Used Rolling Scissors for sale (7,359)

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: MH1500X13 MM 4 ROLL, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELAP, controller model: LYNX 4 AXIS, number of rollers: 4, roller (bottom) diameter: 200 mm, roller (top) diameter: 220 mm, side roll diameter: 170 mm, roller diameter: 250 mm, roller length: 1,550 mm, working width: 1,500 mm, working height: 800 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 3,300 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 1,300 mm, power: 4.05 kW (5.51 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL PLATE BENDING MACHINE NC 1500X 13/10MM Lredpfx Ajxmvhuof Eou MG SRL HYDRAULIC MODEL MH1513 MM YOM 2010 PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Technical data: Bending capacity: plate width 1500 mm thickness rolling 13 mm pre-bending 10 mm --- minimum diameter of rolling D=250 mm depending on the plate thickness and yield strength --- Rollers useful length 1550 mm Upper roll 220 mm Lower roll 200 mm Side rolls 170 mm --- Voltage 3phase 400/50 electric motor 5,5 hp on hydraulic unit --- Configuration: Rollers hardened surface high strength Rotation rollers hydraulic powered with gear units Pre-pinch load control upon the different plate thickness and yield plate strength Console electric commands joysticks and digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with memory up to 200 programs Front opening hydraulic drop-end & upper roll tilt-up to remove the round closed shells Speed slow/fast variable Safety installations with emergency stop. Instruction manuals for operation and service. Dimension mm 2900x1450xH1300 mm Weight 3300 Kgs

Condition: used, Year of construction: 1987, With this roll press, you can press different materials together in a single pass. Application example: Previously, sandwich panels were bonded and pressed with this machine. Technical data: - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1987 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left Lrodpjwd Nx Djfx Af Eju - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Year of construction: 1997, condition: good (used), machine/vehicle number: 792-235, Offer 25370 Technical Data: - Machine for producing complete profiles from SCHÜCO - Aluminium half-shells from various SCHÜCO series. - Polyamide or polythermide insulating bars are used as connecting elements. - Angle adjustment for profiles intended for façades and skylight structures - Max. profile cross-section: - Profile depth up to 250 mm - Profile height up to 300 mm (at a maximum insulating bar spacing of 300 mm) - Working direction: right to left (not reversible) - Foiling unit - Foiling device for 3 sides on façade profiles - Straightening roller set - Infeed roller conveyor – outfeed roller conveyor - Various profile roller sets - Pneumatic connection: 8 bar - Power supply: 2 x 400 V - Space requirement: approx. W 16,500 x H 1,250 x D 1,600 mm - Weight: approx. 2,000 kg Lsdpjxph Tujfx Af Ejru

Condition: used, functionality: fully functional, Year of construction: 1990, number of rollers: 3, roller (bottom) diameter: 100 mm, roller (top) diameter: 100 mm, side roll diameter: 100 mm, working width: 1,540 mm, sheet thickness steel (max.): 3 mm, overall weight: 785 kg, power: 1.1 kW (1.50 HP), Capacity: 1540 x 3,0 mm. Capacity with prebending: 1540 x 2,0 mm. Upper roll: Ø100 mm. Lower roll: Ø100 mm. Motor: 1,1 kW. Year: 1990 Country of origin: Sweden. Size (L x W x H): 2350 x 700 x 1050 mm. Weight: 785 kg. Asymmetric. With motorized bending roll with clock in hand wheel. Lsdpfx Ajxphp Nof Eoru All our used machines are tested and serviced before delivery.

Condition: good (used), Year of construction: 2009, Fritsch Rollfix Automatic Dough Sheeter - model 600/650 - used - year of manufacture: 2009 - automatic dough rolling - automatic flour duster Lrjdpfx Afoxpg I Do Esu - computer control - machine from production line - technically inspected - collection from warehouse/shipping option available - price on request

Condition: used, functionality: fully functional, Year of construction: 2007, Plate bending machine: Birlik KSM 1280X1 plate bending machine type: KSM year of manufacture: 2007 bending length: 1300 bending capacity: 1mm roller diameter: 2x90mm, 1x50mm cone bending equipment mains voltage: 400v 50Hz 0.75kw foot pedal operation. Currently, a gear motor with a higher speed than the standard is installed. machine length: 1900mm machine width: 550mm height: 1300mm weight: 300 kg high-strength rollers according to SAE 1050 certificate Lsdpfxjw Ty Due Af Eoru

