Used Stp for sale (221)

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC) SN:VPB9854111, without hard disk, serial no. according to photo, used, good condition, 100% functional, scope of delivery according to photos Kfedpoi Edlbofx Affoa

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Display range: 0–999.9 V rms Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - User manual - 4 current clamps Ksdpjx A Imzefx Affjfa - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.

Condition: used, machine/vehicle number: 5034414, Year of construction: 2020, operating hours: 10,000 h, load capacity: 2,000 kg, lifting height: 3,100 mm, load center: 500 mm, construction height: 2,025 mm, enginetype: Electric, manufacturer: Jungheinrich Kfsdpfx Afjx Epi Eofsa

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: SB 8015, SB 8000 linear blow molding machine, serial number 8015, year of production 2006 with a nominal capacity of 7200 bph (approx. 6000 bph with a 2.0l bottle), Machine after general renovation, in very good technical condition, all operating components replaced. The machine set includes: Preform feeder, easy and quick mold change system, electric stretching system, mechanical lifting system, powered by electric motors for a closing system with pressure compensation, 6-inch touch panel, smooth regulation of capacity in the range of 5000-7400 bph, function of eliminating deformed molds and cracked bottles. The machine is adapted to the PCO 1810 preform, it is possible to retool the machine for another preform. The machine is sold without blow molds, we can make molds according to the customer's design adapted to our machine. Kfodpst T Txqjfx Affea

Condition: new, mileage: 20 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,200 kg, loading space length: 6,600 mm, loading space width: 2,200 mm, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * Vehicle: * Discontinued model from 2024! Greatly reduced price! Available immediately! * Iveco Daily 70C18H (Permissible total weight 7,200 kg) * 3.0 HDI, 129 kW * Manual transmission * EURO 6 (Green emissions sticker) * Digital tachograph * Automatic climate control * Center armrest * Electric mirrors * Electric windows * ABS, ESP * Air suspension on rear axle (original Iveco Airpro) * Driver’s comfort seat (Active seat with weight adjustment) * Rear window * DAB radio, Bluetooth * Navigation system * ACC cruise control * Leather multifunction steering wheel * Central locking with remote control * Fog lights * LED daytime running lights * LED headlights * Lane departure warning system * Bodywork: * Fixed platform, full aluminum with 4 recessed channels * Body length: 6,600 mm (extra long) * Body width: 2,200 mm (extra wide) * Extra wide loading ramps incl. additional ramps (for car loading) * 2x transport rollers * Toolboxes * Tow bar, 3,300 kg * Beacon * Winch with remote control Kodpovufc Uefx Affofa * Loading area lighting If the vehicle is not in stock – short delivery times possible! * Ask us for a customized leasing or financing offer * Net export possible * Delivery from €199 Didn't find the right vehicle? Configure your own vehicle! Whether it's features, body style or engine variant. All at a fair price! You can also purchase just the bodywork for your existing vehicle from us! Don’t hesitate to contact us! * Images may show optional equipment not included in the base price. --- The information provided online is a non-binding description. They do not represent warranted characteristics. The seller is not liable for typographical or data transmission errors / changes / input errors. Please check the specifications directly on the vehicle before purchase. Subject to error / prior sale. This advertisement is an invitation to submit an offer.

Condition: used, AMADA-PROMECAM THREE-AXIS ELECTRONIC HYDRAULIC PRESS BRAKE MODEL STPC 160 30 S00308 NO. P171 (7385) Auction liquidation due to cessation of activity and definitive closure of a second-hand industrial machinery tools company Brand: Amada Model: STPC 160 T / 4100 Capacity: 160 t Length: 4100 mm Kfedpfexzua Eex Affea Folding length: 3.1 m CNC: Amada brand CNC Model: DNC 7000 Type: 160-40 STPC Stroke: 220 mm Motor Power: 13 kW Weight: 11,500 kg Pneumatic axes: 4 Tools included

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC) SN:VPA3852938, without hard drive, serial number as per photo, used, good condition, 100% functional, scope of delivery as per photos Kfodpfx Afei Edktsfsa

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 712537, LECTRA VT-FA-FX -72 CNC TEXTILE CUTTING MACHINE Year of manufacture: 2007 Height: 2.5 cm Width: 170 cm Kfedpfx Ajwzxx Ujffea Window length: 185 cm With continuous feed. CNC control In well-maintained condition Video available upon request. With PostPrint printhead

Condition: excellent (used), Lindner Bursting Test Stand Here we offer a Lindner burst test stand. AGB Bursting Test Stand TMM4 Technical data: AGB Bursting Test Stand TMM4 Year of manufacture 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5,5 kW Temperature range chamber: RT ... 180°C Temperature range medium: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Kfjdpfx Aelx A T Doffea Test medium: glycol / water Heat transfer oil Fragoltherm Q-HTF Dimensions: length 2150 mm x width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz power: 5,5kW rated current: 8A Back-up fuse: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY For the commissioning of the burst test bench the following items are necessary: Pump, cooling tower & fire alarm panel these are not supplied. Type: AGB burst test rig TMM4 weight approx. 705 kg Condition: used / used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, functionality: fully functional, Winter service package for Nilfisk CR3500: + Snow plow Fiedler FRS 1504 180 kg hydraulically adjustable 150 cm wide + Roller spreader hydraulically driven 100 cm wide + Drop-side platform rear tipper aluminium side panels tarpaulin transport frame Kfedoxwm E Ejpfx Affoa + Control panel round connector Get all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: new, mileage: 20 km, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, overall weight: 7,200 kg, loading space length: 6,100 mm, loading space width: 2,200 mm, emission class: euro6, color: yellow, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * 3.0 HDI 129 KW * Automatic transmission * EURO 6 (Green environmental badge) * 70C18 Fixed platform, full aluminum premium construction * Extra-wide loading ramps incl. additional ramps * 2x transport rollers * Digital tachograph Ksdpfx Afsxx Hc Hofsfa * Body length: 6100 mm (5700 mm effective) * Automatic climate control * Center armrest * Touchscreen radio * Navigation system * Winch with wireless remote control * Electric mirrors * Electric windows * ABS, ESP * Air suspension on rear axle (original Iveco) * Toolboxes * Towbar (3,500 kg) * Beacon * Driver's and passenger's comfort seats (active seats with weight adjustment) * Rear window * DAB radio, MP3 * Cruise control * Leather multifunction steering wheel * Central locking with remote control * Fog lights * LED daytime running lights * LED headlights * Load area lighting * Lane keeping assist * City Brake Assist * Adaptive Cruise Control (ACC) If the vehicle is not in stock, short-term delivery is possible! * Ask us for a customized leasing or financing offer * Net export possible * Delivery from €199 Didn't find the right vehicle? Configure your own vehicle! Whether it’s equipment, body, or engine variant—all at a fair price! You can also purchase the superstructures only for your existing vehicle from us! Don't hesitate to contact us! * Images may show optional extras not included in the basic price. The information provided online is non-binding and does not constitute guaranteed features. The seller is not liable for typographical or data transmission errors / changes / input errors. Please check the accuracy of the features directly on the vehicle before purchase. Errors and prior sale reserved. This advertisement constitutes an invitation to submit an offer.

Condition: used, AMADA-PROMECAM THREE-AXIS ELECTRONIC HYDRAULIC PRESS BRAKE MODEL STPC 160 30 S00308 No. P172 (7384) Ksdexzt Tkepfx Affofa Liquidation by auction due to cessation of activity and final closure of a used industrial machinery trading company. Brand: Amada Model: STPC 160 T / 4100 Capacity: 160 t Bending length: 3.1 m CNC: Amada DNC 7000 Type: 160-40 STPC Stroke: 220 mm Motor power: 13 kW Weight: 11,500 kg Pneumatic axes: 4 Tooling: included

Condition: used, mileage: 93,330 km, power: 110 kW (149.56 HP), first registration: 10/2009, fuel type: diesel, empty load weight: 5,600 kg, maximum load weight: 3,700 kg, overall weight: 9,300 kg, axle configuration: 4x4, wheelbase: 2,700 mm, next inspection (TÜV): 12/2024, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 3, loading space length: 2,480 mm, loading space width: 2,030 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, all wheel drive, cabin, cruise control, differential lock, fog lights, hydraulics, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, license plate house, 1x air-suspended seat, rear window, electric window left, electric window right, air conditioning, Telligent gearshift, ABS (anti-lock braking system), differential lock, work lights, revolving beacon, trailer coupling with air and electricity, green environmental badge. Wheelbase: 2700 mm. Body: three-way tipper, 8,331 operating hours. Gearbox: DC-8 powershift UG100, dual-circuit proportional hydraulic system 3 sections, separate return line front and center, pressure line front and center for second hydraulic circuit, plough relief, differential lock front and rear axle, permanent all-wheel drive with lockable longitudinal differential, winter service mounting plate size 3. Gross train weight: 17,300 kg. Current operating hours: 8,334! Available at extra cost: Kfodpfxsvhmuxe Affea Flötzinger snow plough -9393- DK-SA and Gmeiner spreader -9385- 1500 TC FS! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to alterations, prior sale, and errors!

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm throat: 320 mm ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch table-size: L x B: 4110 x 180 mm work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions Kfjdpeu Icc Aefx Affea rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Control DNC 7000, graphic display, PC software equipment: Cutting zone lighting stroke counter div. Tools optional *

Condition: used, machine/vehicle number: d25bedc76ae946ce00df59d5c, empty load weight: 11,600 kg, maximum load weight: 35,900 kg, overall weight: 47,500 kg, axle configuration: 3 axles, first registration: 06/1982, tire size: 9,5 r17,5 zwilling, Further information 1st axle rigid, 2nd + 3rd axle hydr. positively steered with saddle deflection wedge, 1 pair of hydr. support legs incl. hand pump for emergency operation, leaf suspension, 6 storage compartments, steel riffle plate complete, air: red-yellow + electrics: 1x 7-pin Length of gooseneck approx.: 4,380 mm Length drop deck approx.: 11,300 mm Saddle height approx.: 1,200 mm Kfodpfx Afji Riyzjfoa

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 11,000 kg, total length: 80,510 mm, total width: 42,180 mm, total height: 2,500 mm, LASER fr metal sheet and tube cutting Kfedjxlk U Hopfx Affoa

Condition: new, mileage: 20 km, power: 152 kW (206.66 HP), fuel type: diesel, gearing type: automatic, overall weight: 7,000 kg, loading space length: 6,600 mm, loading space width: 2,200 mm, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * Vehicle: * Iveco Daily 70C18H (Permissible total weight 7,000 kg) * 3.0 HDI 152 kW * Automatic transmission * EURO 6 (Green environmental badge) * Digital tachograph * Automatic climate control * Center armrest * Electric mirrors * Electric windows * ABS, ESP * Rear axle air suspension (original Iveco Airpro) * Comfort driver's seat (active seat with lumbar adjustment) * Rear window * DAB radio, Bluetooth * Navigation system * ACC cruise control * Leather multifunction steering wheel * Central locking with remote control * Fog lights * LED daytime running lights * LED headlights * Lane departure warning system * Emergency braking assistant * Blind spot assistant * Bodywork: * Fixed full aluminum flatbed with recesses (4x) * Body length 6,600 mm (extra long) * Body width 2,200 mm (extra wide) * Extra wide loading ramps incl. additional ramps (for car loading) * 2x transport rollers * Toolboxes * Trailer hitch 3,500 kg * Beacon * Winch with remote control * Load area lighting If the vehicle is not in stock – short delivery times possible! * Ask us for a tailored leasing or financing offer * Net export possible Kfsdpfjxhbfhsx Affoa * Delivery from €199 Didn't find the right vehicle? Configure your own vehicle! Whether equipment, bodywork or engine variant. Everything at a fair price! You can also purchase only the bodies for your existing vehicle! Do not hesitate to contact us! * Images may show optional equipment not included in the basic price. ---- The information provided online is non-binding and for description purposes only. It does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors, changes, or input errors. Please verify the specifications directly on the vehicle before purchase. Errors and interim sales reserved. This advertisement is an invitation to submit an offer.

Condition: new, Year of construction: 2025, PRO-Version of our standard Sleeve packer / film band roller with stacking unit for stacking products into 1-5 layers and/or in multi-rows. Suitable for cigarette packs, soap, toothpaste, stationary, etc. Fully automatic infeed of products, automatic transport into optional tunnel (SHRINKtunnel-PE-XL) and outfeed. Completely closed housing, new design and strong structure. - Technical Specifications (can vary regarding customers specifications !): MITSUBISHI/Japan PLC; 380V, 2kW; 6bar / 0.1m³/min; up to 15 cycles/min; max. product dimensions (mm) L(50-550)xW(50-290)xH(15-250); machine dimensions (mm) L1300xW2305xH1800; weight (net/gross): 600/650kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kfsdsv Nl I Tspfx Affoa

Condition: used, empty load weight: 9,000 kg, maximum load weight: 25,500 kg, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 01/1977, loading space length: 8,250 mm, loading space width: 2,500 mm, loading space height: 900 mm, total length: 2,500 mm, total width: 1,750 mm, suspension: steel, tire size: 8.25 R 15/18 PR, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, BPW axles, leaf suspension, forced steering, access ramps can be attached Superstructure: Saddle height approx. 1,250 mm, both axles with forced steering, gooseneck 4,100 mm, turning dimension from corner/slope to kingpin center 1,800 mm, drum brakes ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ksdei Rqwfepfx Affsfa - .

Condition: like new (used), Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - width of the finished element min 700 mm - cutting height min / max - 20/140 mm - disc diameter 600 mm - spindle diameter 30 mm - engine power 2 x 7.5 kW - feed roller table 2570 mm width of rollers 500 mm diameter 100 mm - diameter of connections 2 x 160 mm Kfodemv Ehzopfx Affea 3 Multisaw Storti Multibi R 16 - material width max 150 mm - material height max 140 mm - engine power 2 x 22 kW - disc diameter max 300 mm - spindle diameter 50 mm - spindle height 160 mm - hydraulically adjustable feed - hydraulic side material pressure - two upper pneumatic clamps - connector diameters 2 x 220 1 x 160 mm - receiving conveyor 2000 mm - cross conveyor table 3200 x 1100 mm

Condition: used, machine/vehicle number: 141, mileage: 520,200 km, power: 324 kW (440.52 HP), first registration: 09/2009, fuel type: diesel, empty load weight: 11,120 kg, maximum load weight: 14,880 kg, overall weight: 26,000 kg, tire size: 295/80 R 22,5, axle configuration: 6x4, wheelbase: 3,200 mm, brakes: other, color: grey, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel, loading space volume: 12 m³, loading space length: 4,880 mm, loading space width: 2,420 mm, loading space height: 980 mm, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, hydraulics, low noise, parking heater, traction control, trailer coupling, Urea tank (AdBlue) Engine capacity 10,518 ccm EBS EVB Automatic air conditioning Schwarzmüller all aluminum drop sides swinging and foldable sideways with lifting springs Rear also swivels to the right 1 couch Sun visor 3rd + 7th gear scrapes Rotating beacons Kodpfx Afep Nmnkefofa Errors excepted

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net including BINZEL UP DOWN HOSE PACK or Fronius AW hose package with display on the torch including connection conversion (+€500) ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) Kodpfx Afowbillsfefa ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful wire feed case – the wire is safely stored in the enclosed case. ➤Fronius Intermediate Hose Package (Long) – Each device comes with a 5-meter-long connecting hose package between the power source and the wire feeder case for greater flexibility and better handling. Take the wire feeder case with you to places that are difficult to reach! The connecting hose package is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤Fronius Large Trolley – Arguably the best trolley with gas cylinder holder on the market. ➤Binzel Hose Package – With up/down amperage adjustment on the torch. ➤3-4m Earth Cable ➤New Messer Pressure Regulator ➤New Basket Spool Adapter for Large Wire Spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features tracer wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a device will receive an additional --> 2nd hose package free Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any worn parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We know about these devices and don't sell anything we don't know about.

Condition: like new (used), FRONIUS TPS 4000 CMT AUSTRIA * We offer the devices in a wide variety of configurations and always have several sets in stock. TPS / CMT / HAND / ROBOT all in stock and available immediately! Sample images of the article. Various CMT hose packages UNIVERSAL or HOLLOW SHAFT robots. A large number of different spare parts in stock, just send us a quick email or call or Whatsapp. The prices stated are all from ... euros. The prices/offers are created individually according to the device configuration. SCOPE OF DELIVERY: .) Fronius power source (Tps 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius wire feeder VR 1550 CMT or VR 7000 CMT .) Fronius intermediate hose package .) Fronius trolley optional or stand console .) Fronius hose package Robacta CMT version depending on availability .) Fronius RCU 5000i remote control or standard insert (standard operation) .) Harris pressure reducer new and in original packaging .) Ground cable 4m 50mm2 Interface optionally available for an additional charge -> Profibus approx. 800, Interbus 500 euros, Devicenet approx. 800 euros ... Also reachable via Whatsapp and Viber Stocked in Vienna 1230 (Vienna) Shipping on pallet possible for an additional charge: Ksdpfjhpzvwex Affjfa Austria approx. 180 euros Germany approx. 230 euros Europe on request All prices are starting from prices you can configure the devices with us. Robot device or hand device. Long connecting hose package or short. A wide variety of hose packages to choose from. Synchropuls. 270 400 or 500 amp devices in stock. Cmt version available as hand or robot. The best thing to do is to call us, we will discuss your area of application and you will receive an initial price estimate from us.

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Kfjdswbh Ifjpfx Affsa We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: as good as new (ex-display), functionality: fully functional, FRONIUS TPS 4000 ROBOT SET .) Fronius power source (Tps4000) .) Fronius cooling unit (Fk 4000) .) Fronius wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package .) Fronius RCU 5000i .) Interface = INTERBUS RUGGED LINE Kfsdpfx Aewbi E Seffoa (Optionally available: Profibus + €800 or Devicenet + €1400, others upon request) Manufacturer's list price: approx. €14,000 net We have €5,990 net - VAT deductible - invoice from the dealer. We always have several devices in stock in a wide variety of configurations. We are happy to receive your inquiries. The prices listed start at €... Prices/offers are customized based on the device configuration. Sample images of the devices. In stock in Vienna, 1230. Pallet shipping available for an additional charge: Austria approx. €180 Germany approx. €210 Europe upon request