Used Rock for sale (1,233)

Year of construction: 2022, condition: new, Width: 65535 cm Attachment suited for: Construction machines Tjdon Tm Evspfx Ab Ded Cargo space capacity: 1.800 l Rock Bucket for 30tons Excavators Edge Length: 1550mm Capacity: 1.8m^3 For detailed information and price, please contact us

Condition: good (used), functionality: fully functional, operating hours: 29,548 h, MACHINE: Rigid-frame dump truck BRAND: Komatsu MODEL: HD785-3 YEAR OF CONSTRUCTION: ENGINE: Diesel OPERATING HOURS: 29548 TRANSMISSION: Automatic Todsxn Ilnjpfx Ab Djd

Condition: like new (used), functionality: fully functional, UNUSED POWERKING HYDRAULIC ROCK SPLITTER Todov Ux R Ejpfx Ab Dsd MODEL : HRS140

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t Todpfx Abot Eacge Dsd dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: excellent (used), Oferuję używaną prasę hydrauliczną renomowanej marki Obolith, przeznaczoną do produkcji elementów betonowych, takich jak pustaki, bloczki, cegły itp. Dane techniczne: Todowpxynjpfx Ab Djd • Producent: Obolith • Typ: Prasa hydrauliczna / wibroprasa • Napęd: Elektryczno-hydrauliczny • Stan: Używana, sprawna • Zasilanie: 400V • Solidna, stalowa konstrukcja • Wbudowana forma (możliwość wymiany na inną) • Pulpit sterowniczy z wyłącznikiem awaryjnym • Możliwość uruchomienia na miejscu.

Condition: used, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg Todpfxoq Tdh Ns Ab Dsd in laboratory quality, 350x300x60mm Perpendicularity < 2µm (1") Flatness of the measuring surfaces < 1µm Slight damage to the corners, measuring surfaces are in order Measurement report on request for an additional charge

Year of construction: 2023, condition: new, Width: 165 cm Selling price: € 9.500, US$ 9.972 Tsdpfxjn Tm Dqs Ab Ded Bucket volume: 2.1 m^3 Edge Length: 1650mm Capacity: 2.1m^3 We can manufacture all type of buckets for every brand-model excavators For detailed information, please contact us

Condition: like new (used), functionality: fully functional, Year of construction: 2022, For sale: Ex Demo Digga RC Rock Combination Earth Auger, 750 mm diameter The auger includes a 1.4-meter extension. The unit was only used once for a demonstration and is as good as new. RC6 Digga augers are available with a range of different tooth options to suit most ground conditions, including earth, hard soil, shale, clay, and permafrost. In short, with the RC6, you get all the advantages of the A6 plus the superior penetration of the B7 tapered tooth head. Tsdow R Ux Uspfx Ab Dod The RC6 comes complete with general-purpose tapered teeth, ideal for combined drilling in all conditions—from soil to medium rock—delivering a clean, workable hole every time. Tooth replacement RC6 teeth are easy to install and remove thanks to Digga’s innovative knock-in, knock-out tooth locking system, eliminating the need for extra tools to change the teeth. The standard auger length is 1500 mm with a 75×75 mm square connection. New price €2,523.00 Now €1,100.00

Year of construction: 2001, condition: ready for operation (used), Motor power: 179kW, length: 9655mm, width: 2490mm, height: 2630mm, weight: 18.7t, with documentation. Tsdpfsnxk H Nox Ab Dsd

Condition: new, We offer here items that we describe as well as possible, as well as post meaningful photos. Further details about the article can not be made. STONE WOOL 10kg / per bag INSULATION WOOL FIRE PROTECTION WOOL STUFFING WOOL OVEN WOOL OVEN INSULATION MATERIAL Todpfehqrq Hex Ab Ded LOOSE WOOL OVEN INSULATION MATERIAL We offer the possibility to visit Tuesday and Friday in the time between 9 and 16 o'clock after making an appointment by phone. If necessary, the article can be taken away immediately. Due to time constraints, we can offer answers to this article only if you provide us with a telephone number in your request. This offer is, unless specifically described, NEW GOODS. Items have been visually inspected and are top ok. Prices: 19,- € net / per piece 10 kg bag with a minimum purchase of 25 bags. (current stock approx. 500 pieces) corresponds to 1,90 € net per kg rock wool If you wish other quantities, please contact us in writing. All prices are offered here as net price plus the currently valid value added tax All offers ex stock 47441 Moers. If you wish shipping, please contact us to discuss packaging and shipping costs. Item description: offered here: STONE WOOL 10kg / per bag INSULATION WOOL FIRE PROTECTION WOOL STUFFING WOOL OVEN WOOL (NEW GOODS) FURTHER NOTES see photos MATERIAL NO: 630151 EUROCLASS A1 Manufacturer: KNAUF and others

Condition: used, Year of construction: 1992, functionality: fully functional, Hard stone angle from Johannes Fischer Aschaffenburg in laboratory quality, 350x300x60mm Perpendicularity < 2µm (1") Flatness of the measuring surfaces < 1µm Slightly damaged corners, measuring surfaces are in order Tedpfx Absq Tdh Eo Djd Measurement report on request for an additional charge

Year of construction: 2022, condition: new, Field of application: Construction Width: 325 cm Attachment suited for: Loaders Warranty: 12 months Selling price: € 13.000, US$ 13.770 Tjdjn Tm Duepfx Ab Ded Komatsu WA470 Rock Bucket Edge Length: 3250mm Capacity: 4.5m^3 For other inquiries and detailed information, please contact us.

