Used Stack Cutter for sale (6,251)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 6998, center height: 305 mm, workpiece diameter (max.): 400 mm, workpiece length (max.): 1,600 mm, Tool grinding machine with automation! Lhjdpoxqqu Rofx Ab Uon TECHNICAL DETAILS Maximum machining diameter: approx. 400 mm Maximum center height: approx. 305 mm Maximum machining length: approx. 400–1,600 mm MACHINE DETAILS Electrical Data Connection voltage: 3x400 VAC Mains frequency: 50 Hz Nominal current: 81 A Control voltage: 230 VAC / 24 VDC EQUIPMENT Multi-wheel configuration with 2–4 grinding wheels (wheel diameters 610/760 mm or 400/500 mm) Monolithic cast iron machine bed Coolant channels for thermal stability and vibration damping Automation: Promot Automation EPL Workpiece types: shafts, bearings, spindles, polygonal/non-round workpieces

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Lsdju Snwmopfx Ab Uehn Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: excellent (used), Year of construction: 2007, Type: KUX750VAC Serial number: 12110 Lhsdpfx Abew Rfais Uon Year of construction: 2007 Bowl capacity: 750 litres Knife speed: variable, 60 - 3300 RPM Mixing speed: 150 RPM Bowl speed: 4, 7, 10, 14 RPM Power: 3 x 380V, 50Hz, 273kW Compressed air: 6 - 10 Bar Water: 2 - 6 Bar Dimensions: 4330 x 3700 x 3050 mm (open lid) Weight: 7900 kg With double lifter for 200L tote bins and unloader

Condition: used, Year of construction: 2010, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: E1053A0011, overall weight: 850 kg, total height: 1,940 mm, total length: 1,700 mm, total width: 950 mm, Specification: Ledowq Rhmjpfx Ab Uohn Protection rating: IP54 Power: 16kW/17 kVA 24A at 400V Frequency: 50-60 Hz Supply voltage: 380V (-10%) to 460V (+10%) The Trumpf Laser TruDisk 2602 is a powerful and robust laser system, ideally suited for demanding industrial applications. With its high precision and efficiency, it enables fast and high-quality cutting processes with various materials. The compact design ensures easy integration into existing production lines, while the innovative technology guarantees stable and long-lasting performance.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Schneeberger Aries ENP4 CNC Precision Tool Grinding Machine Tool and Cutter Grinder Manufacturer: Schneeberger Model: Aries ENP4 Control unit: GE Fanuc Power Mate, 2 CNC axes, simultaneous interpolation 10.4″ LCD color touchscreen, RS232 Year of manufacture: 10/2008 Machine table: Length: 1000 mm, Width: 310 mm Grinding head, grinding spindle (motorized swivel): Drive spindle power: 7.5 kW Speed: 0 to 9,000 rpm Power: 15 kVA / 11 kW Rated current: 16 A Axes: Longitudinal travel X mm: 400 (CNC) Cross travel Y mm: 220 (CNC) Vertical travel Z mm: 295 (CNC) Resolution: 0.001 mm Workpiece rotation A: degrees free (CNC) C axis, swivel angle: +50° / -270° Position display integrated in the control unit. Measuring system resolution: 0.001° Centre height: 210 mm Accessories: ILT Unifil filter unit Tool holder Grinding wheel Note: Ideal for toolmaking and re-sharpening Optimal grinder for slots, peripheral-, flank-, face-, back- and side-surfaces Weight: 2,500 kg Required space (L x W x H): approx. 2.3 m x 2.3 m x 2.3 m Complete documentation available. Inspection under power possible at short notice. If you have further questions, we are happy to assist. Price ex stock here, plus VAT. Condition: good – ready for demonstration Lhsdpfx Abow Dvwge Usn

Condition: new, Year of construction: 2025, feed length X-axis: 310 mm, feed length Y-axis: 170 mm, feed length Z-axis: 340 mm, travel distance X-axis: 310 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 55 rpm, Macmon M100 NC with Heidenhain TNC 128 Year of manufacture: 2025 The machine is new and can be inspected at any time. The Macmon M100 NC is a compact universal milling machine designed for precise machining tasks in workshops, training environments, and small batch production. Its robust cast construction and backlash-free guideways ensure high accuracy and repeatability. Equipped with the Heidenhain TNC 128 control system, the machine allows for both conventional manual operation and NC-controlled machining. The cross axis (Y) is fully controlled, while the longitudinal (X) and vertical (Z) axes can be operated either manually or automatically. Technical data: Lhsdpfjxqh Hdox Ab Ujn Control: Heidenhain TNC 128 Travel ranges: Manual operation: X = 310 mm / Y = 170 mm / Z = 305 mm NC-controlled: X = 300 mm / Y = 165 mm / Z = 300 mm Controlled axis: Cross axis (Y) Milling head: swivels 0–90° Drive: infinitely variable Operating modes: Manual and NC operation can be combined Equipment: Coolant system, work lamp, machine cabinet Condition: New (Year of manufacture 2025) Immediately available Can be inspected under power at any time

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 956.71.80.288, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, controller model: HEIDENHAIN TNC 150, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a site closure. Placing a bid constitutes a binding commitment to collect the item on time between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Travel X-axis: approx. 300 mm Travel Y-axis: approx. 300 mm Travel Z-axis: approx. 300 mm Lhsdpexqg Itsfx Ab Ujn Tool holder: SK 40 Table dimensions: 1,000 x 500 mm, with 7 T-slots MACHINE DETAILS Control: HEIDENHAIN TNC 150 Electrical Data Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Connection: 10.5 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,400 x 2,200 mm Weight: 2,000 kg EQUIPMENT Documentation Collets Gauge block set

Condition: good (used), Thickness gauge, coating thickness gauge, Cross Hatch Cutter -Manufacturer: Elcometer, cross-cut device with case -Type: Elcometer 107 -Material: stainless steel / aluminum -Accessories: see photos Ljdjr H Nlhspfx Ab Uehn -Dimensions: 300/270/H75mm -Weight: 1.1 kg

Condition: good (used), Year of construction: 2005, max. size 74 x 105 cm age 2005 die cutter computer control with touch screen max. 9.000 cycles / h (off-load) Centerline stream feeder 1 sidelay - adjustable for pull or push operation 2 closing frames fine adjustment system Ljdpfxowvu A Ss Ab Uohn stripping station 2 set frame for stripping tools machine approx. 30 cm raised

Condition: used, Technical details: grinding length: 450 mm centre height over plate: 120 mm grinding width: 200 mm grinding spindle - swivable: 350 ° grinding head adjustable: 15° re/li ° grinding head adjustable: vertical: 250 mm adjustment of spindle-head: quer/transversal 230 mm spindle revolutions per minute : 2200/3500/5200 U/min work table:: B x L: 120 x 950 mm table movement: quer: 220 mm table movement: längs/longitudinal=500mm mm table adjustment: 5° / 45° rechts / links ° dimensions of grinding wheel: Ø 120x15 mm dimensions of hydaulic: 0,6x0,5x0,9 mm total power requirement: 1,8 kW weight of the machine ca.: 1,2 t dimension machine xH: 1,6 x 1,2 x 1,6 m dimensions of hydaulic: 600 x 550 x 820 mm Lhodpfx Abju Ng Ife Usn The tool grinding machine is currently re-equipped as a surface grinding machine. with Orsta hydraulic power unit with dust extraction and various accessories i.D. *

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Walter Helitronic CNC tool grinding machine Grinding profile machine Manufacturer [manufacturer]: Walter Type [ type]: Helitronic Steuerung [control unit]: HMC 500 (Bosch Intramad controller) Incl. handwheel Year of construction: 10/2001 Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle: swiveling +-90˚ Ljdsu Rqw Tjpfx Ab Ushn Feed speed: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force: 10,000-15000N Grinding spindle motor power: 24 kW Tool holder: SK 50 according to DIN2080 Weight: 7,000kg Space required [needed space ]approx. (W x D x H): 3.0m x 2.25m x 2.85m Incl. various accessories as per photos Complete documentation is available. Viewing under power can take place at short notice. For further questions please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: used, Year of construction: 2000, Board cutter Kolbus PK 170 Year: 2000 For cutting board sheets into finished cut-to-size blanks in 2 operating processes. Description: Lhodsxp Np Repfx Ab Usn - Hand feeding - Magazin for second cut (strips) - Circular knives, 8 - Belt delivery - Waste removal conveyor

Year of construction: 2024, condition: used, Serial number: 20240065xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21580 Specifications: 2024 model Only 10 hours, according to owner Weight: 745 kg Max pressure: 250 bar Ljdpexp Avwofx Ab Uehn 60-mount Forestry mulcher / heavy-duty crusher Own weight: 745 Model: 100-FHM-1050 Skogsfreser

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Lhsdpfx Abevvi Iqo Usn

Condition: good (used), Year of construction: 2006, functionality: fully functional, max. size 75 x 105 cm age 2006 Lsdpfxjwc Uzzo Ab Uohn die cutter computer control with touch screen max. 7.500 sheets / h (off-load) corrugated board up to approx. 4 mm 2 sidelays - adjustable for pull or push operation 2 closing frames 2 set frame for stripping tools Nonstop device in feeder and delivery shown totalizer: approx. 28 mill. impressions operating hours 21.400 Delivery time: immediately

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm Lodeu Ng Npopfx Ab Ujhn total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: good (used), Year of construction: 1987, functionality: limited functionality, Universal tool milling machine Deckel Maho FP 4 A Manufacturer: Deckel Maho DMG Type: FP4A Ljdevmq U Topfx Ab Ujhn Control unit: Heidenhain TNC 355 Incl. handwheel Travel paths x-path 485mm y-path 385mm z-path 380mm Table surface approx. 800 x 460mm Speed range - milling 63 - 3,150 rpm Drive power - milling spindle 4.4 kW Tool holder SK 40 Machine weight approx. 1.8 t Space requirement approx. 2.0 x 3.0 x 2.0 m Accessories Chip tray Coolant system Rubber mats The price is net. Legal. VAT 19% is added. We are happy to answer any further questions you may have. Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please ask. We look forward to hearing from you.

