Used Rip Fence for sale (2,417)

Condition: good (used), Year of construction: 1996, functionality: fully functional, Roller conveyor with rip saw and outfeed table motorized roller conveyor6m rip saw, pneumatic control, 400mm saw blade Codouvdfmepfx Aiiehd Outfeed roller conveyor with pneumatic side pushers, 10m Feed table 5 x 10m with cross conveyor

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 117, saw blade diameter: 800 mm, cutting height (max.): 300 mm, input voltage: 400 V, saw drive: 15,000 W, operating pressure: 6 bar, Solid and powerful machine for carpentry and timber construction. Longitudinal cuts up to 300 mm cutting height. 800 mm saw blade for a large cross-cutting range, mounted on a rotary table. This allows nearly any mitre angle to be set. Longitudinal cuts, trimming, notching, wedge planks – everything is possible. The double-sided feed system effortlessly processes even large beams through the machine. In cross-cutting mode, the feed pistons serve as hold-downs. Two-hand operation ensures safe usage. The integrated support in the machine provides 3 m roller conveyors on both the left and right sides. The support options can be expanded by using tall, stable 3-roller supports (optional). The machine is tested and in good condition. Both digital displays including sensors are new (repairs alone cost €5,000). Many hoses have been replaced. The pneumatic unit has been serviced. Everything else was in excellent condition due to the machine's robust design! Cjdpfjv Nktbjx Aiishd

Condition: good (used), Year of construction: 2009, Edger and panel saw in one machine. Max. cutting length: 6.2 m Max. cutting width: 2.1 m Chjdpfx Aijz Abpieisd Max. cutting height: 120 mm With alignment laser for the cutting line 2 clamping devices, left and right 6 retractable cross-feed chains in the rear table Saw motor: 11 kW

Condition: refurbished (used), functionality: fully functional, Refurbished Primultini double-arbor multi-rip saw, model MRA, for ripping timber lengthwise. The machine has a 110 kW motor on each of the lower and upper arbors, inverter-controlled variable feed speed (8–45 m/min) and a control panel with a 10.4" touchscreen. Arbor position, cutting thickness and feed speed are shown on an electronic display. The photos show the actual equipment offered. Cjdpfoz S Azksx Aiijhd Technical data: Maximum cutting height: 160 mm Maximum cutting width: 550 mm Minimum workpiece length: 1500 mm (1200 mm with wooden comb) Minimum workpiece length: 800 mm Conveyor belt width: 600 mm Passage width: 850 mm Motor power (lower and upper arbor): 2 x 110 kW Saw blade rotation speed: 3500 rpm Feed motor power: 5.5 kW Variable feed speed with inverter: 8–45 m/min Electric arbor and press movement Pressure rollers with pneumatic pistons and adjustable pressure Centralized automatic lubrication Control panel with 10.4" touchscreen Electronic display of arbor position, cutting thickness and feed speed Electronic device for automatic feed speed deceleration in case of high power absorption by the 2 main motors PLC with touchscreen

Condition: used, Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Csdpfxjzryu Ns Aiiohd Technical data: - Cutting length: max. 380 mm

Condition: good (used), For sale: a professional, very heavy-duty, and stable twin-blade hydraulic saw from the renowned Turkish manufacturer RULMAK, model RM.HCD.1. The machine is designed for continuous operation in demanding sawmill environments – ideal for quickly cutting thick timbers, blocks, and producing pallet components or garden furniture elements. Chsdpfx Aiezdwhkoiod ⚙️ Key Features of the Machine: Smooth feed rate adjustment via a frequency inverter: Ensures precise and rapid adjustment of the feed rate (controlled from the control panel) to the hardness and dimensions of the wood being processed. Extremely powerful main motors (2 x 75 kW): A total of 150 kW of power guarantees that the machine will not slow down even under maximum load and when working with hard, wet, or frozen material. Substantial weight (5500 kg): The very heavy, stable frame made of thick-walled steel effectively dampens all vibrations, which translates into perfect quality of the cut material and a longer service life of the bearings and blades. 📊 Full Technical Specifications: Manufacturer: RULMAK Model: RM.HCD.1 Year of manufacture: 2007 Design: Twin-blade (upper blade + lower blade) Power supply: 400 V / 50 Hz

