Used Splash Guard for sale (3,700)

Condition: reconditioned (used), operating hours: 735 h, functionality: fully functional, working width: 650 mm, area performance: 4,200 m²/h, overall weight: 716 kg, warranty duration: 12 months, water tank capacity: 106 l, HAKO HAKOMATIC B650 R TB650 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Machine has 735 hours of operation. 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for operation on any surface. New squeegee rubbers made of natural rubber. Built-in battery charger for easy daily use. New protective rubbers around the brush head prevent water from splashing outside the machine's outline. The device is equipped with new, durable drain hoses and a suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction width (mm): 860 Theoretical capacity (m²/h): 4200 Working speed (km/h): 6.5 Tank capacity (clean/dirty water) (l): 105/105 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to work (kg): 716 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (x2) NEW drain hoses (x2) NEW hose Suction head NEW head guards (x2) Built-in battery charger Squeegee with new guards Nsdpfx Adsx Tgw Nj Nocl Tenzi Normal 5L fluid - FREE KEY FEATURES: The 105-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface. The large working width (650 mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 1,161 h, functionality: fully functional, working width: 750 mm, area performance: 4,800 m²/h, overall weight: 730 kg, warranty duration: 12 months, water tank capacity: 120 l, HAKO SCRUBMASTER B120 R TB750 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2019 with 1,161 hours on the clock 750mm cleaning head (TB750) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. Nsdpfxex Tgixo Ad Nocl A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 750 Suction width (mm): 950 Theoretical capacity (m²/h): 4800 Clean/dirty water tank capacity (l): 120/120 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 730 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 380mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 120-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (750mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Center height 210 mm Swing diameter over bed: 420 mm Swing diameter in bed bridge: 580 mm Swing diameter over cross slide: 250 mm Center distance: 1000 mm Spindle nose: D1-6 Speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Feed length: 0.05 – 1.7 mm/revolution (17 steps) Cross feed: 0.025 – 0.85 mm/revolution (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth: 2 – 72 TPI (45 degrees) Module thread 0.3 – 3.5 MP, (18 steps) Tailstock sleeve diameter D50 mm Tailstock sleeve travel 120 mm Tailstock taper MT4 Power 3.3 kW/400 V Machine weight 1270 kg Dimensions (L x W x D): 1940 x 850 x 1320 mm Accessories - 3-axis digital measuring system - Steady rest - Traveling steady rest - 3-jaw chuck mounted, D200 mm - 4-jaw chuck D250 mm - Chuck guard with safety switch - Rear splash guard - Tailstock - Cooling water system - Chip tray - Tool holder guard - Longitudinal travel stop - Halogen work light - Emergency stop button Njdpfx Adex Rt Euj Nocl - CE marking - Machine documentation The machine is a brand new showroom model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Condition: used, Year of construction: 2002, Technical details: Nedpfxju Iddns Ad Nscl x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: excellent (used), mileage: 823,883 km, first registration: 08/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,860 mm, total width: 2,550 mm, Year of construction: 2012, Equipment: AdBlue, air conditioning, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, soot filter, spoiler, - Aluminum fuel tank - Leaf suspension - Roof spoiler - EPS (Electronic Stability Program) - Particulate filter - Radio/CD player - Sleeper cab - Side door - Auxiliary heater (parking heater) - Toolbox Njdpfx Aexhcvbjd Nscl Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Front axle: Steering; Suspension: leaf spring Rear axle: Suspension: air suspension Weights Unladen weight: 7,554 kg Payload: 11,446 kg Gross vehicle weight (GVW): 19,000 kg Condition Technical condition: very good Optical condition: very good Further Information Contact Emad Al Shogran for more information. Vehicle number: 48 Mercedes Benz Actros 1842 StreamSpace 2.30 / Euro 6 VIN: WDB9634031L658033 Suspension: leaf / air Transmission: automatic Air conditioning Engine brake Cruise control Auxiliary heater (parking heater) Navigation system Distance warning assistant Lane keeping assistant Emission standard EURO 6 Special equipment: Axle load measuring device, alarm system, LED ambient lighting, audio navigation system Bluetooth Comfort, air horns (2) on cab roof, cab: Style-Line interior, cab: with air suspension, suspension: front springs 7.5 t, 2-leaf, tinted windscreen, fuel tank: 630 l aluminum, cooler / refrigerator, light and rain sensor, air intake behind cab, roof and side airflow deflectors (lockable), mounting plate / fifth wheel plate 12 mm for fifth wheel coupling, programmable special module, tire pressure monitoring system, electric sliding/tilting sunroof (glass), drawers under dashboard, circuit breaker, seats in cab: passenger seat with armrest, seats in cab: comfort driver suspension seat, exterior sun visor, roller sunblind for side window, driver’s door, steel wheels 11.75x22.5 (on front axle), additional 12V socket, additional 24V socket in passenger footwell, carpet covering on engine tunnel, preparation/switch for lift axle on trailer/semitrailer, Fleetboard preparation Additional features: Emission standard EURO 6, axle configuration: 4x2, front axle load 7.5 t, Actros 4, trailer socket 24V / 15-pin, work light, exhaust to right outside, exterior mirrors electrically adjustable and heated, rear axle differential lock, steel air tank, medium air system unit, cab: width 2.30 m, cab: L StreamSpace, cab floor with 170 mm engine tunnel, suspension: leaf / air, front spring bracket aluminum, electric window regulators, generator 100 A, transmission 12-speed – type: G 281-12, urea tank (AdBlue): 60 l, rear axle crown gear 440, body/superstructure: tractor, lower comfort bunk, central locking system, communication interface, 3-piece fender, radiator grille, regulated power steering pump, two-stage air compressor, engine 12.8 l – 310 kW R6 diesel (OM 471), engine brake, engine compartment encapsulation, wheelbase 3700 mm, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, seat trim/upholstery: fabric, seats in cab: passenger function seat, seats in cab: folding backrest driver seat, voltage converter 24V / 12V 10 A, front splash guards, front axle stabilizer, left external storage compartment, 24V cab socket, tachograph / EC recording equipment, cab door extension, aerodynamically shaped underbody paneling, front underrun protection, CB radio preparation, toll collection preparation...

