Used Ring Bending for sale (41,405)

Condition: used, Year of construction: 1993, Technical details: tube diameter: 80 mm tube diameter min.: 6 mm control for program: Gelma MM-1 tube pipe draw up length: 1800 mm weight of the machine ca.: 0,232 t dimension machine xH: 1,9 x 0,7 x 1,3 m Semi-automatic PIPE BENDING MACHINE Operating modes are manual but also semi-automatic Application: for multiple bending of pipes The swivel unit with bending preselection for 3 different bending angles in single and automatic mode. The machine is currently equipped with a stop bar for tube size Ø 10mm for 6 angle settings. The bending machine is movable/adjustable. Iaedpfx Asu Ibyyjh Njl Equipment/accessories: 6 cam rods/stop rods 6 control disks Bending tool for Ø 12mm *

Condition: good (used), Year of construction: 2000, 1 used 4-roll sheet metal bending machine Brand: Stöting Type: VB 322 Serial number: 1591 Year of manufacture: 2000 With Acon control system Working length: 1000 mm Maximum sheet thickness: 12 mm Bending capacity: 8 mm Top roll diameter: 250 mm Bottom roll diameter: 210 mm Side roll diameter: 169 mm Dimensions: L: 3200 mm Isdpfxjv Ibkbs Ah Nsal W: 1370 mm Height (without support arm): 1370 mm Drive power: 6.5 kW Weight: 3.2 tons

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 1,020 mm, folding beam adjustment: 46 mm, bending angle (max.): 135 °, overall weight: 340 kg, total length: 1,350 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Upper and lower blade removable in segments Including manual back stop PNEUMATIC CYLINDER !!! Max. zetcapaciteit over de hele werklength ----- 2.5 mm Max. working length ----- 1020 mm Max. opening width ----- 46 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. angle of attack ----- 0 - 135 Weight ----- 340 KG Iaedpjga T A Dofx Ah Nsl Width ----- 1350 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: good (used), Year of construction: 1987, machine/vehicle number: 6003-87, Offer 24203 Technical Data Iedjx S En Dopfx Ah Njal - Two driven lower rollers, each roller individually motor-controlled - For pre-bending - Side supports or swing-out bearing pedestals - Motorized lifting and lowering of the upper roller - Operation via separate control panel - Max. working width: 2050 mm - Max. sheet thickness at 400 N/mm²: without pre-bending 4 mm; with pre-bending 3 mm - Smallest possible bending diameter: approx. 400 mm - Upper roller diameter: 150 mm - Each lower roller diameter: 140 mm - Drive power per lower roller: 400 V / 7.5 kW - Working speed: approx. 5 m/min - Working speed with pre-bending: approx. 0.5 m/min - Space requirement: approx. W 3300 x H 1500 x D 1300 mm - Weight: approx. 2.5 t

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Iasdjndn Agjpfx Ah Nol Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: good (used), functionality: fully functional, Year of construction: 2017, number of rollers: 3, Used Akyapak profile bending machine type APK 81 80mm shafts – digital – hydraulic – standard tooling – hydraulically controlled side guides Iedex Sxu Ropfx Ah Nsal

Condition: used, Year of construction: 1960, Technical details: sheet width: 2000 mm plate thickness: 4 mm distance between columns: 2070 mm roll dia. top roll: Ø142 (getrieben) mm diameter of lower rolls: 1. Walze Ø 145 (getrieben) mm diameter of lower rolls: 2. Walze Ø 145 (mitlaufend) mm adjustment of lower rolls: manual/mech./hydr.: 1. Walze ca. 20 mm von Hand adjustment of lower rolls: manual/mech./hydr.: 2. Walze ca. 180 mm von Hand height over floor: 950 mm total power requirement: ca. 4,0 kW dimension machine xH: 3,0 x 1,0 x 1,2 m weight of the machine ca.: ca. 2,5 t Mechanical 3-roll plate bending machine Operation: Iaedsu Icfwopfx Ah Njl Hand switch / foot switch forward/backward 2x EMERGENCY button *

Condition: used, Automatic Tube Bending Machine Brand: B.L.M. Model: B/90/M Description: Automatic tube bending machine designed for industrial applications, equipped with automatic programming for producing multiple bends in sequence. The machine allows adjustment of the reference distance, ensuring high precision and repeatability in the bending process. For all technical details, please refer to the technical data sheets available in the photos. Ijdpfjx Swbijx Ah Neal

Condition: new, functionality: fully functional, control type: manual, working width: 1,020 mm, folding beam adjustment: 48 mm, bending angle (max.): 135 °, overall weight: 320 kg, total length: 1,350 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Finger stitching machine with segmented top clamp Including manual back stop PNEUMATIC CYLINDER !!! Max. bending capacity over the entire working length ----- 2.5 mm Max. working length ----- 1020 mm Iaodpsga T Ddsfx Ah Nol Max. opening width ----- 48 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. angle of attack ----- 0 - 135 Weight ----- 320 KG Width ----- 1350 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: good (used), Profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press -Bending/straightening press: hydraulic profile bending machine -Base: solid construction, mobile -Hydraulic unit: unfortunately without type designation -Piston rod: Ø 55 mm / stroke: 200 mm -Individual components: see photos -Total dimensions: 1180/1060/H1000 mm -Weight: 445 kg Isdpfx Ahet Hmhlj Noal

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. Iaedpfx Ajng Exaoh Nol The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: ready for operation (used), Year of construction: 1979, Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg. Iaodstvar Iopfx Ah Nel

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 9314, controller model: Beckhoff mit Addison DataBend, wall thickness: 3 mm, working length: 6,000 mm, workpiece diameter (max.): 76 mm, Equipment: CE marking, TECHNICAL DETAILS Max. diameter: 76 mm Max. wall thickness: 3 mm Max. bending length: 6,000 mm MACHINE DETAILS Control: Beckhoff with Addison DataBend Dimensions & Weight Dimensions (L x W x H): 8,000 mm x 2,000 mm x 2,000 mm Transport weight: 6,100 kg Transport packages: 1 EQUIPMENT incl. several mandrels and bending formers Documentation Iedpfxex Rbf Ns Ah Noal CE marking

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 6713-2023-2009, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, total length: 6,500 mm, total width: 1,000 mm, total height: 1,400 mm, power: 5.2 kW (7.07 HP), Tube bending machine Gelber Bieger Type: S03-60 Year of manufacture: 2009 Diameter: 03-60mm Length: 6m Electromechanical drive of the bending axis PLC control Bending angle resolution: 0.1° Electronic length and torsion measurement Manual stop system with overrun stops Torsion indexing: 15° increments Hydraulic tube clamping with adjustable clamping pressure Programmable mandrel retraction Three-jaw chuck Reinforced mandrel support extension up to 6m Iedpfx Ahexuii Uo Njal Tube bending software Including tooling for the following diameters: 50mm, 42.5mm, 40mm, 35mm, 30mm, 25mm, 20mm Collection ex works, unpacked

Condition: new, functionality: fully functional, Year of construction: 2024, control type: manual, working width: 1,270 mm, folding beam adjustment: 46 mm, bending angle (max.): 135 °, sheet thickness (max.): 2 mm, back gauge adjustment: manual, back gauge: 760 mm, overall weight: 380 kg, total length: 1,600 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Upper and lower blade removable in segments Including manual back stop PNEUMATIC CYLINDER !!! Max. bending capacity over the entire working length ----- 2 mm Max. working length ----- 1270 mm Max. opening width ----- 46 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. angle of attack ----- 0 - 135 Weight ----- 380 KG Width ----- 1600 mm Depth ----- 850 mm Height ----- 1175 mm Iajdpfx Ahsga T A Ij Nel

Condition: new, Year of construction: 2025, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2000/0.8 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: Iedpfxeqy I Epe Ah Noal -Working width 1400mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 125kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Iodpsvk Scgjfx Ah Njal Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: new, Year of construction: 2025, roller diameter: 90 mm, working width: 700 mm, sheet thickness steel (max.): 35 mm, - Capacity 700 x 3.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - 2 speeds - Conical roller - Swiveling top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V Iajdpjr Ign Rjfx Ah Nol

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 095, overall weight: 500 kg, table width: 830 mm, table length: 1,250 mm, stroke length: 300 mm, bending force (max.): 30 t, TECHNICAL DETAILS Max. stroke: 300 mm Iaedpex Rbdxjfx Ah Nol Capacity: 30.0 t Table width: 830 mm Table length: 1,250 mm MACHINE DETAILS Motor power: 4.0 kW Control type: Siemens CNC Dimensions & Weight Dimensions (L x W x H): 1,300 mm x 800 mm x 1,700 mm (l x w x h) Transport weight: 500 kg Transport packages: 1 EQUIPMENT Documentation CE marking

Condition: used, Brand:CASANOVA Model: PCV 35- 3 RODILLOS Isdpovx A Amjfx Ah Njal Descritción • Capacity 3050 x 20 mm • Voltage 400v/50h • Weight 15000 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 2,000 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, back gauge adjustment: manual, overall weight: 540 kg, total length: 2,400 mm, total width: 850 mm, total height: 1,175 mm, Finger setter with segmented top clamp PNEUMATIC CYLINDER !!! Including manual back stop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of fingers ----- 38 | 38 | 50 | 50 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 mm Iaedpsga T Dpsfx Ah Nsl Max. angle of attack ----- 0 - 135 Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: good (used), functionality: fully functional, rotary table diameter: 650 mm, table diameter: 650 mm, Glauchau Horizontal Spindle Ring Grinder Ijdpfx Aoxxyvmoh Noal With 650mm dia. Magnetic Chuck

Condition: used, functionality: fully functional, machine/vehicle number: 86, SECOND-HAND BENDING PRESS CERVINO - Platens dim. mm. 3500X1370 Iaedpfex Rrftjx Ah Nol - Opening mm. 1000 - S/N 86

Year of construction: 2025, condition: new, - Panel width 710 mm Iedpfxjh Ramgj Ah Neal - Backgauge - Adjustable stroke

Condition: used, functionality: fully functional, SECOND-HAND BENDING PRESS COLOMBO - Platens dim. mm. 3400X1290 - Opening mm. 800 Iaedpfx Ajx Rrfash Nsl