Condition: new, Year of construction: 2025, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, roller diameter: 95 mm, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop - Documentation - 400V Lodpfx Afjxn Rrqj Esru

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14I/9064, Offer Number: M14I/9064 Machinetype: thread rolling machine - flat die Info: vibratory feeder Lrodpfx Afsxnytqj Eeu Make: MENN Type: GW62 Constr. year: 1974 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Location: Germany

Condition: good (used), Manufacturer: Hymen Lrjdpfsh Eiidex Af Eju Maximum cutting length: 2300 mm

Condition: ready for operation (used), functionality: fully functional, Technical Data – SENY D75B: Lrjdpjxm Stgefx Af Eou Rolling Pressure: 220 kN Workpiece Diameter: min. 3 mm – max. 70 mm Maximum Pitch: 6 mm Maximum Groove Pitch: 2.25 mm Maximum Roll Width: 160 mm Roll Diameter: min. 133 mm – max. 170 mm Roller Shaft Rotational Speeds: 24 – 30 – 38 – 45 – 62 – 72 – 90 – 114 rpm Roll Holder Shaft Diameter: 54 mm standard – 69.85 mm special Distance Between Shafts: min. 135 mm – max. 230 mm Working Stroke: max. 15 min Feed Rate: 0.5 mm/s – 6 mm/s Rolling Time: 0.1 s – 100 s Pause Time: 0.1 s – 100 s Main Motor Power: 5.5 kW Electrical Consumption: 8.6 kW Reservoir Capacity: 130 liters Weight: approx. 2,100 kg. Additional rolls available: M4.5 x 0.75 ISO. M6 ISO. M10 ISO.

Condition: new, The KPB 30 is a versatile Tube and Profile Rolling Machine that excels in both horizontal and vertical bending applications. This robust machine features a powerful motorized drive for the fixed lower rollers, allowing for precise manual adjustment of the upper roller to set the bending diameter. Designed for universal use, it is well-suited for a range of profiles including flat and angle irons, as well as T and U profiles. The KPB 30’s proven technology is reflected in its efficiency, making it a reliable choice for tool and mold making, repair workshops, and production environments. It comes standard with a foot pedal for enhanced convenience, ensuring smooth operation. With a bending speed of 4.2 m/min and a shaft diameter of 30 mm, the KPB 30 is ready for immediate use. For those looking to invest in a high-quality, robust machine for tube and profile processing, request a quote today and explore the capabilities of this exceptional machine tool from KNUTH. Ledewut H Hopfx Af Esru

Year of construction: 2013, condition: good (used), Scissors lifting table with driven roller conveyor - second-hand - Price (net) ex location: only 1.500.-€, dismantled and loaded! Manufacturer: Schwinghandl Lodjfwr Uqjpfx Af Esru Year of construction: 2013 Type: roller conveyor / scissor lift Length of roller conveyor: unknown Width element approx. 75cm roll length: approx. 68cm roll width: approx. 5cm Element height: approx. 15cm lifting height: currently approx. 78,5cm Motor: SEW condition: good Available: immediately Location: Zwickau, later warehouse Frankenberg (Saxony)

Year of construction: 2018, condition: used, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm Lredperaqhxsfx Af Eou weight of the machine ca. 50 kg dimensions of the machine ca. 560 x 220 x 500 mm

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M14I/9063, Offer Number: M14I/9063 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Lsdpexnyrtefx Af Esru Type: FL-10-80 Constr. year: 1985 diameter range: 10 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 400 Location: Germany

Condition: good (used), 082 USED Rolling machine, croissant machine, baguette machine. Automatic machine with control panel. EXTERNAL DIMENSIONS (in cm.): - height 140 (max: 150), Ljdpfswgcwrsx Af Eoru - width 120 - length: 195, - left wing: 84/63 - right wing: 74/64 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), functionality: fully functional, type of input current: AC, Pee-Wee Model P24US Hydraulic Thread Rolling Machine for in-feed or thru-feed rolling with helical thru-feed dies Max. rolling pressure: 24 tons Max rolling diameter: 75mm Min rolling diameter: 5mm Max rolling width: 200mm Lrjdpfxexl Ebhe Af Eeu Diameter of rolling spindles: 69.85mm Max thread die diameter:210mm Variable spindle speeds: 20 -90 rpm

