Used Saw Mills for sale (14,430)

Condition: used, OTO MILLS Complete tube mill 168.7 With top of the range equipments OTO MILLS line, EUROLLS rolling, THERMATOOL welding, MAIR packaging machine, BLISSENBACH internal deburring, etc. COMPLETE Tube Mill 168.7 with: 1. OTO MILLS Entry line 2. OTO MILLS 168.7 Forming and sizing system 3. OTO MILLS Cutoff and runout system 4. Electrical and electronic parts 5. Hydraulic power units 6. EUROLLS Complete sets of tooling & spares 7. THERMATOOL HF welder CFI500 kW 8. FOERSTER Online eddy current 9. COTIMPI End facing unit | 6m to 12m length 10. COTIMPI 280 Bar hydro testing unit 11. FOERSTER Offline eddy current: Main bed with drive unit; Testing devices 12. MAIR Automatic packaging machine – Mps Rh200/D/6/Sl 13. BLISSENBACH Tube inside scarfing system – Tube Range I.D. 45 To 165mm Tube diameter: 60,3 – 168,2 mm Square sections: 50x50 – 140x140 mm Rectangular sections: 60x40 – 160x100 mm Thickness: 2,0 – 7,1 mm Tube length: 3 - 12 m Speed: 90 m/min Entry line: OTO MILLS Forming and sizing system: OTO MILLS 168.7 Cutoff and runout system: OTO MILLS Complete sets of tooling & spares: EUROLLS HF Welder: THERMATOOL 500 kW Online eddy current: FOERSTER End facing unit: COTIMPI 6m to 12m length Bar hydro testing unit: COTIMPI 280 Offline eddy current: FOERSTER Automatic packaging machine: MAIR Tube inside scarfing system: BLISSENBACH | Tube Range I.D. 45 To 165mm Ncsdpfxjxv Aace Alnju

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 351.10.001.16, functionality: fully functional, workpiece length (max.): 3,000 mm, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, drilling depth: 55 mm, TECHNICAL DETAILS Maximum horizontal drilling depth: 30 mm Maximum vertical drilling depth: 55 mm Horizontal spindles: 6 Vertical spindles: 9 Spacing between horizontal spindles: 32 mm Spacing between vertical spindles: 32 mm Maximum diameter of horizontal spindles: 15 mm Maximum diameter of vertical spindles: 8 x 15 mm, 1 x 35 mm Workpiece dimensions, X-axis: 280 - 3,000 mm Workpiece dimensions, Y-axis: 180 - 920 mm Nsdpfjzcdkwsx Alnjcu Workpiece dimensions, Z-axis: 10 - 50 mm Speed, X-axis: 25 m/min Speed, Y-axis: 25 m/min Speed, Z-axis: 15 m/min Motor power, drilling head: 1.5 kW Speed, drilling head: 3,600 rpm Speed, circular saw unit: 9,000 rpm Speed, milling spindle: 24,000 rpm Diameter of circular saw blade: max. 100 mm MACHINE DETAILS Operating/ambient temperature: 15–40 °C Humidity: max. 90 % at 20 °C Operating pressure: 6–8 bar Nominal compressed air consumption: 60 l/min Air consumption: 1,650 m³/h Diameter of compressed air supply: 5/8" Inner diameter: 16 mm Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,605 x 1,950 mm Weight: 850 kg Operating hours (estimated): approx. 800 h EQUIPMENT Additional support roller tables

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 3,000 rpm, controller model: HEIDENHAIN iTNC530, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range X-axis: 2,700 mm Travel range Y-axis: 1,000 mm Travel range Z-axis: 1,050 mm Nodozg Dq Depfx Alnecu Max. feed rate X/Y/Z: 10,000 mm/min Table dimensions: 3,300 x 1,000 mm T-slots: 7 x 22 2-axis diagonal milling head: 1 x 2.5 Spindle speed: 60 - 3,000 rpm Motor power: 22/30 kW Tool holder: ISO 50 (DIN69872-B) MACHINE DETAILS Control system: HEIDENHAIN iTNC530 Coolant pressure through the spindle: 19 bar EQUIPMENT Adjustable control panel in front of the machine Enclosure with front-facing doors Machine documentation Cooling and chip disposal Chain conveyor in the longitudinal direction

Condition: ready for operation (used), functionality: fully functional, power: 30 kW (40.79 HP), filling opening length: 600 mm, filling opening width: 500 mm, rotor diameter: 400 mm, rotor width: 600 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been completely overhauled! Robust shredding mill with high performance! TECHNICAL DETAILS Number of rotor blades: 5 Number of stator blades: 2 Rotor width: 600 mm Rotor diameter: 400 mm Infeed opening (W x L): 500 x 600 mm Ncjdpfx Alszdf Dnjnsu MACHINE DETAILS Drive power: 30 kW Suitable for: Plastics processing, recycling, and material recovery The screen size can be adjusted to customer requirements.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23022001, tilt adjustment saw blade: 45 °, workpiece width (max.): 80 mm, workpiece height (max.): 70 mm, main saw diameter: 350 mm, production capacity: 1,900 unit/h, This machine is an automatic double miter saw! TECHNICAL DETAILS Process stations: up to 6 Cutting angle: 45° Suitable materials: wood, MDF, strips, profiles, and aluminum, depending on the saw blade Cutting performance / production output Production output: 1,500 to 1,900 cuts/hour Cutting type: simultaneous double miter cut Workpiece dimensions Workpiece width max.: max. 80 mm Workpiece height max.: 70 mm Saw unit Saw blades: 2 x diameter 350 mm Cutting positions: 2 Saw blade position: 45° Feed / material feed Feed stroke max.: 1,200 mm Feed stroke optional max.: 1,600 mm Feed length max.: 3,200 to 6,200 mm Vertical feed length: 3,000, 4,000, 5,000, or 6,000 mm MACHINE DETAILS Motor power: 2 x 1.5 kW System: industrial pneumatic system Clamping system: vertical and horizontal pneumatic clamping Software version: 6.0.7.0 Operation: touchscreen, mouse, or external keyboard Programming methods: frame method and list method Production data: production reporting Extraction nozzle: 2 x diameter 80 mm Extraction: prepared for dust and chip extraction Control: PLC / control modules Control cabinet: industrial control cabinet with relays, transformer, circuit breakers, and cable ducts Cooling: forced ventilation Layout / installation dimensions / weight Installation length Layout 1: 6,282 mm Installation depth Layout 1: 1,100 mm Installation length Layout 2: 8,250 mm Installation depth Layout 2: 4,000 mm Installation length Layout 3: 13,952 mm Installation depth Layout 3: 9,000 mm Partial dimension Layout 2: 2,560 mm Partial dimension Layout 2: 2,490 mm Partial dimension Layout 2: 3,200 mm Machine weight: 550 kg EQUIPMENT Automatic double miter cut Vertical or horizontal material feed Nodpfx Alezdkttenocu Primary material gripper system Optional advanced material gripper system Speed-feed servo system Vertical and horizontal clamping device Unloading belt with ejector Kick-out conveyor Pneumatic transfer conveyor Touchscreen control Password-protected software platform Manual control of all machine commands Programming via frame or list method Simulation and visualization of cutting programs Cutting and material optimization Production data acquisition Operating panel with screen and indicators PLC / control modules Industrial relays Mean-Well power supply Transformer Circuit breaker Wiring in cable ducts Forced ventilation Industrial pneumatic actuators Tested connections and hoses Emergency stop Safety devices Prepared for dust and chip extraction

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,802 h, functionality: fully functional, machine/vehicle number: 12230000107, spindle speed (max.): 10,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl, laser power: 100 W, Highly accurate 5-axis milling, laser texturing, and laser paint removal on a precision machine! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 560 mm Main spindle speed range: 20 - 10,000 rpm Main spindle drive power: 13 / 9 kW Torque: max. 83 / 57 Nm Tool holder: HSK A63 according to DIN 69893 Table clamping surface: 800 x 650 mm Table load capacity: max. 600 kg Swivel range B-axis: ± 120° Rotational range C-axis: 360° T-slots: 9 x 14 x 63 mm Workpiece dimensions: max. 650 (840) x 500 mm Number of tool positions: 30 Tool weight: max. 6 kg Tool diameter: max. 80 mm Tool diameter with free neighboring pocket: max. 160 mm Tool length: max. 315 mm Tool change time (tool to tool): 1.6 s Tool change time (chip to chip): 8.0 s Rapid traverse: 40 m/min Feed force: 7 / 13 / 10 kN Ncjdszcxwrepfx Alneu Feed rate: 1 - 40,000 mm/min MACHINE DETAILS Control system: Siemens 840D sl Axes: 5 Total power consumption: 24 kVA Dimensions & Weight Footprint: approx. 4.5 x 3.5 x 2.3 m Machine weight: approx. 11.5 t Operating hours milling machine Spindle hours (according to counter): 4,738 h Power-on hours (according to counter): 18,703 h Operating hours laser Spindle hours (according to counter): 2,802 h Power-on hours (according to counter): 6,177 h EQUIPMENT Swiveling rotary table Laser head 100 W Coolant system Electronic handwheel Documentation

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,808 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, New auction due to buyer's payment default! TECHNICAL DETAILS Working Area Swinging diameter over bed max.: 920 mm Swinging diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Speed max.: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Speed max.: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Arbor cross-section: 25 mm Speed of driven tools max.: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & Weight Machine height: 2,000 mm Footprint: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,808 h Power-on hours: 11,311 h EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Nedpfxezck Txe Alnscu Parts catcher Workpiece ejector Interface for bar loader

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm Nedpfxozdfgps Alnocu B-axis rotation: 360° Table length: 1,500 mm Table width: 660 mm Tool holder: ISO40 Max. spindle speed: 10,000 rpm MACHINE DETAILS Control system: Fanuc 18i-MB Power: 38.4 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Operating hours: 10,197 h EQUIPMENT External coolant system Chip conveyor Tool magazine with 32 positions CE marking

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Nodpfozcwyljx Alnecu Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain iTNC 530, The previous owner of the machine was a well-established Formula 1 team from Central Europe! The milling head has been recently inspected by the machine manufacturer, is partially overhauled, and is fully functional. The machine has always been covered by a maintenance contract with the manufacturer. TECHNICAL DETAILS Travel range X-axis: 5,000 mm Travel range Y-axis: 3,000 mm Travel range Z-axis: 1,750 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Spindle speed max.: 20,000 rpm Axis acceleration: 5 m/s² Torque max.: 63 Nm Holding torque (clamped) A & C axis: 2,000 Nm Tool interface: HSK 63A MACHINE DETAILS Control system: Heidenhain iTNC 530 Handwheel: HR420 Spindle hours: approx. 37,000 h Power-on hours: approx. 83,000 h Spindle power: 20 kW Power consumption: 130 kW Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Footprint without peripherals (L x W x H): 7,500 x 8,500 x 6,600 mm Total weight: 90,000 kg EQUIPMENT 2-axis swivel milling head 5 Speed infinitely adjustable Minimum quantity lubrication 50-position tool changer Work area cover Note: The machine table is not included in the scope of supply, and the drive cables for the X, Y, and Z motors need to be replaced due to their age. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement. Ncsdpfx Ajzcqncjlnsu

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Nsdpfx Alszdrzxsnocu Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20355010, functionality: fully functional, cutting height (max.): 135 mm, cutting width (max.): 350 mm, saw blade diameter: 405 mm, spindle speed (max.): 3,800 rpm, table width: 780 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting width: 350 mm Max. saw blade height: 135 mm Min. saw blade diameter: 250 mm Max. saw blade diameter: 405 mm Saw blade bore diameter: 55 mm Min. workpiece length: 650 mm Max. spindle speed: 3,800 rpm Table width: 780 mm Min. feed rate: 7.5 m/min Max. feed rate: 30 m/min MACHINE DETAILS Conveyor belt motor power: 1.5 kW Conveyor belt width: 355 mm Voltage: 400 V Fuse rating: 63 A Njdezdz Rijpfx Alnscu Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,700 mm Weight: 1,500 kg Shipping packages: 1

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 441.12.292.18, functionality: fully functional, cutting height (max.): 137 mm, saw blade diameter: 400 mm, spindle speed (max.): 4,000 rpm, table width: 1,300 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 137 mm Max. saw blade diameter: 400 mm Saw blade arbor diameter: 30 mm Parallel fence travel: 1,300 mm Roller table length: 3,200 mm Table width: 1,300 mm Saw unit tilt: 0 - 45° Spindle speed, pre-cutter: 8,200 rpm Pre-cutter saw blade diameter: 120 mm Max. spindle speed: 4,000 rpm MACHINE DETAILS Main motor power: 5.5 kW Voltage: 400 V Current consumption: 11 A Fuse: 16 A Power: 5.5 kW Dust extraction nozzle diameter: 120 mm Dimensions & Weight Dimensions (L x W x H): 3,250 x 1,000 x 1,100 mm Shipping weight: 650 kg Shipping packages: 1 EQUIPMENT Scoring saw Njdpfx Ajzdz N Ejlnscu CE marking Controlled axes: Parallel fence, cutting height, swivel, scoring saw height Manually adjustable axes: Parallel fence, cutting height, swivel, scoring saw height

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 5014 BP, functionality: fully functional, cutting height (max.): 1,600 mm, saw blade diameter: 250 mm, empty load weight: 500 kg, cutting depth: 55 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height, vertical: 1,600 mm Max. cutting height, horizontal: 1,550 mm Max. cutting depth: 55 mm Max. saw blade diameter: 250 mm Arbor hole saw blade diameter: 30 mm Nsdpfx Alszdzy Rsnscu MACHINE DETAILS Voltage: 400 V Current consumption: 6.6 A Fuse: 16 A Power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,200 x 2,450 mm Weight: 500 kg Transport packages: 1 EQUIPMENT Horizontal cutting Vertical cutting

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15600600437, cutting height (max.): 130 mm, cutting width (max.): 470 mm, saw blade diameter: 550 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 130 mm Max. cutting width at 90°: 470 mm Max. saw blade diameter: 550 mm Saw blade tiltable up to: 45° MACHINE DETAILS Main motor power: 5.5 kW Voltage: 400 V Current consumption: 12 A Fuse: 16 A Power: 5.5 kW Ncedpjzdzmqefx Alnsu Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,600 x 1,700 mm Weight: 500 kg Transport packages: 1

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 8737, saw blade diameter: 500 mm, cutting width (max.): 300 mm, empty load weight: 1,100 kg, TECHNICAL DETAILS Max. cutting width: 300 mm Min. saw blade diameter: 490 mm Max. saw blade diameter: 500 mm Arbor saw blade diameter: 30 mm Infeed table length: 7,000 mm Outfeed table length: 2,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 10,000 x 1,800 x 1,700 mm Weight: 1,100 kg Shipping packages: 3 Voltage: 400 V Power consumption: 20 A Fuse: 32 A EQUIPMENT Nedpfjzdzkiex Alnecu Automatic feed system

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, table length: 1,200 mm, table width: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISO 50 Travel X-axis: 1,250 mm Travel Y-axis: 1,100 mm Travel Z-axis: 950 mm Travel W-axis: 630 mm Table size: 1,120 x 1,000 mm Table load capacity: 3,000 kg Ncodpfxozd Avys Alnju

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7853, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain TNC 426 C, No minimum price – guaranteed sale to the highest bidder! Loading can be carried out by the seller for €750! TECHNICAL DETAILS Travel in X-axis: 4,000 mm Travel in Y-axis: 1,200 mm Travel in Z-axis: 2,000 mm Spindle type: ISO 50 Spindle power: 50 kW Spindle speed: up to 3,000 rpm Table length: 5,000 mm Nodpfezdtxfsx Alnscu Tool changer: 30-position ATC MACHINE DETAILS Control system: Heidenhain TNC 426 C Headstock Swiveling: Automatic Increment: 1 degree / 2.5 degrees / stepless Dimensions & Weight Dimensions (L x W x H): 9,000 mm x 5,000 mm x 5,000 mm Weight: 35,000 kg EQUIPMENT Hydrostatic guideways in all axes Tool holders Coolant preparation/filtration system Chip conveyor Cooling system, manufacturer: Deerosdassi Control cabinet system Note: The machine has already been professionally disassembled and is in storage.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller model: DIXI CNC 4400, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Vertical movement with pallet changer (Y-axis): 880 mm Distance from spindle axis to top of table: 0 – 1,000 mm Distance from spindle axis to top of table with changer: 0 – 880 mm Ncjdpozd Rizsfx Alnsu Table dimensions without changer: 840 x 1,000 mm Table dimensions with standard changer: 800 x 800 mm Max. table load: 2,000 kg Max. table load with pallet changer: 1,200 kg Table rotation: 360° continuous Rapid traverse: 1,500°/min T-slots: 7 equally spaced slots, width 18 H7 Tool interface: ISO 50 Spindle speeds: 8 – 3,000 rpm (in 3 ranges) Drive power: 11 kW Drive power with overload: 13.75 kW Max. torque: 200 kpm Working feed rates (X, Y, Z): 1 – 9,999 mm/min Rapid traverse (X, Y, Z): 9,999 mm/min Measuring system resolution: +/- 0.001 mm / 0.001° Positioning accuracy: 0.001 mm / 0.001° Distance from table axis to spindle flange: 390 mm to 1,390 mm MACHINE DETAILS Control system: DIXI CNC 4400 Installed total power: 47 kW Compressed air requirement: 6 kg/cm² Dimensions & Weight Dimensions (L x W x H): 4,835 x 4,160 x 3,190 mm Machine weight: approx. 17 t Compressed air requirement: 6 kg/cm²

