Used Robot For Milling for sale (12,155)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 14.22.02.24, overall weight: 1,523 kg, load capacity: 1,500 kg, table height: 1,460 mm, This is a two-axis rotary table for robots of the KUKA brand Kodpottvtrsfx Affsfa Diameter of the plate: Length: 990mm Width: 995mm Table height: 1460mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, cloos robot Qirox 350 incl. control QC 2 touch sensor, seam tracking, point editor Kedpjx Iu R Hefx Affsfa rotary gallow welding machine cloos qineo puls 451, wirde drive, torch, torch hose package 2 light beams, 2 start pre selections manipulators on request

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Kfedpfxsx Iugue Affsa Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, Rotary table 1,250 x 1,400 mm (interference circle 1,700 mm) Heidenhain 530 Diagonal milling head with 1° x 1° indexing Speed up to 5,000 rpm Tool holder SK50 Tool changer with 40 positions Internal coolant supply with 19 bar Chip conveyor in longitudinal direction Kedpfx Afox Iuccefjfa

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Kfedpsw Rlvqsfx Affea Geometric acceptance with test report Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power output at 50 Hz: 4.4 kW, 2890 rpm -Power output at 100 Hz: 6.6 kW, 5860 rpm -Hole: Ø 35 mm -Tool: Ø 250 mm Kodpfx Aeb A Idijffefa -Number: 3x motors available Price: per piece (other types of engines also available) -Dimensions: 560/240/H160 mm -Weight: 50 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, load capacity: 30 kg, arm reach: 2,033 mm, Finer gears are used in constructing the high-accuracy Kuka KR 30 version for precision laser, welding, and machining applications. High precision performance was the goal when designing the Kuka KR 30 HA KRC2.The repeatability of the KUKA KR 30 HA robot is 0.05 mm Model: KR60 L30 HA Condition: USED Year: 2012 (2010 Option is also available) Kfsdeq Hd Ucepfx Affsa Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant Not Included: Gripper & The Base Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 2 Cloos welding robots Qirox QRC 320 incl. control V 6, cooling unit, socket for robot, 2 cloos welding machines cloos qineo champ 600, wire drive, welding torch, torch hose package, 2 station turning table incl. turning-tilting table consisting of 2 c bows with turning devices WP-DH-TSC-5 kN, load capacity/station 500 kg, distance of the surface plates 1500 mm, swing radius about 750 mm. Manax ( manually control of the turning device in the loading station) safety wall on turning table, 2 swing doors 1 light beam, 1 start pre selection, touch sensing, parameter interpolation, point editor, Master slave control of robots, CTMS autom. TCP control, Machine will be completly overhauled before delivery. Kjdetrdlpjpfx Affofa

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00555, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iB/210F manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/210F Model Number: A05B-1329-B205 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.3 Ksdpfxox Ithws Affofa Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1240   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.12 RCC Length (m): 14   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 Kfedpfx Afsx It Rxefsa with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture.

Condition: good (used), Industrial robots, robots -Payload: 2 kg -Control: Siemens RCM Ksdpfxeb A I Aqo Affofa -Max. working range: 800 mm -Empty weight: 670 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, load capacity: 60 kg, arm reach: 2,033 mm, Kuka KR 60 robots are known for their adaptability and flexibility to a variety of applications. They can be precisely programmed offline, are very dependable for process planning, require little maintenance, and are equipped with motors and gearboxes that ensure high performance in cycle times and accuracy. The repeatability of the KUKA KR 60 HA robot is 0.05 mm. Some common applications: - Additive Manufacturing - Assembly - Depalletising - Palletising - Material Handling - Dispensing Model: KR60 (L30) HA Pay Load: 30kg or 60kg Arm Reach: 2033mm or 2429mm Condition: USED Year: 2013 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant + 8m Linear Track Not Included: Gripper Linear Track Model: KL 1000/2 Year: 2013 Kfjdpfxoq Nnpus Affsa Length: 8 meters Condition: USED, well working Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Kfsdpeb A Nl Uefx Affea -Motor: 1.5 kW 2840 rpm at 50 Hz -Shaft mounting: Ø 15 mm -Weight: 12 kg

Condition: like new (used), functionality: fully functional, total length: 400 mm, Suitable with: KRC2 KR210 series and KR150 series Kodjq Hd Sdepfx Affofa Length: 40 cm (makes KR210 a KR210 L150) Condition: Refurbished and repainted to KUKA's orange

Condition: good (used), Year of construction: 1981, Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm Kfsdpeb A Hfqjfx Affea -Weight: 60 kg

Condition: like new (used), Year of construction: 2005, functionality: fully functional, load capacity: 210 kg, arm reach: 2,700 mm, Model: KR150 L130 Condition: Refurbished with 1 year of warranty Kjdpfx Asq Dp Aasffsfa Welding Machine: NEW Megmeet Welding Machine FK4000-R + Arc Welding Gun Year: 2005 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant + Arc Welding Set Not Included: 7th Axis and 7th Drive is not included in the price but can be offered with extra pricing, engineering consultancy As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific welding needs.

Condition: good (used), Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz Kjdob A Im Repfx Affsfa -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Condition: refurbished (used), Year of construction: 2010, operating hours: 25,000 h, functionality: fully functional, load capacity: 200 kg, arm reach: 2,400 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: Kfjdsgi Dztspfx Affoa - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Contents: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant + 2 Spindle Motors ( Set with Mechanical System ) + Electrical Panels + 2 Servo Drives + Cable Set + 8 DI / 8 DO Shipping: NOT included in the price Payment: 100% payment prior to collection

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor Kfjdpob A Igpjfx Affsa -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 4x motors available Price: per piece -Weight: 6 kg/piece

Condition: refurbished (used), Year of construction: 2010, load capacity: 200 kg, arm reach: 2,400 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing Kfodpfsq Dpxdox Affja - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200-3 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Included: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant +1 Hertz Spindle Motor (New) + Delta Spindle (Set with the Mechanical System) + Tool Changer Table Not Included: 7th Axis, Engineering Design and Consultancy Shipping: NOT included in the price Payment: 100% payment before collection

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 2740 rpm at 50 Hz Kedpfx Afsb A Ix Tjfofa -Shaft mounting: Ø 20 mm/M16 mm -Motor: mounted on guides -Travel distance: 160 mm -Weight: 30 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides -Number: 2x motors available -1x: right-hand thread -1x: left-hand thread Price: per piece Kfjdpfx Aob A Nmdjffja -Weight: 20 kg/piece

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Overall dimensions: 340/130/H220 mm Kfodpfob A Nl Ijx Affoa -Weight: 18 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter Kfodpfxeb A Nlxe Affja -Motor: mounted on guides -Number: 3x motors available Price: per piece -Weight: 5 kg/piece

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Kfsdpfjb A Nm Sox Affea -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg