Used Stone Splitter for sale (1,218)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x2000x1950 mm Weight 1500 kg Total power requirement 5 kw Fedpfx Acjv A E S Ee Nsfu

Condition: new, Year of construction: 2025, Yanigav Log Splitter FBA26 • Weight: 350 kg Fsdsr D Nhfjpfx Ac Njfu • Dimensions (LxWxH): 1.0 x 2.0 x 0.9 m (working width: 2.9 m) • Force: 26 t • Drive: hydraulic pump • Log length: up to 110 cm • Log diameter: min. 30 cm • Wedge length: 38 cm

Condition: used, Hard stone plate, granite plate, granite block Hard stone block, angle block precisely machined on all sides Measuring cube, measuring plate Length: 1590 mm Width: 300 mm Height: 470 mm - 2 drillings Ø 80 mm Fsdpfxog Uar Dj Ac Nofu - 2 drillings Ø 120 mm - Threaded inserts mainly M16, some with M12 and M18 Net weight: 570 kg Good condition

Condition: used, Hard stone slab, granite slab, granite block, measuring cube Hard stone block, angle block precisely machined on all sides Fedpeh Uhq Djfx Ac Nofu The granite slab comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm - 5 support blocks with leveling screws approx. 400 mm - 8 threaded bushes in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushes M16 - Small chipping on one edge of the top Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of measuring plate: 1500 kg Weight of granite feet: 100 kg very good condition

Year of construction: 2014, condition: used, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of construction 2014 Approx. 3000 operating hours Incl. mobile deck 0/120 and stationary deck 0/60 Screening of materials that are difficult to screen, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, organic waste, landfill deconstruction in 2 fractions - Drive: Generator type 50 kVA / voltage 400/230 V / frequency 50 Hz / speed 1500 rpm / fuel tank capacity 250 liters / diesel fuel - Feed hopper: length 2700 mm / width 2100 mm / loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / width 2500 mm / drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / separating cut 0-80/120 mm Ffodpewhza Uofx Ac Nju - Feeder belt FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW controlled via frequency inverter / Folded design, incl. hopper for receiving the discharge belt on the shredder / Chevron belt quality - Bottom grain collecting belt, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnetic separation / Chevron 16 mm belt quality - Bottom grain collecting belt crosswise FC: length 1600 mm / width 1000 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile undersize discharge conveyor: length 4460 mm / width 1000 mm / drive 1 x 4.0 kW / can be extended by FE fraction / belt quality Chevron 16 mm - Oversize grain collecting belt FC: length 5300 mm / width 1200 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile oversize grain discharge conveyor: length 7350 mm / width 1700 mm / drive 1 x 5.5 kW / can be extended by FE fraction / discharge height 5000 mm - Control cabinet: Complete electrical control via a PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and work functions - Mobility: Electric crawler/tracked chassis with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) - Blue conveyor belt approx. 3000 x 1300 mm LW Transport dimensions approx. 13600 x 3000 x 3100 mm LWH Weight approx. 21000 kg Sold on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Errors in the description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, Year of construction: 2012, No. 10020 Spiral shaft screen GÜNTHER SPLITTER Semimobil Used, year of construction 2012 Screen grain size 0/100 2-fraction star screen Fedpfx Aowhzccoc Nofu Cross discharge belt undersize splitter Extension web Horizontal cross feed belt Matching feed belt on splitter Blue-green conveyor belt approx. 5000 x 1000 mm LW Blue conveyor belt approx. 4500 x 1000 mm LW Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive - Weight: 335kg - up to 110cm log length - Log lifter - Two speeds Fsdpfx Ajtpxgtoc Nofu A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Prices: Power Split S22 = 2.670€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. Fodpetpw R Tsfx Ac Nsfu The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive - Weight: 335kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Prices: Power Split S22 = 2.670€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!

