Used Rack Milling Cutter for sale (14,735)

Condition: good (used), The scope of delivery includes: 1x bracket for rear panel grille, used Material color: similar to gray-white Diagonal length: approx. 285 mm Overall width: approx. 100 mm Protrusion: approx. 150 mm Material thickness: approx. 3.00 mm Weight/piece: 0.56 kg 2 elongated holes: 55 x 9 mm (W x H) Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport Fsde Aia Iyopfx Ah Eepp or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Item: LC-4580 - Cheese Salting Racks Stainless steel cheese salting (brine) vats with racks, Stainless steel AISI 316 Each shelf is 760x1350 mm Distance between shelves is 120 mm Each rack has 13 shelves 24 vats with 2 racks each Plus 9 extra racks Total: 24 vats with 57 racks Rack dimensions: L: 1350 mm, W: 760 mm, H: 1600 mm Fsdpfxezvn Hho Ah Espp

Condition: used, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW Fodpfex E Tmbox Ah Espp • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: used, functionality: fully functional, Machine Data • Gantry system with fixed table and moving portal for minimal footprint • Base, bridge, and bridge columns made from steel, welded in one piece, stress-relieved and machined • Main machine assemblies are ribbed welded constructions, optimized for the best stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized via finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading with forklift or overhead crane • Ground precision linear guides with high preload and additional cover bands for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-sided, synchronized drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screws with double pillow block support on the Z-axis • Precision planetary gearboxes with low backlash • Fully enclosed cable drag chains protect cable harnesses from chips and dust • High-quality shielded cable drag chain wiring ensures superior protection against faults and failures • X-axis working area: 1,540 mm • Y-axis working area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 200 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM Control • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with Manual Tool Change • Power consumption: 2.2 kW • 5,000–24,000 rpm, steplessly programmable • Cooling by integrated electric fan Extraction System for Manual Tool Change • Hose connection diameter: 80–90 mm FlexiCAM Midrange Vacuum Table (Side Channel Blower) • T-slot profiles, individual ball valves, 6 zones • Side channel blower: 7.5 / 9 kW • Approx. 558 m³/h (50 Hz) or 654 m³/h (60 Hz) Safety Devices • CE-compliant to DIN EN 13849 • Includes EMC filter, emergency stop Fedjx E Ttbopfx Ah Eepp • Light barrier system controlled by machine controller

Condition: new, Year of construction: 2026, functionality: fully functional, Table saw TF 190 E (400 V) – NEW *Tabletop has minor scratches* Fence with finely adjustable aluminum stops, quick and easy speed change, display of the set speed via LED lights, large work surface with a torsion-resistant cast iron table, selector switch for right/left rotation of the milling spindle, milling unit made of cast iron, workpiece holder for precise workpiece guidance Dust extraction port ø 100 mm Work table 690 x 480 x 900 mm, 400 volts, drive motor 2.2 kW, Fpodeyxqhpepfx Ah Ejp milling spindle useful length 100 mm, spindle arbor ø 30 mm, milling tool ø max. 200 mm, adjustable, milling spindle stroke 100 mm, spindle speeds 1800/3000/6000/9000 min⁻¹, machine size 730 x 520 x 680 mm, weight 155 kg NEW PRICE MSRP: €1,688.00 Transport possible for an additional charge!

Condition: used, Year of construction: 2021, turning diameter 42/200 mm turning length 430 mm control Fanuc 3li-B clamping chuck diameter 165 mm turret (x-stations) 2x12 travel -y axis 70 mm range L-W-H 2645 x 1645 x 1900 mm total power requirement 11/7,5 kW Fpjdpfj Ah T Uljx Ah Eep turning speeds 6000 U/min gripping station 42/200 mm load magazine Breuning IRCO SIMag chip conveyor Knoll kW coolant filtering unit Knoll kW total power requirement 11/7,5 kW weight of the machine ca. 6250 kg CNC Turning & Milling machine Miyano ANX 42 SYY

Condition: used, Year of construction: 2006, travel -x axis 2.000 mm travel -y axis 620 mm travel -z axis 520 mm numbers of positions in the tool changer 56 tool adaptor SK40 5-axis machining center | HEDELIUS - RS60 Magnum KM2000 equipped with shuttle operation, rotating swivel turntable and chip conveyor. Fsdpfx Ahj Ah T U To Espp Please note that the technical details were added from comparable machines. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS60 KM2000 | RS-60 | RS 60

Condition: used, Year of construction: 2011, travel -x axis 850 mm travel -y axis 700 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 turning speeds 10.000 U/min numbers of positions in the tool changer 38 tool taper SK40 5-axis simultaneous machining center | HERMLE - C 40 U equipped with internal coolant supply (80 bar), a 38-tool changer, a swivel axis, and a rotary table (ø 800). Additional equipment: - Swivel axis - rotary table (ø 800) Fpsdpfxo Ah Uabj Ah Eop - Blum Tool breakage control / -measurement The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 40 | C40 | C-40 | C40U

Condition: good (used), Year of construction: 2020, x-travel 1.300 mm y-travel 290 mm z-travel 450 mm table-size 1.600x 320 mm table load 0,5 t spindle turning speed range 80-5.000 U/min spindle turning speeds of horiz. head: 60-1.800 U/min spindle taper vertical SK40 spindle taper: hori. SK50 quill stroke 127 mm feeds x/y/z -stepless 0-1.000 mm/min rapid traverse X-axis 5 m/min total power requirement 10 kW weight of the machine ca. 2,7 t dimensions of the machine ca. LBH 1,9 x 2,1 x 2,5 m Fjde Ahzi Nopfx Ah Eopp -Swiveling milling head with quill feed; -Horizontal spindle with independent drive; -Pneumatic tool clamping system; -3-axis position display; -Electronic handwheels; -Pneumatic tool clamping; -Coolant system; -Work light; -Chip tray; -Manual central lubrication; -Hydraulic machine vise; -Various tool holders; -Various horizontal tool holders; -Collet set in a case; -Outboard support (counter-bearing) for horizontal milling

Condition: used, Pappschere - Board Cutter Wilhelm Leo'S Nachfolger 19030 Serial-No. WLNS Fpjdpfxo Ahzwgs Ah Ejp Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Index Cutter Hunkeler RE 320 Fpedpe Ahzyisfx Ah Esp Registereinschneidemaschine - Index Cutter Hunkeler RE 320 Serial-No. 4852/15 Schnittlänge maximal 320mm / Cutting length max. 320mm Schnitttiefe maximal 80mm / Cutting deep max. 80mm Schnittdicke maximal 10mm / Cutting thickness max. 10mm Buch dicke maximal 50mm / Book thickness max. 50mm Messe Geschwindigkeit 70Hub/minute / Knife speed 70stroke/min. Motor Bremsmotor 1,5PS / Motor - brake motor 1,5 PS Außenmaße: / Machine Dimensions: Länge 950mm / Length 950mm Tiefe 820mm / Deep 820mm Höhe 1370 mm / High 1370mm Gewicht ungefähr 380KGS / Weight approx. 350KGS Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:102 mm Main spindle: Technology:Direct drive spindle Speed:4,000 rpm Power:48 kW Torque:680 Nm Bar capacity:102 mm C-axis:0.001° Chuck:Hainbuch Spanntop 100 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow Clamping Cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:4.000 rpm Power:48 kW Torque:680 Nm C-axis:0.001° Chuck:Hainbuch Spanntop 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Partially Hollow Clamping Cylinder 848 mm Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Fpodpfx Ahj Ah Adbs Ejp Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 barCoolant Coolant Temperature Control Tool monitoring:Easy Tool Monitor Tool Breakage Monitoring:Swivel Wire Touch Probe:Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software Option IV:Gear Cutting and Gear Shaping Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop :

Condition: used, Year of construction: 1990, Control Heidenhain TNC 355 x-travel 1.000 mm y-travel 400 mm z-travel 450 mm surface area 1.300 x 400 mm feed range 1 - 6.000 mm/min number of spindle speeds 60 - 3.600 U/min vertikal number of spindle speeds 30 - 1.800 U/min horizonta spindle taper SK50 +++++ Please note: Fodpfx Ahod N Sngj Ejpp The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kunzmann WF7/3 tool milling machine with Heidenhain TNC 310 CNC control – excellent condition, CE compliant!! Technical data: >> Year of manufacture: 2006, Machine no. 370562 >> Milling table clamping surface: 800 x 425 mm 6 clamping slots Slot width: 14 H7 Slot spacing: 63 mm Maximum load: 300 kg >> Spindle speeds up to 4500 rpm >> Feed rate range up to 2000 mm/min Rapid traverse rate up to 5000 mm/min >> Travel distances X/Y/Z: 600/400/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic clamping system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 5.5 kW Accessories and equipment: Fedpfx As Ahyl Tsh Eepp >> Heidenhain TNC 310 CNC control >> Hydraulic clamping system, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, parts lists, operating manual >> Full-protection enclosure >> Coolant system About the machine: Offered is a Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 310 CNC control. This universal milling machine is in very good condition. It features a very easy-to-use control system. Furthermore, the machine has hydraulic clamping systems for both vertical and horizontal operation. Changing from vertical to horizontal operation is very simple, by folding down the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: new, Cantilever racking to your desired dimensions! Ideal for storing your long goods. Easy access to your products thanks to configurations that can be used on one or both sides. Expandable system that allows you to add elements as your requirements evolve. Perfect for offcuts or long goods in metal and wood businesses. Why BLT cantilever racking? - Certified German manufacturer DIN EN 1090 - Made in Germany- - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load! - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - We use the legally prescribed C4 load plates in accordance with DIN EN 15635 / BGR 234 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the upright profile. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : Fpjdpfx Ahs Aiq Dms Eop If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, functionality: fully functional, spindle diameter: 30 mm, actuation type: electric, SCM T130E Undercut Spindle Moulder Spindle diameter: 30mm Spindle length: 140mm Fpjdpfs Aiqy Rex Ah Ejp Variable spindle speed: 3000/4500/6000/7000/10000 rpm Main motor power: 7.5 kW Electronic height adjustment of the spindle using a switch CE certified Technical documentation included

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Cutter condition: Poor Fpsdj Aithtopfx Ah Eop Technical data: - Blade: WP - Flight circle (ø): 125 mm - Bore: 40 mm - Length: 30 mm - Material: Steel

Condition: excellent (used), CATALOGUE NUMBER 6607 TECHNICAL DATA Circular saw: - max. saw blade diameter 350mm - spindle 30mm - spindle locking - blade adjustable front/back, up/down - blade guard - motor 1.1kW - dust extraction port diameter 80mm Milling machine: Arbor: - spindle diameter 40mm - spindle working height 140mm - spindle locking - max. milling cutter diameter 350mm - 2 speed settings 3000, 4500 rpm - motor 5.5kW - brake - side carriage – manual feed - carriage dimensions length/width 1180x600mm - angle ruler - 2 pneumatic clamps - dust extraction port diameter 120mm - dimensions length/width/height 2600 (for shipping 2000)/1600/1450mm - weight 735kg Fedpfxs Aithzj Ah Ejpp – very good condition – used milling machine Net price: 13900 PLN Net price: 3233 euros, depending on the exchange rate, 4.30 euros (Prices may vary in case of significant fluctuations)

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control. Fpjdpfxs Aiiqzo Ah Esp

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Fpjdjv Td Eljpfx Ah Eep Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: used, DECKEL Spiral milling attachment – scope of supply and condition as shown in the pictures. Fpodpfx Ahj Aiirij Eop

Condition: used, Folienschneider / Foil Cutter BAIER FOLSCH Fpsds Aikdxepfx Ah Esp Baujahr / Year 1966 - Serial-No. 66236 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Letter Press Tiegel - DIE Cutter Heidelberg OHT Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1974 - Serial-No. 186 403 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Fjdpj Aikd Asfx Ah Eopp Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 1986, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t Fodpfxj Ait I Ds Ah Espp

Condition: used, Year of construction: 1990, x-travel 0800 mm y-travel 550 mm z-travel 500 mm table-size 1000 x 630 mm Fodps Aiiqpjfx Ah Espp feed range 0- 10.000 mm/min rapid traverse 10 m/min Tool bore ISO 40 turning speed range 20 - 4000 U/min main drive DC 10 kW CNC control Dialog 11 total power requirement 15 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area and tool change with 30 pos. Machine has been refurbished by FPS in 2010.