Condition: excellent (used), FENCO Multitubular Aseptic Sterilizer – Stainless Steel FENCO multitubular aseptic sterilizer, designed for the continuous thermal treatment and sterilization of liquid, semi-liquid, and viscous food products in aseptic processing industrial lines. The equipment uses a tubular/multitubular heat exchange system that allows for the indirect and controlled execution of the different phases of product heating and cooling. This technology is especially suitable for processes where precise thermal treatment is required before storage or aseptic filling. Its configuration with multiple tubular sections in stainless steel provides a large exchange surface and allows for the integration of different thermal stages within a single continuous process installation. MAIN FEATURES -Manufacturer: FENCO -Type: Multitubular aseptic sterilizer -Technology: Tubular/multitubular heat exchange -Continuous thermal treatment Chsdpfx Aiszw E R Teiod -Indirect product heating -Heating and cooling sections -Multiple heat exchange modules -Stainless steel construction -Sanitary product connections -Integrated piping and valve system -Process pumps -Self-supporting industrial structure -Designed for aseptic processes -Integrable into complete aseptic processing and filling lines PROCESS The FENCO aseptic sterilizer is designed to circulate the product continuously through different heat exchange sections. Depending on the process configuration, the product can pass through preheating, heating, sterilization, holding, and cooling stages, controlling the necessary conditions before being transferred to a storage tank or aseptic filling system. Indirect exchange allows the treatment to be carried out while keeping the product separate from the heat transfer fluid. It can be integrated with: Preparation tanks Sanitary pumps Homogenizers Deaerators CIP systems Aseptic tanks Aseptic fillers Complete UHT/aseptic lines APPLICATIONS Especially suitable for the fruit and vegetable, tomato, juice, puree, concentrate, sauce, and other pumpable food industries that require continuous sterilization before aseptic packaging. Depending on its configuration, it can be used with fruit juices, pulps, and purees, concentrates, tomato products, sauces, and other liquid or viscous products. The combination of FENCO technology, multitubular exchange, and sanitary stainless steel construction provides an industrial solution for continuous sterilization and aseptic production processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Type: ZF 2 Manufacturer: WAFIOS Year of manufacture: - Serial No.: 2.1062.013 Capacity: 45 weft wires/min = 3.712 m Linear wire diameter: Core: 1.6 mm / Outer diameter: 2.6 mm Weft wire diameter: Core: 2.6 mm / Outer diameter: 3.6 mm Tensile strength: 600 – 700 N/mm² Number of twists of the 3 line wires: Crimp pitch: 19.14 mm Linear wire spacing: 153 mm Weft wire spacing: 82.5 mm Max. braid height: 1,250 mm Condition of the machine(s): Used, dismantled Codpfswr Akcsx Aiishd

Condition: good (used), Year of construction: 2011, beautiful rip saw with max. 8 m cutting length max. width 1.9 m max. cutting height 160 mm motor 11 kW with laser for cutting joint display Csdpswrb Rusfx Aiishd with integrated pressure beam

Condition: used, Year of construction: 1980, used, in excellent condition Manufacturer: Raimann Type: K 23 Year of manufacture: 1980 Engine power: 37 kW Track width: 250 mm Cutting width: approx. 230 mm Cutting height: approx. 120 mm without pressure comb / with 110 mm Feed rate: max. 8 - 35 min, infinitely adjustable Saw blade diameter: 360 mm x 80 mm bore Shaft diameter: 65 mm Workpiece length: min. 290/750 mm Dust extraction connection: D 200 mm Space requirement: approx. 2400 mm x 1500 mm x 1600 mm Weight: approx. 2100 kg Csdpfx Aisxuv Nuoiehd Total connected load: approx. 75 A Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition, as inspected Without warranty

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 450 mm, saw blade diameter: 450 mm, working width: 870 mm, track width: 450 mm, chain width: 450 mm, disc diameter: 450 mm, – very good condition – manufactured in the Czech Republic – year of manufacture: 1998 TECHNICAL SPECIFICATIONS: – track width: 450 mm – cutting height: 160 mm – max. blade diameter: 450 mm – main motor power: 45 kW – min. cutting length: 800 mm – max. input material width: 870 mm – shaft diameter: 65 mm – sleeve diameter: 80 mm Cjdjxtabxopfx Aiiohd – feed adjustable via frequency inverter – feed speed range: 4-40 m/min – three rows of anti-kickback pawls – connection spigot diameter: 300 mm – dimensions (L/W/H): 240 x 210 x 200 cm – weight: 3300 kg

Condition: used, functionality: fully functional, - Manufacturer: MEZ Frenštát p. Radh. - Type: F200 Cedoxa Evzjpfx Aiijhd - Motor power: 30 kW - Single-shaft design - Max. height of processed material: 120 mm - Min. length of processed material: 2 m

Year of construction: 1972, condition: good (used), working width: max. 1.700 mm number of length wires: max. 16 wire diameter length wires; 2,5 - 3,25 mm Cjdpfjg Ryvwex Aiiohd wire diameter edge wires: max. 3,25 mm wire diameter knot wires: max 3,2 5mm

Condition: used, power: 11 kW (14.96 HP), cutting height (max.): 170 mm, total length: 5,850 mm, total width: 2,000 mm, total height: 2,040 mm, overall weight: 3,500 kg, No. 04548 Rip saw / longitudinal circular saw MABA ECO 4200 Used, good condition Automatic longitudinal circular saw with extraction system Cutting length 4200 mm Motor 11 kW Saw blade diameter 350 - 550 mm Saw blade bore 30 mm Hydraulic feed 1 - 80 m/min, infinitely variable, with automatic cutting pressure compensation Cutting height 0 - 170 mm, infinitely variable, circular saw blade lowerable Automatic width stop, hydraulic, infinitely adjustable, LED display for width setting PLC control Rear table width approx. 1500 mm Extraction connection diameter 150 mm Transport dimensions approx. 5850 x 2000 x 2040 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale Chedpfozcdn Nox Aiisd For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 2018, cutting width 300 mm Cutting height 10-120 mm Chain width 300 Cedpfx Aiey Ehzmjiehd Motor output 22 kW