Year of construction: 2023, condition: new, Field of application: Construction Width: 328 cm Attachment suited for: Loaders Bucket volume: 5.2 m^3 Galen Group is the OEM bucket manufacturer. We can produce every type of bucket according to every model-brand machine. Machine Model: Volvo L150 Edge Type: Straight Edge Length: 3280mm Todpsn Tm Rpofx Ab Dsd Capacity: 5.2m^3 For detailed information and inquiry, please contact us

Condition: new, Machine: CAT950 Edge Length: 2850mm Capacity: 3.5m^3 Welded adapter-teeth Tsdpfjxf H Ebox Ab Dsd Bucket from STOCK

Condition: ready for operation (used), Year of construction: 2015, This Hebrock TOP 2000 PLUS was manufactured in 2015. A used edge banding machine, it features a gluing unit, cutting unit, and combination milling unit. It handles edge material thickness from 0.5 to 3 mm and can manage workpieces from 10 mm to 45 mm in thickness. Ideal for precise edge finishing tasks. Contact us for more information about this machine. Application Types Tjdsxrwf Sjpfx Ab Dod Edge Banding

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Tjdpfxsxfh Tmo Ab Djd Storage location: Nattheim

Condition: new, Year of construction: 2024, Edge Bander F4 Brand new machine Year: 2024 Edge banding machine with PLC control system (touchscreen included) and glue application system for edge materials up to 3 mm thick: - Pre-milling unit (with diamond tools) for up to 2 mm thick panels - Quick-heating glue pot with coated, maintenance-free interior - Pre-equipped for interchangeable glue pots (hot glue change system included) - High-frequency end trimming station (~12,000 rpm) Tjdsxf H Snopfx Ab Dod - High-frequency milling station (~12,000 rpm) with independent pneumatic adjustment and reversible panel saw (combined execution) - Robust feed chain - Double-roller top pressure unit (on ball bearings) - Rear window for visibility - Extendable front support arm - Feed speed approx. 10 m/min OPTIONS ON STOCK MODEL: - Quick-change device for corner milling unit (F4/08/4) - Nesting unit (for milling and radius scraper stations) (F4/27) - Pneumatic adjustment on three points (straight, bevel, radial cuts) (F4/30) - Internal LED lighting (F4/32)

Condition: used, Year of construction: 2003, Technical details: volume capacity: 1,00 m³/min Electric capacity: 0,17 kw electrics - voltage/frequency: 220-230/50 V/Hz protection class: IP20 air pressure: min/max:15/45 bar weight: 38 kg dimensions L x W x H: 600x450x550 mm nominal power of the dryer: - pressure connections 3/8" Tedpfx Abou Nzw Is Djd - refrigerants R 134a - removal of condensate G - PED 97/23/EC - TSL 2°C - TSH 60°C The mentioned details are relating to a operation pressure of 40 bar, of a aior pressure entrance temparature of 25 °C, such as an ambient temparature of 25°C CE statement available. Copy of documentation available. *

Condition: excellent (used), Hebrock F4 Edgebander Well-equipped, possibility to inspect before purchase. Pre-milling cutters, Glue application by roller, Equipped with glue drain, Interchangeable glue pot Pneumatic pre-cut guillotine, Pressure rollers, Trimming saw for final cut, Top and bottom milling unit, R1–R2 pneumatically adjustable, Profile scraper, Corner rounding unit, pneumatically adjustable, Flat scraper, Max workpiece height: 50 mm, Max edge band thickness in roll: 3 mm, Feed speed: 7 m/min, Tsdpfx Aoxq A Ebjb Djd Power requirement: 7.4 kW, Machine inspected, ready for testing, in very good condition. Only 5,000 meters of use. Leasing purchase possible.

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 700 kg, total length: 2,860 mm, total width: 1,230 mm, construction height: 1,700 mm, Fully operational exhibition dryer, Ø 1090 mm We are offering our fully operational exhibition dryer with a diameter of 1090 mm. The unit is very compact and practical in terms of required space and easy relocation. Technical Details: Connection: only a water connection for spraying and a 16A power plug are required Heating system: 4 kW electric heater Wood moisture measurement at 3 measuring points Plug-and-play design – ready for immediate use Advantages: Ideal for small carpentry workshops Easy to transport and flexible positioning Tjdpfx Asxbz Hrsb Djd

Condition: like new (used), functionality: fully functional, operating hours: 2 h, IR tunnel dryer (electric dryer) with quartz tube, width: 90 cm, heated section 240 cm, max. temperature 200° C, 32 A plug. The unit is in like-new condition, only used 1-2 times for demonstration purposes. The original price is €10,500 net. The dryer is located at our company hall in Bruchweiler-Bärenbach and can be inspected and tested at any time. Tedow N Rw Depfx Ab Djd

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Todowmf E Sspfx Ab Dsd Storage location: Nattheim

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Todelht Hwepfx Ab Dod Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Year of construction: 1981, condition: used, Technical details: height over floor: 850 mm total power requirement: 2,5 kw temperature: 200 °C voltage: 220/50 V / Hz weight of the machine approx.: 80 kg space requirement of the machine approx.: L:0,85xB:0,6xH:1,15 m Application area: drying device internal dimensions: W: 0,50 x T:0,42 x H:0,60m door opening : W:500 x H:600mm The internal room does have 3 shelves ( depth 370 x W: 490mm) upper shelf inlet has been taken out, because the thermometer gets deep into the room ( see picture / comparable) Oven has been tested up to 160°, with limitation on sale, 2 heating rods up are OK and 2 heating rods down are not working! * Tedpfeu N Agkjx Ab Dsd

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Tjdpfei Am U Dex Ab Ded Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)