Used Standing Seam for sale (7,014)

Condition: excellent (used), strip width: max. 1.560 strip thickness: 1 - 7 mm blade shaft Ø: 280 mm Knjdpsu H U Eyefx Apmea speed: max. 120 m/min Overhauling: 2017

Condition: excellent (used), strip width: max. 1.560 strip thickness: 1 - 7 mm blade shaft Ø: 280 mm Knedpsu H U Hdsfx Apmoa speed: max. 120 m/min Overhauling: 2017

Condition: good (used), functionality: fully functional, mileage: 149,000 km, power: 155 kW (210.74 HP), first registration: 04/2016, fuel type: diesel, maximum load weight: 2,090 kg, overall weight: 7,490 kg, axle configuration: 2 axles, wheelbase: 4,850 mm, axle spacing: 4,850 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6c, suspension: steel-air, number of seats: 7, total length: 8,520 mm, total width: 2,550 mm, total height: 3,500 mm, permissible axle load (axle 1): 3,600 kg, permissible axle load (axle 2): 4,600 kg, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,450 mm, loading space height: 2,350 mm, Equipment: ABS, AdBlue, air conditioning, airbag, cruise control, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, soot filter, tachograph, tail-lift, trailer coupling, truck registration, Address: Street 9, no. 33-35, 12309 Berlin-Lichtenrade (see last picture) Roof damaged. Roof structure without crossbars, headliner sagging! Technically in good condition. Engine and transmission function properly. Sleeper cab with bed, or as a 6-seater. Leaf spring/air suspension. 2 x tow hitch. Knodpfezkbk Ajx Apmoa Automatic transmission. Air conditioning. Auxiliary heater. Electric windows. Electrically adjustable exterior mirrors. Driver's air-suspended seat. Delivery possible upon request.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 7,768 h, load capacity: 2,000 kg, fuel type: electric, drive type: Elektro, Reach truck Condition: Ready for operation and fully functional Technical condition: good Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Description: We have 20 units available! Knjdpfxezi H Tto Apmsa

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 3,079 h, load capacity: 2,500 kg, fuel type: electric, drive type: Elektro, Reach truck Knedpfxszi H Tms Apmsa Condition: Ready for operation and fully functional Technical condition: good Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Description: We have 20 units in stock.

Condition: like new (used), Tool measuring stand for measuring tool radius and height. Measurements can be read of digital read-outs. Technical details Tool diameter min - 100mm Tool diameter max - 300mm Tool length maximum - 330mm 220v - 50hz Weight - 180 kg Supplied with operating instructions. Knsdpfxsyl Rnbe Apmja

Condition: like new (used), Year of construction: 2024, overall weight: 140 kg, total length: 1,200 mm, total height: 2,000 mm, total width: 600 mm, Control cabinet, switchgear cabinet, expansion cabinet, server cabinet, system cabinet, expansion system. Brand: Rittal Model: VX25 / VX Y352.222 Knjdpfxjzfhh Ro Apmja Rittal two-door cabinet with integrated lighting cabinet dimensions: 1200 x 600 x h-2000 weight - 140 kg Cabinet is like new / never used.

Condition: like new (used), Year of construction: 2023, overall weight: 100 kg, total length: 1,200 mm, total height: 1,800 mm, total width: 600 mm, Control cabinet, switchgear panel, expansion control cabinet, server cabinet, system cabinet, expansion system. Brand: Rittal Model: VX25 / VX 8286.000 Two-door cabinet Cabinet dimensions: 1200 x 600 x H-1800 Kjdpfx Apozfhggemjna Weight: 100 kg Cabinet is like new / never used.

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. Knodpfx Aozdtflopmja In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here, we offer a Pfeiffer vacuum pump station. Pfeiffer vacuum pump WKP 500 A Model PP W31 928 / X 2161 n: 2800 1/min Oil: P 3 1.5 l Knsdpfx Apszdqr Nsmea S(N2): Theoretical 500 m³/h Weight: 125 kg Motor type: EELQ-8T Oerlikon Leybold SCROLLVAC SC 60 D Ultimate pressure: 0.01 mbar Motor: 3-phase, 200/400 V, 50/60 Hz Pumping speed (50 Hz): 52 m³/h Pumping speed (60 Hz): 62 m³/h Oil-free High effective pumping capacity Low ultimate pressure Low-vibration operation Type: WOD 410 B Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, SAF Seam Welder arm approx 4.3 m long. with SAF Nertamatic 300 TR Control, plasma TIG . Knodpszh Rdysfx Apmja

