Used Storage Systems for sale (39,111)

Year of construction: 2016, condition: used, In stock first week of September Iedpfx Afew S Dn Ijietn

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Itodpfjw Hz T Ejx Afisn

Condition: not inspected (used), Year of construction: 2002, Sterling Fluid Systems TD20D skid mounted pump Serial no: 0222034/1 (2002) 8500 litre/min 9 bar Itjdpswdxq Ajfx Afisn 340mm impeller diameter With Firepac (by Cummins Diesel) drive and wall mounted control

Condition: ready for operation (used), Year of construction: 2011, Connected load: 36kW, length: 2750mm, width: 2750mm, height: 2000mm, weight: 2.5t, with documentation, operating hours: 20h, an on-site inspection is possible. Itsdpfjqi D Tgjx Afisn

Year of construction: 1988, condition: good (used), Bucket sealer Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Isdpsigyp Hjfx Afietn Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Features: manually positioning of bucket automatic seal process (adjustable time) automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Condition: excellent (used), Year of construction: 2024, operating hours: 3,855 h, functionality: fully functional, machine/vehicle number: 1200F001894YW, Loading weight: 115–128 kg Drum volume: 1154 l Filling ratio: 1:10 – 1:9 Spin speed: 695 rpm G-factor: 350 Standard features: - Direct steam heating - Freestanding, high-speed - Machine housing made of chrome-nickel steel (AIS 304) Itsdpfx Asw Nw Euofijn - Inner and outer drum made of chrome-nickel steel - Perforated inner ribs / PowerWash - Higher mechanical action - Low water consumption - Intuitive touch control XCONTROL FLEX PLUS

Condition: excellent (used), Year of construction: 2022, operating hours: 7,500 h, functionality: fully functional, The used Sypro Dual 200 basic feed unit for UPS 3 for continuous or intermittent blister lines (width 700mm) is being sold due to the purchase of a new system. The machine was commissioned at the end of 2022. Tablet buffer supply with reject separation, 500mm buffer hopper, and 2 feed chutes. The first chute conveys products from the buffer hopper. In the second chute, products pass between two plates. The lower plate has holes through which broken pieces fall out. Removable tablet storage funnel. Axis: All axes are driven by servo motors. The feeder features the following axes: X, Y (crosswise and lengthwise to the film), upper and lower pin actuators for separation, Z-stroke for lifting from the film. Control: Machine control via Sigmatek RPS. Up to 500 products can be saved with all settings. Four access levels. Event logging. Ijdpfx Ajw Npgqofistn Performance: Throughput of the basic unit: 60 dosing cycles/min max. Maximum film speed: 20m/min Documentation: Various maintenance manuals Noise level: < 70dBA

Condition: good (used), functionality: fully functional, roll width: 410 mm, power: 0.12 kW (0.16 HP), roll spacing: 60 mm, axle spacing: 110 mm, drive type: Motorisiert, Roller conveyor curve/ curve 90 degrees Manufacturer: Soco System Condition: Used Model: Rollers Type: 90°degree Total width outside: approx. 1430 mm Total width inside: approx. 820 mm Total width incl. motor: approx. 580 mm Conveyor width: approx. 410 mm Roller spacing: approx. 60 mm Center distance: approx. 110 mm Roller type: Plastic Material: Steel/plastic Color: Galvanized, light grey, orange Including 2 motors Soco 0.12 KW In stock: 4 pieces Price per piece The conveyor technology has run until dismantling. Condition: fully functional, with signs of use Itjdpfsttcp Sox Afijn Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We will be happy to provide you with an individual quotation or advise you on the design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of sectors, such as logistics, the pharmaceutical industry, trade or Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting technology or supplementary components such as order picking racks or containers.

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Isdpfsw Inpnjx Afiotn

Year of construction: 1998, condition: ready for operation (used), A Cookson dispensing machine for the SMT industry is available. Dispensing capacity 50 mil pitch solder paste: 25000 dots/h, dispensing capacity 3mm pitch SMD adhesive: 22000 dots/h, dispensing range X/Y: 450mm/450mm, travel X/Y/Z: 483mm/483mm/55.8mm, feed X/Y: 406mm/s, SMEMA compatibility: available. Including spare parts, seals, hoses etc. Documentation available. On-site inspection is possible. Iedpfxevx Tw Uo Afistn

Year of construction: 2009, condition: excellent (used), stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC Itodpfedwhf Nsx Afion

Year of construction: 2005, operating hours: 5,870 h, condition: good (used), functionality: fully functional, POWER SYSTEM AIRTEC screw compressor Junior 5.5/385 +DF 13 Production POWER System Italy Year 2005 S/N 250911 Operating hours 5875 ( last maintenance 11/2023) Screw compressor with direct drive compact, reliable, quiet with air dryer max 13 bar Output 780 l/min Isdpjt Iq H Uofx Afiotn Tank volume 300 l with DF 13 air dryer Motor 5.5 kW (400V, 50 Hz) Weight 382 kg CE-marked Technical specifications subject to change

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, Equipment: rotational speed infinitely variable, Crusher Equipment Including: Special tools, reinforced, 7/7 tool carriers with 4 tools each (tools consist of main, pre-crushing, and post-crushing blades) Shaft speed individually and infinitely adjustable, approx. 0–41 rpm Including post-crushing bar Iodpfx Afou Hglljijtn Including tilting skip Drive Unit Drive power: 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swiveling cooler Electrics / Controls Including IFM display Including radio remote control Including four shredding programs (wood, waste, special, and green waste) Discharge Conveyor Including discharge conveyor Custom Equipment Including preliminary armoring of tools Including overband magnet, hydraulically height adjustable – neodymium – Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Including pressure sensors Including additional noise-reducing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: S120598-5-10, STOPA Storage System – 66.15 m Length – 850 Pallet Positions – Year 2014 – Excellent Condition We are offering for sale a high-performance industrial pallet storage system by STOPA, serial number S120598-5-10. Total system length: 66.15 meters Total pallet positions: 851 Actual usable pallet positions: approx. 600 Platform dimensions: 3000 x 1500 mm each Number of towers: 33 Pallet slots per tower: 29 Loading/unloading stations: 11 Minimum required ceiling height for installation: 9.4 m Year of manufacture: 2014 Condition: Very good – clean and well-maintained Itodpfxsw Eb N Do Afien The system is currently dismantled and stored indoors at a warehouse in Piaseczno, Mazowieckie, Poland. Live demonstration is not possible, but the system was fully functional at the time of disassembly. Complete technical documentation is available. Assistance with loading and transport can be provided. Reason for sale: reconfiguration of warehouse layout. This is a premium solution for companies seeking to expand or modernize their pallet storage capacity with a reliable, high-throughput system. For further information, photos, or to arrange an inspection, please contact us.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Iodpsnkalgefx Afijtn Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: not inspected (used), Tank, Plastic Tank, Liquid Storage, Liquid Tank, Used Machine Overall dimensions: Height 2500 mm Diameter 2000 mm Tank Capacity: 6 m3 Material: PE (Polyethylene) Manhole Diameter: 580 mm Liquid Drain, Filling Pipe Diameter: 100 mm There is no liquid level indicator, and we have not conducted a leak test on the tank. Iedpfxsra Dahe Afistn There are several pieces

Year of construction: 2003, condition: like new (used), machine/vehicle number: D150P511007, 2003, stainless single shot depositor, rise and fall head, 25L depositor, mobile frame, Itsdpfx Ajdwhfgjfisn

Condition: good (used), Line was filling jars with chutneys and fruit sauces. Lovely condition. Itodpetux H Iofx Afisn

Condition: new, Year of construction: 2024, functionality: fully functional, The SR 8 screw compactor from Koltex is an advanced solution designed for drying film flakes and preparing them for the extrusion process. This innovative machine effectively reduces the moisture content of the material to around 5%, significantly impacting the quality of the final recycled product. Modular construction The machine can be customized to meet the individual needs and requirements of the customer, allowing it to be used to its optimum potential in a wide variety of applications. Reliability Isdpfx Aeuqwzwjfistn The use of renowned drive components with a high degree of efficiency reduces operating costs while extending service intervals. Intelligent machine operation Touch panel with intuitive interface for easy control and monitoring of the working process. Space-saving The press is designed to be compact, saving valuable space in the workplace. Capacity (LDPE film): 1500 KG/H Auger diameter: 500 mm Engine power: 45 kW Scraping power: 7.5 kW Feed size: 760x650 Overall dimensions: 6097x1833x2729 Weight: 6800 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Iodpfswqg Iiex Afijtn Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Itjdpohb Dtpefx Afion Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: good (used), Year of construction: 2011, Turbo Rotary Rotary filling line Serial: R0061192 Isdpsr Uftrofx Afiotn 2011, Stainless, rotary filling line, consists of Turbo D253P depositor, denester, lid applicator and lid sealer and outfeed conveyor, previously used for filling four pots of sauce in a multipack, tooling dimensions 100mm x 100mm, touch screen controls, 3Ph

Condition: excellent (used), Extremely rare machine, possibly the only one for sale in the world today. Gas flush whole bins or dolavs of product. The CV-Tek® CVP Systems A-200 Overhead model line brings the advantages of Modified Atmosphere Packaging to large and bulk items. Full pallets and dolav bins can now be processed efficiently. Being suspended from either the ceiling or wall allows excellent logistics for moving bins and pallets during processing. Itsdpfei E Tt Hox Afijn Wrinkle free seals are achieved with seal bars of 100 inches (2540mm) and automatic bag stretchers. Floating head prevents bag pullout.

Condition: excellent (used), Flake ice machine on stand, can produce up to 2.5 tonnes per day of flake ice. Lovely condition. Iodpfeh Nnd Rjx Afijtn

Condition: good (used), Very high throughput spiral freezer, was freezing over 3 tonnes per hour of fried Mc chicken burgers so very well maintained. 910mm wide belt, 28 tiers, 84mm product height. Professionally dismantled. Refrigeration plant available separately. Iodpohrm Ngsfx Afietn