Used Residual Wood Shredder for sale (7,867)

Condition: excellent (used), CATALOGUE NUMBER 8068 Technical specifications: - chipper inlet cross-section: 410mm x 180mm - shaft width: 430mm - shaft diameter: 430mm - number of knives: 2 pcs - screen dimensions: 50/50mm, 50/130mm Nledpjzukyhofx Ahkef - top feed roller, toothed - bottom: 2 feed rollers, toothed - length of the feed belt: 3750mm - width of the feed belt: 380mm - auto-reverse (adjustable) - main motor: 22kW - feed motor: 2 x 1.5kW - machine dimensions (L/W/H): 5900x1500x870mm - weight: approximately 2000kg Advantages: - Polish-made - auto-reverse (adjustable) - with conveyor belt - DTR documentation - used chipper, very good condition Net price: 64,900 PLN Net price: 15,452 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7973 TECHNICAL DATA - feed opening width: 410mm - feed opening height: 210mm - shaft width: 430mm - shaft diameter: 330mm - knife length: 430mm - number of knives: 2 pcs - screen dimensions: 50x50mm - lower toothed feed shaft - lower shaft motor: 1.1kW Nljdpfx Asztq Suohkef - upper toothed feed shaft - upper shaft motor: 1.1kW - vibrating chute - vibrating chute length: 4160mm - vibrating chute width: 370mm - main motor: 45kW - auto-reverse (adjustable) - reverse mode - machine overall dimensions (L/W/H): 2150x1450x1050mm - vibrating chute overall dimensions (L/W/H): 4160x650x880mm - weight approx. 2500kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload – Reverse mode – DTR technical documentation – Used shredder, in very good condition Net price: 73,900 PLN Net price: 17,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 8067 Technical data: - inlet width 400mm - inlet height 200mm - shaft width 540mm - shaft diameter 520mm - knife length 540mm - number of knives 2 pcs Nodpszuku Eofx Ahkolf - screen dimensions 55x55mm - 2 geared drive shafts from below - motor for lower shafts 4kW - geared drive shaft from above - motor for upper shaft approximately 1.5kW - feeder belt length 3000mm - feeder belt width 400mm - main motor 45kW - automatic reversing (with adjustable setting) - dimensions L/W/H 5900x1800x1200mm - weight approximately 3500kg Advantages: - German-made - with belt feeder - automatic reversing (with adjustable setting) - used shredder, very good condition Net price: 68900 PLN Net price: 16405 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: good (used), functionality: fully functional, Rotor approx. 250 mm Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Nljdpfxsy A Rqls Ahkef Motor 18.5 kW Technical data on request

Condition: good (used), Year of construction: 1992, Chipper with hydraulic walking floor Nlsdpowv Hmvefx Ahksf Rotor width 700 mm Motor 11 kW Screen with 16 mm perforation No PLC installed yet Partially overhauled New rotor bearings

