Used Scrap Winder for sale (679)

Condition: ready for operation (used), functionality: fully functional, For sale is a set of 3 scraped surface heat exchangers. This is a pilot plant setup, most recently used in the R&D department of a cheese factory. Njdjx R Ulpepfx Ahvowd Manufacturer: Schröder Year of manufacture: approx. 2005 2 scrapers for heating, 1 scraper for cooling Condition: good, fully operational

Condition: new, Scrapers are used as tools for the fine removal of chips, for removing old layers of paint and for cleaning dirty surfaces. Scrapers are usually not functional at the time of purchase, but only a piece of sheet steel. To make them work, a fine burr must first be ground. We offer you fully functional scraper blades with a thickness of 0.4 mm and 0.5 mm made of Swedish steel for new purchases. If required, we will be happy to sharpen your "used" or "new" scraper blades and have them returned to you in working order. Nwjdeftm Sljpfx Ahvsd Contact us. We will be pleased to make you an offer for new scrapers - ground or unground - and/or a grinding offer. We would be pleased to send you further information about scraper blades.

Condition: good (used), functionality: fully functional, We offer a used Liebherr scraper, Nsdpfx Ahorpmlrjvjwd semi and fully automatic. Fully functional, with control system.

Year of construction: 2025, condition: new, functionality: fully functional, UMG-110.56 Scraper conveyor is designed for transporting wood waste after processing. The conveyor works at an angle. The conveyor is anchored to the base during installation. The speed of the chain and scrapers can be set with a speed regulator, the design speed is 15m/min at 50Hz. The length and height can be adjusted according to your needs. Nwodpfxjwdgfus Ahvsd

Condition: used, GEWINDEROLLMASCHINEN VEB WMW GWR 80GR WITH A LOT OF TOOLS Njdpfx Ahjig Txmovewd

Condition: used, Silo discharge Nsdpfx Ahjiw Iagovjwd

Condition: used, Wood chip screening plant Chip screening plant Width 1,9m Length 5.3m Height 0.8m 1st grid 40x40mm 2nd grid 15x15xmm Double scraper for screening system Total length 7.5m (2m straight, 5m upwards) Outer flange width 760x610mm Scraper width 400mm + 250mm Gear motor 4 kW Nsdpfxotxblko Ahvewd Speed 39 rpm

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Nedpfxsrn Sqhs Ahvswd Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive Njdpetiy Ntjfx Ahvswd 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 372, total width: 3,750 mm, total length: 10,600 mm, total height: 2,700 mm, power of vacuum pump: 5 W, heating capacity: 100 kW (135.96 HP), compressed air connection: 7 bar, Equipment: documentation/manual, 1 Used WM FC 780E roll fed thermo forming line, with KVH 83 Pre Heater, fully operational, can be seen in production. Currently used for PP & RPET tray forming, typically Food Packaging the machine is used daily and produces great quality products. Therefore it is maintained to V high standard with all WM spare parts, any remaining spares will be included with this line, Toggles, Chains, etc. Price includes Pre Heater for processing PP, Spares & Loading on to your transport. Following a new line now installed Jan 2026, this WM line is available immediately. WM 780E s/n 372 yr. 2008 UNWINDER Max. reel diameter (mm) 1.200 THERMOFORMING MACHINE Max. tool size (mm) 780* x 570 Max. tool size with pneumatic clamp frame (mm) 750 x 570 Max. pos/neg depth (mm) 130/130 Max. sheet width (mm) 810 Max. sheet indexing (mm) 570 Clamping force (daN) 30.000 Upper/Lower heating, installed power (Kw) 50/50 Nwsdpfxjx Uym He Ahved CUTTING PRESS Max. cut dimensions (mm) 760 x 550 Platen clamping force (daN) 60.000 Upper/Lower platen stroke (mm) 150/150 steel rule heating plate (Kw) 7,8 VERTICAL STACKER Max. stacking dimensions (mm) 760 x 550 SCRAP WINDER Max. scrap roll diameter (mm) 600

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic side sealing machine for packaging products – regardless of their length – with full wrapping and without film overlap. The maximum output is 120 cycles/minute. Product feeding is performed via a conveyor belt while simultaneously inserting the product into a center-folded film through a forming shoulder. The infeed conveyor can be easily adjusted for different product widths. The film tube containing the wrapped, aligned products is completely sealed on the side via a side sealing unit. After the product is wrapped with film, transverse sealing is carried out by a continuously heated, follow-along sealing system. The height of the forming shoulder and sealing units is manually adjustable. The remaining film scrap is taken up by a film winder. Nwodpfx Ahjw E Igvevjd Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing bar: 550 mm Film: center-folded film, approx. 12–80 µm Maximum film roll outer diameter: 400 mm Maximum film roll width: 600 mm Minimum product length: 120 mm Minimum product width: 80 mm Working height: 780–930 mm Tunnel passage width: 450 mm Tunnel passage height: 200 mm Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: used, Year of construction: 2014, Excellent BLM LT5 FIBER TUBE LASER with ca 12000 cutting hours, 6.5m bundler loader and 4.5m discharge. Equipped with: 4.5m finished parts collection table Rear scrap conveyor 1KW IPG fiber laser Chiller Extractor Nwsdpfxsyxmwts Ahvod Weld seam detector Immediately available for delivery. Can be inspected under power upon appointment. Video available on request. Laser output: 1000W Loading: 6.5m Unloading: 4.5m

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 720 kg, total length: 320 mm, cutting length (max.): 300 mm, Alligator shears JMC 320 Fully overhauled, as new IMMEDIATELY available from stock IUT Beyeler AG, DE-06188 Landsberg. Financing and rental possible. We are looking for used alligator clippers! 12-month warranty The well established 320 Shear is a must for any yard and is now recognised as the industry standard for all shears of this type. One of our most popular shears, the McIntyre 320 Shear has maintained dominance in a demanding market due to its strength, quality and reliability The 320 is powerful enough to deal with a wide range of cutting and cleaning operations and is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations. The 320 can also be used to cut ferrous metals. Nwjdpsfxvkljfx Ahvod Every shear comes with 1 year guarantee, spare parts can be delivered within 24 hours to whole europe.

Condition: good (used), Ideal 4850-95 Paper Cutting Guillotine Machine in very good condition, ready for production. Technical specifications: Working width: 475mm Stack height: 80mm Minimum scrap: 35mm Maximum distance from the knife to the saddle: 450mm 230V power supply Key features: Electromechanical drive for the knife, clamp, and clamp Automatic clamp synchronized with the knife’s cutting movement Transparent covers on the front and rear tables Electronically controlled, two-handed cutting start Automatic knife return from any position Optical cutting indicator Additional equipment includes: tools, cutting stick, and documentation. Nsdoywdm Njpfx Ahvewd

Condition: used, fuel type: gasoline, empty load weight: 8 kg, color: grey-black, gearing type: mechanical, Year of construction: 2025, TITLE: NEW 5-TINE GRAPPLE FOR SCRAP AND BULK MATERIAL HANDLING WITH INTEGRATED ROTATOR REF.: 25-ATT-06 YEAR: 2025 MODEL: PM 5 200R SERIAL NO.: 022525 WEIGHT: 420 kg CAPACITY: 2500 kg VOLUME: 210 l Subject to errors and/or omissions The listed prices do not include VAT. Please contact our sales department for up-to-date price and condition information. For further information: Loris: 3484773001 URL: #glispecialistidelloscarrabile Nsdpoxzlzmjfx Ahvowd SCARRABILI AURORA Operates in the sale and purchase of industrial and commercial vehicles, with a primary focus on the waste management sector. Specialists in trucks, trailers, and hooklift equipment. We have a fleet ready for immediate delivery comprising over 50 trucks and more than 150 containers, hooklift bins with and without cranes. E&OE Due to the quantity of ads and information listed, Aurora recommends verifying the accuracy of all details with our sales staff.

Condition: used, fuel type: gasoline, empty load weight: 8 kg, color: grey-black, gearing type: mechanical, Year of construction: 2025, NEW ROZZI POLYP GRAB WITH 6 OFFSET TINES FOR SCRAP AND BULK MATERIAL HANDLING WITH INTEGRATED ROZZI ROTATOR REF.: 24-ATT-18 MODEL: RTG250D Weight: 460 kg Lifting capacity: 1800 kg Capacity: 250 lt Except for errors and/or omissions Displayed prices are exclusive of VAT. Please contact our sales department for an updated price quotation and terms. For more information: Loris: 3484773001 Nodjxzlzyspfx Ahvjwd URL: #glispecialistidelloscarrabile SCARRABILI AURORA Operates in the purchase and sale of industrial and commercial vehicles, mainly specializing in the waste management sector. Specialized in trucks, trailers, and roll-off equipment. Immediate availability of over 50 trucks and more than 150 bins, containers with and without roll-off cranes. S.E.&O. Given the large number of ads and details listed, Aurora recommends verifying all data with our sales staff.

Condition: new, functionality: fully functional, power: 260 kW (353.50 HP), fuel type: electric, color: dark red, overall weight: 42,000 kg, operation weight: 42,000 kg, chain condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, The construction industry is moving away from the "build-demolish-dump" cycle and toward Urban Mining. At the heart of this shift is the Mobile Stone Crusher, a powerhouse designed to turn piles of jagged concrete and brick into high-quality recycled aggregate right on the job site. --- Nwjdpfxoq I Nvie Ahvjd ## 1. The Engineering Logic: From Waste to Wealth In a traditional setup, demolition waste is hauled to a landfill—a process that is expensive, carbon-heavy, and wasteful. A mobile crusher flips the script. It brings the factory to the waste. By processing materials on-site, contractors save on transport costs and produce "Road Base" or "Sub-base" materials immediately. ### Key Components of a Mobile C&D Plant: * Vibrating Feeder: Uses a "Grizzly" bar system to pre-screen fines (dirt/sand) so the crusher only works on the big stuff. * Crushing Unit: Usually a Jaw Crusher (for primary compression) or an Impact Crusher (for better grain shape and higher reduction ratios). * Magnetic Separator: This is the "secret sauce" for C&D waste. It pulls out rebar and scrap metal that would otherwise contaminate the recycled aggregate. * Discharge Conveyor: Transports the finished product to a stockpile. --- ## 2. Technical Specifications & Performance When evaluating these machines, "Throughput" ($TPH$ or Tons Per Hour) is the metric that matters. For C&D recycling, the machine must handle unpredictable feed sizes and varied material hardness. ### Typical Technical Specifications Table | Feature | Specification Range | Why it matters | | --- | --- | --- | | Throughput | 100 – 500 $t/h$ | Determines project timeline efficiency. | | Max Feed Size | 500mm – 1,100mm | Dictates if you need a hydraulic breaker first. | | Power Source | Diesel-Electric or Hydraulic | Dual power (Electric) is better for urban noise/emissions. | | Crusher Type | Jaw or Impact | Impactors provide a more "cubic" final product. | | Mobility | Crawler Tracks | Essential for moving over uneven rubble piles. | --- ## 3. The "C&D" Specialization Recycling construction waste isn't just about "breaking rocks." It’s about cleaning material. Modern mobile units are equipped with: 1. Over-belt Magnets: Specifically designed to lift heavy steel reinforcement bars (rebar) out of the crushed concrete flow. 2. Dust Suppression: High-pressure misting systems to keep neighbors happy and workers healthy in tight urban environments. 3. Active Pre-screening: Removing sticky soil or asphalt fines before they enter the crushing chamber to prevent "plugging." > The Insight: Using a mobile crusher can reduce project carbon footprints by up to 40% simply by eliminating the "truck-in, truck-out" logistics of aggregate management. --- ## 4. Maintenance and Longevity Because C&D waste is highly abrasive (and often contains "surprises" like wood or plastic), maintenance is non-negotiable. * Jaw Plates: Must be flipped or replaced regularly to maintain the "Closed Side Setting" (CSS), which determines the size of your output. * Blow Bars: In impact crushers, these are the high-wear items that take the brunt of the force. --- Would you like me to compare the cost-effectiveness of Jaw vs. Impact crushers for a specific type of demolition project, or perhaps look into the environmental regulations regarding on-site crushing?

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Nsdpfx Ahevn D I Njvjwd Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Nwedoyxpawopfx Ahved Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: excellent (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 110-00310, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 2,500 mm, feed length Y-axis: 800 mm, pneumatic connection: 6 bar, compressed air connection: 6 bar, The KSL110-Headbag CNC Rotary Head Sewing System is in excellent condition and has logged approximately 2,000 operating hours. Fields of Application: Demanding safety, functional, and decorative seams. Features: - Sewing machine driven on the X axis, template driven on the Y axis - 360° rotary head with alternating double feed for perfect seam results in multi-directional sewing processes - Intermittent feed (feed stops when the needle pierces the material) - Switchable needle feed (on/off) for continuous sewing with maximum seam quality - Sewing head can be pneumatically lifted (75 mm) for direct access to any seam position - Two 26 mm bobbins and hooks - Excellent sewing properties thanks to the vertical hook system - Top thread tension is electrically/pneumatically adjustable via menu with Eltex unit - Broken thread monitoring - Bobbin thread monitoring via stitch counter - Electromagnetic thread trimmer for upper and lower thread - Mobile electric bobbin winder (freely positionable) - The touchscreen control panel provides intuitive operation and stands out with its modern, clear layout. Seam progress can be monitored in real time on the screen. Special Features: - Automatic detection of the workpiece holder/sewing program via hand scanner and barcode ensures additional process safety - Sewing area is protected by light barriers (CE compliant) - Pneumatic presser foot height adjustment - Clamping device for fixing two sewing templates in the working area Technical Data for the KSL110-Headbag CNC Rotary Head Sewing System: - Length and width: 3,495 mm x 4,276 mm - Height: 1,685 mm - Weight: 2,000 kg - Max. sewing area: 2,500 mm x 800 mm - Stitch type: 2-needle/double lockstitch - Max. material thickness: 10 mm - Max. sewing speed: 2,800 stitches per minute - Max. stitch length: 12 mm - Operating voltage: 3P+N+PE / 400 VAC / 50–60 Hz - Power consumption: 16 A / 5 kW - Operating pressure (min. – max.): 6 bar - Year of manufacture: 05/2017 - Operating hours: approx. 2,000 h - Control unit: Touchscreen monitor with computer (Windows) The CNC Rotary Head Sewing System KSL110-Headbag is a powerful industrial sewing system designed for demanding safety, functional, and decorative stitches. Manufactured in 2017, this model is characterized by its robust construction. Nwsdpfx Aeyxnl Sehvod The machine is housed in a grey and white aluminum cabinet that appears clean and well-maintained, indicating careful use. This advanced CNC sewing system offers a sewing area of 2,500 mm x 800 mm and operates with a 2-needle double lockstitch system. It supports a maximum sewing speed of 2,800 stitches per minute and a maximum stitch length of 12 mm. The sewing head is pneumatically liftable by 75 mm, allowing direct access to any seam position, and features a 360° rotating head with alternating double feed, ensuring perfect seam results in multi-directional sewing processes. It is particularly suitable for demanding and industrial sewing applications that require high precision and reliability.

Condition: used, mileage: 311,665 km, power: 309 kW (420.12 HP), first registration: 08/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #612 MAN TGS 26.420 6x2-4 BL Kroll ADR Vacuum/Pressure Tank Vehicle Type K 1.5 - 14.0 / 36 PESP This MAN TGS 26.420 6x2-4 BL is equipped with a robust KROLL vacuum/pressure tank superstructure in ADR class L4BH. With a 14,000-litre tank, discharge piston, plasma-nitrided VacuStar W1300, Speck NP45/85-160, and practical features such as a scrap box, ladder, and hose tray, this vehicle is optimally suited for demanding industrial and waste management operations. Superstructure: • Manufacturer: KROLL • Tank material: S355J2+N (7 mm) • ADR vacuum/pressure tank K 1.0–14.5 / 36 PESP • Permissible operating overpressure: -1 / +0.5 bar Nwedpfx Ahsyxkcgsved • Tank volume: approx. 14,000 l (air volume) • Emulsion chamber ahead of piston • Rinse water chamber: approx. 1,500 l, non-pressurised • Discharge with ejection piston Chassis: • MAN TGS 26.420 (6x2-4 BL) • TipMatic • 420 HP / 309 kW • EURO 6 • Diesel tank: 400 l • Chassis colour: RAL 9011 Graphite Black • Cab colour: RAL 2004 Orange • 2 × LED beacons • Reversing camera • Navigation • Air conditioning Vacuum system: • CVS VacuStar W1300 – approx. 1,200 m³/h at 400 mbar • Plasma-nitrided version (increased wear resistance) • Hose reel for approx. 40 m DN80 suction hose at end of body High-pressure system: • Speck NP45/85-160 – 85 l/min at 160 bar • Small hydraulic HP hose reel • Equipped with approx. 60 m DN13 rinsing hose Special features: • ADR L4BH incl. EX/II, EX/III & AT • Tiltable scrap box • Ladder with holder • Advertising boards on both sides of the tank • Toolbox on the right • Open hose tray on the left Technical data: • GVW: 26,000 kg • Unladen weight: 15,700 kg • Length: 9,100 mm • Height: 3,600 mm • Width: 2,550 mm Conclusion: A reliable MAN TGS 26.420 with KROLL vacuum/pressure tank superstructure, 14,000-litre tank, VacuStar W1300, Speck NP45 high-pressure system and complete ADR L4BH equipment. Ideal for industrial, sewer, and waste management companies seeking a robust and immediately operational vehicle. For further detailed information and/or pictures, please contact us directly. You can find a wide selection of additional vehicles for PURCHASE or RENTAL at: Subject to modifications, prior sale, and errors. The purchaser is responsible for independently verifying the condition and equipment of the goods. Sale is made exclusively according to our general terms and conditions and to the exclusion of any warranty.