Condition: new, With the Brugger Power Split S30, we present a powerful vertical log splitter that impresses with a splitting force of 30 tons. This robust machine is extremely versatile and offers maximum flexibility in terms of drive, whether through the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be split quickly and efficiently. Special features: - 30T splitting pressure - Combined drive: 5.5kW electric motor & PTO drive - Weight: 386kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S30 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available as an option. The Brugger Power Split S30 is the ideal choice for anyone who needs a reliable and powerful solution for splitting wood, whether for professional or private use. Prices: Power Split S30 = 2.960€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Ffsdpfxetpxgdj Ac Nsu Contact us for your customized offer!

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg Ffedjupiapspfx Ac Nju - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. Ffodpfsuph Uxex Ac Neu - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, ELMAG STBS-500 masonry band saw STBS for dry cutting (bricks, aerated concrete, insulating material) The STBS series masonry band saws are specially designed for use designed for use on construction sites. In dry cutting, they are suitable for the precise processing of materials such as aerated concrete, bricks, lightweight poroton, expanded clay and wood, but also for insulation boards such as Styrofoam and Styrodur. ADVANTAGES Connection piece for dust extraction available Saw blade tension easily and optimally adjustable with handwheel Includes forklift pockets and lifting eye Constant saw blade tension and 440 mm running wheels for reduced risk of blade breakage and precise cuts Direct drive with geared motor on extra motor console Automatic saw blade switch-off at the end of the cut Machine stops when the doors are opened Short saw blade change times Straight, miter and manual contour cuts possible Precise band guide, adjustable to the block height Easy relocation thanks to transport wheels and transport bar Ffjdpfx Acst Egfzo Nsu TECHNICAL DATA Cutting height 500 mm Cutting length 660 mm Angle 0 - 45 ° Saw blade dimensions 3850x27 mm Table size 710x1060 mm Rated power 1.85 kW Mains connection 230/50 V/Hz Dimensions 1050x900x1840 mm Weight 203 kg

Condition: new, ELMAG Stone cutting machine (incl. slide) STM 900/350 K, 230 Volt With or without miter table K Quality machines up to 110 mm cutting depth, ideal for natural stone and gardening companies, pavers and stonemasons. Easily movable, lockable cutting unit with handy handle, Protective cladding with cooling water connections and splash guard Professional stone cutter With the STM models, ELMAG offers professionals a wide selection of flexible, high-quality stone cutters. In addition to the usual 'normal cut', these tried and tested machines also master heavy granite floor slabs and complex mitre cuts on steps or concrete and stoneware mouldings. The tried and tested details and working aids of these particularly robust, fully galvanized stone cutting machines meet the expectations of a modern, reliable machine with a long service life. All models are available with or without a mitre table and are optionally Fsdpfx Acjt Hvmke Nofu available with a 230 V AC or 400 V AC drive motor. available. ADVANTAGES Disc cooling with dosing valve Corrosion protection: fully galvanized design Pull-out water tray With infinitely adjustable mitre table 0 - 45° Very powerful drive motor Safety switch with zero-voltage release Easy transportation on plastic castors, four carrying handles TECHNICAL DATA Cutting capacity depth/length 110 / 900 mm Angle 0 - 45 ° Diamond cutting blade Ø 350 mm Diamond blade bore 25.4 mm Rated power 2.2 kW Voltage/frequency 230/50 V/Hz Dimensions 1350x780x1300 mm Weight 97 kg

Condition: new, ELMAG Stone cutting machine (incl. slide) STM 600/350, 230 Volt STM 610/350 The impressive stone cutting machines deserve a closer look due to their robustness, perfect handling and, last but not least, a very good price/performance ratio. It simply cuts everything: tiles, exposed aggregate concrete slabs, paving stones, marble and granite, bricks, clinker, artificial stone ... Ideal for construction companies, gardening firms and pavers. ADVANTAGES Lockable spring tensioner for resetting in two saddle bearings S1 water pump Fjdpfx Acjt Hvlgo Nsfu Disc cooling with metering valve Powerful drive motor 2.2 kW / 230 V Safety switch with zero-voltage release Long service life: roller table steel rollers above water Precise: Adjustable longitudinal stop, measuring scale Unsurpassed cutting unit for very large cutting depth in reverse cut. Includes segmented diamond blade for universal use TECHNICAL DATA Cutting capacity depth/length 105 / 600 mm Diamond blade Ø 350 mm Diamond blade bore 25.4 mm Rated power 2.2 kW Voltage/frequency 230/50 V/Hz Dimensions 1130x570x1600 mm Weight 72 kg

Year of construction: 2023, condition: new, functionality: fully functional, Circular saw on steel walls for stone with the possibility of straight cutting and at any angle from 0° to 45°. Machine with a work table tilt of up to 85°, with rotation of 0° - 45° - 90° - 180° - 270°. The head tilts every 1° in the range of 0°-45°, without rotation, allows for cutting blades. Due to its weight, the machine is very solid and stable. The machine uses manual central lubrication and straight gears. The maximum diameter of the saw is 1200mm. The highest quality components from Siemens and Schneider were used in the circular saw. The machine is controlled using a touch screen and joysticks and buttons on the control panel, as well as a wireless remote control. The main engine has an inverter that allows for smooth speed regulation. A built-in laser can be used to set the cutting line. Manual limit switches were used on the Z axis to determine the limit positions. Machine features: • Possibility of cutting at an angle of 0°-45° with a tilt of 1° Ffodpfx Aceqazbbe Neu Precise setting of the cutting angle every 1° enables a wide range of applications, from simple cuts to complex work with materials of various shapes. This solution is ideal for cutting blades, which makes the machine extremely versatile. • Tilting work table (0°-85°) and full table rotation (0°-360°) The work table with an angle of inclination of up to 85° allows convenient and safe processing of heavy blocks of stone. Additionally, full 360° table rotation with stops (0° - 45° - 90° - 180° - 270° - 360°) allows precise positioning of the material without the need to reposition it. • Laser cutting line indicator The built-in laser indicator facilitates precise positioning of the material and cutting line, which increases work accuracy and reduces the time required to prepare for cutting. • Touch control and joysticks The machine is equipped with a modern Delta touch panel and joysticks for manual control, which makes operation intuitive, and adjusting operating parameters to the operator's needs quick and precise. • Solid, heavy construction The DSL-1200 45Q circular saw is very massive, which ensures stability during operation, even when cutting large and heavy blocks of stone. This stability increases cutting precision and reduces vibrations, which translates into higher cutting quality. 👌 This machine is available "immediately", it is located in our warehouse in Poland - ul. Cisowa 3, Bilcza 26-026 Morawica | you can arrange a visit to see the machine working "live"

Year of construction: 2023, condition: new, functionality: fully functional, Stone circular saw for masonry applications, capable of performing both straight and 45° angled cuts. The machine features a tilting worktable up to 85°, with table rotation ranging from 0° to 90°. The cutting head is tiltable from 0° to 45°, without rotation. Due to its weight (~6 tons), the machine is extremely robust and stable. Straight-toothed racks are used in the construction. The maximum saw blade diameter is 700 mm. The circular saw is equipped with the highest quality components from Siemens and Schneider. Machine control is provided via a touchscreen and control panel buttons. The main motor and axis drive motors are fitted with inverters, enabling smooth speed adjustment. A built-in laser can be used for setting the cutting line. The Z-axis is hydraulically driven. Manual limit switches are used to set terminal positions. The machine can operate in either manual or automatic mode. In manual mode, the machine is primarily operated with buttons on the control panel. In automatic mode, it is possible to save several different cutting programs for the X-axis (left-right) and Y-axis (front-back). Ffodpfx Acsqy Ebhj Nou ✔ Cutting Modes * Manual – head movement controlled via joystick on the control panel * Automatic – head movement is automatic according to preset cutting programs ✔ Machine Construction * Durable, stable foundations * Reinforced main gantry * Tool head tiltable up to 45° * Tilting table up to 85°, rotatable 0° – 90° ✔ Movement in Specific Axes * X-axis – cutting motion left-right (tool carriage movement along the gantry) * Y-axis – gantry movement front-back (gantry movement along horizontal guides) * Z-axis – vertical movement of the head * A-axis – tilt of the head (0° – 45°)

Year of construction: 2023, condition: new, functionality: fully functional, The SHAMP-3200 single-head stone polisher, automatic polisher, is a professional machine that is used for polishing, grinding and brushing the stone surface and calibrating the thickness using diamond wagons. The monoblock construction ensures no additional costs such as pouring foundations for the table. An additional advantage is the ability to move the machine to another place at any time and the ease of installation. The single-head, bridge-type stone polisher is convenient to use and allows for quick and effective polishing work on most stone surfaces. The slide is guided by a linear guide immersed in oil, with long service life, high machining accuracy and an advanced control system. The machine is equipped with a PLC controller and high-quality components: Xinje touch screen, Zhengtai contactor, Schneider switching power supply, Omron relay, Omron proximity sensor. In the SHAMP-3200 polishing machine we can process stone with a thickness of 10-120 mm. Grinding head with the possibility of mounting 6 polishing wagons. Pneumatic pressure with an air demand of 0.6m³. Z axis travel equal to 110mm. The limit switches are set manually. The machine has a tilting work table up to 85° (hydraulic lifting), which greatly facilitates the loading of stone in machines of this type. This allows for easy and quite precise positioning of the stone in the appropriate position for grinding. Ffjdpfx Acjg Iph Re Neu The machine uses separate inverters to regulate the feed speed on the X axis and the Y axis. Their power is appropriately adjusted, so you can precisely control the axis feed speed, which is particularly useful in this type of stonemasonry machines.

Year of construction: 2024, condition: new, Stone circular saw with the ability for straight and 45° angle cuts. Basic version supplied with a tilting work table up to 85°, without table rotation, which significantly reduces the final price of the machine. Monoblock construction eliminates additional costs such as foundation pouring under the table, and allows for the machine to be relocated at any time. Tilting head 0°–45° with rotation 0°–90°. Due to its weight, the machine is exceptionally sturdy and stable. The machine is equipped with automatic central lubrication and helical gears, resulting in much quieter operation and increased longevity. Maximum saw blade diameter is 650 mm. The machine uses only highest quality components from Siemens and Schneider. Control is provided via touchscreen, joysticks and panel buttons, as well as wireless remote control. The main motor is equipped with a frequency inverter for smooth speed regulation. Cutting modes: ✅ Manual – in manual mode, the machine is operated mainly via joysticks on the control panel. There is also an option to move the head by a specified distance along a given axis ('manual move distance'). This makes it possible to precisely shift the saw edge, e.g. by 200 mm to the right. ✅ Automatic – in automatic mode, up to 12 cutting programs can be stored on the X axis (left-right) and Y axis (forward-backward). Additionally, it is possible to choose whether the saw will return to its home-safe position after completing the cutting program. Machine description: ✅ Monolithic base with two horizontal beams – replaces foundations; no additional costs (pouring foundations under the table or load-bearing walls), with relatively easy relocation at any time ✅ Robust main gantry – cast iron construction ✅ Tool head tiltable up to 45° with integrated laser ✅ Monolithic steel base with two horizontal beams (replaces foundation) ✅ Worktable tiltable up to 85° ✅ Tool head tiltable up to 45° with laser ✅ Table tiltable up to 85° ✅ Simple and quick machine programming ✅ Manual and automatic operation modes available ✅ Electrical cabinet components based on Schneider and Siemens components Ffedsg I Dniepfx Ac Nou Axis movements: ✅ X axis – cutting movement right-left Tool carriage movement on the gantry, driven by helical rack and pinion; linear guide bearings ✅ Y axis – bridge movement forward-backward Bridge movement along horizontal guides, driven by helical rack and pinion; linear guide bearings ✅ C axis – head rotation Head rotation with blade from 0° to 90° ✅ A axis – blade tilt Blade tilt 0°–45° ✅ Z axis – vertical blade movement Hydraulic drive ensures accuracy and precision of cuts, manually set limit switches

