Used Running Rails for sale (9,543)

Condition: used, functionality: fully functional, Year of construction: 1975, Mechanical Swing Bending Machine Fedpfx Abjx Eafzj Tegk Make: FASTI Model: 208 2040x3mm Year: 1975 Technical Data Manufacturer: Fasti Model: 208-20-3 Year of Manufacture: 1975 Working length: 2040 mm Sheet thickness: 3 mm Upper beam stroke: 200 mm Stroke speed: approx. 7 mm/s Dimensions: Weight: Equipment • Swiveling upper beam • Motorized upper beam • Maximum upper beam opening: 200 mm • Lower beam adjustable beneath pivot point, 100 mm • Bending beam adjustable beneath pivot point, 100 mm • Bending beam swivels up to 180° • Backgauge adjustable from 0 to 600 mm • Various bending rails as shown in photo All information provided without guarantee. A powered demonstration is available at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors Fgsdpfxox Eaalj Ab Tjk - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Year of manufacture: 2004 Fgjdpfxowx H Hhj Ab Tok Machine type: NE Separator Andrin SMAR 140 Chassis: Mobile special structure on Extec 6000 Working platform: Mountable working platform with safety railing Accessories: Stairs, NE side discharge conveyor with electric motor, new magnetic conveyor/feeder belt to polar wheel - The plant was completely overhauled and serviced in winter 2021/22. Has not been in operation since then.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 0581 007 04, Speed: up to 9000 sheets per hour Format (cm): max. 102 x 72 // min. 40 x 35 Cutting force: up to 2.5 MN (250 t) Working hours: approximately 38,000 hours Equipment / Additional information: Stripping system (stripping station) with centering frame Die-cutting plates (over 500 pieces) Tools Technical data Convertible stock: - paper: min. 80-90 g/m2 - cardboard: max. 2000 g/m2 - corrugated board B and E-flute: max. 4 mm Sheet size: min. 35 x 40 cm // max. 72 x 102 cm Cutting size : - with front waste max. 70,5 x 102 cm - without front waste max. 72 x 102 cm Cutting force: max. 2.5 MN (250 t) Fgjdpfx Aexixhisb Tjk Running speed/hour: Depending on board quality and kind of job: max. 9000 sheets Pile height: - pallet feeder: max. 135 cm - universal feeder: max. 140 cm - delivery: max. 120 cm - delivery with pallet conveyor: max. 102 cm Power of main motor: 15 kW (20 HP) Connected load: 55 kWA Net weight: 22000 kg Gross weight: 25000 kg

Condition: used, Year of construction: 2000, Technical details: lifting capacity: 1,0 t Arm length: ca. 5000 mm height lower edge cantilever arm: 3200 mm cantilever arm length from center column: 4500 mm column diameter: 406 mm rotation: 120° ° crane classification: DIN 15018 H2B3 dimensions L x W x H: Kran: 4,62 x 0,62 x 3,5 m dimensions L x W x H: Ausleger: 7,6 x 0,66 x 0,37 m Fsdpfeu Nvmdjx Ab Tegk The slewing pillar crane consists of the following main groups: Pedestal boom (transport dimensions L: 7600mm x W: 660mm x H: 370mm) Hoisting gear: Balkancar type MB 093n, lifting height 4 meters; load chain type 7,2 x 21 double chain; hook/buckle with rope safety, pendant control Type 071/53 Slewing operation manual outreach column to crane hook = 4.000mm height of column = 3.200mm; running width on jib = 180mm Column base flange Ø 700mm; pitch circle Ø 520mm, 12 holes Ø 31mm *

Condition: used, functionality: fully functional, mileage: 343,303 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cruise control with active prediction Cab: CR Battery, 210 Ah, rear Diesel engine DC13 164 450 hp Euro 6 /Japan Emission 2016 Gearbox GRS905R Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm Night heater WTA cab heater 3kW Storage rear lower, driver side refrigerator Technical specifications smart ADR Continental Tyres for front axle, 315/70 Tyres for rear axle, 315/70 Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only Main wheelbase, 3750 mm Axle ratio, i = 2.53 Fuel tank capacity 825 l, left Fuel tank capacity 395 l, right AdBlue tank capacity 105 l, right Road speed limiter, adjustable, limiter (engine speed regulation) Technology Fedpex Dz H Refx Ab Tjgk Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED, automatic Daytime running light function LED and position lamps Fog lamp front type LED 3 diodes Cornering light Roof air deflector adjustable Door window air deflector

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand MAZATROL Fjdpfxex D D Spj Ab Togk Additional Equipment Workpiece air blast / Air through spindle in running / High pressure coolant system (Europe) / Preparation for chip conveyor (right) Chip conveyor right hand Mayfran / Mazak monitoring system B (RMP60) / Manual pulse generator 1 (detachable) / Ethernet operation function / Signal tower (3 colors lights) This 5-axis Mazak VTC 800/30SR was manufactured in 2018 and features a robust 48-tool magazine, high-pressure coolant system, and a NC rotary table with 360,000 positions. Ideal for complex 5-axis machining with its advanced synchronization and interpolation capabilities. If you are looking to get high-quality milling capabilities consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Fjdpfx Absx D Uz Is Togk Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: as good as new (ex-display), Year of construction: 2012, Bohrwerk SCHIESS SMT BMT 130 (2012) | Low Hours (~10k) | Heidenhain iTNC 530 | Ball Bar Tested ​Description: ​PREMIUM OFFER: LOW HOURS & VERIFIED GEOMETRY ​The Opportunity: You are looking at a Schiess SMT BMT-130 (Year 2012) with a transparent history of light usage. With only ~10,000 Spindle Hours (and 8,900 Program Run Hours), this machine has averaged less than 1 shift per day since new. It is NOT a tired production machine. ​✅ JUST COMPLETED (Ready for Inspection): ​Geometry Verified: Passed the Renishaw Ball Bar Test with excellent results (Proof of precision available). ​Aesthetics: Professional Fresh Paint applied. The machine looks excellent. ​Functionality: Automatic Tool Changer (ATC) fully serviced and tested. ​TECHNICAL DATA (Verified on Screen): ​Control: Heidenhain iTNC 530 Fsdpfxopa N Uho Ab Tsgk ​Spindle Time: approx. 10,090 h ​Program Run: approx. 8,900 h ​Spindle Diameter: 130 mm (ISO 50) ​WHY BUY THIS MACHINE? ​Authentic Condition: The low hours are genuine and verified by the control unit. ​Ready to Work: Geometry checked, ATC working, looking great. ​Price: At €180,000, it offers the best Price/Performance ratio on the market for a 2012 machine. ​VIDEO PROOF by request Technical data: Spindle diameter - 130mm Spindle Type - ISO 7:24 No50 Spindle Speed - 3000 RPM W axis - 800mm Y axis - 2000mm Z axis - 1600mm X axis - 4000mm Table size - 1800x2200mm Table loading capacity - 12.000kg General dimensions - 6800x6300x4600mm Machine Weight - 35000kg

Condition: good (used), Kama TS 74-60 Automatic Die Cutter One of the rarest models on the market. Manufactured in 2006, with a run of only 43 million sheets. Machine serviced and maintained on time. Fsdpoxzuluefx Ab Tsgk Format: 540x740mm Fully automatic, smooth speed control, central lubrication, and safety guards. Includes two frames, several hard sheets for clamping, trolleys, a tool kit, and documentation.

Condition: ready for operation (used), Siemens 6ES5948-3UA21 CPU 948 , used, slight signs of wear (lever "Run/Stop" broken off), 100% functional Fgodpei Edr Esfx Ab Tjk

Condition: used, Year of construction: 2008, operating hours: 9,800 h, Please contact ATS Norway for more information Please provide reference number upon request: 21986 Specifications: Year: 2008 Hours: approx. 9,800 20,000 kg Grading bucket S70 quick coupler Extra lights Tilt beam Radio/CD Climate control/AC Description:CAT 319DL tracked excavator from 2008.The boom was welded when the owner purchased the machine. It has run approx. 4,000 hours since the welding and has performed well in their operation.Service has been carried out internally as needed.S70 quick coupler.Can be delivered at short notice. Hours: 9800 Own weight: 20000 Fodpfx Abox Dqrpe Tjgk

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,500 h, Control Unit Brand FANUC Model Series 16i-MB Main Drive Tool taper BT30 Number of axis 4 Turret Number of turrets 1 Fjdpfx Aox D Rxieb Tjgk Tools Number of index 14 This 4-axis FANUC Robodrill Alpha-T14 iD was manufactured in 2004. It features a BT30 spindle taper, a 14-tool turret, and a table size of 750 x 380 mm. Equipped with a Fanuc series 16i-MB control system and a 4th axis by Yukiwa. Running time stands at 23,500 hours. If you are looking to get high-quality milling capabilities consider the FANUC Robodrill Alpha-T14 iD machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2021, 2021 | Ford TRANSIT | Used Commercial Vehicle - Tipper | 76551 kms 📍Location: France, Saint-Étienne 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 27100 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 40 inspection points 40 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very well maintained tipper truck. It started and run properly during the inspection. First hand machine, well maintained. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39952 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Fedpex Dq R Eefx Ab Tsgk 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 155,551 km, power: 335 kW (455.47 HP), first registration: 05/2023, overall weight: 26,000 kg, fuel type: diesel, color: yellow, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, total width: 2,500 mm, total height: 3,866 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Swap body frame 715/745 cm., emergency braking assistant, lane assistant, attention assistant, traffic sign assistant, adaptive cruise control, stability control assistant, trailer stability control assistant (TSA), electronic braking system with ABS and ASR, cruise control, differential lock rear axle, traction aid, BigSpace, multimedia cockpit, pre-installation for Mercedes-Benz Truck App Portal, navigation system, parking air conditioning, air conditioning, additional hot water heating, driver airbag, multifunction steering wheel, leather steering wheel, sliding/tilting roof with electric glass version, cool box, driver comfort suspension seat, massage function for driver's seat, 2x sleeping beds, outside mirrors heated and electrically adjustable, electric. Window lifter driver and passenger door, rain sensor, light sensor, fog lights, LED daytime running lights, automatic daytime running lights, automatic high/low beam, cornering light, central locking with remote control, headlight cleaning system, headlight bracket, compressed air horns on driver's cab roof, air suspension with lifting and lowering device front and rear, trailing axle can be lifted, square aluminum tank approx. 500 liters, additional tank approx. 500 liters, fifth wheel height 1120 mm, vehicle can be covered with advertising and/or labeled Fedex Dpzijpfx Ab Togk Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: good (used), Renz Mobi 500 Semi-Automatic Spiral Binding Machine In perfect condition, manufactured in 2019. Fjdexk U Injpfx Ab Tegk This semi-automatic spiral binding machine from the German company RENZ features: • Touchscreen control • The fastest setting changes for various work formats in this class via an electronic panel, which is particularly important for small, frequently changing runs • Spiral diameter adjustments from 1/4″ to 1 1/4″ (6.9 to 32.0 mm) using a knob • Hanger feeder • Quiet operation. No compressor required. • Working width: 105-500 mm • Mobile, easy to move • Outfeed conveyor included • No special operator training required 230V power supply Weight: 550 kg

Condition: new, INA x M-rail + V-rail + needle cage SN 42369-133 SET M6535x600 F-325147 87 K1203, unused, in sealed original packaging, 100% functional, scope of delivery as per photos Fsdjqm Srxopfx Ab Tegk

Year of construction: 2019, operating hours: 11,111 h, condition: ready for operation (used), Control Unit Brand HAAS Model n/a Main Drive Spindle speed range 4000 rpm Fgedpfxsx D Ezfj Ab Tsk Additional Equipment Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm Features: Hinged belt chip conveyor, Lathe parts catcher Coolant System: 208l coolant tank, Variable coolant flow Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN Additional Features: Macros, SOM This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Application Types Turning

Year of construction: 1992, condition: ready for operation (used), General Data Machine weight 58500 kg Main Drive Pressing force 3150 kn Maximum sheet thickness 6 mm Main motor power 60 kw Stroke 200 mm Additional Equipment Magnetic conveyor for scraps Quick die cart system New rails for die cart system Scissors for sheet cutting Scissors for sheet cutting Documentations and drawings included This RAVNE PRESSES Manzoni 315 stamping machine was manufactured in 1992. It features a robust eccentric H-frame, monoblock design with a press force of 3150 kN and a drive power of 60 kW. It has a fixed stroke of 200 mm and slide dimensions of 2550 x 1250 mm. If you are looking to get high-quality stamping capabilities, consider the RAVNE PRESSES Manzoni 315 machine we have for sale. Contact us for more information. Application Types Fsdpfx Aex D Ef Rob Tjgk Stamping

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 3120 mm Measurements depth 2505 mm Measurements height 4125 mm Machine weight 5530 kg Main Drive Number of axis 3 Movement X-Axis Movement 1500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1200 mm Table Table load 4500 kg Additional Equipment 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system Ø 30 mm reference sphere INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer General Data Measurements width 3120 mm Measurements depth 2505 mm Measurements height 4125 mm Machine weight 5530 kg Main Drive Number of axis 3 Movement X-Axis Movement 1500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1200 mm Table Table load 4500 kg Additional Equipment 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system Fgodpfx Abjx D S Dmj Tjk Ø 30 mm reference sphere INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer This 3-Axis Mora Primus 152012 was manufactured in 2019. It features a large measuring range with X-axis at 1500 mm, Y-axis at 2000 mm, and Z-axis at 1200 mm. Supports a maximum load of 4500 kg, ensuring robustness for various tasks. With a vector speed up to 519 mm/s, it offers efficient operations. If you are looking to get high quality measuring capabilities consider the Mora Primus 152012 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,913 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle motor power 29/22 kW (40/100%ED) Number of axis 5 Spindle speed range 20 to 28000 rpm Movement X-Axis Movement 450 mm X-Axis Rapid Traverse 80 m/min Y-Axis Movement 580 mm Y-Axis Rapid Traverse 80 m/min Z-Axis Movement 400 mm Z-Axis Rapid Traverse 80 m/min C-Axis Movement 360° Fjdpfx Abjx D Eqge Tsgk This DMG Mori HSC 55 linear Universal Machining Centre was manufactured in the year 2011 and has 61913 control hours, 59275 machines on hours, 10986 program run hours, and 10631 Spindle running time (spindle exchange at approx.7300 hours). The machine has a spindle speed of 20 - 28000 rpm and a capacity for 30 tools. It is equipped with a Heidenhain iTNC 530 control unit and has 5 axis. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand SIEMENS Fodpfx Aox D E U Esb Tegk Model 840D sl Main Drive Spindle speed range 9000 Stroke 200 mm Number of axis 3 This 3-axis HELLER PT 16 was manufactured in 2016. It features a multifunction spindle driven by a compact servo motor, achieving speeds up to 15 m/min and a maximum of 9,000 rpm. The machine offers a 200mm stroke in 3 axes with ball rail guides and screws for enhanced precision. Consider the opportunity to buy this HELLER PT 16 CNC milling machine. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand HEIDENHAIN Model iTNC-530 Movement X-Axis Movement 620 mm Y-Axis Movement 820 mm Z-Axis Movement 650 mm Additional Equipment Optional chucks and open mind license for 5-axis / Approx. 260 HSK63 holders with rack / CAD-CAM Hypermill OPEN MIND license for 5-axis simultaneous milling Note: The Y-axis is louder than it should be. We recommend replacing the bearings for the Y-axis. However, the machine is running and is still in production. Fgsdpfxex D Niaj Ab Tsk This 5-axis POSmill H 500 U was manufactured in 2018, featuring a vertical machining center with X-620, Y-820, Z-650 travel dimensions, and a 60-space workshop. It includes internal coolant supply plus air cooling and is equipped with a Heidenhain iTNC-530 control for five-axis simultaneous milling. If you are looking to get high-quality milling capabilities consider the POSmill H 500 U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, This CEFLA ROCTRE W was manufactured in 2007. A fully refurbished edgebander, it offers stable performance and reliability, ready for immediate use. Maintaining the original structure's strength, it's ideal for those needing a ready-to-run solution without further restoration. Contact us for more information. Application Types Edge Banding Fodpsx D Hw Isfx Ab Togk

Year of construction: 2004, condition: ready for operation (used), Control Unit Brand FANUC Model 16I-PB Main Drive Punching force 300 kN Table Fedpfx Aex D Ri Isb Tegk Table load 150 kg Tools Number of station 15 Additional Equipment Programming software: JETCAM This Tecnology Tecnotransfer 15 SR was manufactured in 2004. It features a punching force of 300 kN and an installed power of 14 kW. The worktable accommodates parts up to 1500 mm × 3000 mm, weighing a maximum of 150 kg. It operates at 310–480 strokes per minute and includes 15 indexable tool stations. Runs on JETCAM software. Contact us for more information. Application Types Punching