Used Punching Shear for sale (2,897)

Condition: used, Punching machine Bograma Description: - Standard equipped Podpfoxlr Nrox Ah Hsgg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 27869, controller model: Cybelec Cybtouch-8W, working width: 3,100 mm, sheet thickness (max.): 6 mm, cutting speed: 20 mm/min, Equipment: CE marking, TECHNICAL DETAILS Max. sheet thickness: 6 mm Max. working width: 3,100 mm Cutting speed: 20 mm/min Backgauge depth: 1,000 mm MACHINE DETAILS Control: CNC Psdpfx Ajydv R Seh Hjgg Controller: Cybelec Cybtouch-8W Drive type: Hydraulic Design: Swing-beam Power: 12.5 kW Dimensions & Weight Dimensions (L x W x H): 3,850 x 2,350 x 1,560 mm Weight: 5,500 kg Transport packages: 2 EQUIPMENT Electric backgauge Motorised angle adjustment Manual cutting gap adjustment Ball bearing table Documentation CE marking CE certificate

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 2107308, controller model: Elgo P40T, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 13 mm, The machine was only in use for 3 years! The original price was €52,000! TECHNICAL DETAILS Working width: 3,100 mm Cutting angle (min.): 0.5° Cutting angle (max.): 3° Stroke rate (min.): 8 strokes/min Stroke rate (max.): 20 strokes/min Pedpfx Ahjydc Nbe Hsgg Sheet thickness (max.): 13 mm Aluminum sheet thickness (max.): 10 mm Steel sheet thickness (max.): 13 mm Stainless steel sheet thickness (max.): 8 mm Back gauge adjustment: CNC controlled Back gauge: 1,000 mm MACHINE DETAILS Control: Elgo P40T Dimensions & Weight Total weight: 12,000 kg Dimensions (L x W x H): 4,000 x 2,200 x 2,100 mm Power: 22 kW Input voltage: 400 V Input current: 45 A Input frequency: 50 Hz Type of input current: Three-phase EQUIPMENT CE marking Finger guard Foot remote control Emergency stop button Safety light curtain

Condition: used, functionality: fully functional, Year of construction: 2004, Used Geka profile steel shear Type: HYD 110 SD Pgodpfxeyfmt Ts Ah Heg Capacity: 100 tons 3-way punching head Punching table is equipped with NC-controlled stop table 2 x 2 meter roller conveyors Year of manufacture: 2004

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used SCHRÖDER motorized guillotine shear, model MHSU 2000/3,0, year of manufacture 2007 Working range: 2,000 x 3.0 mm Blades suitable for cutting stainless steel Pedpfjyfmgtsx Ah Hjgg Extended angle stop 1000 mm on the right Extended pull-out support table Manual rear gauge, can be operated from the rear (500 mm) Rear area safeguarding with light barrier and side protection grid Foot switch Machine is located in our warehouse in 71334 Waiblingen-Beinstein and is immediately available.

Condition: used, The KHS E 1000 is a robust Manual Guillotine Shear that belongs to the Guillotine Shears category, featuring a solid cast-iron construction designed for the professional workshop. This classic manual plate shear is essential for locksmiths and metal fabricators, enabling them to cut large steel plates with ease and precision. The machine boasts a working length of 1,040 mm and can handle plate thicknesses up to 1.5 mm, ensuring it meets the demands of various projects. With adjustable table stops and a manually adjustable back-gauge, operators can achieve accurate cuts seamlessly. Additionally, the counterweights enhance comfort during operation, making the KHS E 1000 a reliable choice for any metalworking environment. Embrace the quality of KNUTH products and invest in the KHS E 1000 for your workshop today; order online to elevate your sheet metal processing capabilities. Pgsdpfx Asyfl U Aoh Hsg

Condition: as good as new (ex-display), The KMT M 1303 Guillotine Shear from KNUTH is engineered for precise and reliable cutting, making it an essential tool in the Sheet Metal Processing category. Featuring a robust solid steel construction, this modern plate shear is equipped with a powerful drive motor that allows for efficient operation. With its straight cutter angle, it minimizes workpiece torsion during cutting while providing a high-precision manually adjustable back gauge for exact positioning. The dual-sided reversible upper cutters and four-edge lower cutters enhance the lifespan and versatility of the machine. Ergonomically designed, the bright LED illumination of the cut line and a clear view from above ensure accurate alignment. A mobile foot switch offers operators the flexibility to manage the workpiece safely, while essential features such as a cut counter and accessible lubrication points promote efficient maintenance. This reliable and powerful Guillotine Shear is perfect for your workshop needs—request a quote today to enhance your Sheet Metal Processing capabilities with the KMT M 1303. Pjdpfxoww Uaae Ah Hjgg

Condition: good (used), Year of construction: 1992, Hydr.hole punching machine make häwa year 1992 Pgjdjgbk R Uspfx Ah Hog working pressure.400bar with electric height adjustable supporting table Machine ready for use .

Year of construction: 2001, condition: good (used), Hydraulic punching machine Fabr.EDEL Type: POWERPROFI 205 Bj.2001 with many accessories In good condition . Pgedpfoqwg Acox Ah Hsg Punching force 200 kN throat 560 mm Tools up to 100 mm Die thickness: 0.5 to approx. 10 mm. Further data see data sheet .