Condition: good (used), Year of construction: 2016, operating hours: 11,800 h, load capacity: 1,500 kg, lifting height: 4,600 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, Year of construction: 2016 Field of application: Internal logistics Codpfx Aio Ah Dp Tsijhd

Condition: good (used), Year of construction: 2007, operating hours: 18,100 h, load capacity: 3,000 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, Linde H30D triple 480 Freelift / Sideshift / Fork adjuster, 2007, VW Diesel. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on-site. Chsdpfjzf Hv Hox Aiijd Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2011, Technical Specifications (Spark 2530) • Plate size: up to 25” x 30” (635 x 762 mm) • Resolution: 2,000–4,000 ppi (up to 10,160 ppi for security) • Software: Grapholas CDI, supports 1-bit TIFF & LEN files Codpfx Asw Tc Uieiiohd • Dimensions: W 1,600 mm · D 870–1,180 mm · H 1,070 mm • Weight: 1,000 kg

Condition: good (used), Year of construction: 2016, operating hours: 9,113 h, load capacity: 2,500 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, Linde H25D-02 Triplo 550 Freelift / Sideshift / Fork Adjuster, VW Diesel, 2016 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. Cods Ahyykspfx Aiijhd All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 1982, condition: used, In Good Condition Chsdpfxjdq Ug Is Aiisd

Condition: used, Used Machine Features and Technical Specifications: - High-performance multi-blade saw - Heavy-duty cast iron construction - Robust feed chain consisting of precision links connected directly to one another - Wear-resistant guide surfaces on the feed chain with an extremely low coefficient of friction - Automatic chain lubrication - 4-point saw shaft bearing arrangement for maximum stability - Saw sleeve with tapered seat and self-centering mechanism - 4 pressure rollers for precise cuts even with thin workpieces - 4 rows of slitter and deflector fingers - Cutting height up to 110 mm with a 350 mm saw blade diameter - Minimum cutting length 250 mm - Clamping width of the saw sleeve: 300 mm - Min. and max. saw blade diameters: 200/350 mm - Saw shaft speed: 4,200 rpm - Feed speed: 4–48 m/min - Conveyor chain width: 300 mm - Saw bush diameter (with 2 wedges, 20 x 5 mm): 70 mm Codpfx Aszk N Ucsiijhd - Work table height: 750 mm - Exhaust connection diameter: 200 mm - Airflow at 25 m/sec: 3,500 m³/h - Motor: 25 kW - Feed motor: 1.1 kW - With laser alignment beam - Sound emission: 98.3 dB(A) at idle without dust extraction - During operation: 107.1 dB(A) - Workplace-specific emission level: 81.8 dB(A) at idle without dust extraction - During operation: 91.2 dB W(A) - Dimensions: 170 x 140 x 190 cm - Weight: 1,800 kg

Condition: good (used), Year of construction: 1990, load capacity: 2,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,150 mm, Komatsu FD20T-11E Triplo 450 Freelift / 3rd Function Diesel 1990 A video can be sent via WhatsApp. We have a continuous supply; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make an appointment for a viewing and/or test drive without any obligation. Cedpe Ahivujfx Aiishd Please call in advance as we are not always available. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, Year of construction: 2026, I am selling a KUSING RP-OP-600 PRO rip saw. This is a top-of-the-line rip saw with one or two simultaneously digitally adjustable saw blades. The control has a memory with 5 values for faster and more precise work on the machine. The machine has both upper and lower traction using six steel traction rollers to ensure maximum traction even when processing thicker materials and prisms up to a maximum height of 105 to 130mm. The machine can be equipped with any number of blades with a clamping system using sliding housings for quick change of dimensions. Technical parameters: Input width: 700 (up to 900mm) Feeding roller length: 600mm Number of pulling rollers: 6x Cedpfx Aisx Utyyeishd Maximum cutting size: 550mm (700mm) Main motor power: 11 / 15 / 18 kW Max. Disc diameter: 350mm Maximum cutting height: 105 mm (130 mm) Shaft diameter: 50mm Shaft length: 600mm The machine meets all safety requirements for CE standards. The machine is made in Slovakia. Possibility of configuring the machine according to requirements, whether it is the number of lasers, selection of input and output roller paths, etc.

Condition: good (used), Year of construction: 2013, operating hours: 17,150 h, Linde H30D-02 Triplo 480 Freelift / Sideshift / 4th Fork Spreader, VW Diesel, 2013, 17,150 hours, DIESEL. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Chedpfxszxq Sre Aiisd Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2011, operating hours: 8,593 h, load capacity: 2,000 kg, lifting height: 4,900 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, Hyster H2.0FTS Triplo 490 Freelift / Sideshift LPG 2011 A video can be sent via WhatsApp. We have a continuous stock; please visit our website. Prices are quoted ex works Nuland. Chjdo Ahivqepfx Aiied Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland