Used Small Part Shelf for sale (17,386)

Condition: good (used), Year of construction: 2016, 134 units, side protection / frame protection / impact protection / guardrail for pallet racking, single or double rows, Nedcon - used - : Price ex location: €95 / unit (net), dismantled, packaged and loaded! Manufacturer: Nedcon Model: Set Flank protection sigma 135deg Year of manufacture: 2016 / 2019 Type 1 (for single row): 6 units available Side protection sigma 135° L=1100mm Set Flank protection sigma 135deg L=1100 Length: 120cm Height: 40cm Depth: approx. 22cm Weight: approx. 31kg Original price: approx. €205 (net) / unit Type 2 (for double rows): 124 units available Gedoy Aixuepfx Acwsir Side protection sigma 135° L=2400mm Set Flank protection sigma 135deg L=2400 Length: 243cm Height: 40cm Depth: approx. 22cm Weight: approx. 41kg Original price: approx. €227 (net) / unit Condition: good – very good Available: immediately Location: Augsburg

Condition: used, Dimensions (LxBxH): 90 x 60 x 90 cm Price: On request - Documentation available: No - CE certificate present: No Gijdeyz Uauepfx Acwor - Transport dimensions: 900mm x 600mm x 900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2021, condition: good (used), aperture approx. 60x20 cm. With metal conveyor belt Gsdpeyzy Ikjfx Acwjir

Year of construction: 2022, operating hours: 157 h, condition: used, machine/vehicle number: 710363, Travel distances (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, BENZINGER control, KNOLL 320 S-1/225 chip conveyor, No.: 2197973, HYDAC cooling unit, DSL Sigmatec 15 compressed air filter unit, 1 side table Godpfx Asyztc Iocwoir

Condition: good (used), Technical data for the shelf panel: Gjdpsyzmn Djfx Acwoir Racking system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x shelf panel, used Material color: Sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 594 mm Height: approx. 30 mm Weight per piece: approx. 8.12 kg Max. load per shelf panel: 75 kg, with evenly distributed load. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item entails extra costs, which can be requested from us separately, depending on delivery location or scope.

Condition: used, Technical data: Number of pistons: 6 Piston diameter: 80 mm Gjdpfxsyz T Ano Acwoir Connection to central heating (CO) Shelf dimensions: 3000x1300 mm Clearance: 395 mm Hydraulic pressing 6 pneumatic side clamps Safety switch Motor power: 1.5 kW Power supply: 400 V Overall dimensions: Length: 3650 mm Width: 2100 mm Height: 2040 mm

Condition: new, Year of construction: 2026, Ultrasonic cleaning system - Ultrasonic cleaning device Purchased from insolvency assets - New, unused unit! Manufacturer: Derui Ultrasonic Device completely made of stainless steel - Bottom-mounted ultrasound, multi-frequency: switchable between 25/45 kHz, power (effective/peak): 1,600/3,200 watts - Adjustable heating up to 80°C; power: 2,500 watts - Basket dimensions (LxWxH): 530 x 400 x 300 mm - Tank dimensions (LxWxH): 550 x 420 x 320 mm - External dimensions (LxWxH): 650 x 560 x 830 mm - Device weight (empty): 115 kg - Device is mobile on castors - Incl. insulated cover - Incl. 1 stainless steel goods basket No warranty, as purchased from insolvency assets Gijdpoyz N Exsfx Acwer

Condition: new, Year of construction: 2026, Ultrasonic Cleaning System - Ultrasonic Cleaning Device Acquired from insolvency assets - new, unused unit! Manufacturer: Derui Ultrasonic Unit made entirely of stainless steel - Bottom ultrasonic system, multi-frequency: 25/45 kHz switchable, power (effective/peak): 1,000/2,000 watts - Heating adjustable up to 80°C; power: 1,500 watts - Basket dimensions (LxWxH): 400 x 350 x 280 mm - Tank dimensions (LxWxH): 420 x 370 x 300 mm - External dimensions (LxWxH): 520 x 510 x 810 mm - Weight of unit (empty): 85 kg - Unit is mobile on casters - Including insulated cover - Including 1 stainless steel goods basket No warranty, as item was purchased from insolvency assets. Giodoyz Nu Topfx Acwor

Condition: good (used), functionality: fully functional, Used professional Gummi-Mayer parts washer. The unit has barely been used and is in very good, fully functional condition. Please no email inquiries! If you have any questions, we are happy to assist you by phone. Inspection and collection only by prior telephone appointment! Subject to changes, prior sale, and errors. Gijdpfxjyz I Npo Acwer

Condition: used, Dimensions (LxBxH): 170 x 65 x 160 cm Price: On request - Details: - └ Description: Roller width 1050mm Giodpfx Acsyymxyjwjr - Documentation available: No - CE certificate present: No - Voltage [V]: 220 - Current consumption [A]: 1.5 - Transport dimensions: 1700mm x 650mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Dimensions (LxBxH): 125 x 50 x 100 cm Price: On request - Documentation available: No Gjdpfx Acjyymnuewjir - CE certificate present: No - Voltage [V]: 24 - Current consumption [A]: 5.5 - Transport dimensions: 1250mm x 500mm x 1000mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2009, condition: used, Empty weight: 150 kg Dimensions (LxBxH): 50 x 50 x 120 cm Price: On request - Year: 2009 - Documentation available: No - CE certificate present: No - Serial number: 1248S - Transport dimensions: 500mm x 500mm x 1200mm (l x w x h) - Transport weight [kg]: 150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gijdpeyymzhsfx Acwsr Yorick Diebels

Condition: used, functionality: fully functional, load capacity: 10,800 kg, load capacity per storage section: 2,790 kg, frame height: 3,750 mm, construction width: 1,000 mm, Good day, We hereby offer you, without obligation, a used pallet racking system (multi-location system) from Galler, model OMEGA. Manufacturer: Galler Lager- und Regaltechnik GmbH Model: Omega Year of manufacture: unknown Frame load capacity max. 10,800 kg Load capacity per level max. 2,790 kg Frame height: 3,750 mm Frame depth: 1,000 mm Beam length (traverse length): 3,100 and 3,400 mm Scope of delivery: - 44 uprights 3,750 x 1,000 x 100 mm (H x D x W) - 215 beams 3,100 mm - 14 beams 3,400 mm - 14 upright impact guards, long, 985 x 120 x 55 mm (L x W x H) - 10 upright impact guards, short, 500 x 120 x 50 mm (L x W x H) - 12 floor corner protectors, green, 500 x 120 mm - 13 floor corner protectors, yellow, 450 x 110 mm - 1 floor corner protector, yellow, 450 x 180 mm - 2 upright double-row impact guards, plate 300 x 250 mm, upright height 350 mm - 24 upright load distributors 1,020 x 110 x 45 mm - 60 upright bases, as new - 21 upright bases, used, good condition - 10 mesh shelves for beams, galvanized, 2,900 x 1,020 x 40 mm - 19 mesh shelves for beams, galvanized, 2,625 x 1,020 x 40 mm - Various smaller mesh shelf pieces for beams, galvanized - 1 lot of distance plates for OMEGA upright bases - 1 pallet upright connector profiles, 900 x 30 x 24 mm Note: The above technical data was taken from the operator's manual, manufacturer brochures, or other sources, for which we cannot guarantee accuracy or completeness. We would be pleased if this pallet racking system is of interest to you. Godpeyz A Sxofx Acwsir Your service team, Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, load capacity: 1,500 kg, Good day, We are pleased to offer, without obligation, a used complete pallet racking warehouse (multi-position system) from the manufacturer Galler, type OMEGA. Manufacturer: Galler Lager- und Regaltechnik GmbH Type: Omega Year of manufacture: 2021 Compartment width: 2,700 mm Compartment load: 1,500 kg Bay load: 1,500 kg Buckling length: 1,850 mm Frame height: 3,600 mm Max. run length: approx. 179 linear meters Scope of delivery: 64 upright frames 3600 x 1100 x 100 mm (H x D x W) 100 beams 2700 x 100 x 70 mm (L x H x W) 2 beams 1850 x 100 x 70 mm (L x H x W) 16 impact protection elements for a single row racking line, 1230 x 240 x 400 mm (L x W x H) Giedpjyz A Itofx Acwsr 2 impact protection elements for a double row racking line, 2600 x 240 x 400 mm (L x W x H) 22 push-through protection grid elements 3600 x 1100 x 100 mm (H x D x W) Note: The above technical data has been taken from the operating manual, manufacturer’s brochures, or other sources. We do not assume any liability for the correctness or completeness of this information. We would be pleased if this pallet racking warehouse is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 103000050, load capacity: 250 kg, Equipment: documentation/manual, The MiR250 is a more flexible AMR – compact and powerful. The MiR250 features a small footprint of just 580 x 800 mm and a height of only 30 centimeters. Despite its size, it easily transports loads of up to 250 kg and can travel at speeds of 2 meters per second. This agility sets it apart from all other AMRs on the market and makes it particularly adaptable to demanding environments. Thanks to its compact design, it can navigate spaces with a width of just 80 centimeters. This means that doors and elevators, which might pose a challenge for other mobile robots, are no obstacle for the MiR250. Gisdpoyf Etxsfx Acwer The MiR250 is engineered for durability and can operate around the clock, with a battery that can be replaced quickly. Additionally, it meets the latest safety standards – which is why we believe it is the safest AMR on the market. It has so far only been used in laboratory conditions and has virtually no operating hours. Accessories: - Cable Charger Lite 48V, 3A, wired charger - WISE WLAN EA module 4060, 4x digital inputs, 4x relay outputs

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm Gedpfefdkb Tox Acwsir - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction Gjdpfxjh R Taqe Acwjir (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) Godpfxjmhhypo Acwoir - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Gijdpfx Acjmhh Dhjwer Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard Gjdpfsmhh Dzjx Acwsir - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm Gisdpfx Acsmhh Anewjr - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Gisdpfx Acjguk A Hower Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Godpfxomhhy Nj Acwsir Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Gjdpfxjguk Dko Acwsir - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Gjdemhh Dtepfx Acweir - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.