Condition: used, functionality: unexamined, machine/vehicle number: ML944E08, spindle speed (max.): 8,000 rpm, type of input current: three-phase, overall weight: 5,500 kg, input voltage: 400 V, CHEVALIER QP2033-L vertical machining center. The machine is available for inspection in Riga, Latvia. Nsdpfx Alezfgmxjnocu The machine is currently powered on and can be inspected by appointment. Additional photos and technical information are available upon request.

Condition: used, Sawing machine, automatic saw, automatic cutting machine, Adige CM501 – used machine Manufacturer: Adige Model: CM 501 Year: 1996 Blade diameter: 250–360 mm Cutting length: 2100 mm Max. workpiece diameter (round): 85 mm Max. workpiece size (square): 70 × 70 mm Nodpfxsy Ayc Do Alnjcu The ADIGE CM501 automatic circular sawing machine, manufactured in 1996 in Italy, is designed for fully automatic cutting of solid materials, tubes, and profiles made of steel, brass, aluminium, and other light alloys in industrial production environments.

Condition: used, Band saw, Behringer Band saw, Behringer HBP 220, Used machine Manufacturer: Behringer Type: HBP220 Year of manufacture: 1995 Inclusion dimensions: 2400 x 1800 x 1500 mm Weight: ~1300 kg Cutting range: 350 x 220 mm Ø: 220 mm - Hydraulic vise - Chip conveyor Ncjdpfx Aoy Hpf Aolneu Works perfectly, two-handed start

Condition: used, Sawing Machine, Industrial Circular Metal Saw, KALTENBACH Professional Industrial Circular Metal Saw with Complete Infeed and Outfeed Roller Conveyors, Used Machine Manufacturer Hans Kaltenbach Maschinenfabrik KG (Lörrach, Germany) Model TL 400 Serial Number 30973 Item Number 7081 Technical Specifications Applicable Saw Blade Size: 9.5 × 1050 mm Suitable for: HSS (High-Speed Steel) saw blades Carbide-tipped saw blades Integrated Cooling and Lubrication System: Nsdjzcxiuspfx Alnecu Equipped with a coolant pump and spray nozzle unit for blade lubrication and cooling during cutting operations. Overall Dimensions Width: 6420 mm Depth: 1000 mm Height: 1720 mm Roller Conveyor Dimensions Infeed Roller Conveyor Width: 3000 mm Depth: 300 mm Height: 1010 mm Outfeed Roller Conveyor Width: 2410 mm Depth: 300 mm Height: 1010 mm

Condition: used, Kaltenbach saw, cutting machine, mitre saw, metalworking circular saw, used machine Manufacturer: KALTENBACH Model: KKS Machine No.: 21139 Electrical specifications: 400 V Weight : 1200 kg aprox. Cutting speeds (blade peripheral speed): Z59 tooth count: • 1st gear: 17 m/min • 2nd gear: 34 m/min Nodpfeyfnpiex Alnjcu Z72 tooth count: • 1st gear: 14 m/min • 2nd gear: 28 m/min Z90 tooth count: • 1st gear: 11 m/min • 2nd gear: 22 m/min

Condition: good (used), Year of construction: 2008, Manufacturer: EBG-TECH Type: BMW N-63 Year: 2008 Max. disk diameter: 300 mm Overall size: 1900 x 1200 x 2900 mm Weight: 1750 kg Ncedpfjf Ecwzex Alneu