Condition: reconditioned (used), Deckel FP1 AKTIV (3-Axis Active) Machine No. 2102-5745 Year of manufacture: approx. 1988 Travel distances: X-axis: 300 mm Y-axis: 150 mm Z-axis: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Lsdpsxpwfgsfx Ab Uohn Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - HEIDENHAIN 3-axis active digital readout, type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and extends horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Centralized lubrication Space requirements (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry measurement videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring length 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Centralized lubrication checked - Heidenhain digital readout overhauled - New wiper set installed - LEDs in the Active display replaced - Oil changed - Vertical milling head fitted with new bearings - Oil sight glass replaced Net price, ex stock, free loaded

Condition: good (used), Year of construction: 2017, Used plasma cutting machine with latest Hypertherm 300 amp power source Type: PL C 2060 Ljdjxphzrepfx Ab Uehn Table dimensions: 2000 x 6000 mm Hypertherm XPR 300 source with Optimix console (for cutting stainless steel and aluminium) Year of manufacture: 2017

Condition: used, functionality: fully functional, x-axis travel: 400 mm y-axis travel: 220 mm z-axis travel: 400 mm Speed range: 40 - 2000 rpm Speed steps: 18 Internal taper: SK40 Spindle head movement automatic/manual: 190 / 200 mm Lsdpfx Aboxphn Ee Ushn Clamping surface (table): 730 x 240 mm Table longitudinal travel automatic/manual: 390 / 400 mm Table vertical travel automatic/manual: 390 / 400 mm Feed range: 8 - 400 mm/min Rapid traverse: 1200 mm/min Electronic digital display SONY Rotary table Sheet steel cabinet with 5 drawers and various machine accessories, e.g. various spare parts, tool holders, milling cutters, exchangeable table

Condition: good (used), Year of construction: 2017, Falcon FXA 3000 Year of build 2017 Working range x 3000mm Working range y 1830mm Cutting speed 0.05-8m/min Table size l 2000mm Table size w 4000mm Lodjxqqhqjpfx Ab Ujhn Dimension l 4000mm Dimension w 3400mm Dimension h 1900mm

Year of construction: 2012, condition: used, Technical details: Number of working hours: ca. 700 h number: Rotormesserhalter: 5 number: Stattormesserhalter: 4 Rotor-Ø: 440 mm material: PET control voltage: 24 VDC kW Cutting mill (shredder) The plastic granulator is intended for industrial use. Application: Size reduction of all kinds of plastics, such as ABS, POM, PA6, PE, PP, PG and PET Plant consists of a granulator with belts and a bottle bunker. Material is fed into the bunker via feeding belt Hopper 20M2 V2A complete with gear motor 7,5 kW, The screw conveyor is activated by the control system of the granulator. Bucket volume approx. 20 m³, HxWxD: 4400x3300x3300mm, weight approx. 27,0 to, Bunker with discharge unit CentriCut 44SR granulator 55 kW, granulator 55 kW (50Hz, 400Volt) and feed screw 55 kW (50Hz, 400Volt) Grinding chamber: rotor knife length 272mm, weight approx. 2.0 to Conveyor belt NT9, belt length 3500mm, useful belt width 416mm, (guide profile height 60mm, driving bar height 60mm, driving bar distance approx. 500mm) total length 3550mm, total width 780mm, total height 2350mm, weight 250kg Sound insulation LxWxH: 2700x2300x2500mm, weight 1,3 to Lodpfsu Nw Ebox Ab Uohn Tunnel detector 600 is integrated into the CentriCut cutting mill on the control side, scanning side 600mm, passage width 840mm, passage height 400mm, weight approx. 150kg The plant is ready for transport and for sale. i.D. *

Condition: good (used), Year of construction: 1992, Reinecker Universal Tool Grinding Machine WZS-50 CNC Precision Grinding Machine Profile Grinding Machine Manufacturer: Reinecker Type: WZS-50 CNC Control Unit: Siemens Sinumerik 880G Year of Construction: 10/1992 Including extinguishing system Including various accessories Travel axes: X – Y – Z – C – E Interface Type: E32R Weight: 3000 kg Space required approx. (L x D x H): 3 m x 3 m x 3 m Complete documentation is available. Inspection under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex-stock, plus VAT. Condition: good - ready for demonstration Delivery: ex-stock - as seen Payment: net - upon receipt of invoice Subject to prior sale, errors excepted. We welcome your order. Additional machines and systems are available from stock – please inquire. We look forward to hearing from you. Lodpfxewhqu Ue Ab Ujhn

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Accessories: Lhodpfxjvfdats Ab Usn - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: reconditioned (used), Universal tool milling machine Manufacturer: Harich (DECKEL) Ledpfxsdvdc Ij Ab Ujhn Model: A (FP 1) Refurbished with CE certification Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored protective cover on the vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons - New documentation for machine and control cabinet - CE declaration of conformity