Used Sharpen for sale (497)

Condition: excellent (used), HSS saw grinder VOLLMER model CMS 10M Lhjdji Hchdepfx Ahvsd

Condition: good (used), Tool and cutter grinder GOTHA model SWV250 Lhoderallcopfx Ahvod

Condition: new, Year of construction: 2022, Magnetic table for carbide blanks. Available in different sizes : Lhjdpfx Aohq Rkpshvjd 1) mm 200 x 90 x 20 2) mm 300 x 90 x 20 3) mm 400 x 90 x 20 4) mm 500 x 90 x 20 5) mm 600 x 90 x 20

Condition: excellent (used), HSS saw grinder Schmidt Tempo model AS2 Ljdpfx Aheurvx Dsvohd

Condition: good (used), Tool and cutter grinder VEB model SW200 Ljdpfjqutcljx Ahvehd

Condition: good (used), Double side grinder for carbide saws VOLLMER model Finimat DUO TS 1000 Lhjdpfxevgfifo Ahvjd

Condition: used, Gatter Saw Sharpening Machine Vollmer CNHV Year of manufacture: 1978 Gatter saw blade width: 60-160 mm Toothing length: max. 1450 mm Tooth pitch: 14 – 40 mm Lsdpfxoxvz R Hj Ahvshd Tooth height: max. 25 mm Rake angle: 0° - 30° Blade thickness: 0 – 6 mm Grinding wheel: diameter 200 mm Working speed: 30, 50, 75 teeth per minute Tooth forms: 3 pcs Connected load: 2.1 kW Weight: 500 kg Including gatter saw set device Lorroch SGB 6 (similar to Meinert PH6D) year 1983

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Lhjdpfxjurkyps Ahved Factory No.: 30769 Rated current: 2 A

Condition: not inspected (used), I sell the saw blade and saw band sharpening machine Stankoimport TCPA-6, Made in Russia. Lhedpfxod Hx R Do Ahvod

Year of construction: 1980, condition: excellent (used), I sell the saw blade and saw leaf sharpening machine Loroch G77, Made in Germany. Ledpfxsim Ea Dj Ahvehd

Year of construction: 1993, condition: repair required (used), Circular saw sharpener Loroch AK Automat year 1993 Lhedogtmt Topfx Ahvod blade diameter min/max - 80/710 mm graduation 3-25 mm grinding disc type - Borazon grinding disc diameter 200 mm drive motor 0,55 kw working speed 10-45 z/min coolant dimensions 1500×1200 x 2300 mm weight 750 kg

Year of construction: 2005, condition: like new (used), WEBER MSG 460-5 ID.NO. 2553 Weber MSG 460-5 knife sharpener for sharpening round blades for slicers.. Lhedpepcf Hisfx Ahvjd Dimensions 55 x 60 cm H 75 cm.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1500x2100 mm Weight 800 kg Lhedpfsv A Hg Dex Ahvsd Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1100x1500x2100 mm Weight 800 kg Total power requirement 3 kw Lhodpfx Aov A Hgwohvod

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 18010, grinding wheel diameter: 762 mm, helix angle: 21 °, overall weight: 4,200 kg, grinding diameter: 400 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Grinding diameter: 400 mm Template wheel diameter: 64 - 320 mm Grindable module: 1 - 12 Template wheel width: 40 mm Number of teeth: 13 - 240 Roll curve diameter min./max.: 73 - 320 mm Workpiece carriage speed: 5 - 20 - 30 - 40 teeth/min Lhodpfexclb Aox Ahvjd Max. grinding wheel diameter: 762 mm Grinding wheel swiveling range: 5 - 21° Grinding slide swiveling range: ± 2 x 35° MACHINE DETAILS Total power requirement: 3 kW Machine weight: 4.2 t

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 86731, saw blade diameter: 760 mm, tooth pitch: 25 mm, grinding wheel diameter: 200 mm, saw blade width: 8 mm, grinding wheel width: 32 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to collect the machine on time between 28.07.2025 and 31.07.2025. TECHNICAL SPECIFICATIONS Saw blade diameter: 140 – 760 mm Saw blade tooth pitch: 1 – 25 mm Number of teeth: 2 – 998 Saw blade thickness: up to 8 mm Grinding wheel dimensions: 200 x 32 mm MACHINE DETAILS Overall width: 1,500 mm Overall length: 1,500 mm Overall height: 2,000 mm Total weight: 1,500 kg Voltage: 400 V Frequency: 50 Hz Rated power: 8 kVA Current consumption: 16 A Lhedpfx Aowvi S Uohvsd

Condition: used, Year of construction: 1990, Motor output 5 kW Weight 1.500 kg Ljdpfx Ahewgnz Nevohd Control cnc

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm clamping length 20 mm total power requirement 0,25 kW weight of the machine ca. 500 kg dimensions of the machine ca. m Ledpfxet Hw Nmj Ahvjhd Profile Tool Grinder for Chamfer Angles, accessories

Condition: used, Year of construction: 1955, saw blade diameter 70 - 230 mm sawblade width 12 mm hole of sawblade 10 - 50 mm grinding wheel diameter 120 mm grinding wheel width 6 mm grinding wheel hole diameter 32 mm no. of teeth 30 - 400 total power requirement 0,33 kW weight of the machine ca. 350 kg Ledstqqk Nspfx Ahvohd dimensions of the machine ca. 0,80 x 0,70 x 1,70 m

Condition: used, Sharpening machine for circular saws/rip saws IDL000829 - manufacturer: IMW Ledpfxsvlczvo Ahvjhd

Condition: ready for operation (used), Technical characteristics For blades from 40 mm to 330 mm For standard and bi-cut blades Pitch from 10 to 70 mm Lhjdpfet D Su Esx Ahvsd Tooth height 5 to 25 mm Feed rate from 10 to 40 teeth/min Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics Affûteuse WEINIG RONDOMAT 950 Sharpening and manufacturing of profiled irons from raw irons Max. grinding wheel diameter : 225 mm Quick clamping Widths : 2 ; 3 ; 4 ; 10 mm Bore 60 mm 4 rotation speeds : 1500, 1700, 2400 and 3000 RPM Clearance angle : 15° to 35 Cross-bearing table Tool holder Cutting diameter : 100 to 230 mm Tool width : 240 mm Copying device with constant axial system Système de mesure OPTICONTROL Flying circle diameter : 0 to 300 mm Tool length : 0 to 330 mm Shaft diameter 40 mm Electronic digital display of tool radius and height Projector for optical data acquisition Measurement and display system for optical tool measurement Checks correct positioning of cutters on heads Power and Motors Voltage: 400 V Pluging: Three-phased Lhedpfx Ajt D Su Sjhved Overall dimensions

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Lsdpfxoxlfwps Ahvjhd Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Lsdsxliguepfx Ahvehd Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, Ledpfxegwct Ds Ahvjhd • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.