Condition: used, Year of construction: 2008, throat depth: 680 mm, nominal power at 50% duty cycle: 45 kVA, input voltage: 400 V, Combined roll seam and spot welding machine, type UN63 - Roll seam welding - Rated voltage 400V/50Hz - Rated power 45kVA - Welding current 15kA - Fuse rating 125A - Outreach 670mm - Arm spacing 350mm - Electrode force 500daN Kjdpozh Izcofx Apmena - Stroke approx. 30mm - Control unit TE500 with 99 welding programs, parameters for each program, digital current display after each weld, current monitoring, stepper function - Language selection: German, English, Italian, French, etc. with operating manual - 2-stage foot switch according to UVV standards - Main machine switch - Pneumatic maintenance unit - Weight approx. 680kg - Documentation with wiring diagram, compressed air diagram, and cooling water circuit - VAT can be shown separately - Spot welding fixture / electrode holder and lower arm available at an additional cost The system is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment. On-site commissioning is subject to a fee, billed based on actual effort.

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Ksdpfxowhdnho Apmsna Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: used, Year of construction: 1993, plate thickness max. 3 mm distance betw. rolls 125 mm throat max. 500 mm weight ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Working depth: 450 mm Manual adjustment of the upper roller Roller center distance: 125 mm Continuously variable working speed: 3–15 m/min Knodpjy Iha Usfx Apmsa Stop skirt incl. 1 pair of rolls Forward/reverse operation via foot switch

Condition: used, TH6D-150-CFAC-AB, Scansonic Optical Seam Guide Model: TH6D-150-CFAC-AB Condition: Used Kjdoquqqmjpfx Apmona

Year of construction: 1987, condition: used, 13-Stand Rebar / Bar Mill - 100.000 Ton/year New: Shutdown: 2003 Manufacturer: Configuration: 1987, upgrades in the late 1990's, early 2000's Billet: Products: Rebar: Rounds: Square: Hex: Flats: Angles: Controls: Drives: Schloemann, Hille Engineering, ABB, Ajax Semi-continuous, Reversing Roughing Stand plus 12 Continuous Finishing Mill 4" - 5" (102 - 127 mm) .5" - 1.2" (12.7 - 30 mm) .5" - 2.5" (12.7 - 63.5 mm) .625" - 2" (15.9 - 50.8 mm) .625" - 1.8" (15.9 - 45.7 mm) .25" x 1.5" - 1" x 4" (6.4 x 38.1 - 25.4 x 102 mm) 1" x 1" x .125" - 3" x 3" x .375" (25.4 x 25.4 x 9.5 - 76.2 x 76.2 x 9.5 mm) ABB master reference speed control system for tension free rolling Solid State ABB. Most motors and drives were replaced in 2000. Stand Number Type Roll Diameter Roll Width Motor 1 Horizontal 14.75" 20" 500 HP 2 Horizontal 14.75" 20" 500 HP 3 Horizontal 15.25" 20" 500 HP 4 Vertical 15.25" 20" 350 HP 5 Horizontal 15.25" 20" 500 HP 6 H-V Convertible 13.78" 22" 500 HP 7 H-V Convertible 13.78" 22" 500 HP 8 H-V Convertible 13.78" 22" 500 HP 9 H-V Convertible 13.78" 22" 500 HP 10 H-V Convertible 13.78" 22" 500 HP 11 H-V Convertible 13.78" 22" 500 HP 12 H-V Convertible 13.78" 22" 500 HP Main Components: 1. Billet Reheating Furnace: Ajax 4 zone continuous Induction Furnace: Zone 1: 4,000 kW, 10 coils Zone 2: 3,000 kW, 12 coils Zone 3: 3,000 kW, 12 coils Zone 4: 1,000 kW, 10 coils 2. Schloemann 2 Hi Reversing Roughing Mill: Roll diameter: 26" (660 mm) Roll width: 88.5" (2,248 mm) Motor: 2,000 HP Entry and exit Roller Conveyors 3. 12-Stand Hille Engineering (UK) Continuous Mill: (3) Flying Crop and Dividing Shears Vertical Loopers in the Finishing Train4. Orbis Sizing Gauge 5. Water Quenching Line (used for sizes .75" 4. Orbis Sizing Gauge 5. Water Quenching Line (used for sizes .75" to 2.25") Knodpsyx Exisfx Apmoa 6. 120' Walking Beam Cooling Bed 7. CMI Product Saw driven by 300 HP DC Motor 8. Finishing Stand Setup Area (stands 6 to 12) 9. Spare rolls, chocks, bearing and other spares The Mills is still installed. The condition of the equipment is very goo

Condition: used, Technical details: voltage: 220 V / Hz revolution per minute: nicht bekannt U/min weight: 59 kg dimensions L x W x H: ca. 0,38 x 0,44 x 1,2 m Ksdpfxeu Ngx Do Apmona Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Grinding block mounted on stand, foot mounting possible *

Condition: used, Year of construction: 1986, Technical details: grinding wheel diameter: 200 mm voltage: 380 / 50 V / Hz revolution per minute: 3000 U/min height over floor: 1000 mm Kjdou Ngxqspfx Apmena current type: 380 V total power requirement: 0,9 (900 Watt) kW weight: 52 kg dimensions L x W x H: ca. 0,4 x 0,56 x 1,2 m Double sanding block mounted on stand currently clamped grinding wheels 2x, Ø 80x x 30mm right and Ø 160 x 30mm left Handrail, movable Grinding guard Holder for cooling water tank *

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220-380 - 50 V / Hz revolution per minute: 2750 U/min total power requirement: 900 Watt weight: 87 kg dimensions L x W x H: 0,32 x 0,56 x 1,0 m Knjdpfxou Ngwmo Apmea Double sanding block with handrail, adjustable no grinding protection guard Use max. sanding discs Ø 200mm max. sanding disc thickness 32mm Grinding wheels currently clamped: left = Ø 180 x 24mm and right = Ø 150 x 31mm *

Condition: used, Technical details: grinding wheel diameter: 200 mm revolution per minute: 2750 U/min total power requirement: 700 Watt Kjdpsu Ngvijfx Apmsna current: 220 / 380 A weight: 70 kg dimensions L x W x H: 0,4 x 0,46 x 1,22 m Double sanding block, table-top unit mounted on stand with handrail on both sides, adjustable/swiveling Sanding guard on both sides Use max. sanding discs Ø 200mm max. sanding disc thickness 30mm sanding disc currently clamped on sanding block: left=Ø 160 x 30mm and right=Ø 160 x 22.5mm Connections for dust extraction on both sides Ø 35mm *

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220 380 V / Hz revolution per minute: 3000 U/min total power requirement: 900 Watt weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 Kjdou Ngu Sopfx Apmona *

Condition: used, Year of construction: 1977, Technical details: grinding wheel diameter: 200 mm revolution per minute: 3000 U/min with handrail: verschiebbar 30mm current type: 220V / 380V total power requirement: 900 Watt weight: 149 kg dimensions L x W x H: 0,4 x 0,5 x 1,2 m Knsdpfx Apeu Nguxemoa Double grinding block Main switch - On/off switch Connection for dust extraction Currently attached grinding wheels: Ø 140 x 25 and Ø 150 x 25 mm *

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS AURA semiautomatic horizontal dry seaming machine Max. length per workcycle: 2.700 mm (open Sides) Glas-Thickness: 4-19 mm Knjdpfjza Eh Ejx Apmoa Stand-Alone or integrated to a cutting table Very easy operation with nearly no maintainance.

Condition: as good as new (ex-display), We are offering you a second-quality post protector from the manufacturer SSI Schäfer for sale. The scope of delivery includes: 01x Post protector, second quality Material color: yellow Design: V Overall height: approx. 750 mm Overall width: approx. 124 mm Kedpohr U Trefx Apmjna Internal width: approx. 116 mm Overall depth: approx. 65 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 4 mm Grid/hole spacing: approx. 300 mm Number of holes: 06 pcs. (03 pcs./side) Hole diameter: approx. 9 mm 06x Hex head screw: M8 x 35 mm 06x Lock nut: M8 06x Washers: M8 General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x stand protection, used Manufacturer: Meta (Thyssen) Material color: orange Total height: approx. 1,255 mm Total width: approx. 105 mm Inner width: approx. 86 mm Suitable for frame profile: 85 mm Material thickness: approx. 4.0 mm Total depth: approx. 60 mm Deflector height: approx. 50 mm Leg dimensions: approx. 75 x 75 mm Original clip tabs Weight | piece: 12.51 kg. Your contact person in our company: Mr.: Andre Evering Kjdpfx Apov Du Uxsmsna Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.