Used Slit And Cut To Length for sale (50,915)

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted Kljdpfx Aewc Afhjp Asw 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 Klsdpfegy Da Ssx Ap Ajw -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Number: 2x milling unit available -Price per piece -Dimensions: 500/350 / H570 mm Kedpfxegy Dbhj Ap Aelw -Weight: 55 kg

Condition: used, Year of construction: 2003, pressure max. 8,24 BAR Receiver 2,8 L Temperature range max. 50°C - min. 0°C °C In our opinion, the machine is in good used condition and can be inspected under power by appointment. Kedpfxjw S Nk Ue Ap Aslw Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), functionality: fully functional, ----- Kodpoyub Eiofx Ap Aelw Pos1→ No.: 1406 *1x VDI40 → Steel holder, type C4, new condition No. C4-RC2040-51030 Weight/piece G: approx. = 4 kg Unit price net: 350 €/piece ----- New condition, various steel holders: a total of 9 holders 3x Internal turning holder → 150.00 €/piece 6x External turning holder → 150.00 €/piece ----- Turning steel holder, steel holder, turning tool, turning insert holder, tool holder, -Various types: see photos, more images available upon request -No individual sale - only the complete package is sold Shipping costs upon request

Condition: excellent (used), functionality: fully functional, Offer: Like-new turning tool holder VDI40 turning tool holder - holder shank CAPTO C4 Manufacturer: SANDVIK COROMANT Type: VDI40-CAPTO C4 Shank: Ø 40 mm ----- Consisting of: Pos. 1 → No.: 1405 = 1 x VDI40 steel holder shank C4 No. C4-RC2040-51030 Weight/piece G: approx. = 4 kg Unit price net: 325 €/piece The built-in insert holder is not included in the scope of delivery. Price inquiry separately... ----- Last image: Tool shanks - insert holders for Capto C4 available upon request. Klodpoy Apm Eofx Ap Aew The goods are in like-new, tested condition.

Condition: used, Year of construction: 1998, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, clearance between the columns: 325 mm, displacement volume: 131 cm³, injection pressure: 1,450 bar, overall weight: 4,100 kg, Equipment: documentation/manual, The machine is in working order and can be inspected during production. Kodpezd Tu Hefx Ap Aelw

Condition: good (used), Year of construction: 2008, functionality: fully functional, total length: 900 mm, total width: 660 mm, power: 0.75 kW (1.02 HP), color: light grey, belt width: 400 mm, frame height: 170 mm, Features: Condition: fully functional, with signs of use Ideal for fast material transportation Expertly dismantled and packed Belt conveyor/ conveyor belt/ belt conveyor Manufacturer: VanderLande Condition: Used Year of construction: 2008 Total length: approx. 900 mm Overall width incl. motor: approx. 660 mm Kedpferdziwsx Ap Aslw Overall width without motor: approx. 500 mm Belt width: approx. 400 mm Belt type: Longitudinal grooves and smooth Material: steel Frame height: approx. 170 mm Color: Light grey Including SEW motor (0.75 KW) In stock: 1 piece Price per piece The conveyor system has run until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We will be happy to provide you with an individual quotation or advise you on the design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of sectors, such as logistics, the pharmaceutical industry Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting technology or supplementary components such as order picking racks or containers.

Condition: good (used), Year of construction: 2008, functionality: fully functional, conveyor belt length: 1,650 mm, total length: 1,650 mm, total width: 660 mm, power: 1.1 kW (1.50 HP), Equipment: type plate available, Features: Condition: Fully functional, with signs of use Ideal for rapid material transport Professionally dismantled and packed Belt Conveyor / Conveyor Belt / Belt System Manufacturer: VanderLande Condition: Used Year of manufacture: 2008 Overall length: approx. 1650 mm Overall width incl. motor: approx. 660 mm Overall width without motor: approx. 500 mm Belt width: approx. 400 mm Belt type: Longitudinal grooves Material: Steel Frame height: approx. 170 mm Colour: Light grey Including SEW motor (1.1 kW) Stock: 37 units Price per unit The conveyor technology was operational until dismantling. Internal item number: 2026020206 Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics Kledpfxoygnuns Ap Asw Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods – we are your competent partner! We are happy to prepare your individual offer or advise you on design and installation matters. Simply let us know your requirements and site conditions. Take advantage of our many years of experience and our outstanding network of professionals. We have already successfully delivered projects for companies from a wide range of sectors, such as logistics, pharmaceutical industry, trade, or the electronics industry. Together, we will find ways to optimize your processes and material flow in a cost-effective and sustainable way. Even fully automated sorting technology or additional components such as picking shelves or bins can also be supplied.

