Used Rotary for sale (4,069)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 617 138 66, input voltage: 380 V, type of input current: three-phase, total length: 5,000 mm, total width: 3,100 mm, total height: 2,000 mm, Rotary slitter for converting rolls into sheets Godpfxszi S Ago Ak Uoug Cardboard and corrugated paper Slitting width from 700 to 1500 mm Maximum roll diameter: 1500 mm

Condition: like new (used), Compressor, rotary vane compressor, low-pressure gas compressor, gas compressor, Ro-Flo 219M Manufacturer: Ro-Flo Compressors, LLC Type: 219M Godpfx Aoyn Ridsk Uoug Serial number: 10568-4 -inlet pressure: 2.3 bar (gauge) -maximum pressure: 7.7 bar (gauge) -volumetric flow rate: 955.8 m³/h -operating speed: 275–640 rpm -maximum operating temperature: 176 °C -overall dimensions: 1450 × 690 × 850 mm -weight: approx. 1,341 kg

Condition: used, Bongard MG Range Gjdpfx Ajzyafdsk Ueug Gas or oil-fired, depending on configuration Heating power: 110 kW Gas connection: 3/4" galvanized pipe Trolley: 800 × 1000 mm Trolley: 780 × 980 mm Maximum load: 200 kg 180 to 216 baguettes (250 g each) 18 levels for baguettes 108 to 135 loaves (400 g each) 15 levels for loaves Stainless steel baking chamber Rotating tray Pulsed steam injection Maximum temperature: 280 °C Power supply: 3N~400 V Electrical protection: 16 A Water pressure: 2.5 to 4 bar Water connection: 3/8" or 12/14 mm pipe Oil connection: 10/12 mm copper pipe Smoke exhaust: Ø 200 mm Dimensions: 2251 × 2062 × 2492 mm Depth with door open: 2774 mm Minimum door opening: 1020 mm Net weight: 1830 kg Key advantages Capacity of 180 to 216 baguettes (250 g each) Production of 108 to 135 loaves (400 g each) Rotating trolley loaded up to 200 kg Baking chamber entirely made of stainless steel Adjustable blowing vents Two valves for programmable steam evacuation Retractable and removable ramp for loading Front access to the burner and technical components Reinforced door with double-glazed, ventilated glass, removable

Condition: like new (used), Compressor, rotary vane compressor, low-pressure gas compressor, gas compressor, Ro-Flo 19LE Manufacturer: Ro-Flo Compressors, LLC Type: 19LE Serial number: 10568-1 -suction pressure: -0.1 bar -maximum pressure: 3 bar Gusdpsylcngefx Ak Usg -volumetric flow rate: 3,532 m³/h -operating speed: 275–640 rpm -maximum operating temperature: 176 °C -overall dimensions: 2000 × 700 × 900 mm -weight: approx. 2,500 kg

Condition: like new (used), Year of construction: 2025, rotary table diameter: 1,000 mm, Equipment: rotational speed infinitely variable, - Horizontal load capacity: 1200 kg - Vertical load capacity: 600 kg - Table dimensions: 1000 mm Guedpfx Akjzcyxqe Ujg - Electrically tiltable - Wireless remote control - Digital display - Documentation - 400V

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. Gujdoxxv D Hepfx Ak Usg If you have any further questions, please feel free to contact us!

Condition: as good as new (ex-display), Year of construction: 2024, weight max. in kg max. 1000 kg turning speeds 0,18 - 0,58 U/min height 976 - 1436 mm inclination 0 - 115 ° table diameter 895 mm voltage 380 V total power requirement 2,0 kW weight 685 kg range L-W-H 2414 x 920 x 1436 mm Exhibition machine from 2024 Gsdpsw U U R Eofx Ak Ujug with only approx. 2x operating hours Condition NEW!! Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): ?v=Vayw8Ny64nc

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 845000756E, turning diameter: 400 mm, spindle bore: 103 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 265 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,400 mm, total length: 6,000 mm, total width: 2,400 mm, overall weight: 8,000 kg, bar passage: 90 mm, center height: 360 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 50 kVA, operating hours of spindle: 4,617 h, Equipment: documentation/manual, DMG MORI ECOTURN 510 CNC lathe Gusdpfx Aszxzc Iek Ueg - Chuck diameter: 250 mm - Diameter in the front bearing: 140 mm - Feed drive in the X and Z axes: 40 x 10 mm - Feed forces X/Z: 7.5 kN - Y-axis feed force: 7000 N - Rapid traverse C1 axis: 100 m/min - Travel measuring system X/Y/Z: absolute rotary - Positioning uncertainty X: 0.008 mm, Z: 0.010 mm - Working area, distance between centers: 1150 mm - Max. swivel range above the bed: 680 mm - Swivel range above the X slide: 465 mm - Travel of the Y-axis: 120 mm (+/- 60 mm) The machine is equipped with a tailstock and a 12-position tool turret, including the tool holders located in the turret, as well as a three-jaw chuck SMW AUTOBLOK, diameter: 300 mm, including a chip conveyor, filter extraction, and documentation. FCA D-73529 Schwäbisch Gmünd - to be loaded onto a truck.

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Details of the R80E MC model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80/R80E - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. Gusdpfoyrn Rajx Ak Ueg - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: good (used), Year of construction: 2000, clamping force: 4,000 kN, _TECHNICAL DATA – ENGEL ES 1800H/500W/400 HL-2F_ _INJECTION UNIT_ | AG1800H | AG500W Screw diameter: 70 mm | 40 mm Screw length: L/D 20 | 20 Metering stroke: 270 mm | 200 mm Screw speed: 226 rpm | 400 rpm Shot rate: 81 g/s | 32 g/s Injection rate: 386 cm³/s | 198 cm³/s Max. shot volume: 1039 cm³ | 251 cm³ Spec. injection pressure: 1441 bar | 1300 bar Spec. inj. pressure (increased): 1735 bar | 2020 bar Nozzle stroke: 750 mm | +5/-100 mm Nozzle contact force: 144 kN | 63 kN Heating capacity: 30.2 kW | 11.4 kW Heating zones (incl. nozzle): 5 | 7 _CLAMPING UNIT_ Clamping force: 4000 kN Opening stroke: 950 mm Ejector force: 82 kN Ejector stroke: 250 mm Max. platen distance: 1550 mm Min. mold height: 600 mm Platen BAP: 1400×1080 mm Platen FAP: 1400×1200 mm _DRIVE_ Pump power: 55 kW Oil (main tank): 540 l Gujdpfx Ajzvf H Eek Usg Oil (suction tank): 400 l _WEIGHT (without oil)_ Clamping unit: 27 850 kg Inj. unit AG1800H: 5 600 kg Inj. unit AG500W: 1 000 kg

Condition: like new (used), Kitagawa MR200 rotary table Condition: new, unused Gujdey H Ewnopfx Ak Ujg The table has been kept in storage and not used

Condition: excellent (used), Year of construction: 2008, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 0000124652, overall weight: 2,035 kg, load capacity: 2,500 kg, arm reach: 1,900 mm, pivoting range: 270 °, controller manufacturer: kuka, controller model: kuka, teach pendant manufacturer: kuka, teach pendant model: kuka, input voltage: 380 V, type of input current: three-phase, repeat accuracy: 0.1 mm, Equipment: documentation/manual, The robotic cell is composed of a robot, a 3-axis rotary table and a FRONIUS welding machine. Godpfx Akoyp Ha Ie Uoug

Condition: used, Rotary table, make WMK 'Fritz Heckert' Model D315 k TGL 28 561/01 Serial number 33402 • Clamping surface D = approx. 310 mm Gujdpfxezw H Rho Ak Ueg

Condition: used, Year of construction: 2010, table length 2000 mm table width 1800 mm table load 12,5 t longitudinal adjustment 1250 mm Gedpfx Akjztrvns Ueug longitudinal feeds of table 0,63-2000 mm/min table height 920 mm groove width 36 mm Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 3,7 x 2,1 x 1 m

Condition: used, Year of construction: 2013, functionality: fully functional, Mobile valve machining / turning machine Unigrind FDA 500 for sale. The machine is used, in good condition and fully operational. Inspection and testing on site are possible. The Unigrind FDA 500 is designed for machining and repair of valve sealing surfaces, seats, and flanges. The equipment allows precise turning, milling, and surface refurbishment directly at the worksite. Specification: Model: Unigrind FDA 500 Gjdpjy R R Imefx Ak Ueug Year: 2013 Mobile valve machining machine Suitable for repair of valves, flanges, and sealing surfaces Accurate machining of flat and conical surfaces Fits various types of industrial valves Compact and robust design Professional industrial equipment German quality More info: Unigrind FDA 500 Suitable for energy, oil, gas, chemical, and industrial companies as well as repair workshops. If you have further questions, we will be happy to assist you.

