Used Screenprinting Machine for sale (64,989)

Condition: used, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 5,200 kg, empty load weight: 5,200 kg, operation weight: 5,200 kg, mast type: duplex, Year of construction: 2023, operating hours: 950 h, platform length: 6,500 mm, transport length: 2,240 mm, transport width: 44,145 mm, transport height: 2,315 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1600-TX3 pile driver with Automatice Leveling, is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1600TX-3 provides superior control and precision, even in challenging terrains. 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains. Nledpfxszwm Elj Ahksf

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, controller model: MAX 5, workpiece weight (max.): 11,000 kg, table width: 1,700 mm, table length: 3,000 mm, table load: 11,000 kg, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, We are offering the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in requirements, it will not be put into operation. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Nledpfxozl Hbco Ahkof Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose–table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool holder: HSK63-A Speed max.: 18,000 rpm Power: 45/63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60-position EQUIPMENT: - Internal cooling through spindle 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island recognition - Multi-touch SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Year of construction: 1991, condition: ready for operation (used), Dalex DR-F 2 0.35 m³/h 220 Volt No. 109115732 Year of manufacture 1991 Nedpfsftbtmox Ahkslf Refrigerant R12 – needs to be refilled.

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Nlsdpfx Aheyi A Tdskjf Storage location: Nattheim

Year of construction: 2004, condition: used, A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible. Nlsdpfxezvy E Ao Ahkof

Year of construction: 2001, condition: used, Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible. Nledpfezwfqysx Ahkef

Year of construction: 2019, condition: used, Travel X/Y/Z: 650mm/500mm/475mm, table dimensions X/Y: 1530mm/450mm, max. table load: 400kg, spindle taper: SK40, max. spindle speed: 4000rpm, spindle power: 7.5kW, milling head swivel range: 140°, control: Heidenhain TNC 620. Weight: approx. 2750kg, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2050mm. An on-site inspection is possible. Nlsdpfjzwgidox Ahkjf

Condition: used, Year of construction: 2015, A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible. Nljdpszwnzbsfx Ahkjf

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: July 2026 Excellent condition, very few operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn rapid programming Powertec handheld multifunctional control unit Manual erosion with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 Amperes (60 Amperes peak current) High Speed Jump max. 18,000 mm/min Nedpfx Ahszvctpjkjlf Travel ranges (X, Y, Z) 550 x 850 x 450 mm Linear measuring system in all axes Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Work tank (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC Production Chuck CO2 fire extinguishing system 08/26.

Year of construction: 2011, condition: excellent (used), Manual chamfering machine for round tubes and bars 4-spindle deburring and chamfering machine For internal and external deburring/chamfering Spindle speeds: 70/140 rpm Materials: steel, stainless steel, aluminium, non-ferrous metals Diameter: Ø 2 – 75 mm Min. workpiece length: from 100 mm Deburring time: 3–4 sec. / end face The machine is equipped with deburring tools from the manufacturer Kopal. Nljdpfx Ahjzwpwqskof Tool holder is MK3 The deburring tools are adjustable so that the same chamfer depth is always achieved. Very good condition

Condition: used, Year of construction: 2010, Machine design: Cantilever machine Travel in X-direction: 3800 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Vector-controlled spindle: Yes Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Nlodpfx Aozwg H Aohkof Back wall milling units: Yes Control system type: PC control Operating system: Xylog Typewriter keyboard: Yes Mouse: Yes Programming system: Xilog DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table design: Console table, tubeless Support arms: 8 pcs Suction plates and clamps: various included Number of vacuum pumps: 1 pc Changeable field layout: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 6600x4800 mm Extraction diameter: 300 mm Storage location:

Condition: ready for operation (used), Year of construction: 2017, - USED - 3-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE       X-AXIS TRAVEL: 2500 mm Y-AXIS TRAVEL: 1800 mm Z-AXIS TRAVEL: 800 mm DISTANCE SPINDLE NOSE-TABLE: 250 - 1050 mm RAPID FEEDS X-Y-Z: 20 m/min SPINDLE: 10000 rpm; 24,5 - 63 kW; 117-300 Nm; ISO 50 - BT TABLE SIZE: 2800 x 1700 mm MAX ADMITTED LOAD: 8000 Kg HIGH PRESSURE COOLANT: INCLUDED TOOL MAGAZINE: CHAIN-TYPE ; 60 POS MAX TOOL DIAMETER: 130 mm MAX TOOL LENGHT: 350 mm Nlsdpezlu S Aofx Ahksf MAX TOOL WEIGHT: 15 Kg CONTROL UNIT: HEIDENHAIN WEIGHT: 29500 Kg OVERALL DIMENSIONS: 4200 x 7100 x 4500 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER ; LINEAR SCALES ; PORTABLE HANDWHEEL ; EXHAUST SYSTEM

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition Nlsdpfx Ahjzugnzekef

Condition: excellent (used), CATALOG NUMBER 7153 TECHNICAL DATA Nsdpfx Ahjzulgcekelf - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70mm - Hopper dimensions (H/W): 920x870mm - Output: approx. 110kg/h - Automatic machine operation - Oil cooler - Oil pre-heating - Inspection window - Motor: 7.5kW - Dimensions (L/W/H): 1750x1300x1460mm - Weight: 825kg ADVANTAGES – Unpainted – Italian production – Used briquetting press – Very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR exchange rate (Prices may vary in case of significant fluctuations)

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm z-travel // mm Nodpfeig A Erjx Ahkjlf total power requirement / kW weight of the machine ca. 950 KG

Condition: used, Year of construction: 2008, working width / mm workpiece height / mm / Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Operating voltage 400 VAC Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Weight of the machine working width 1540 mm approx. 5600 kg Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) Nljdpeinwwzefx Ahkef The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection Nljdoy Samuepfx Ahksf SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Njdpfjy Saqgjx Ahkelf Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: used, Year of construction: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Control Fanuc 18iM Super Cap II turning speeds 60-6000 U/min tool magazin: 60 tool taper BT50 total power requirement 26 kW weight of the machine ca. 23,6 t Nlederw Dknepfx Ahkjf required space 6,3 x 3,3 x 3,8 m

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Control NC total power requirement 3 kW Nlodpfxsymf Tbj Ahkjf weight of the machine ca. 250 kg required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: new, Year of construction: 2025, weight 340 kg diameter 960 mm height 980 mm 0 219 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. These type of machines have large screen area and allow easy separation of work pieces from the grindstones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge. Nodpoymf Raefx Ahkolf

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 Nledpfxey S T T Ue Ahkef max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: excellent (used), Year of construction: 2015, X-axis 850 mm Y-axis 520 mm Z-axis 475 mm Spindle speed 10,000 rpm Spindle mount HSK 100 Tool changer 40 positions Control SIEMENS 840 Dsl Power 33 kVA Nlodpjwvr Tnofx Ahksf Including internal coolant (IKZ) Including various tool holders Including measuring probe TS 649 Including Rotoclear Spindle hours: 10,730 h

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 740 mm Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer: 24 positions Njdpozcpplsfx Ahkslf Control system: HAAS Version M15 Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation

Condition: excellent (used), Year of construction: 2008, Min. tool mounting height: 200 mm Max. tool mounting height: 350 mm Max. opening stroke: 380 mm Screw diameter: 22 mm Clamping force: 800 kN Tie bar spacing: 470 x 420 mm Nljdpfxszkfd Te Ahksf Delivery does not include attachments/accessories. The machine is in very good condition and is powered on.