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,710 mm, loading space volume: 13 m³, Year of construction: 2023, Equipment: navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #302 MAN TGS 26.470 6x2 -4 BL Kroll ADR suction/pressure tanker K 1.0-13.5 /36PESP Body* KROLL * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tanker K 1.0-13.5 /36PESP * Approx. 13,500 liter tank size (air volume) * Approx. 11,200 liters sludge volume (max.) 4580 liter emulsion chamber * Approx. 1,000 liters rinsing water volume (unpressurized) * Emptying with ejector piston Chassis* MAN TGS 26.470 * 6x2 - 4BL * TipMatic * 470PS/346KW * EURO 6e * Fuel capacity 400l * Chassis color RAL 9010 pure white * Color cab RAL 9010 pure white * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning Njdpjyxkcmsfx Ahvowd Vacuum system* CVS VacuStar W1300 approx. 1200cmb/h at 150mbar * Suction hose storage cassette with telescopic boom (180°) High pressure system* Speck P52/100-150 100l/min at 400mbar * Small hydraulic HP hose reel for approx. 60m DN 13 hydraulic * Approx. 60m DN 13 flushing hose Special features* ADR version L4BH type class FL incl. EX/II, EX/III and AT * Suction connection pre-piston chamber DN100 upper suction connection remote-controlled. * Suction hose storage cassette * DN 500 manhole on the left side * HP gun * Noise protection cladding in front of the pumps left and right * Removable and swiveling halogen work lights * LED ambient lighting * Radio remote control with two batteries * Tiltable scrap box * Ladder with bracket and anchor points * Advertising panel on the left and right of the container Technical data* GGW 26,000KG * Length 9,400mm * Height 3,710mm * Width 2,550mm * Wheelbase 4,200mm For more detailed information and/or pictures please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to alterations, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: used, mileage: 215,000 km, power: 350 kW (475.87 HP), first registration: 05/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, total width: 2,510 mm, total height: 3,960 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal No.: #627 Mercedes Benz Arocs 2848 6x4 Müller Water Recycling Unit Body: Müller Umwelttechnik – Water Recycler “Helicopter” Tank material: S355J2+N (St. 52.3) Total volume approx. 13,000 l Tank split: * approx. 5,000 l sludge * approx. 8,000 l flushing water DISCHARGE: Tank emptied via corresponding discharge system, manhole present HELICOPTER Boom System Original Müller Helicopter boom arm: Nsdoyxkcaopfx Ahvewd * Centrally mounted on top of the tank * Telescopic * Integrated suction and jetting hose guidance * Provides comfortable and ergonomic operation * Optimal hose management for sewer cleaning operations * Highly flexible reach with boom system Jetting hose: * 280 m DN 25 (1") Additional hose systems: * Suction hose reel mounted on the tank * Jetting hose reel at the front of the tank * Meter counter included * approx. 60 m rubber hose * approx. 15 m ¾'' rubber hose Chassis Mercedes Benz AROCS Axle configuration 6x2 Engine power approx. 500 HP Emission standard EURO 6 Mileage 214,088 km Fuel tank approx. 500 l Cab color: Orange Features: * Air conditioning * Rear view camera * Warning beacons * LED work lights Max speed: 90 km/h Vacuum system CVS VacuStar WR 3100 Capacity approx. 3,100 m³/h Pump type: water ring pump Driven via vehicle engine PTO Functions: * Sludge water can be displaced via suction hose * Water chamber can be filled via suction hose * Suction hose mount available High-pressure system URACA P3-45 Capacity: approx. 348 l/min at 250 bar Special features Original Müller Helicopter boom system, radio remote control, display control, equipment cabinets on both sides with roller shutters, hose trays, toolbox, vice, hand wash station, sound insulation for pump compartment, stainless steel waste bin/scrap box, LED work lights (2 per side), warning beacons, rear view camera, advertising boards left and right on the tank Technical data Gross vehicle weight: 21,090 kg Length: 9,890 mm Width: 2,510 mm Height: 3,960 mm For more detailed information and/or images, please contact us directly. A wide range of other vehicles for SALE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively according to our T&Cs and excluding any warranty.