Year of construction: 1987, condition: used, Kehren rotary table, type RS 7C, used Manufacturer: Kehren, Honneff Item number: 4179 Year of manufacture: 1987 Control system: Siemens 3G PLC: Siemens S5 Grinding motor: BBC QUB 200 Rotary table diameter: 750 mm Grinding head diameter: 460 mm Gujdpfehgmwgex Ak Ujg Operator panel with screen Coolant system Flushing pump Coolant pump Automatic paper band filter system Control cabinet

Condition: excellent (used), Rotary Autoclave BARRIQUAND STERIFLOW 5 Baskets – Industrial Sterilization Gjdozbt Szepfx Ak Usug BARRIQUAND STERIFLOW rotary autoclave with a capacity of 5 baskets, designed for the sterilization, pasteurization, and heat treatment of packaged food products through industrial batch processes. The equipment incorporates a load rotation system during the thermal cycle, allowing the packages to be kept in controlled motion throughout the process. This technology is particularly interesting for products where heat transfer can benefit from agitation, promoting homogeneous heat treatment and, depending on the product and format, optimizing process times. Its 5-basket configuration provides a high capacity for industrial production facilities. MAIN FEATURES -Manufacturer: BARRIQUAND STERIFLOW -Type: Industrial rotary autoclave -Capacity: 5 baskets -Application: sterilization / pasteurization -Load rotation system -Batch heat treatment -Horizontal chamber -Industrial construction in stainless steel -Large diameter front door -Mechanical safety locking system -Motorized drive for rotation -Automatic control of process parameters -Integrated piping and valve system -Designed for industrial operation -Integrable into automatic sterilization lines PROCESS The 5-basket BARRIQUAND STERIFLOW rotary autoclave is designed to perform controlled heat treatments on previously packaged products. The baskets are placed into the chamber, and once closed, the programmed cycle is executed through the heating, thermal holding, and cooling phases. During the treatment, the system allows for controlled rotation of the load, generating product movement within the package when its characteristics allow. This can favor heat transfer and achieve a more uniform thermal distribution. It can be integrated with: -Basket loading and unloading systems -Basket conveyors -Automatic loaders and unloaders -Transfer systems -Process water preparation equipment -Automatic sterilization lines APPLICATIONS Especially suitable for canning industries, manufacturers of ready-made meals, sauces, vegetable products, meat products, pet food, and other food industries that require industrial sterilization or pasteurization processes. Depending on the configuration and process, it can be used with cans, jars, and other packaging compatible with heat treatment and rotation in the autoclave. The combination of BARRIQUAND STERIFLOW technology, rotary system, and 5-basket capacity provides a particularly interesting solution for industrial sterilization facilities with high capacity. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar Gujdpswugczsfx Ak Uog 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 750 h, power: 9 kW (12.24 HP), input voltage: 430 V, number of axes: 4, number of slots in tool magazine: 10, controller manufacturer: Yaskawa, total height: 800 mm, table length: 4,000 mm, table width: 2,000 mm, Machine purchased from the manufacturer Plot Electronic in 2016. Used for milling models and molds in materials: MDF, polyurethane. In 2022 it was upgraded with the addition of a 4th axis and an oscillating head. Full technical specification of the machine: - Stable welded construction with an annealed gantry made in hybrid monolith technology - Mechanics – linear guides, ball carriages - Helical rack and pinion system - Spindle with tool changer, 9kW, ISO 30, ER 32 Gjdpfx Aszxqtpsk Usug - Linear tool magazine holds 10 tools - Drives – AS servo drives - CNCGraf control module in Polish - Simulation possible before machining, real-time cutting visualization - Material height sensor - Tool length sensor - Spindle cooling system – compressed air - Control cabinet with computer and keyboard - Vacuum table - T3000K oscillating head - 4th rotary axis on a tailstock, mountable on the table - Spindle speed control system

