole cross slide L.H. and R.H.: 45 deg. - Interminent feed, steplessly adjustable (on dia) at left or right hand table reversal, or both: 0.001 - 0.05 mm/sec. - Plunge feed, steplessly adjustable (on dia): 0.0002 - 0.1 mm/sec. - Maximum depth of plunge on dia: 1.7 mm Motor rating - Wheel spindle, standard: 3 kW - Wheel spindle special rating: 6.25 kW - Workhead: 0.55 kW - Hydraulics: 0.55 kW - Coolant pump, standard: 0.17 kW - Coolant pump, inteclon: 1.1 kW Workpiece weight - Maximum between centers: 80 kg Extras: grinding wheels, coilets, other additional equipment, user manuals

Condition: good (used), Year of construction: 1981, operating hours: 16,769 h, Center height 175 , Center width 700 , Angled position of turntable 10° , Workhead swiveling 90° , Speed range 30-675 rpm , Morse 5 , Grinding headstock _ grinding wheel diameter 400 , largest width 50 , drive power 6,25kW Nodstz T H Dopfx Af Eswn