Condition: new, The KRM ST 20/6, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, including steel and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and an asymmetrical roll arrangement, the KRM ST 20/6 can handle even the heaviest plates with precision. The crowned and hardened rollers are suitable for processing stainless steel, while the machine boasts a motorized drive powered by a 4 kW electric motor. Control is simplified with a foot switch, and the emergency stop safety rope ensures safe operation. You can trust the central lubrication system for reliable maintenance and operation. For those looking for quality Plate Rolling Machines, the KRM ST 20/6 stands out as a solid investment. Request a quote today to enhance your sheet metal processing capabilities with this exceptional 3-Roll Motor Plate Roller. Ljdpfxsqagtis Af Eeru

Condition: used, Year of construction: 2007, pressure 20 - 300 kN adjustment of rolling slide 50 mm diameter of rolling spindle 120 mm roll spindle height over machine bed 200 mm Control SIN 840 D taper length of the roll spindle 200 mm rolling spindle turning speeds 0 - 50 1/min torque per rolling spindle 2700 Nm power capacity 2 x 8,4 kW distance between rolling spindles min. 271 / max. 368 mm Lodpfx Asw E Nmkjf Ejru rolling tool outer diameter max. 300 mm total power requirement 26 kW weight of the machine ca. 7,1 t dimensions of the machine ca. 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling / thread rolling Felsomat loader cell Complete housing

Condition: used, Year of construction: 1994, machine/vehicle number: 6613, With this roll press, you can press different materials together in a single pass. Application example: Previously, sandwich panels were Lodpfx Afewc Skge Eoru bonded and pressed with this machine. Technical data: - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1994 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: excellent (used), ORT RP 18B Thread Rolling Machine MACHINE DISCONNECTED, SOLD AS IS WITHOUT WARRANTY Lrsdjxfk Umspfx Af Eeu

Condition: excellent (used), Year of construction: 2014, 126 USED Koenig belt dough rounder, bread rounder: model BRW 2200. Year of manufacture: 2014 EXTERNAL DIMENSIONS (in cm): - L:280, - W: 70, - H: 174 cm. - working length approx. 260 cm. EQUIPMENT: Lrodew Sy A Uspfx Af Eju - flour duster - belt speed adjustment - belt pressure adjustment The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Year of construction: 2025, functionality: fully functional, thread length: 12,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 90 mm, spindle diameter: 80 mm, type of input current: three-phase, roll diameter: 250 mm, spindle speed (max.): 50 rpm, spindle speed (min.): 20 rpm, total height: 2,000 mm, total length: 2,400 mm, total width: 2,000 mm, 60 ton hydraulic thread rolling machine with swivel spindles for infeed and thru-feed rolling Lodpfx Asv Rb Apof Ejru Download PDF file for photographs

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Lrjdeihvtgjpfx Af Eju

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 1,000 kg, lifting height: 800 mm, construction height: 1,240 mm, fork length: 1,170 mm, empty load weight: 115 kg, total length: 1,725 mm, drive type: Handbetrieb, construction width: 575 mm, Scissor lift truck Lsderf Il Hopfx Af Eeru Fork width: 160 mm Fork thickness: 45 mm Technical condition: New Front tires type: Polyurethane Rear tires type: Polyurethane

Condition: used, functionality: fully functional, Year of construction: 2022, load capacity: 1,000 kg, lifting height: 715 mm, construction height: 1,250 mm, fork length: 1,150 mm, empty load weight: 104 kg, total length: 1,526 mm, drive type: Handbetrieb, construction width: 540 mm, Scissor lift truck Fork width: 160 mm Lsdpfx Afsrf Ik Te Ejru Fork thickness: 48 mm Technical condition: New Front tires type: Solid rubber Front tires Condition: 80 - 100% Rear tires Type: Vulkollan Rear tires Condition: 80 - 100%