Condition: good (used), Year of construction: 2008, functionality: fully functional, total length: 1,800 mm, total width: 660 mm, power: 1.1 kW (1.50 HP), color: light grey, belt width: 400 mm, frame height: 170 mm, Features: Condition: fully functional, with signs of use Ideal for fast material transportation Expertly dismantled and packed Belt conveyor/ conveyor belt/ belt conveyor Manufacturer: VanderLande Condition: Used Year of construction: 2008 Total length: approx. 1800 mm Overall width incl. motor: approx. 660 mm Overall width without motor: approx. 500 mm Belt width: approx. 400 mm Belt type: Longitudinal grooves Material: steel Frame height: approx. 170 mm Color: Light grey Including SEW motors: 9 pieces with 1.1 KW and 1 piece with 0.75 KW Stock: 10 pieces Price per piece The conveyor technology has run until dismantling. Klodpfjrdzlnox Ap Aew Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We will be happy to provide you with an individual quotation or advise you on the design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of sectors, such as logistics, the pharmaceutical industry Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting technology or supplementary components such as order picking racks or containers.

Condition: used, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,180 mm, travel distance Z-axis: 1,400 mm, X-MM.1600 Y-MM.1180 Z-MM.1400 B-POSI.360000 H.WORKABLE MM.1500 DIM.TABLES MM.800x1000 TABLES CAPACITY KG.2500 ROTATION TABLES 360000 POS. SPEED TABLES ROTATION RPM 14 SPINDLE MOTOR POWER.KW.37 SPINDLE SPEED. RPM.30-6000 SPINDLE TAPER ISO 50 -DIN 69871 SPINDLE SHANK ISO 7388/2 Kodpfx Apoxuvv Ie Aelw RAPID & WORK FEEDS MM/MIN.28000 CNC SIEMENS 840D AUTOM TOOL CHANGER 60 POS N.2 ROTARY TABLES N.1 HEAD OVER (VERT-HORIZZ) CHIP CONVEYOR HYDRAULIC CONTROL UNIT WITH FRIDGE UNIT INT AND EXT COOLANT SYSTEM LOGIC FOR HELICAL INTERPOLATION DISP. PALLET ACCESS DOOR SECURITY DOUBLE NUT PRELOADED ON LINEAR AXES LINEAR AXIS OPTICAL LINES AND CIRCULAR AXES ENCODER X-Y-Z AXES TELESCOPIC PROTECTIONS ELECTRIC CABINET WITH AIR CONDITIONER

Condition: good (used), Loos 8000kg/h. Bj.2001. top condition. incl. Weishaupt burner G70 Klsdpfxem Rhd Ds Ap Aow

Condition: used, - Serial No.: L281 - Year: 2006 - Dimensions: 2300x1855x2550 mm - Heating power: 68 kW - Electrical power: 2 kW - Trolley dimensions: 800x1000 mm - Voltage: 400V - Sold with gas burner - Refurbished equipment: the equipment is prepared upon order; lead times for handling and delivery are agreed upon at that moment (please request the price after refurbishment) The integrated ventilation and cooling principle in these ovens guarantees extremely reliable heat exchanger performance. 85% of the produced heat is utilized, leading to significant energy savings. Klodewxl E Njpfx Ap Aow Additionally, the air extraction and renewal system creates a depression in the baking chamber, allowing all steam to be evacuated at the end of the baking cycle. The resulting dry atmosphere produces extra crispness in bread crusts. Another advantage: heat and humidity do not spread throughout the bakehouse. When the oven door is opened, air from the bakehouse enters the oven, not the other way around. Advantages: - Perfectly uniform baking. - Maximum heat exchanger efficiency. - Reduced energy consumption. - Exceptional build quality and service life. - Baking capacity suitable for a wide range of customers (craft, industrial, etc.). - Easy to use.

Condition: used, -Dimensions (LxWxH): 825x970x1830 mm -Maximum permitted weight: 75 kg -Fermentolevain FL80 -Total usable weight: 60 kg -Total capacity: 140 L -Power: 1.15 kW -Voltage: 380 V Kedjwxx Ikjpfx Ap Aelw -Weight: 220 kg Iisy Tdu Dewxx Ikocof -Year of manufacture: 2006 -Features: Galvanized steel frame -Mounted on 4 swivel wheels, 2 with brakes -Tank and tools in stainless steel -Electronic control panel with memory -Cleaning system with washing shower -Reinforced motor

Condition: used, Year of construction: 2009, operating hours: 12,395 h, Equipment: all wheel drive, Internal vehicle number: G400017 Available immediately on our premises in Kaufungen. For more information, please contact: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Operating hours: 12,395 Air conditioning Quick coupler Lehnhoff MS08 Weight: 8,590 kg Blade Klsdpfx Aoyvm Awop Ajw Engine: Isuzu Deep excavation bucket, 400 mm cutting edge Deep excavation bucket, 900 mm cutting edge Grapple, 600 mm Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2002, Technical details: thickness: 0,6 mm width: 1200 mm Length: 100 mm work speed: 1,5 - 3 m/min motor power: 45 kw compressed air: 7 bar Total weight, approx.: 4500 kg dimension machine xH: gesamt: 20 m / 2,6 m / 3 m m 2 pcs Sandwich Panel Production Plant The plant is especially suitable for producing light laminated panels. The plant consists of a feeding system (conveyor belt) for the material, cutting system, profile system and an electronically control system. The plant has a length of 20m, width of 2,6m, height of 3m. The total weight of the plant is approximately 4,5 tons. The power consumption including the thermal output is 36 KW. The recommended material of the internal layers are flame retardant Polystyrol or other light heat insulation materials. The sheet will be stable connected under pressure and heat with the Polystyrol through double sided application from portions of glue on the Polystyrol. The panels have good physical characteristics such as thermal insulation, sound insulation, wet consistency, bending strength, compressive strength and mechanical attributes. Any length of the laminated panels is possible and adjustable on customer demand. The color of the panel is variable and is depending from the color of the used sheets. Data Sheet Klsdpfx Asu Nxa Hop Ajw Power Consumption of the plant (with heating system): 36KW Measurements: - Length = 20m - Width = 2,6m - Height = 3 m - Operating Temperatures: The optimal temperature for producing the panels is approximately 25 °C. - Material: galvanized metal sheet on rolls, sheet thickness 0,3 – 0,6mm and a width of 1200mm - Power Supply: 380 V 50Hz - Maximum engine power: 45 KW - Compressed Air: 7 bar Measurements of the laminated panels: Model 1 - Width 800 – 1200 mm - Thickness 20 - 30mm Model 2 - Width 1150 mm - Thickness 50 – 150mm( adjustable) production plant consists of: - unwinding device - feed system - lamination - cutting device - glueing - fume extractor device - stacking device - electronic control system (Mitsubishi) *

Condition: new, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 1,085 kg, maximum load weight: 565 kg, overall weight: 1,650 kg, color: blue, gearing type: mechanical, suspension: other, number of seats: 1, total length: 2,760 mm, Equipment: all wheel drive, Power steering, diesel manual transmission, year of manufacture 2024, 18.2 kW, 1,319 cm³, all-wheel drive, 1 seat, side-mounted gear lever, shuttle transmission, 6 forward and 2 reverse gears, rollover bar with beacon, analog fuel gauge, rear work lights swiveling, 2 front weights at 15 kg each, 3-cylinder, power steering, total length 2,760 mm, agricultural tires, front diagonal tires: 6.0-12, rear 8.30-20, weight 1,085 kg, permissible total weight 1,650 kg. The vehicle had a one-day registration in 04/2024. FOR US, CONDITION AND FEELING ARE MOST IMPORTANT; PRICE COMES SECOND. For further questions, please contact Mr. Faller at the provided number. //*EXCHANGE, TRADE-IN, OR FINANCING OF YOUR VEHICLE POSSIBLE! All information provided without guarantee.* You will find more offers on our homepage. The description and specified data do not constitute a guarantee and are non-binding. The only binding agreement is the purchase contract concluded at the dealership upon purchase of the vehicle. Errors and prior sale excepted! Ksdpfxowtnzpj Ap Aolw

Condition: new, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 1,210 kg, maximum load weight: 790 kg, overall weight: 2,000 kg, color: blue, gearing type: mechanical, suspension: other, number of seats: 1, total length: 2,895 mm, Equipment: all wheel drive, Power steering, diesel, all-wheel drive, 18.2 kW, 1,319 cm³, 1 seat, easy-shift transmission, 9 forward gears + 9 reverse gears, shuttle gearbox, side-mounted gearshift, analog fuel gauge, rear swivel work lights, roll bar, 2 front weights at 15 kg each, 3 cylinders, power steering, total length 2,895 mm, weight 1,210 kg, bias-ply tires front: 6.0-12, rear: 8.30-20, permitted total weight 2,000 kg. FOR US, CONDITION AND GUT FEELING ARE MOST IMPORTANT; PRICE COMES SECOND. If you have any further questions, Mr. Faller will be happy to assist you at the given number. //* TRADE-IN, PART-EXCHANGE, OR FINANCING OF YOUR VEHICLE POSSIBLE! All information is provided without guarantee. For more offers, visit our homepage. The description and specified data do not constitute a guarantee and are not binding. The only binding agreement is the sales contract concluded at the dealership upon purchase of the vehicle. Subject to errors and prior sale! Ksdpfx Apswtpvus Aolw

Condition: new, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 1,300 kg, maximum load weight: 510 kg, overall weight: 1,810 kg, color: blue, gearing type: mechanical, suspension: other, number of seats: 1, total length: 2,895 mm, Equipment: all wheel drive, differential lock, Power steering, diesel, all-wheel drive, 18.2 kW, 1,319 cm³, hydrostatic transmission, 3-cylinder, 20 km/h, differential lock, power steering, 1 seat, analog fuel gauge, rear swiveling work lights, 2 front weights at 15 kg each, roll bar with beacon, cross-ply tires front: 6.0-12, rear 8.30-20, overall length 2,895 mm, weight 1,300 kg, permissible total weight 1,810 kg. Turf tires available for an extra charge of €500.00 net. FOR US, CONDITION AND FEELING ARE DECISIVE; PRICE IS SECONDARY. For further questions, please contact Mr. Faller by phone. EXCHANGE, TRADE-IN, OR FINANCING OF YOUR VEHICLE POSSIBLE. All details provided without guarantee. For more offers, visit our homepage. The description and data provided do not constitute a warranty and are not binding. The only binding agreement is the purchase contract signed at our dealership. Subject to errors and prior sale! Kedpfx Apewtpvzo Aslw

Condition: used, mileage: 1,485 km, power: 40 kW (54.38 HP), first registration: 01/2022, fuel type: diesel, overall weight: 4,000 kg, next inspection (TÜV): 01/2028, color: blue, gearing type: mechanical, suspension: other, number of seats: 1, operating hours: 1,485 h, Equipment: additional headlights, air conditioning, all wheel drive, cabin, trailer coupling, 1. Hand, diesel engine, first registered on 12.01.2022, 40 kW, 2,482 cm³, 1,550 operating hours, all-wheel drive, headlights, trailer coupling, 1 seat, low cab, air conditioning, heater, digital dashboard, front PTO, front hydraulics, 40 km/h, special cab for use with pesticides in agriculture, 1st owner, permissible total weight 4,000 kg. FOR US, THE CONDITION AND OVERALL IMPRESSION ARE DECISIVE; THE PRICE IS SECONDARY. If you have any further questions, please do not hesitate to contact Mr. Faller at the following number: //*EXCHANGE, TRADE-IN, OR FINANCING OF YOUR VEHICLE IS POSSIBLE! All information without guarantee.* You can find more offers on our website: The description and specified data do not constitute a guarantee and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Errors and prior sale excepted! Klsdpfx Apoy Idcre Aew

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance Kodpfxjyc Ig Aj Ap Aslw — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Condition: excellent (used), Professional milling head from the renowned brand Sandvik Coromant. Working diameter: Ø80 mm – ideal for roughing and finishing machining of steel, stainless steel, and cast iron. Mount: SK40 / ISO40. Model: 346.220242R25. Design with indexable inserts – currently equipped inserts are in good condition. High precision, rigidity, and durability – industrial-grade head for CNC machining centers and milling machines. Original Sandvik product – a leader in cutting tool technology. Condition: used, in very good technical condition – ready for immediate operation ✅ Ideal for facing, face milling, and processing large surfaces ✅ High performance and long service life thanks to high-quality inserts ✅ Premium tool – German and Swedish quality Kledsxld Awepfx Ap Ajw

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 1,600 mm, load center: 600 mm, mast type: simplex, fork length: 1,150 mm, tire condition: 100 %, front tire type: polyurethane tires (non-marking), empty load weight: 250 kg, total height: 2,030 mm, total length: 1,642 mm, total width: 740 mm, color: yellow, Equipment: pallet forks, A mast trolley with a lifting capacity of 2000 kg is a versatile device used for unloading delivery vehicles as well as for work in warehouses and shops. Its solid construction ensures long service life, while the polyurethane wheels provide quiet and trouble-free operation. Technical Specifications Load capacity: 2000 kg Lifting range: 85–1600 mm Fork length: 1150 mm Mast type: single mast Overall height: 2030 mm Height with forks raised: 2030 mm Overall length: 1642 mm Fork outer width: 550 mm Overall width: 740 mm Net weight: 250 kg Number of wheels (front/rear): 2 / 2 Klodpfx Apeytcmrj Asw Wheel and roller material: polyurethane Steering wheel dimensions: 180 × 50 mm Roller dimensions: 75 × 70 mm Load center: 600 mm Fork width: 160 mm Fork height: 60 mm Fork inner width: 390 mm Adjustable fork spacing: Yes Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Should you be interested in other machines please visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm,

Condition: new, Year of construction: 2026, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) Kljdpfxoulwg Nj Ap Asw 2. dryer 3. powder coating system 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh