Used Ryan Ga 30 for sale (28,400)

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 06/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Gedpfx Anoy Rkpkj Reit Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 09/2018, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Insulated rear doors with 4 steel lockrods, TAPA - door Lock FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Gijdpfx Ajy Rkpdon Ret Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Internal Length/width/heigth - 1341cm/246cm/265cm Max weight - 42 000 kg Own weight - 8 927 kg 3 axles Pallet rack for 24 Euro pallets

Condition: used, mileage: 786,068 km, power: 324 kW (440.52 HP), first registration: 04/2011, fuel type: diesel, empty load weight: 18,470 kg, maximum load weight: 7,530 kg, overall weight: 26,000 kg, tire size: 315/80R22,5 156/---G, axle configuration: 3 axles, fuel: diesel, color: other, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel-air, loading space length: 5,660 mm, loading space width: 2,460 mm, front tire size: 315/80R22,5 156/---G, rear tire size: 315/80R22,5 ---/145G, Equipment: ABS, air conditioning, crane, cruise control, differential lock, trailer coupling, Palfinger PK53002-SH loading crane, 4x hydraulic extensions, lifting capacity 11.2 t at 4 m, 8 t at 6 m, 6 t at 8 m, 4.75 t at 10 m, 3.9 t at 12 m. Equipped with hydraulic cable winch. Includes radio remote control and charging station in the driver's cab. -- Subject to errors, misprints, and changes, sample images -- More data at: !, More Details: ! Godpjy Rllgjfx An Reit

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,917 kg, axle configuration: 3 axles, first registration: 02/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Variable height double deck V7 1650 for 11x3 EURO pal with 22 ALU beams. Gijdpfx Aoy Rkx Sjn Rjt THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. Insulated double rear doors (FP, NX17) foam with double s/steel lockrods. Plastic toolbox with cover holder, sleeves and drawer behind the unit. Black plastic fuel tank SCHMITZ 245l, 1 filling neck ; BIO-Diesel proofing. Tyres - 385/65R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4008mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes) .

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 177 operating hours Features and technical specifications: - Edge Control PPC 322 W control system with 21.5" 16:9 color touchscreen - ECO MODE energy saving function - Motorized pressure bridge adjustment - Extendable workpiece support 600 mm - Extension for extendable workpiece support - LED entrance light, 3-color - Motorized adjustment of infeed fence - Long infeed fence - Air cushion table BS 301 - iTronic package - Jointing milling unit FG201 with 2 milling heads, 64 mm high - Edge feeding unit 1903 - GluJet GJ 301 adhesive application system - Automatic glue height adjustment (sensing nozzle) - Cartridge storage for 4 cartridges Giedpfjy Rgwqjx An Ret - GluJet collection container - Pressure unit DW 301 with motorized NC axis - GM301 spray device after pressure unit with lubricant for high-gloss edges - Kappa unit 1918 pneumatic (60 mm) - Extraction hoods for Kappa unit - Milling unit FR301 MOT6 - Corner copying unit FF 301 MOT 1 incl. motorized horizontal axis adjustment - Shelf program - Scraping unit ZK301 MOT4 with high-gloss package - Surface scraper FK701 - Complete spray device for separating and cleaning agent - Buffing unit Availability: short-term Location: Flörsheim