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #401 Mercedes-Benz Arocs 3251 8x4 | KROLL ADR Combi K 1.0–18.0/28PE | NEW This Mercedes-Benz Arocs 3251 8x4 with KROLL ADR combined jetting and suction pressure tank superstructure is a NEW vehicle featuring maximum performance and complete ADR equipment. Equipped with a VacuStar WR 3100, Uraca KD 718, large hose storage cassette, telescopic boom, and extensive special features, it is immediately ready for demanding sewer, industrial, and hazardous goods operations. -- Superstructure -- • Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH • ADR Combi K 1.0–18.0 / 28 PE • Tank volume: 18,000 l • Service water compartment: 1,000 l (for vacuum pump) • Telescopic piston with 3 locking positions • Suction from open water sources possible (“comfort version”) • ADR equipment, type class AT/FL • Emptying via pneumatically operated piston • Sludge water drain DN80 for discharge back into the sewer via the boom -- Vacuum System -- • CVS VacuStar WR 3100 • ca. 3,100 m³/h at 200 mbar • Cooling via 1,000-l service water tank, pressureless external mounting • Approx. 20 m HD hose DN125 • Additional suction hose reel, through-feed on right rear (approx. 30 m DN80) -- High-Pressure System -- • Uraca KD 718 • approx. 315 l/min at 170 bar • Large HD hose reel for 240 m DN25, 180° swiveling • Fitted with 160 m DN25 • Small HD hose reel for 80 m DN13, hydraulic • Fitted with 80 m DN13 -- Special Features -- • Hose storage cassette with DN125 telescopic boom • Infinitely adjustable suction hose height (hydraulic, roller guide carriage) • Hydraulic, telescopic, 180° swiveling boom • ADR L4BH, incl. EX/II, EX/III and AT • Spray pistol • LED beacon lights • LED working area lighting • CAN-BUS remote control for work functions • Radio remote control with 14 functions • Warm water hand wash facility • Cabinet on driver’s side behind the pump (e.g. for work clothing) • Large cabinet rear left (e.g. for push camera) • Reverse camera • Acoustic enclosure in pump room • Water shortage warning system (with buzzer + automatic pump shutdown) • Pneumatic residual water drainage (all water-carrying parts) • Large storage compartment / equipment box • Toolbox • Traffic cone holder • Vise • Electric cable winch • Ladder • Large advertising panels right & left -- Special Equipment -- • Axle load weighing system • Digital radio DAB/DAB+ • ADR equipment package • Passenger side mirror with maneuvering position • 220 Ah battery • Interactive multimedia cockpit • 24V/100A electrical pre-installation cab • High beam assistant & cornering light • Movable cab entry • Front suspension: 9.0 t / 4-leaf • Tinted windscreen with sun filter band • ADR type FL • Speed limiter • 16-speed transmission G 280-16 • Gearbox lock • Rear axle bevel gear 300 • 3-piece fenders with splash guards • 290-litre aluminium diesel tank • Cool box / refrigerator Njdpfx Aoxc S Ayed Necl • Climate package for hot regions • Front-mounted air intake • Reinforced engine brake • Trailing axle 9 t (steerable, unloadable, liftable) • Navigation system • PTO (independent of gearbox & clutch-dependent) • Programmable special module • Wheelbase variant 3,900 mm • Frame overhang 1,200 mm • Rain sensor • Acoustic reversing warning + hazard warning light • 2 × additional keys with remote control • Circuit breaker • Velvet seats, driver/co-driver • Comfort swi...