Condition: used, Year of construction: 2009, machine/vehicle number: PR22, Used injection molding machine H160 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-efficiency cap and closure production, making it an excellent choice for beverage production environments that require consistent, high-quality outputs. Manufactured in 2009, the unit features a 160-ton clamp force platform paired with a 24-cavity cap mold optimized for 29/25 mm neck finishes. It is supplied with robust auxiliary equipment to stabilize process conditions and streamline operation in an industrial packaging workflow.Manufacturer: Husky Injection Molding SystemsModel: H160 RS45/42Year: 2009Application: Cap/closure molding for beverage packagingMold cavitation: 24 cavitiesClosure specification: 29/25 mm, Free Start CapNominal part weight: 1.20 g (cap)Clamp force: 160 tonsElectrical supply: 400 V, 50 Hz, 3PH+N+PEMain supply current: 101 ALargest motor load: 42 ALargest heat load: 31 AShort-circuit current rating (SCCR): 10 kAIncluded equipment: Altanium heater controller, mold dehumidifier, hopper loader, color mixer unit, available spare partsAdvanced Automation & Control SystemsThe machine is equipped with an Altanium heater controller to deliver precise thermal management across the hot runner zones. This tight temperature control promotes uniform melt flow, faster startups, and reduced scrap, vital for thin-wall cap molding. The industrial control panel supports a 3-phase + neutral + protective earth electrical system, with clearly defined load ratings for motors and heating circuits to facilitate safe integration and predictable operation.Precision heater control with Altanium technologyClearly rated electrical distribution for motors and heatersStable process conditions for consistent cap qualityDesigned for quick setup and repeatable mold changeoversProduction Line Integration CapabilitiesThis unit integrates seamlessly into cap and closure production cells serving a used bottling line or standalone cap manufacturing operations. It can feed downstream systems such as vision inspection, lining/printing, and bulk handling for PET bottle closures. The 29/25 mm specification aligns with common beverage packaging neck finishes, supporting high-throughput operations in industrial packaging environments.Standalone or inline operation with downstream handlingCompatible with PET bottle packaging for beverage productionAuxiliaries included to stabilize material handling and color dosingMachine Condition & Maintenance HistoryThe machine is indicated as still in production, reflecting ongoing operational status and functional readiness. The inclusion of a comprehensive set of available spares and auxiliary units supports routine maintenance, uptime, and rapid troubleshooting typical of second hand i... Nwsdpfx Ahjyhbdxevod

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, total length: 7,700 mm, total width: 2,300 mm, total height: 3,900 mm, overall weight: 14,000 kg, warranty duration: 12 months, hopper volume: 2,500 l, Equipment: AdBlue, Ideal for construction debris, concrete, bulky materials, asphalt, roofing felt, wood, mixed waste, biomass, rubber, plastic, ceramics, photovoltaic panels. The offer includes a turnkey machine price: this covers any shaft of choice, bidirectional cleaning fan, crossbelt scrap magnet, water spray system, scrap container, and training! Nsdpfoyk Tw Ajx Ahvowd