Condition: good (used), Year of construction: 2013, Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Godpfxewp E Hzj Ak Ujug Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, total width: 1,600 mm, total length: 4,000 mm, total height: 2,600 mm, overall weight: 2,500 kg, year of last overhaul: 2023, We are offering this overhauled Markl Langrohr round filler 8/2 filling machine, year of construction approx. 1990. Markl 8/2 long-tube filler, completely overhauled. Comprehensively refurbished at the beginning of 2023, including a new gearbox. Filling capacity approx. 1,500 bottles/hour, depending on carbonation and temperature. Currently set up for 0.33l bottles. Year of manufacture unknown, approx. 1990. The machine can be upgraded to a total of 16 filling heads. HDE available. Includes rotary table at the infeed side. Outfeed equipped with conveyor belt and collecting table. The machine runs perfectly without any issues. Gedpeyymgwjfx Ak Ujug Dimensions (LxWxH): 4,000 x 1,600 x 2,600 mm Power connection: 16 A Weight: approx. 2.5t Additionally included: - Unused conveyor guide, length 160 cm - Conversion kit for filling 0.5l bottles - Large number of spare parts, seals, etc. - 9m new, unused conveyor belt The machine will be available from the end of April! Price: negotiable, €52,000 net

Year of construction: 2003, operating hours: 0 h, condition: good (used), machine/vehicle number: 00278, ROTARY COMPACTOR FOR CARDBOARD, PLASTIC AND BOXES OR CARDBOARDS Valpak Brand/Marca TECHVAL Type/Model// Tip/Model VALPAK Putere/Power 4 kW Year of manufacture/an fabricatie 2003 Acustic pressure/nivel de zgomot 59 db (A) Supply voltage/alimentare 380 V triple phase Protection/protectie 16A curve D Sizes/Dimensiuni in cm Coil Weight – Al fins 140x210x280 cm (LxWxH) 1200 kg Gusdpjfh Slpefx Ak Ueg Amount in stock/pe stoc 1 pc/buc 1 round bag of shredded waste = 36 containers of uncompressed cardboard 1 round cardboard bag will have 300/400 kg, of said boxes300 kg, plastic 200/300 kg Standard equipment has: Photoelectric cell, automatic cleaning system, 100% full sensor with machine stop, special roller cardboard / plastic / crate, system humidification, loading hopper on the front, management by PLC. Can work in cold condition until (-30 ° C), it has an antifreeze tank. Price/Pret Euro 2.850 + TVA Ex Works Loaded: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2019, functionality: fully functional, For sale: Unigrind KSM600 flat surface grinding/lapping table. The equipment is in good condition and fully operational. Inspection and testing on site are possible. The Unigrind KSM600 is designed for grinding and lapping flat sealing surfaces. It is suitable for machining and refurbishing surfaces of valves, gates, flanges, and other industrial components. Specification: Model: Unigrind KSM600 Stationary flat surface grinding/lapping table Intended for machining flat sealing surfaces Suitable for valve, gate, and flange repair Guodpfsy R Rl Sox Ak Uog Robust industrial housing Stable and precise processing Simple and user-friendly operation Professional industrial equipment More information: Unigrind KSM600 Suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be happy to assist you.

Condition: excellent (used), functionality: fully functional, rotary table diameter: 310 mm, The TR310 is a dual-axis tilting rotary table that provides maximum rigidity and accurate performance for 3+2 and full 5-axis machining of medium to large parts. Scale feedback on the A (tilting) axis improves positioning accuracy and repeatability. Godoztakaopfx Ak Uoug Add 4- and 5-axis capabilities to your machine. Easy plug-and-play connection to Haas machines. Industry-leading performance and capabilities. Heavy-duty design.

Condition: used, Year of construction: 2010, table diameter 1000 mm table load 0,5 t table height 300 mm total power requirement 12 kW weight of the machine ca. 0,5 t Gjdpfxjznndkj Ak Ujug dimensions of the machine ca. 1 x 1,2 x 0,3 m Permamantly rotationg table,adjustable in speed. Basic of table has a diameter of 570 mm. Table diameter increased to 1000 mm. Table was mounted on a surface ginding machine. Table will be delivered with a new spare motor.