Condition: new, Year of construction: 2024, empty load weight: 178 kg, Dreipunktstreuer D301 0.3m³ Description: Spreader with three-point linkage (CAT 1) and a single spreading material chamber. The spreading material is conveyed via an auger and distributed by the patented spreading disc unit. Hydraulically driven motors, controlled by Kugelmann hydraulic block. All drives can also be operated manually in the event of control failure. Chain drive ensures high torque when starting the auger. Corrosion-resistant material combination: stainless steel subframe (VA) and plastic spreading material hopper. Support legs can be folded up towards the spreader during operation. Features: - Hydraulically driven single-chamber spreader with auger and spreading disc - Corrosion-resistant combination of stainless steel subframe and plastic hopper - Dimensions (WxDxH): 1080 x 590 x 1200 mm - Unladen weight: 178 kg - Includes apron/splash guard - Includes tarpaulin cover - Includes road lighting (compliant with StVZO) - RAL 2011 signal color Ncodpfx Ajx S Tpvjd Nel - Manual emergency operation - Foldable support legs - Low energy consumption - Operable from an oil flow rate of 15 l/min - Patented spreading disc unit - Manual adjustment of spreading pattern - Winter service marked with reflective white warning film - Can be operated without control unit (via control cabinet key on easily accessible side) - Mounting for CAT 1 Standard Equipment: - Hydraulic drive for auger and spreading disc - Stainless steel (VA) subframe with RAL 2011 signal paint - Stainless steel spreading disc - Plastic spreading hopper - Plastic spreading disc guard - Mesh tarpaulin cover - Apron - LED lighting in accordance with StVZO - Foldable support legs (remain on device during use) - Manual adjustment of spreading pattern - Winter service marking - Operation possible without control unit - All drives are regulated and equipped with manual emergency operation - Hydraulic hoses with SVK couplings for forward and return - Spreader is fully storable (can be set down) Carrier Vehicle Requirements: - min. 20 L/min at reduced spreading output - max. 50 L/min with external oil cooler - Kugelmann system internally rated at 230 bar - Carrier vehicle with mounted spreader must not exceed permissible axle load or gross vehicle weight Optional Equipment: - k-basic 2 control unit - Wiring harness (flying) - Microprocessor control with CAN-BUS technology - Closed loop control of all drives (with feedback) - Functions: > Adjust spreading width > Adjust spreading density > Rotating beacon on/off > Work light on/off > Spreader operating/pause > Illuminated keys and rotary controls > Data recording > Speed simulation > x2 key for travel-dependent spreading (compatible with k-basic 2) - Option: Travel-dependent spreading incl. start/stop function – driving signal required - LED work light 12V Storage location: not specified

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 01/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 3,000 mm, loading space width: 2,100 mm, loading space height: 1,370 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Are you looking for a different model, engine option, dimensions, or other configurations? Please feel free to contact us. We offer financing and leasing at attractive rates—including for the Netherlands, Austria, and start-ups! ----Vehicle Specification: * Wheelbase: 3450 mm * Automatic transmission * Single cab * Twin rear wheels (rear axle) * Gross vehicle weight: 7.2 tons * Digital tachograph 4.1 * Speed limiter: 90 km/h Interior: * Cab rear wall with window * Luxury driver’s seat, air-suspended and heated * Grab handle on A-pillar * Comfort headrests * Leather multifunction steering wheel * Fabric seat covers * Alexa voice assistant Safety & Assistance Systems: * ESP stability control system * AEBS + City Brake * Driver and passenger airbags * Sump guard * ECO mode * Proximity monitoring (MOIS) * Operational & maintenance instructions electronically * Electronic manual * Rear parking sensors * Active lane-keeping assistant (ELK) with lane monitoring * Traction Plus with hill descent control * Additional speed limiter * Driver drowsiness alert (DDAW) * Right-turn assistant (BSIS) * Accident data recorder * Blind spot radar behind the cab * Traffic sign recognition (ISA) * Spare wheel with end-of-frame mounting Wheels & Technology: * Heated crankcase ventilation * Electrically adjustable and heated mirrors * MY Iveco Infotainment 10” with navigation * Apple CarPlay/Android Auto * USB ports on both driver and passenger sides * Parabolic springs with auxiliary springs (rear axle) * Manual handbrake, centrally located * Automatic climate control (A/C) * Heated fuel filter * Keyless Entry & GO * Light and rain sensor * Fog lights * Full-LED headlights * Daytime running light mode * 4G connectivity box incl. TCO * Adaptive cruise control (ACC) * Toll system prep (OBU) * Central locking with remote * 20L AdBlue tank with driver access Ncodpfex S S Rlox Ad Njl * 90L integrated fuel tank * 12V 105 Ah (AGM) battery Tipper Body: * Smooth steel bed * Removable aluminum side panels * Removable aluminum mesh sides * Large storage box * Lashing rings in the bed floor * Steel cab guard with ladder rack * Side underrun protection * Mudguards with splash flaps * Side marker lights * 3.3t trailer coupling (up to 3.5t possible, tow ball, 13-pin 12V socket) Additional body options and accessories available at extra cost. ----Note: Please call before you visit so we can ensure your desired vehicle is on site. If it is not located in Wachtendonk, we can deliver it from our stock. Custom bodywork available upon request. Your vehicle partner since 1996. Call or email us—we look forward to assisting you! No liability for printing or typographical errors. Errors and interim sales excepted. Kind regards, Pimenta Automobile

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 40898, SPECIFICATION Table size 1270 x 320mm Longitudinal traverse (X axis) 750mm Cross traverse (Y axis) 400mm Vertical traverse (Z axis) 500mm Maximum table load 500Kg Quill travel 127mm Quill feeds 0.04, 0.08, 015mm/rev Quill diameter 100mm Quill taper ISO40 Spindle motor 5.6kW Spindle speeds (inf. variable) 50 – 3800rpm Spindle nose to table 100 – 600mm Spindle centre line to column 500mm Head tilt left or right 0 – 90 degrees Approximate weight 2500Kg Machine in Metric execution   MACHINE EQUIPPED WITH Heidenhain TNC 320 CNC Control Air power drawbar Power rise and fall to knee Interlocked table guard Base splash tray Coolant system Nsdpfox S Nfgex Ad Nocl Automatic Lubrication system Lighting Vice

Condition: new, Year of construction: 2014, operating hours: 3 h, functionality: fully functional, Kilia Vacuum Cutter 65 Liter – Meister Plus Factory-Refurbished in 2025 High-performance vacuum cutter for professional food processing – completely factory-refurbished in 2025. Robust stainless steel construction, designed for precise and efficient continuous operation. Features and Technical Specifications: Machine Body: Stainless steel, corrosion-resistant Bowl: Cast from solid stainless steel Safety Equipment: Safety guard to prevent injuries from cutter blades Knife Shaft Drive: - Frequency-controlled, infinitely variable - Speed range: 50 – 5,100 rpm - Reverse operation (mixing mode): 50 – 500 rpm - Drive power: 22 kW / 400 V Bowl Drive: - Infinitely variable: 7 – 20 rpm - Drive power: 1.5 kW / 400 V Knife Head: - 1 piece, complete - Including 6 S-shaped knives Vacuum System: - Including vacuum pump - Automatic pressure regulation Hydraulic System: - Hydraulic vacuum lid, stainless steel - Hydraulic knife cover, stainless steel Electrical Equipment: - Electric knife shaft brake - Electric thermometer - Counter with automatic shut-off Operation: - 10-inch touchscreen display with joysticks - Splash guard cover - Cleaning button Control Cabinet: Ncodoxg I E Eopfx Ad Njl - Separate, wall-mounted - Made of stainless steel

Condition: used, mileage: 13,000 km, power: 335 kW (455.47 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #374 Mercedes-Benz Actros 2546 L 6x2 / FFG elephant multi 11.003 MSR Water Recycling Unit Njdpfxewv Dg Hs Ad Nocl FFG Umwelttechnik, Flensburg * Tank material: S355J2+N * Combined high-pressure jetting and sludge suction vehicle with water recovery * Permissible working overpressure: -1 / 0.5 bar * Approx. 11,000 liters tank capacity (air volume) * Approx. 8,200 liters max sludge volume * Approx. 6,600 liters max water volume * Discharge via ejector piston with three piston positions * Automated piston process with closed lid * Control: FFG elephant comfort pro (CAN-Bus) * FFG elephant connect * Automatic water recovery Chassis: Mercedes-Benz Actros 2546 L 6x2 * TipMatic * 455 HP / 335 kW * EURO 6 * Fuel volume: approx. 290l * Chassis color: Novagrau * Cab color: MB 9147 Arctic White * Air conditioning * Navigation * Refrigerator * Multimedia cockpit Vacuum system: Samson TruckMaster 2500 with approx. 2,200 m3/h * Water ring pump * Low-maintenance belt drive High-pressure system: URACA P3-45 G60 * Approx. 340 l/min at 205 bar * Low-maintenance belt drive Hose reel system: FFG multifunctional boom XL * Max. reach approx. 6,200 mm (telescopic) * Hydraulically swivels approx. 200° * Parallel routing of high-pressure and suction hose * High-pressure reel on tank top for 200 m DN 25 * Hose length measuring device DN 25 * Second high-pressure reel on boom for 80 m DN 13 (hydraulic) * Suction hose reel for approx. 20 m DN 125 on tank top Special features: * Hydraulic cable winch on the boom * Tiltable scrap box * Vise * Mounting brackets * Hand wash unit, warm * 7 work lights * 4 rotating beacons and LED flashers front and rear * Reversing camera * Hose storage and closed equipment box * Heated wardrobe * Compressed air connector for bubble filling * Various brackets for tools and equipment Technical data GVW 26,000 KG * Unladen weight 18,975 KG * Length 8,990 mm * Height 3,650 mm * Width 2,550 mm Chassis – Special Equipment: Axle load – measuring device, front axle load 9.0 t, audio system: digital radio DAB / DAB+, right-side mirror with maneuvering position, 220 Ah battery, interactive multimedia cockpit, driver assistance system: high beam assistant and cornering light, spring suspension: front springs 9.0 t, 3-leaf, fire extinguisher, tinted windshield with stripe filter, vehicle without trailer brake, vehicle without trailer coupling, generator 150 A, gearbox 12-speed – type: G 330-12, transmission lock independent of gearbox, rear axle crown gear 300, 3-piece mudguards, 3-piece mudguards with splash guards, cooler / refrigerator, 2-cylinder air compressor, reinforced engine brake, steerable and liftable trailing axle 9 t, PTO independent and dependent on clutch MB 1,2, PTO MB 131-2c, parametrizable special module, frame overhang 1650 mm, rain sensor, acoustic reversing warning and warning flashers (external signal), additional key with remote control (2), circuit breaker, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat velour, cabin seats: both armrests on passenger seat, cabin seats: passenger comfort suspension seat, cabin seats: driver comfort suspension seat, external sun visor, steel wheels 11.75x22.5 (front axle), 24V / 25A socket in passenger footwell, additional 24V socket in passenger footwell, steep-shoulder rims 11.75x22.5 (on trailing axle).

Condition: used, mileage: 78,180 km, power: 221 kW (300.48 HP), first registration: 02/2017, overall weight: 27,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: air conditioning, soot filter, Mercedes-Benz 2630 ECONIC 6x2 Zoeller Medium X2i Delta, steered trailing axle Equipment - ABS - ESP - Particulate filter - Full service history - Cruise control First registration: 10.02.2017 Mileage: 78,155 km Operating hours: 7,798 h Engine power: 220 kW (299 HP) Superstructure: Zoeller Medium x2i V19B22, Type: M23 x2, 23 m3 Zoeller Delta Premium Lifter 02301 tipping system Unladen weight: 14,640 kg Gross vehicle weight: 26,000 kg Payload: 12,360 kg Front axle: air suspension Front axle load: 8.0 t Rear axle: bevel gear 300 planetary, 13.4 t Trailing axle: 7.5 t, steered, liftable Cab: 4-seater Vehicle dimensions: Length: 9.2 m, Width: 2.55 m, Height: 3.47 m German truck Axle ratio: i=6.824 Electronic brake system with ABS and ASR Electronic air supply unit, high spec Heater, electronic air supply unit Bus stop brake Condensate monitoring for compressed air system Frame overhang: 1000 mm Wheelbase: 3,900 mm Single-circuit steering Short shock absorbers, limited rebound travel Additional stabilizer rear/trailing axle Front underrun protection (ECE) steel Front splash guards (EC) Splash guard in wheel arch No rear underrun protection (ECE) Grab handles in cab Driver's air-suspended comfort seat 3 passenger seats, static, with headrests Electric window (driver's side) Air conditioning Initial parameterization PSM external PSM body and trailer CAN ISO 11992 PSM body CAN, ISO 11898 instead of 11992 Start assist speed limitation 30 km/h Emergency stop switch for ABH in console Electrical waste collection automation Electrical waste automation with neutral position Folding door passenger side Heated front mirrors Immobilizer with transponder Rain/light sensor ECO driving program for automatic transmission Automatic transmission 6/3.49-0.65, Allison 3000 P Tubeless tires 315/80 R 22.5 front/rear/trailing axle Tubeless tires 315/80 R 22.5 rear axle Axle configuration: 6x2/4 ENA 26-ton class Econic model series Air suspension, low-frame rear axle Tachograph digital, EC, RPM, ADR Tachograph manufacturer: Stoneridge CD radio, Bluetooth, comfort Axle load measurement device Trailing axle 9 t, hydraulically steered Drop center wheels Exhaust system, end pipe upwards, variable outlet On-board diagnostics, emission with NOx monitoring Extended rear light harness Rear lights for rear loader Nodexplxuepfx Ad Nocl Automatic hazard warning lights activation Preparation for rotating beacon Euro VI engine version 2 High performance engine brake Two-stage, fuel-efficient air compressor MDEG 13 Software version M 4.16.01.00 Injector OC3 ESP Lane keeping assist Active Brake Assist Speed limiter 85 km/h Vmax 30 km/h switchable, reverse lockout for refuse collection Cruise control Econic model generation 1 Superstructure type: refuse collection vehicle Weight variant: 25.7 t (7.1/11.5/7.1) Instrument/signs/manuals in German CTT conversion, stand position before band entry Plausi control code (internal) CTT vehicle MBS/MPC-Defence All details without guarantee Further information and criteria on request. Additional services: repainting and retrofitting possible Temporary/transit/export license plates Transfer and shipment available Assistance with customs and export documents Procurement of COC and EUR documents Since 1991 on the market Leasing and financing available Own workshop Trade-in possible We speak Polish.

Condition: new, functionality: fully functional, spindle bore: 21 mm, turning diameter: 180 mm, turning diameter over top slide: 110 mm, center height: 90 mm, turning length: 300 mm, total length: 800 mm, total width: 480 mm, total height: 1,260 mm, spindle speed (max.): 2,500 rpm, bed width: 100 mm, type of input current: DC, overall weight: 65 kg, quill mount: MK 3, three-jaw chuck diameter: 100 mm, Equipment: rotational speed infinitely variable, WM180V - ROGI Vario Metal Lathe 230V-1Phase Swing over bed: 180 mm Swing over cross slide: 110 mm Centre height: 90 mm Distance between centres: 300 mm Bed width: 100 mm Cross slide travel: 75 mm Top slide travel: 55 mm Spindle bore: 21 mm Spindle mount: MT3 Spindle speed range: variable 50 - 2500 rpm Thread cutting Whitworth: 10 - 44 TPI (8) Thread cutting metric: 0.5 - 3 mm (10) Tailstock quill travel: 60 mm Tailstock quill diameter: 30 mm Tailstock taper: MT2 Motor power: brushless 600 Watt Weight: 60 kg STANDARD ACCESSORIES * 3-jaw chuck 100 mm - self-centering * 4-way tool holder * Drip tray * Rear splash guard * Chuck guard * Leadscrew guard * Tool post guard * Change gear set Njdpfxjga T Ebo Ad Nscl * Digital speed display * Fixed centres * Forward / Reverse switch * Toolbox with tools * UNDERCABINET OPTIONS * Independent 4-jaw chuck 100 mm * Flange for 4-jaw chuck 100 mm * Fixed steady * Travelling steady * Faceplate 170 mm * TOOA0 quick-change tool post * Turning tool set

Condition: good (used), EMCO Tool Milling Machine Type FB 3 (not a DECKEL FP 1) with 3-axis Digital Readout HEIDENHAIN Year 2007/2008 3 units available! Travel (X/Y/Z): 300 x 200 x 350 mm Spindle taper Vertical/Horizontal: SK 30 DIN 2080 Tool clamping: manual Quill stroke: 45 mm Vertical milling head swivels: +/- 90 degrees Spindle power: 1.1/1.4 kW (60/100% duty cycle) Spindle speed Vertical/Horizontal: 80 – 2,200 rpm Gear steps: 8 Fixed angle table: 600 x 200 mm Infinitely variable feed (X/Y axes): 0-550 mm/min Rapid traverse (X/Y axes): 1,200 mm/min Feed Z-axis: manual Machine dimensions (W x D x H): 1150 x 1410 x 1550 mm Nsdoxx R Itepfx Ad Necl Weight: approx. 500 kg Standard equipment: - 3-axis HEIDENHAIN digital readout - Coolant system integrated into machine base - Angle table - Manual central lubrication - Swiveling device for vertical spindle - Chip tray - Splash guard - CE compliant Key features: - HEIDENHAIN precision digital readout - Infinitely variable feed and rapid traverse in longitudinal/cross direction - Control panel with clear keypad for straightforward operation - Safety handwheels on all 3 axes - Adjustable precision tapered roller bearings - Adjustable, double-acting gib strips, hardened - Removable coolant tank Additional equipment: - SEMER brand micro-spray device connected to coolant switch/standard coolant pump Application area: Ideal for instrument and prototype construction, training, craft businesses, and advanced DIY enthusiasts Machines come from a training facility: Condition: good to very good Available from March 2026, possibly earlier by arrangement

Condition: good (used), WEILER Precision Lathe MADADOR with HEIDENHAIN 3-Axis Digital Readout Year of manufacture: approx. 1980, retrofitted with emergency stop and electrically interlocked chuck guard. Centre height: 145 mm Ncsdsxx S Hdopfx Ad Nel Centre distance: 500 mm Swing diameter over cross slide: 160 mm Spindle nose: DIN 55022 size 5 Spindle bore: 36 mm Spindle speeds: 30 – 3,000 rpm Motor power: approx. 3.0 kW Tailstock quill: MK 3 Quill travel: 90 mm Weight: approx. 620 kg Dimensions: 1420 x 700 x 1200 mm Technical data not binding! Robust lead and feed screw lathe for workshops and advanced DIY users Condition: good Equipment: - 3-axis precision digital readout HEIDENHAIN - Lever-operated quick-collet chuck system - Electrically interlocked chuck guard - Multifix tool post size A - 3-jaw chuck - Coolant system - Machine feet - Chip guard/rear splash guard - Machine lamp - Bed stop - Emergency stop button - Lockable tool compartment - Automatic feeds for longitudinal and cross slide Safety features: - Electrically interlocked chuck guard - Emergency stop button - Brake motor Available from March 2026

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Type: LZ 185 Swing diameter over bed: 365 mm, over cross slide: 225 mm Turning length: 750 mm Centre height: 185 mm Spindle bore: 40 mm Speed range: 20 – 1,600 rpm Digital display Heidenhain VRZ 773 B on 2 axes (scales on cross slide, longitudinal slide, and top slide) Dimensions: 1,900 x 900 x 1,700 mm Weight: approx. 800 kg Features: • Spindle brake operated by foot pedal • Adjustable stop on the cross slide (feed cut-off) • Splash guard Accessories included: - Operating manual Ncjdow Svtcjpfx Ad Nol - Multifix B tool holder with 2 inserts - Coolant pump integrated in machine base (no coolant hose connected) - Forkardt 3-jaw wedge bar chuck 200 mm - Albrecht drill chuck 1-13 mm Total weight approx. 950 kg Condition: Used The machine runs smoothly and can be inspected under power. All information is given without guarantee and subject to error. All dimensions are approximate. This offer is non-binding. The machine can be inspected by appointment. Subject to technical changes, errors, and prior sale! All prices are net plus VAT. Payment by advance transfer including any shipping costs within 14 days after conclusion of contract. If payment in full is not received within this period, the seller reserves the right to cancel the contract. Sale only to businesses as defined by § 14 BGB. The machine is sold excluding any warranty for material defects. This exclusion does not apply to claims for damages from liability for material defects resulting from grossly negligent or intentional breach of duty by the seller or their agents, or in the event of injury to life, body, or health. Any remaining rights against third parties for material defect liability will be assigned to the buyer. Please understand that I cannot accept liability for compliance with any locally applicable and generally required safety regulations for the sold machine and its components. Compliance with such safety regulations is the sole responsibility of the final operator. All contracts concluded with me are subject exclusively to the law of the Federal Republic of Germany, excluding the UN Convention on Contracts for the International Sale of Goods. Place of jurisdiction agreed as Mannheim.

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Possibility of 2000 and 3000 mm distance between centers. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Center height 330 mm Max. diameter over bed 660 mm Max. diameter over carriage 420 mm Max. diameter over pocket 870 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50 Hz 7.5 kW Coolant pump 400V 50 Hz 90 W Dimensions 3000 x 1400 x 1600 mm Net weight 3330 Kg Accessories included: Self-centering chuck with 3 reversible jaws Ø320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Njdpfjvbqt Sox Ad Nocl Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, Parallel lathe with display Fervi T075/400V3A. Monoblock cast iron base. Height of Centers 230 mm Max. diameter on Bench 460 mm Max. diameter on Carriage 270 mm Max. diameter on Slot 690 mm Tool Height 25 mm Distance between Centers 1500 mm Distance between Guides 300 mm Bar Taper CM MT7 Bar Passage 58 mm Spindle Attachment Camlock D1-8 Spindle Speed (12)25-1700 rpm Longitudinal Feeds (42) 0.031 - 1.7 mm/rev Cross Feeds (42) 0.014 - 0.784 mm/rev Metric Threads (41) 0.1 - 14 mm Inch Threads (60) 2 - 112 TPI Tailstock Spindle Stroke 130 mm Tailstock Taper CM MT4 Motor 400 V 50 Hz 5.5 kW Coolant Pump 400 V 50 Hz 90W Machine Dimensions 2750 x 1080 x 1370 mm Net Weight 2020 kg Total Dimensions 2870 x 1180 x 1570 mm Gross Weight 2200 kg Nedpfx Adevbqv He Nocl Accessories Included: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Drive flange Ø350 mm Fixed steady rest Moving steady rest Reduction bushing CM 7 / 4 Fixed tailstock CM 4 Rotary tailstock CM 4 Thread comparator Turret guard Spindle guard Rear splash guard Quick change turret type B LED lamp Cooling system Electromechanical foot brake Bathed carriage gears oil Quick-lock tailstock carriage

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available in stock subject to prior sale. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 385 mm Max. diameter over bed 770 mm Max. diameter over carriage 575 mm Max. diameter over pocket 1050 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Njdpovbqlhjfx Ad Necl Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1550 x 1700 mm Net weight 3250 Kg Gross weight 3250.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Nodpfovbquiex Ad Necl Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: used, Year of construction: 2001, Technical details: faceplate diameter: 2000 mm swing diameter: 2130 mm turning height: 1400 mm Ncodpfsvb A Uzsx Ad Nel ram stroke range: 1000 mm workpiece weight: 10 t faceplate turning speed range: 1 -200 U/min main drive: 60 kW total power requirement: 95 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,0 x 4,0 x 5,6 m with CNC SIEMENS 840 D C-axis driven tooling 15/22 kW automatic toolchnager 16-pockets through spindle coolant splash guarding and chip conveyor *

Condition: used, Technical details: faceplate diameter: 1600 mm swing diameter: 1800 mm turning height: 1500 mm max. ram stroke: 1200 mm faceplate turning speed range -stepless-: 2,5 - 250 U/min Nsdpfx Asv Uw Trod Nscl workpiece weight max.: 10.000 kg ram head dimension: 240 x 240 mm feed range: 1 - 3000 mm/min power capacity: 45 kW weight of the machine ca.: 20 t modernized and overhauled in 2010 with CNC SIEMENS 840 D 12 positions automatic toolchanger telescopic covers splash guarding chip conveyor coolant attachment diverse toolholders *

Condition: excellent (used), Year of construction: 2000, Stanko Universal Tool Milling Machine Model SMK 25/32 TNC355 Ncodpfsw D Hmljx Ad Nel Low hours – previously used in a school Machine No.: 55 Year of manufacture: 2000 Travel X: 400 mm, Y: 320 mm, Z: 440 mm Table size: 800 x 320 mm Spindle taper: ISO 40 Spindle speed: 40 – 2000 rpm Feed rate X, Y, Z axes: 10 – 1000 mm/min, infinitely variable Rapid traverse X, Y, Z axes: 1800 mm/min Quill stroke: 60 mm Spindle motor drive power: 3 kW Electrical connection: 380 Volt, 50 Hz Torque. Horizontal spindle: 230 Nm Vertical spindle: 82 Nm Total power: 5.87 kW Control voltage: 110 Volt Feed drive power: 2.2 kW Feed force: 7500 N Distance horizontal spindle to table clamping surface: Minimum 45 mm Maximum 595 mm Distance vertical spindle to table clamping surface: Minimum 45 mm Maximum 490 mm T-slot width: 14 H 7 mm T-slot spacing: 50 mm Number of T-slots: 5 Equipment: - CNC contouring control Heidenhain TNC 135 - 18 spindle speeds - Fixed angle table - Chip collection tray - Coolant splash guard and chip protection shield - Coolant system - Centralized lubrication - Lighting - Heidenhain control - Electromagnetic clutches for feed transmission - Hydraulic-mechanical axis clamping - Hydraulic tool clamping - Centralized lubrication for guideways and gearbox - Precision ground flat guideways Space requirement (L x W x H): 1685 x 1890 x 1890 mm Weight: 2200 kg Good condition – Ex-school machine Low hours Location: ex-stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Matador VS2 lathe, year of manufacture 1992, three-jaw chuck, Multifix, rear splash guard, electric chuck guard. The machine is in good working condition and can be demonstrated under power by appointment. Nedpfsx Sqvgsx Ad Necl

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902028370, empty load weight: 6,015 kg, maximum load weight: 28,985 kg, overall weight: 35,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2021, next inspection (TÜV): 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,030 mm, suspension: air, tire size: 435/50 R19,5", color: black, Year of construction: 2021, Equipment: EBS, Chassis Semi-Trailer for Haulage Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly sloped with "Load-Lock profile" for lashing strap attachment; if equipped, note: to hook in straps when side boards are mounted, the boards must be opened! 24 t two-speed landing gear, single-side operation, with straight lower part, without compensating slide Note: Free landing leg corner spacing or free rear swing radius approx. 1930 mm without landing legs, pull-out ladder at the rear, door holder on the side 2x wheel chocks with holder Aluminium side underrun protection Galvanized steel rear underrun protection Quarter-shell mudguards before the 1st axle and behind each axle With anti-splash mudflaps behind each axle Rear impact guard, double-sided pallet stop approx. 15-20 mm high, bolted design; loading height reduced by approx. 15-20 mm Plastic toolbox with drawer and insert shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) Axles & Suspension SAF disc brake axles Axle/chassis laser alignment for reduced tire wear and fuel consumption, air suspension, no lift axle Braking System 2-line compressed air brake system, colour-coded line routing for easy service Spring-loaded parking brake 2 unmistakably keyed coupling heads at front, no connection line EBS, Electronic Braking System with EBS socket at front, no connecting cable Ncedpfx Asx Sqmrod Nol Attention: The trailer may only be towed by towing vehicles that ensure the ABS is effective! With raise & lower valve Vehicle stability control system Wheels and Tyres 435/50 R19.5” make according to manufacturer’s choice, alternatively 385/55 R19.5 Steel rims, factory silver Electrics 24 Volt, multi-chamber lamps, yellow LED side marker illumination 2 white position lights front 2 white/red lane marker lights rear 2 x 7-pin and 1 x 15-pin unmistakably keyed sockets at front, no connecting cables Floor Birch plywood panels approx. 30 mm thick, laid on longitudinal crossbars, high point load bearing capacity for forklift axle load up to max. 7100 kg Body Body mounted Front Bulkhead / Corner Posts 2,580 mm high, steel corner posts, high-volume design, mechanism for side curtain release at front wall "Crash Blocker", lower inside approx. 140 mm high steel impact protection Intermediate Posts 3 pairs of sliding posts, adjustable along full length, with four multipocket sockets and long socket at bottom 3 pairs of post positions Insert Slats 5 rows of wooden insert slats Rear Wall / Rear Corner Posts Rear steel corner posts up to lower edge of roof, curtain attachment with round tube and tensioning ratchet Rear portal doors, double-winged, each with 2 internal rod locks Curtain Curtain with welded horizontal and vertical belts Tension locks of stainless steel Roof Sliding roof, rear lift-up, can be slid from rear to front, L-roof rail for automotive industry, interior width between roof rails approx. 2,490 mm, curtain colour: white Roof non-elastic, minimal deflection of roof rail during loading and unloading EcoLift - roof can be raised by approx. 380 mm on both sides, gas strut assisted, 3 driving positions at front: internal height front approx. 2900 mm/2950 mm/3000 mm, set to approx. 3000 mm Optimized rain gutter at rear, top of rear hoop, above doors