Used Scrap Baler for sale (601)

Condition: excellent (used), Tuschier Straightedge (28691) Bedoymmfljpfx Ablewp 90° Prisms Length: 1000 mm Leg length: 85/120 mm Weight: 29 kg

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Bwedpfx Asphvl Teblop Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Year of construction: 2011, condition: used, functionality: unexamined, Scraper conveyor for sale. The conveyor consists of two sections – a horizontal and an inclined part. Length of the horizontal section: 6,870 mm, length of the inclined section: 5,120 mm, outer width: 1,580 mm, outer height: 1,780 mm, inner width: 1,270 mm, inner height: 1,090 mm, drive motor: 5.5 kW, slat pitch: approx. 280 mm. The conveyor is dismantled and ready for transport. The machine can be inspected at: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland. Bjdpfx Abjwxb Tpjlowp

Condition: new, Scraper in PE - HD, color red, resistant to hot water, high density, rigid For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Handle length: 210 mm Width 125 mm Bsdpfx Ajd Eygpjblowp

Condition: new, Product: Scraper in PE - LD Color: white, extra soft and very flexible Bwedped Eykzsfx Ablop Other: For process engineering in the field of filter presses. to remove the filter cake Length: 410 mm Handle length: 210 mm Width: 125 mm

Condition: new, Scraper in PE - MD, color blue in semi-hard, somewhat flexible design. For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Handle length: 210 mm Bodpfjd Ey Rwsx Ablswp Width 125 mm

Condition: new, Scraper in PE - MD, color blue in semi-hard, somewhat flexible design. For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Handle length: 210 mm Width 125 mm Bedjd Eyfpepfx Ablewp

Condition: new, Product: Scraper in PE - MD Bwjdpod Eyikofx Ablep Color: orange - semi-hard and flexible Other: For process engineering in the field of filter presses. to remove the filter cake Length: 410 mm Handle length: 210 mm Width: 125 mm

Condition: new, Scraper in PE - HD, color red, resistant to hot water, high density, rigid For process engineering in the field of filter presses. to remove the filter cake. Length: 410 mm Bwodpfxod Ey R Ns Ablsp Handle length: 210 mm Width 125 mm

Year of construction: 1994, condition: used, Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available Bwedpfx Abju Drugjlop -Dimensions: 460/430/H560 mm -Weight: 57 kg

Condition: good (used), Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang -with scanning of 2 sides each -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm Bsdjb Sc Stepfx Abljwp -Weight: 60 kg

Condition: used, Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø22/25 x 215 mm -Dimensions: 315/65/H85 mm Bjdequx Nzepfx Ablswp -Weight: 1.9 kg

Condition: good (used), Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available -Dimensions: 510/430/H570 mm Bwedpfegylq Sox Ablsp -Weight: 62 kg

Condition: ready for operation (used), Year of construction: 1998, Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible. Bwodpfxjvf Iz Us Ablsp

Year of construction: 1989, condition: ready for operation (used), Max. Operating pressure: 20 bar, max. temperature range: 120°C. Bwjdpotphubefx Ablep

Condition: good (used), functionality: fully functional, We offer a used Liebherr scraper, Bjdsrpmlropfx Abljwp semi and fully automatic. Fully functional, with control system.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Two used TEKA scrapers are offered. 1. THS 4020, built in 2009, scraper arm: 16.00 m, 2. THS 6022, built in 1993, scraper arm: 16.00 m. Fully functional. For further information, see the rating plate. Bwjdpfx Asv Tb A Ieblsp

Condition: new, Scraping blades are used as tools for various purposes, including fine removal of chips, removal of old paint layers, and cleaning of soiled surfaces. When purchased, scraping blades are usually not immediately usable; they are simply a piece of steel sheet. To make them functional, a fine edge must first be ground. We offer fully functional, new scraping blades made of Swedish steel in thicknesses of 0.4 mm and 0.5 mm. If required, we will gladly grind your "used" or "new" scraping blades and restore them to a functional state. Bwedpfx Ajftm Sleblep Contact us. We will be happy to provide you with a quote for new scraping blades, either ground or unground, and/or a grinding service. We would be pleased to provide you with further information regarding scraping blades.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder Bsdpjyzr Nmsfx Abljwp • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 01113, total width: 2,180 mm, total length: 12,200 mm, bale length: 500 mm, bale height: 400 mm, pressing force: 350 t, overall weight: 34,000 kg, Ecotecnica shear baler mod. 2535, year 2013, with approximately 5,000 operating hours, in good working condition and complete with documentation. Machine suitable for compressing and shearing ferrous scrap, including sections, sheet metal, and mixed scrap. Technical data: Shear force: 350 tons Bjdpfjy Ibw Tox Ablewp Operating hours: 5,000 Compression box length: 5.0 m Box width with wings open: 1.70 m Bale size: 500 x 400 mm Total length: 12.20 m Width: 2.18 m Weight: 34,000 kg Equipment: Iveco diesel engine, 172 HP Radio remote control Complete documentation Machine is fully functional and ready to use. Inspection and testing possible.

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, cutting force: 900 t, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Bwodpfxjxg Ekfj Abljp

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design Bods Ry Hujpfx Abljwp High-performance pneumatic cylinder Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine

Year of construction: 2026, condition: as good as new (ex-display), The BTS-Tyre Packing Machine Gen.2 is ideal for used tyre companies with large tyre volumes. The triple machine is the perfect solution for cost-effective disposal or resale of second-hand tyres. By doubling or tripling the tyres you achieve an enormous volume reduction, the available storage and loading capacity, as well as the permissible transport weight can be used much more efficiently. Pressing cylinder: Pneumatic Pressing force: 1.23 kN, adjustable Machine size: 1250 H x 1930 W x 660 D mm Machine weight: 93 kg Transport size: 1250 H x 1200 W x 800 D mm Working height: 800 - 1020 mm, adjustable Power supply: Air, up to 10 bar / 145 Psi Working pressure: 6 - 8 bar User-friendly and safe two hand control Strong and long-life design High-performance pneumatic cylinder Bsdpfsb Rz R Usx Ablewp Ball bearing roller guides Adjustable working height Low noise level by silencer Air quick connector A quality product “Made in Germany” Suitable for doubling and tripling Second-hand tyres Optional extras Machine colour RAL BTS-MF550HD Scrap Tyre Baler Demo-Video shows BTS-Tyre Packing Machine Gen.1, the BTS-Tyre Packing Machine Gen.2 operates on same way. Tyre packing machine, Tyre triple machine, Tyre double machine, Tyre doubler, Tyre tripler, Tyre packer, Tire packing pachine, Tire tripling machine, Tyre doubling machine, Tire doubling machine

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,250 kg, total width: 820 mm, total length: 1,650 mm, total height: 1,600 mm, cutting force: 100 t, pressure: 160 bar, warranty duration: 12 months, year of last overhaul: 2026, power: 7.5 kW (10.20 HP), MIZAR ALS Series - Hydraulic Alligator Shear / Crocodile Shear for Scrap Metal & Cables High-Precision Hydraulic Cutting for Scrap Cables & Metals The MIZAR ALS Series is engineered for powerful and reliable hydraulic cutting of scrap cables, aluminum, copper, and various metal profiles. Designed for durability and operational safety, ALS shears deliver consistent cutting performance in demanding recycling environments. ENGINEERED FOR INDUSTRIAL PERFORMANCE & ADVANTAGES • Advanced Hydraulic System: Equipped with a premium Bosch Rexroth hydraulic system to ensure stable pressure, smooth and fast operation, and a long service life. • Hardened Cylinder Shafts: Induction-hardened and chrome-plated cylinder shafts provide superior wear resistance and corrosion protection, ensuring continuous performance under heavy-duty conditions. • High-Strength Blade Technology: Specially processed, high-alloy tool steel blades offer high cutting efficiency and an extended blade lifetime, significantly reducing maintenance frequency. • Industrial-Grade Electronics: All electrical and electronic components are powered by Siemens, ensuring maximum operational reliability and global service availability. Fully CE and EAC certified for international compliance. APPLICATION AREAS • Cable Recycling: Scrap copper and aluminum cables, heavy-duty wire harnesses. • Non-Ferrous Metals: Aluminum profiles, extrusions, and window frames. • Heavy Scrap: Copper busbars, conductor bars, and industrial metal offcuts. • Light Metal Scrap: General metal cleaning and preparation for further shredding or smelting. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material type and capacity) • ALS S1: Compact and efficient solution for medium-capacity operations. • ALS M1: Extended cutting capacity for larger cross-sections and higher throughput requirements. Bwedpfxed Exv Hs Ablop Why MIZAR ALS Series? • High hydraulic stability and precision cutting • Long blade lifetime with low maintenance costs • Safe and operator-friendly design (foot-pedal operated) • Plug-and-play installation for immediate use • Built for continuous industrial recycling environments Need a cutting solution tailored to your material? Contact us for a customized quotation, technical details, or send your material for a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,300 kg, total width: 820 mm, total length: 1,650 mm, total height: 1,600 mm, cutting force: 100 t, pressure: 160 bar, warranty duration: 12 months, year of last overhaul: 2026, power: 7.5 kW (10.20 HP), MIZAR ALS Series - Hydraulic Alligator Shear / Crocodile Shear for Scrap Metal & Cables High-Precision Hydraulic Cutting for Scrap Cables & Metals The MIZAR ALS Series is engineered for powerful and reliable hydraulic cutting of scrap cables, aluminum, copper, and various metal profiles. Designed for durability and operational safety, ALS shears deliver consistent cutting performance in demanding recycling environments. ENGINEERED FOR INDUSTRIAL PERFORMANCE & ADVANTAGES • Advanced Hydraulic System: Equipped with a premium Bosch Rexroth hydraulic system to ensure stable pressure, smooth and fast operation, and a long service life. • Hardened Cylinder Shafts: Induction-hardened and chrome-plated cylinder shafts provide superior wear resistance and corrosion protection, ensuring continuous performance under heavy-duty conditions. • High-Strength Blade Technology: Specially processed, high-alloy tool steel blades offer high cutting efficiency and an extended blade lifetime, significantly reducing maintenance frequency. • Industrial-Grade Electronics: All electrical and electronic components are powered by Siemens, ensuring maximum operational reliability and global service availability. Fully CE and EAC certified for international compliance. APPLICATION AREAS Bwsdpfxjyyuptj Ablep • Cable Recycling: Scrap copper and aluminum cables, heavy-duty wire harnesses. • Non-Ferrous Metals: Aluminum profiles, extrusions, and window frames. • Heavy Scrap: Copper busbars, conductor bars, and industrial metal offcuts. • Light Metal Scrap: General metal cleaning and preparation for further shredding or smelting. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration based on your material type and capacity) • ALS S1: Compact and efficient solution for medium-capacity operations. • ALS M1: Extended cutting capacity for larger cross-sections and higher throughput requirements. Why MIZAR ALS Series? • High hydraulic stability and precision cutting • Long blade lifetime with low maintenance costs • Safe and operator-friendly design (foot-pedal operated) • Plug-and-play installation for immediate use • Built for continuous industrial recycling environments Need a cutting solution tailored to your material? Contact us for a customized quotation, technical details, or send your material for a performance test. Mizar Recycling Machinery