Condition: new, Year of construction: 2024, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. Fsdpfxsv Dvfro Ac Nsfu The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Year of construction: 2004, condition: good (used), Line for cutting and splitting firewood PINOSA Fjdpfxelwpgbj Ac Nofu Brand - PINOSA Italy Model - EPC 3300 Construction year - 2004. The condition is excellent, the machine is in operation and it is possible to test it. Cutting with a circular saw from Vidia material. Fully automated with the possibility of cutting only, as well as cutting and splitting. Max cutting diameter 40cm. Max log length 4m. Pressure force 35 tons. Electric motor power - 2x22 kW.

Condition: good (used), Line for cutting and splitting firewood PINOSA Fodeuzxkvspfx Ac Njfu Brand - PINOSA Italy Model - EPC 3300 Construction year - 2004. The condition is excellent, the machine is in operation and it is possible to test it. Cutting with a circular saw from Vidia material. Fully automated with the possibility of cutting only, as well as cutting and splitting. Max cutting diameter 40cm. Max log length 4m. Pressure force 35 tons. Electric motor power - 2x22 kW.

Year of construction: 1992, condition: excellent (used), functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x250x50mm Perpendicularity 1µm 4-sided! Ffodoq I R N Rspfx Ac Neu Measurement report on request for an extra charge

Condition: like new (used), Year of construction: 2001, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 1000x275x100mm Perpendicularity under 1µm! Incl. Kunz vacuum slide and Mahr measuring probe Fsdpoix Ahxofx Ac Njfu Measuring protocol on request against surcharge

Condition: new, 2250m² POSTEN Stone Design Decor facing bricks - Regular selling price 56.600,- This item consists of: 2x pallet Tuscany each 63sqm = 126sqm 12x pallet Tenerife each 55sqm = 660sqm 4x pallet Nuanced 48sqm each = 192sqm 7x pallet Nuanced per 24sqm = 168sqm 14x pallet Mini Euroc per 48sqm = 672sqm 12x pallet Mini Euroc per 36sqm = 432sqm Cover your wall with Decor Euroc and be inspired by the impressive resemblance to rustic natural stone. The Decor Euroc stones are inspired by spectacular mountains and cliffs and can be used both indoors and outdoors. The stones are made of concrete and are characterized by their robust, high-quality finish, which makes the stones colourfast and frost-resistant. Suitable for flat interior and exterior walls Natural appearance Strong concrete Product weight 1. 114 grams Product height 13.5 cm Product length 1 cm Product width 28.3 cm Brand Decor General Color Cream shade, White Mini,Tuscany,White Tenerife Line Euroc Ffjdpfx Acotrf Rze Nsu Number of pieces per pack 11 Forming rectangle Number of m² per pack 0.5 m² Style tile Concrete imitation Type of tile Stone strip Type of tile Material Concrete Material property Durable Finish Untreated Dimensions Tile thickness 10mm Application Application Walls Area of application Office, interior, living room, bedroom, kitchen Frost-resistant Yes Technical properties Glazed NO Shine NO Color-fast Yes Scratch-resistant Yes Relief Yes Full in the crowd Yes You can find more tiles - new and used - in our store! International shipping costs on request!

Condition: ready for operation (used), Size max 520 x 250 mm min 240 x 100 mm Book block thickness max 60 mm min 5 mm Speed max 20.000 c/h Fodpfxod Nzwvj Ac Nefu