Used Scan Max for sale (26,142)

Condition: new, maximum load weight: 48,010 kg, overall weight: 66,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpts from the equipment list are detailed below. Full equipment details on request. Gooseneck: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6x4 or 8x4 Low-bed: * Low-bed with external beams, extendable design, SUPER LOW design, approx. 7,550 mm long * Low-bed with fixed hardwood floor, approx. 40 mm thick, and mechanical lock * Supply lines run protected in the extendable beams and automatically adjust to the respective low-bed length * 7 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings Rear undercarriage: * Rear axle assembly with closed outer frame, checker plate surface and continuous prism excavator recess, approx. 1,450/900 x 505 mm, open at the rear * 2 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 1 pair of lashing rings, horizontal in the recess (approx. LC 10,000 daN) * 2 pairs of lashing rings, horizontal in the recess (approx. LC 16,000 daN) * 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE AXLE: * PENDLE AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function Fsdpfx Aexbmpredpefw * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Axle tools Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of our choice * Load index (146/146F) Braking system: Wabco brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Painting: * Complete steel structure automatically shot blasted with throw wheel system after welding * Second blasting using corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure the best corrosion protection * Final painting: 2 layers of 2K topcoat, single-color RAL 3002 Carmine Red per RAL system 841GL Including the following accessories: * Preparation for the mounting of bolted container positions for 1x 20' or 1x 40' container on the external beams * Without container locks * 3.5 inch king pin * One galvanized steel front wall, approx. 400 mm high * Remote steering operation by cable at front and rear with push-button control, including single-track control of axles (installation in the tractor unit not included) * Electro-hydraulic unit * On the gooseneck: plug-in aluminium side walls and tailgate, approx. 2,000 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable (body length approx. 2,120 mm) * Hydraulic connections from gooseneck to low-bed with multi-coupling instead of threaded couplings. No guarantee for seals * On the gooseneck, a separate air connection with air gun * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck * 2 pairs of screwable lashing rings M20 (LC 5,000 daN) * 2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) * Folding extensions, approx. 230 mm wide per side, extension planks made of hardwood. The maximum load is on an area of approx. 200x2

Condition: new, maximum load weight: 36,360 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear slope approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing laths approx. 15 x 15 mm, including extensions at the bottom * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the slope and extending into the platform for accommodating an excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cut-outs in the platform's outer frame for attaching tie-down straps (LC 2,000 daN) Two-Piece Steel Ramps: * One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically folding ramp sections and hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing Gear: JOST landing gear (mechanical) with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated automatically by reverse gear and manually * Air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer of our choice Fodsyhkq Uopfx Adpsfw TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection * Final paintwork with two coats of 2K topcoat, solid RAL 3002 Carmine Red, in accordance with RAL System 841GL * Wheel rims in silver grey Incl. the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic power unit at the rear, under the loading platform * On the gooseneck: plug-in aluminum drop sides and tail board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable (body length approx. 2,560 mm). * One galvanized toolbox integrated in the gooseneck chamfer * 2 pairs of WADER container pockets on the loading platform for a 20' or 30' container * 3 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * 3 additional pairs of removable galvanized covers over the wheel recess – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hook-on intermediate table, approx. 300 mm wide * Intermediate table with offset load ar

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Fsdeyhkrropfx Adpefw Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley Fodpfx Adoyhkqzjpofw * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: used, Thickness planer: Max planing width: 400 mm Max planing height: 240 mm Min length of planed workpiece: 200 mm Cutter shaft diameter: 700 mm Ffsdpfxexwvqdo Adpjw Number of knives: 3 Cutter shaft speed: 5000 rpm Manual adjustment of working height Jointer: Total table length: 1810 mm Adjustable tables Cutter shaft noise suppression Cutter shaft guard Extraction port: 2x120 mm Tilting fence Supply voltage: 400 V Motor power: 5 kW Overall dimensions: Length: 2030 mm Width: 800 mm Height: 1160 mm

Condition: excellent (used), Year of construction: 2008, operating hours: 58,001 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Equipment: documentation/manual, Due to recent developments - Tax notice and advantage for used machines From 01.07.2025, used machines may also benefit from a special depreciation allowance of 30% per year. In addition to the more favorable price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Fjdpfxjt A Ufwo Adpefw Keyword: Growth Booster (§ 7 Paragraph 2 German Income Tax Act - draft) Engel E Max cleanroom machine, year 2008, including GEKU SR 500 ST linear robot The machine has operated just under 58,000 pump hours in automatic mode. The machine comes from a well-known pharmaceutical manufacturer, which means both the machine and the handling system were subject to very strict maintenance management and are in excellent condition. We provide a commissioning warranty for every machine purchased from us.

Condition: used, mileage: 109,050 km, power: 125 kW (169.95 HP), first registration: 01/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,046 mm, total width: 2,035 mm, total height: 2,293 mm, loading space length: 3,400 mm, loading space width: 1,850 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 4697 ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide. Always over 400 vehicles immediately available at the best prices under . Largest selection – lowest prices. More than 1,000 satisfied customers per year – top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Top Condition! First owner, German vehicle, non-smoker vehicle Full service history exclusively with Mercedes Benz Next service due in 644 days Brake pads in new condition, front and rear Automatic transmission Body: Deep-freeze box Thermo King V500 MAX Refrigerant R-404A Standby cooling + engine-powered cooling According to the manufacturer (Thermo King), the refrigeration unit can ideally reach temperatures down to max. -20°C. Whether this is achieved depends heavily on usage and circumstances and is not guaranteed (loading area size, insulation, frequency of door openings, ambient temperature, etc.). MBUX multimedia system (7" touchscreen) Navigation system for MBUX multimedia system Cruise control Active lane keeping assist Traffic sign recognition Attention Assist (fatigue detection sensor) Inductive smartphone charging tray (wireless charging) Automatic climate control (Tempmatik) Instrument cluster with color display Comfort driver's seat Rear portal doors ---- Special equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel Ffedpfxeyg T Rho Adpew * 1 DIN slot front under roof lining * 2nd battery (auxiliary battery) in cab * 3-button remote for central locking * Acoustic package * 13-pin trailer socket * Armrest, driver and passenger door * 1-pole battery isolator switch * DAB tuner (digital radio reception) * Driving assistance system: active lane keeping assist * Driving assistance system: Attention Assist (fatigue detection sensor) * Driving assistance system: traffic sign recognition * Chassis: stabilization level II * Electric parking brake * All-weather floor mats * 250 A alternator * Cruise control * Front cup holders * Grab handle, co-driver double seat (inside seat) * Grab handles, A-pillars * Additional main key * Inductive smartphone charging tray (wireless charging) * Flip-up lid for storage compartment * Flip-up lids for left/right storage compartments * Terminal strip for electrical connections (driver's seat base) * Automatic climate control (Tempmatik) * Instrument cluster with color display * Fuel tank: main tank 93 liters * Loading package, dashboard (additional USB ports and 12V socket) * Front engine PTO with bracket for additional coolant compressor * Navigation system for MBUX multimedia system * Fog lights with cornering function * Full wheel covers * Smoker's package * Spare wheel in running gear * Spare wheel holder under rear frame incl. jack * Windscreen wipers with rain sensor * Front mud flaps * Seat belt warning system (co-driver side) * Seat equipment: comfort headrest, driver's seat * Cab seats: co-driver double seat * Cab seats: comfort driver's seat * Cab seats: driver's seat with lumbar support * Lockable storage compartment above windscreen * Socket (12V) in the cab * Red fuel cap * Cut-off relay with battery

Condition: used, mileage: 388,216 km, power: 368 kW (500.34 HP), first registration: 03/2022, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, parking heater, EURO6 ABS, ASR, Fedpfjyg Tyvex Adpofw emergency brake assistantlane, lane keeping system 38 liter food coolerterrain, monitoring cruise control // connect truck

Condition: used, mileage: 341,264 km, power: 368 kW (500.34 HP), first registration: 06/2021, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, parking heater, EURO6 ABS, ASR, emergency brake assistantlane, lane keeping system 38 liter food coolerterrain, monitoring cruise control // connect truck Fodpfsyg Tx Sex Adpjfw

Condition: used, mileage: 329,952 km, power: 368 kW (500.34 HP), first registration: 11/2021, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, parking heater, EURO6 ABS, ASR, emergency brake assistantlane, lane keeping system 38 liter food coolerterrain, Fsdpfxjyg Tyij Adpjfw monitoring cruise control // connect truck

Condition: used, mileage: 113,077 km, power: 232 kW (315.43 HP), first registration: 08/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, 1344Bh 4/25 Left-hand drive, differential lock, steered/liftable trailing axle, stop brake for waste collection vehicle, 3-seater, ASR, ADR, central locking, speed limiter 30/85 km/h, radio, rotating beacons, pop-up roof, decorative inlays, armrests, sun blind, cornering light, daytime running light, LED position lights, emergency brake signal (ESS), Brake Assist 2, Lane Guard System 4, HS turning assistant, Olympus Industrial 23 m³ with HS dumping hopper Comfortlift type U-K-KL EuroMax, suitable for 80 l to 5 m³, bulky waste collection with foldable chute, comfort gearshift, central lubrication system, hopper lifts approx. 2 t, Welvaarts scales Ffsdpfx Adowcikqspjw

Condition: good (used), Year of construction: 2022, functionality: fully functional, We are offering our Kornit Atlas Max, built in March 2022, for sale. The machine is first-hand, has always been well-maintained, and regularly and professionally serviced under a maintenance contract. Machine details: • Model: Kornit Atlas Max • Year of manufacture: March 2022 • Location: Germany • First-hand • Regularly serviced (maintenance contract in place) • Very good condition - fully functional and ready for use • Excellent print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer need the Kornit Atlas Max. We have always been very satisfied with the machine and can fully recommend its reliability and performance. Additional information: • The Kornit Atlas Max is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print jobs. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Included in delivery: • Kornit Atlas Max DTG printer • Maintenance records and documentation • Original accessories A viewing and demonstration of the machine is possible at any time by arrangement. You are also welcome to conduct a test print on-site to see the print quality for yourself. If you are interested, we look forward to hearing from you! An excellent offer for anyone looking for a powerful and reliable DTG printing machine! ----- We are offering our Kornit Atlas Max, manufactured in March 2022, for sale. The machine is first-hand, has been well-maintained, and has been regularly and professionally serviced under a maintenance contract. Machine Details: • Model: Kornit Atlas Max • Year of Manufacture: March 2022 • Location: Germany • First-hand ownership • Regularly serviced (Maintenance contract available) • Excellent condition - fully functional and ready for immediate use • Outstanding print quality and very high print speed Why are we selling the machine? We have expanded our production capacity and therefore no longer require the Kornit Atlas Max. We have always been very satisfied with the machine and can highly recommend its reliability and performance. Additional information: • The Kornit Atlas Max is ideal for producing high-quality textile prints in large quantities. • Perfect for companies specializing in on-demand production and custom print orders. • The machine uses environmentally friendly, water-based inks and is OEKO-TEX certified. Ffedpov Sci Tsfx Adpsw Included in the sale: • Kornit Atlas Max DTG Printer • Maintenance documentation and records • Original accessories Inspection and demonstration: An inspection and demonstration of the machine can be arranged at any time by appointment. We are also happy to perform a test print on-site to demonstrate the excellent print quality. Price and Contact: If you are interested, we look forward to hearing from you! A fantastic opportunity for anyone looking for a powerful and reliable DTG printing machine!

Condition: used, maximum load weight: 38,440 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available upon request. - Loading area with rear taper approx. 1,000 mm x 8° - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm - JOST landing legs (mechanical) with 2-speed gearbox rated for approx. 24 t lifting capacity (approx. 50 t test load) - BPW axles and suspension, 1 axle self-steering - Technical axle load: 12,000 kg each - Air suspension with raise/lower valve - Topcoat in solid RAL 3002 carmine red - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high Ffedpexthz Tofx Adpsw - Electro-hydraulic unit mounted at the rear under the loading area - Load gauge for determining axle loads, including load chart - On the gooseneck: removable ALU side walls and rear wall, approx. 2,440 x 400 mm (L x H) - One galvanized toolbox, integrated in the tapered gooseneck - 6 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area - Galvanized extensions, extendable by approx. 230 mm per side - Lift axle on the 1st axle - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - 2 LED reversing lights mounted on the rear plate - HRM metallisation (High Resistance Metallisation)

Condition: used, power: 368 kW (500.34 HP), fuel type: diesel, empty load weight: 19,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, PRIVATE NEGOTIATION. The price does not include VAT, registration tax (IPT), and pre-delivery costs (MSS). VEHICLE OPTIONS: - PTO (power take-off); - ADR (dangerous goods approval) Offer valid for contracts and/or registrations finalized by 28/02/2026, subject to approval. - We accept trade-ins of any vehicle, subject to evaluation. - Financing and leasing available for any amount, tailored to customer requirements. We are EXPERTS in remote negotiations, offering you the best solution to purchase our vehicles even if you are located far from the Province of Bergamo. Please verify the specifications of the listed vehicle. Lodotruck s.r.l. declines any responsibility for inadvertent discrepancies between the listing and the vehicle's actual specifications. If you are interested in the vehicle, please reply to the advertisement specifying: your city and telephone number. If you are offering a trade-in, please indicate: make, model, color, month and year of registration, mileage, main options, gearbox, power (kW/hp), and vehicle condition (preferably with attached photos). Ffsdpfxeq Rwyds Adpjw With this information, we can respond to you more quickly. Contact us at

Condition: used, power: 375 kW (509.86 HP), fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, VEHICLES ARRIVING WITH VARIOUS CONFIGURATIONS/70 /80. Offer valid for contracts and registrations up to 28/02/2026, subject to approval. - We accept trade-ins of any vehicle subject to appraisal. - Financing or leasing solutions available for any amount, tailored to customer requirements. We are EXPERTS in remote sales, offering you the best solution to purchase our vehicles even if you are located far from the Province of Bergamo. We invite you to verify the features of the advertised vehicle. Lodotruck s.r.l. accepts no liability for any unintentional discrepancies in the advertisement description. If you are interested in the vehicle, please reply to the ad with your city and telephone number. In case of a trade-in, please specify: make, model, color, month and year of first registration, mileage, main features, gearbox, KW/HP, and vehicle condition (preferably with attached photos). With this information, we can reply more quickly. CUSTOMER SERVICE HOURS: Ffjdjx Rd Itjpfx Adpow Monday to Friday: 8:30 am – 12:30 pm / 2:00 pm – 6:30 pm Saturday: 8:30 am – 12:30 pm Contact us at

Condition: good (used), The scope of delivery includes: 01x roller conveyor stand, used total width with foot plates: 475 mm Frame width: approx. 445 mm Height minimum: approx. 640 mm maximum height: approx. 870 mm total depth with foot plates: approx. 160 mm Frame profile dim.: C 80 x 35 x 12 mm connecting struts dim.: approx. 380 x 60 x 50 mm mounting plate dim.: approx. 140 x 135 x 3.00 mm Drill hole Ø: approx. 9 mm Drill hole spacing: approx. 100 mm Fsdpfxjilg Evo Adpsfw material thickness frame profile: approx. 2,50 mm Material color: sendzimir galvanized

Condition: good (used), The scope of delivery includes: 01x roller conveyor stand, used total width with base plates: 275 mm frame width: approx. 245 mm Fedsilg E Ispfx Adpsfw Height minimum: approx. 660 mm maximum height: approx. 900 mm total depth with foot plates: approx. 160 mm Frame profile dim.: C 80 x 35 x 12 mm connecting struts dim.: approx. 180 x 60 x 50 mm mounting plate dim.: approx. 140 x 220 x 3.00 mm Drill hole Ø: approx. 9 mm Drill hole spacing: approx. 100 mm material thickness frame profile: approx. 2,50 mm Material color: sendzimir galvanized

Condition: used, mileage: 415,893 km, power: 368 kW (500.34 HP), first registration: 04/2022, fuel type: diesel, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, parking heater, EURO6 ABS, ASR, emergency brake assistantlane, lane keeping system 38 liter food coolerterrain, monitoring cruise control // connect truck Ffsdow H U Nfjpfx Adpow

Condition: used, mileage: 443,215 km, power: 368 kW (500.34 HP), first registration: 08/2021, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, parking heater, EURO6 ABS, ASR, emergency brake assistantlane, lane keeping system 38 liter food coolerterrain, monitoring cruise control // connect truck Ffjdpfx Asxd I Rcjdpew

Condition: used, mileage: 337,569 km, power: 368 kW (500.34 HP), first registration: 03/2022, fuel type: diesel, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, parking heater, EURO6 Fjdsww R Slspfx Adpofw ABS, ASR, emergency brake assistantlane, lane keeping system 38 liter food coolerterrain, monitoring cruise control // connect truck

Condition: used, mileage: 284,866 km, power: 368 kW (500.34 HP), first registration: 03/2022, fuel type: diesel, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, parking heater, EURO6 ABS, Fsdpfx Adoygpwdjpofw ASR, emergency brake assistantlane, lane keeping system 38 liter food coolerterrain, monitoring cruise control // connect truck

Condition: used, mileage: 523,270 km, power: 368 kW (500.34 HP), first registration: 10/2022, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, ABS, ASR, double tank, air conditioning/climate control, fridge, Lane Keeping Assistance, Emergency Brake Assist Fedpfx Adewrk Ucopefw

Condition: used, mileage: 429,438 km, power: 368 kW (500.34 HP), first registration: 04/2021, fuel type: diesel, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, parking heater, EURO6 ABS, ASR, emergency brake assistantlane, lane keeping system 38 liter food coolerterrain, monitoring cruise control // connect truck Fodpfxexarfve Adpsfw

Condition: used, mileage: 387,424 km, power: 368 kW (500.34 HP), first registration: 10/2021, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ESP, ASR, double tank, fridge, independent heater, MaxCruise LKA - Lane Keeping Assistance Ffsdpfx Adjxy Unaepow EBA - Emergency Brake Assist

Condition: used, mileage: 479,946 km, power: 368 kW (500.34 HP), first registration: 03/2023, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, ABS, ASR, double tank, air conditioning/climate control, fridge, Lane Keeping Assistance, Emergency Brake Assist Ffjdjwrk Szepfx Adpew