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 75 kW (101.97 HP), COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – Year of manufacture 2011 For sale is a complete waste wood disposal plant by Rudnick & Enners, built in 2011. The line consists of 20 components and was used for the automatic removal, sorting, and processing of edgings, wood chips, and residual wood in a sawmill. The system has a modular design, is dismantled, in very good condition, and available immediately. Technical Overview – Positions 1 to 20 01 – Crooked chain conveyor from reducer, W 600 mm 02 – Vibrating chute 1-edging line, L 13.0 m, W 650 mm 03 – Vibrating chute 2-edging line, L 15.0 m, W 650 mm 04 – Vibrating chute frame saw line, L 8.50 m, W 500 mm 05 – Vibrating chute 1-frame saw line, L 10.0 m, W 500 mm 06 – Vibrating chute 2-frame saw line, L 9.0 m, W 500 mm 07 – Vibrating chute frame saw roller conveyor, L 7.50 m, W 500 mm 08 – Vibrating chute trimming line, L 11.0 m, W 650 mm 09 – Vibrating chute trimming line, L 9.0 m, W 650 mm Nsdpfx Ajznunpjhkjlf 10 – Screw conveyor for sawdust, L 4.0 m, Dia. 300 mm 11 – Conveyor belt to chipper, L 3.60 m, W 500 mm 12 – Slab conveyor belt, L 11.0 m, W 300 mm 13 – Waste conveyor belt, L 11.60 m, W 300 mm 14 – Metal detector 15 – Chipper type RE-TH 250/700/5, Motor 75 kW 16 – Double screw under chipper, W 600 mm 17 – Crooked chain conveyor to screen, W 600 mm 18 – R&E screen, L 4.0 m, W 2.0 m 19 – Crooked chain conveyor to landfill, W 500 mm / W 300 mm 20 – Crooked chain conveyor to wood chip storage, W 600 mm Additional Information Manufacturer: Rudnick & Enners Year of manufacture: 2011 Condition: very good, used and dismantled Availability: immediately ex stock Location: A-3525 Lugendorf, Austria Application: Sawmills, biomass plants, wood processing

Condition: excellent (used), CATALOGUE NUMBER 8013 TECHNICAL DATA Nlodpfx Aszrugashksf - inlet width 450mm - inlet height 210mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - traction shaft, toothed, top and bottom 2 × 2.2kW - additionally, a toothed traction roller at the bottom, in front of the traction shaft - electric auto-reverse (with adjustable settings) - reverse gear - belt conveyor - conveyor length 2260mm - conveyor belt width 430mm - main motor 45kW - overall dimensions of the conveyor (length/width/height) 4900x1700x1700mm - weight approximately 3000kg ADVANTAGES – with belt conveyor – electric auto-reverse – reverse gear – used shredder, very good condition Net price: 76900 PLN Net price: 18310 EUR, depending on an exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet: 870x735mm - rotor working width: 720mm - main motor: 18.5kW - pump motor: approx. 0.75kW - number of knives: 17 pcs - knife size: 80x40mm - screen: 20mm - pressing drawer - electric auto-reverse - outlet for shredded wood: Ø250mm - dimensions (L/W/H): 2000x1350x1370mm - weight: 1586kg ADVANTAGES – pressing drawer – very good condition – used chipper Nlodpfx Ahezru Uqskef Net price: 33,900 PLN Net price: 8,070 EUR based on an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: like new (used), engine power 22kW shaft width 410mm Nlodpfjx Syciex Ahkjf driven feed rollers sieve 30mm and 15mm inlet width 430mm

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,250 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 30, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker waste material shredder, wood shredder, chipper, shredder MHR630 proline The MHR proline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideally suited for craft businesses, recycling companies, and industrial operations seeking an economical yet powerful solution. The machines are manufactured in our factory in Germany and sold directly. Advantages: - Continuous, uniform shredding process Nledpfxezumuzo Ahksf - High performance with low energy consumption - 2 knife rows for increased throughput - Robust construction - Larger feed opening - Excellent value for money - Ready to connect - Siemens PLC controlled - MHR630 proline Rößler waste material shredder – “Made in Germany”

Condition: good (used), Year of construction: 2012, Slow-speed machine with a push-floor system. Rotor width: 830 mm. Large rotor with 38 blades. Blade size: 40 x 40 mm. 22 kW motor. Screen aperture: 25 mm. Nodpfx Ahsy T Ef Eekslf

Condition: excellent (used), CATALOG NUMBER 7899 Technical data: - Chipper intake section: 410mm x 180mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve size: 60x60mm - Upper feed roller, toothed - Lower feed rollers: 2 units, toothed - Infeed belt length: 2180mm - Infeed belt width: 400mm - Autoreverse (adjustable) - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4300x1600x1100mm - Weight: approx. 2000kg ADVANTAGES – Italian manufacture – Non-painted – Electric adjustment of body height Njdpfszu R Urox Ahkslf – Used multi-blade saw, very good condition Net price: 69,900 PLN Net price: 16,640 EUR with the exchange rate of 4.2 (Prices subject to change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8039 TECHNICAL DATA - inlet width 320mm - inlet height 160mm - roller width 320mm - blade length 310mm - number of blades 2 pcs - toothed drive roller, top - toothed drive roller, bottom - vibratory feeder with magnet 1650x310mm - automatic reversing - main motor 22kW - feed motor 2×1.1kW - machine dimensions with vibratory feeder (length/width/height) 2600x1500x1800mm - machine and vibratory feeder weight approximately 1500kg ADVANTAGES – Austrian made – vibratory feeder with magnet 1650mm – automatic reversing Nedpozkvglofx Ahkolf – original DTR documentation – used shredder, very good condition Net price: 34900 PLN Net price: 8310 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,250 kg, fuel type: electric, For sale is a ROBUST REUSER SD 600 industrial shredder in like-new condition. The machine comes from an exhibition and has not been used in production. It has no operating hours and is therefore offered as a new machine from an exhibition. The SD 600 is a compact and powerful shredder for various materials, such as wood, plastic, cardboard, paper, and electrical cables. Thanks to the PLC control, automatic operation, and robust cutting unit, the machine is ideal for craft, recycling, and industrial businesses. Technical data: Model: ROBUST REUSER SD 600 Nlsdpfx Aozl A I Eohksf Condition: New machine / Exhibition machine Operating hours: 0 Motor power: 15 kW Operating voltage: 400 V Frequency: 50 Hz Fuse rating: 40 A gG / 50 A D Weight: approx. 1,250 kg Dimensions L × W × H: 1.88 × 1.12 × 1.67 m Rotor diameter: 222 mm Rotor length: 550 mm Rotor speed: 80–120 rpm Number of cutting blades: 14 Size of the feed opening: 946 × 567 mm Granulate size: approx. 10–30 mm Capacity: up to 2.5 m³ per hour HOLE SIEVE HARDOX 450 (30mm) The actual throughput and granulate size depend on the material used and the size of the sieve openings. Features and advantages PLC control included Suction connection Ø 160 mm included Fully automatic operation Hardened blades with four usable cutting edges Robust sieve made of HARDOX Protected hydraulic system Star-delta motor control Quiet and energy-efficient operation Compact and robust design Easy installation Low maintenance requirements We offer the following warranty on the machine: 12 months or up to 1,000 operating hours, whichever comes first. The machine is available immediately. Inspection and further information are available by prior arrangement. The stated selling price is a net price. The statutory value-added tax will be added and shown separately on the invoice. Sale subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 1995, Heavy-duty rotor hog crusher. Materials that are processed include everything from wood wastes to eucalyptus bark The machine is equipped with 250 kW electrical motor. Nsdpfx Ahex Sdw Rekslf Production, particle size P100 mm , m³, loose vol/h : 135 ( max 170 ) Production, particle size P100 mm , t/h , fresh : 33 ( max 40 ) Infeed opening : 1514 x 695 mm

Condition: like new (used), Year of construction: 2025, Rotor diameter: 260 mm - Feed opening approx. 830 x 1100 mm - Rotor length: 830 mm Nsdpfjyat H Aox Ahkjlf - Motor: 18.5 kW - Hydraulic pusher - Single knife row - Chip screen - Low operating hours

Condition: repair required (used), Disc chipper Bruks IDC000127 - infeed 220 X 280 mm - without electric motor Njdpfxsvzw Tfs Ahkelf

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 11 kW (14.96 HP), overall weight: 1,000 kg, total length: 1,750 mm, total width: 1,100 mm, total height: 1,640 mm, working width: 510 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 12, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 510 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Recycling shredder, Hacker wood shredder, chipper, shredder, MHR510 ecoline The MHR ecoline series consists of robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies looking for an economical and powerful solution. The machines are manufactured in our factory in Germany and sold directly. Advantages - Continuous, uniform shredding process - High performance with low energy consumption - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pole CEE plug, 400V, 32A three-phase current) Nlodozdr D Hspfx Ahkjf - Siemens PLC controlled - MHR510 ecoline Rößler recycling shredder – "Made in Germany"

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 Nledpfjx Tp U Rex Ahkof - 18.5 kW - good condition - available immediately

Condition: ready for operation (used), Year of construction: 2012, Brand: Weima Model: WL4 Year of manufacture: 2012 Motor: 18.5 kW Stock no.: 2002962 Nodjzg Dxhjpfx Ahkolf OPTIONS: Motor-driven screw/angle pipe: 2m

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Recycling shredder, wood shredder, chipper, shredder MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies looking for an economical yet powerful solution. The machines are manufactured and distributed directly from our factory in Germany. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - Includes Ecoring - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pole CEE plug, 400V, 32A three-phase power) - Siemens PLC controlled - MHR630 ecoline_Ecoring Nljdpfozt I Itsx Ahksf Rößler recycling shredder – “Made in Germany”

Condition: as good as new (ex-display), functionality: fully functional, power: 22 kW (29.91 HP), color: yellow, input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 98 rpm, rotor diameter: 300 mm, The LR1000 is particularly distinguished by its high reliability and excellent performance. The most well-known models of the LR series are particularly popular for demanding applications where high throughput is required. Further technical data: Cutting head opening: 1000x1050 mm Hopper volume: approx. 1000 liters Drive power, conveyor screw: 0.55 kW Elastic belt drive Drive power, hydraulics: 1.1 kW Dimensions: 1761 x 1630 x 1704 mm Gearbox Design: 2-stage spur gear gearbox in an oil bath for low maintenance Cutting head Number of cutting tools: 27 Optional equipment Machine housing in a 45° design Extension of the conveyor screw channel by 400 mm with downward discharge for LR1000 with 25 mm perforated screen 4x adjustable machine feet for LR1000 with vibration dampers Light barrier in the lower machine housing 1x control element, external, with start/stop and emergency stop buttons Njdpfx Ahozmh Efokslf 2x emergency stop contacts including relay Industrial horn 230 V AC

Condition: good (used), Year of construction: 1998, High-performance shredder with 1.2 m rotor width Large rotor diameter of 368 mm with 64 blades 37 kW motor Engine and gearbox replaced 6 years ago Nledpfx Ahoxwwvujkef

Condition: new, Year of construction: 2026, Weima Hacker/Shredder WL 8 with Top Equipment - 2nd knife row, log spacer, 4-sided segment base, discharge auger with geared motor, Fast hydraulic reverse with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used, for example, thousands of times in wood processing companies worldwide. The high number of these highly sought-after shredders guarantees a tried-and-tested and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components for this – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the gate timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging thanks to self-cutting hopper design The hopper performs several tasks at once. The material to be shredded is initially fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill in very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is crucial for shredding. Even with bulky parts, the shredder cuts itself free. If required, hopper extensions and lids with gas springs are also available. Long-lasting rotor bearings thanks to offset design Due to the extreme stress during shredding, a rotor bearing must be particularly robust. To prevent dust or foreign objects from entering its interior, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Nlodpspdqzxsfx Ahkjf Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd knife row - Log spacer - 4-sided segment base - Discharge auger with geared motor - Fast hydraulic reverse with shock valve - Mesh size 15/20 mm List price: EUR 52,320, sold at a special price Location: Ex warehouse 54634 Bitburg - immediately available - The pictures show a machine without a discharge auger; it will be in stock soon.

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight approx. 2000kg ADVANTAGES – German-made – with conveyor feeder – auto-reverse Nlodpfozruc Uox Ahkjf – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)