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm Gjdpfx Aoy N N Uvjn Rjit - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Gisdpsulnb Djfx An Rjt Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 07/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle Giedpfey N Apmsx An Rst 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - feed opening width: 740 mm - feed opening height: 300 mm - shaft width: 780 mm - shaft diameter: 1000 mm - knife length: 780 mm - number of knives: 2 pcs - screen dimensions: 55x55 mm - from below: 4 toothed feed rollers - lower roller motor: 5.5 kW - from above: 3 toothed feed rollers - upper roller motor: 5.5 kW - belt feeder - belt feeder length: 4300 mm Giedpfxey Nzv Sj An Rst - belt feeder width: 600 mm - belt feed drive motor: 2.2 kW - main motor: 90 kW - reverse gear - auto-reverse - overall machine dimensions (L/W/H): 4600x2350x1700 mm - overall feeder dimensions (L/W/H): 4550x980x970 mm - total weight: approx. 11,000 kg – German manufacture - auto-reverse (with adjustable setting) – used chipper, in very good condition Net price: 231,900 PLN Net price: 55,200 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: good (used), Com J240/30 Banding Machine on a Base One of the most recognizable banding machine manufacturers on the market, manufactured in Japan. The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone structure with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for packaging business cards, leaflets, and other materials. Gijdjy Nzltjpfx An Ret Technical specifications: Tape width: 30 mm Performance: 26 cycles/min Dimensions of the banded product: 240 x 150 mm Made in Japan. Weight: 70 kg.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,405 h, load capacity: 3,000 kg, lifting height: 8,300 mm, free lift: 2,800 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,700 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,100 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16X7X10 1/2, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 9,400 kg, empty load weight: 6,400 kg, total height: 2,650 mm, total length: 2,000 mm, total width: 3,100 mm, color: red, Equipment: CE marking, adjustable boom, all wheel drive, front guard, head guard, lighting, pallet forks, sideshift, COMBILIFT C3000GST | 2012 | GAS | Triplex 8300 mm | Condition 5/5 ⭐ Technical specifications: Manufacturer / Model: COMBILIFT C3000GST Year of manufacture: 2012 Operating hours: 6405 h Drive: GAS Lifting capacity: 3000 kg Load centre: 600 mm Mast type: Triplex Lift height: 8300 mm Fork positioner: 1360 mm Fork length: 1100 mm Gisdpfx Asy R Rd Uon Rot Own weight: 6400 kg Dimensions: Length: 2000 mm Width: 3100 mm Height: 2650 mm Overall height: 3700 mm Tyres (NEW – 100%) 🆕 Superelastic (solid rubber) Front: 16x7x10 1/2 Rear: 23x10-12 Refurbished condition – corrosion-free ✨ Condition: Technical: 5/5 – fully serviced and inspected 🔧 Visual: Very good – refurbished, like new 👌 Immediately ready for use – no further investment necessary ✅ Warranty included. Transport available 🚛

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,340 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 Gisdpfsy R Nq Hsx An Rjt 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 5,567 h, load capacity: 4,000 kg, lifting height: 9,300 mm, free lift: 3,250 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 4,250 mm, motor manufacturer: G.M., gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,320 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27/10-12, overall weight: 10,700 kg, empty load weight: 6,700 kg, total height: 2,450 mm, total length: 2,450 mm, total width: 2,250 mm, color: red, Equipment: all wheel drive, cabin, head guard, lighting, pallet forks, 🔍 Looking for a reliable forklift? We are industry specialists! We specialize in the sale of high-quality forklifts, offering tested machines in excellent condition. Check out our offer and find the perfect equipment for your business! 💼 🚜 In this listing we present: COMBILIFT C4000 – TRIPLEX 9300 mm – Year 2017 – GAS – FREE LIFT – FORK SIDE SHIFT – CONDITION 5/5 The forklift is in excellent technical condition, fully serviced and ready for immediate operation. ✅ 📊 Key features & technical data: Model: COMBILIFT C4000 Year of manufacture: 09/2017 Load capacity: 4000 kg Mast type: Triplex Lifting height: 9300 mm Drive: Gas ⛽ Load center: 600 mm Engine manufacturer: G.M. Gedpfx Asy R Nqgen Reit Engine power: 74 HP Total weight: 6700 kg Free lift: 3250 mm Tires: Solid, superelastic, in good condition Front tires: 200/50-10 – 100% tread Rear tire: 27/10-12 – 100% tread Overall mast height (lowered): 4250 mm Technical condition: Fault-free, fully serviced 🔧 Visual condition: Very good 👍 Fork length: 1200 mm Overall height: 2450 mm Overall length: 2450 mm Overall width: 2250 mm Fork positioner width: 1320 mm 🛠️ Equipment: Extendable forks Work lights Adjustable boom Pallet forks Enclosed cabin Freelift Fork side shift ✅ This forklift is a perfect solution for industries that require efficient handling of long loads in narrow spaces, such as the timber, steel, or pipe industry. Thanks to its multi-directional movement system, it allows for easy maneuvering and maximizes warehouse space usage. 🌟Additional features: Integrated multi-directional control system Comfortable operator cabin High reliability in intensive operations Ideal for both outdoor and indoor use 🟢 Condition: The machine is fully operational, regularly serviced, and ready to work immediately. 🚚 We offer transport across all of Europe and include a FREE initial inspection! 💶 Pricing & financing: We offer full support with financing, including quick leasing and credit approvals – even for start-ups or businesses with limited credit history. Invoicing in EUR or PLN available Leasing and start-up financing programs We are an authorized supplier for most leasing companies Leasing decisions within 2 hours! ⏱️ FAST / SIMPLE / AFFORDABLE FINANCING

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) Gijdpfx Anoy Nuf Tj Rjt - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: new, Rexroth MDD093B-N-030-N2L-110GA1 Permanent Magnet Motor MNR: R911260472 SN:MDD093-21645, unused in opened original packaging, 100% functional, scope of delivery as per photos Gjdpfx Anoi D Nhde Reit

Condition: new, Rexroth Indramat MDD112C-N-015-N2L-130GA1 SN:MDD112-14925 ,unused, 100% functional, scope of delivery acc. photos Gedpfsi D Ndzox An Rsit

Condition: ready for operation (used), Indramat MDD112C-N-020-N2L-130GA0 permanent magnet motor, without encoder see photo serial no. according to photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Gedpfx Anoi D Iwie Rjit

Condition: new, Rexroth Indramat MDD112D-N-015-N2L-130GA0 Permanent magnet motor SN:MDD112-22413 without tachometer,unused, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gisdpfji D Nfbsx An Ret

Condition: new, Rexroth MDD093C-F-030-N2L-110GA2 3-phase permanent magnet motor, MNR: R911258045 , SN:7162006000401 ,unused in opened original packaging, 100% functional, scope of delivery according to photos Godpfei D Nhhsx An Reit

Condition: new, Indramat MDD112C-N-015-N2L-130GA1 SN:MDD112-19537 ,unused, 100% functional, scope of delivery according to photos Gjdpoi D Iwfjfx An Reit

Condition: ready for operation (used), Rexroth / Indramat MDD112D-N-015-N5L-130GA0 Permanent magnet motor, SN:MDD112-19538,used, normal traces of use, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gsdpji D Nbqefx An Rjit

Condition: new, Rexroth Indramat MDD112D-N-040-N2L-130GA0 Permanent magnet motor, SN:MDD112-20415 ,unused, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Giodpfsi D Nffjx An Rjt

Year of construction: 2002, condition: good (used), functionality: fully functional, machine/vehicle number: 0266232, I am selling an automatic metal saw with a feeding device - Type: PEGAS GONDA automatic 230-AFC - Year: 2002 - Serial No.: 0266232 Gedpfoy Rzqfjx An Reit ACCESSORY: Feeding device for cutting 5 m bars. The saw is fully automatic. The feeding device allows cutting 5 m bars into pieces of any length. For dimensions up to 40 mm, it can also feed two bars simultaneously. The saw is regularly maintained, flawless, and in excellent condition. It is connected to the electrical network and ready to start.

Condition: used, Year of construction: 2015, operating hours: 6,350 h, Quick coupler = Further Information = Gijdpfx Aey Rw D Ujn Rot Please contact Tobias Ebert for more information.

Condition: refurbished (used), Year of construction: 2017, operating hours: 7,845 h, load capacity: 3,000 kg, lifting height: 4,700 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,187 mm, battery voltage: 80 V, fork length: 1,200 mm, empty load weight: 3,981 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are technically overhauled according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ? Made in Germany – with responsibility and precision ? Rigorous technical inspection ? 400+ units available ? Worldwide shipping & customs handling ? Service & spare parts at fair prices ? Personal support – even after purchase Gijdpfx Asy Rq I Tjn Rot Test on site now and get professional advice – we’ll find the right solution for you. Industrial truck specifications: Manufacturer: Jungheinrich Model: Counterbalance Forklift EFG S30 Drive type: Electric Load capacity: 3,000 kg Year of manufacture: 2017 Operating hours: 7,845 Lift height: 4,700 mm Mast type: Triplex Full free lift: Yes Overall height: 2,187 mm Fork length: 1,200 mm Unladen weight: 3,981 kg Load centre: 600 mm Tyres: Solid rubber Model designation: EFG S30 Voltage: 80 V Battery weight: 2,012 kg Cabin features: Multipilot control unit Lighting: 2x front work lights Attachment: Side shifter Attachment: Additional hydraulic circuit routed to fork carriage