Condition: excellent (used), Year of construction: 2009, operating hours: 16,800 h, functionality: fully functional, cutting force: 600 t, power: 242.71 kW (329.99 HP), Lefort Mobile 600 Tons Shear force: 600 t Hold-down force: 120 t Pusher force: 180 t Lid closing force: 240 t Box height: 600 mm Box width: 800 mm Box depth: 6000 mm Available immediately Pgsdouptrpjpfx Ah Heg

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, overall weight: 720 kg, total length: 320 mm, cutting length (max.): 300 mm, Alligator shears JMC 320 Fully overhauled, as new IMMEDIATELY available from stock IUT Beyeler AG, DE-06188 Landsberg. Financing and rental possible. We are looking for used alligator clippers! 12-month warranty The well established 320 Shear is a must for any yard and is now recognised as the industry standard for all shears of this type. One of our most popular shears, the McIntyre 320 Shear has maintained dominance in a demanding market due to its strength, quality and reliability The 320 is powerful enough to deal with a wide range of cutting and cleaning operations and is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations. The 320 can also be used to cut ferrous metals. Pgsdpfx Aofxvklsh Hog Every shear comes with 1 year guarantee, spare parts can be delivered within 24 hours to whole europe.

Condition: new, Year of construction: 2025, Alligator shear brand new AVAILABLE NOW, ex work IUT Beyeler AG, DE-06188 Landsberg Financing and rental possible. We are looking for used alligator shears! The McIntyre 407 Alligator shear is a non ferrous shear which is both affordable and efficient. It has a 407mm 16″ blade length and enough power and speed to handle a wide variety of cutting tasks. This versatile alligator shear was built originally for scrapyard use so is robust enough to withstand difficult working environments. It is now our most popular shear with thousands in daily use worldwide. The McIntyre 407 non ferrous scrap shear can handle: Automotive scrap Whole gear boxes Cylinder heads and blocks Oversized gate valves And of course all the usual non ferrous metal cutting tasks. Pjdpfx Aohq Nlgsh Hegg It can also handle ferrous metals if needed.

Condition: new, Year of construction: 2025, Alligator shear JMC 500 HD brand new AVAILABLE NOW, ex work IUT Beyeler AG, Pgjdpohq Nk Refx Ah Hjg DE-06188 Landsberg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, cutting force: 700 t, power: 300 kW (407.89 HP), empty load weight: 115,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 91,000 kg, cutting length (max.): 7,100 mm, year of last overhaul: 2024, pressure: 360 bar, Taurus K773.L1E Cutting force 700 tons Cutting width 950 mm ( blade 1000 mm ) Cutting height 650 mm Box 7100 mm rammer 900 kN Central lubrication system Included 300 kW drive power Revision 2024 (year of construction 2006) Revision includes the following work: - Replacing the HARDOX carriage guides - Replacing the carbon guides on the blade carriage - Installation of new knife seats top/bottom - Installation of new blades and screws top/bottom - Welding on the worn parts in the scissor mouth - Dismantling of both covers, fitting new hinges, fitting new shafts, reassembly - Overhaul of all 4 HPR 160D pumps at LINDE Poland - Sealing the valves on the left/right valve bank - Installation of new piston rod feed (180 x 8.29 m) - Installation of new feed guide bushes incl. sealing package Pgodpjuptmysfx Ah Hsg - Overlay welding of feed block and hold-down device, followed by milling to size - Inspection of side cylinders, in some cases installation of new seal packs, if required - Replacing piston rods and honing pipes - General repair work on hydraulic pipes, clamps, in some cases - Replacement of damaged hoses - General repair work on structure, covers and platform construction - Repainting of the system - Steel frame for mounting the machine Ready for immediate use. Available from December 2024 with repainting

Condition: new, Year of construction: 2026, functionality: fully functional, New shear blades, for example for Lindemann LU 1010 Pjdpfox R Ud Ejx Ah Hsgg Dimensions: 200x80x524, split version (see drawing) 8 pieces available / 2 sets Price per piece.

Condition: refurbished (used), Year of construction: 2018, The JMC 400 alligator shears can easily cut solid cast parts of 50x50 mm, flat iron of 230x12mm or 178x25mm. See for yourself how powerful these alligator shears are with a weight of 2000 kg and a maximum shearing force of 120 t. Pgjdevntm Iepfx Ah Hsg

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm shear: length of knifes 275 mm Pgsdpfx Ajydqn Sjh Heg total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Year of manufacture: 1995 Condition: Good, operational condition TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES  Angle stop with ruler Pgedpsydk Acofx Ah Hsg  Double-edged blades  Foot switch  Documentation

Condition: used, Comprehensively tested, used Netzsch Max Shear 3 Inline disperser. Includes a stainless steel inline mixer with 76mm diameter slotted disintegrating head direct driven by 4 kW 3/50 2885rpm motor. Also includes double acting mechanical seal with 2.6 litre seal pot rated 10 bar at 60 deg.c. Mounted on stainless steel frame. Psdoyc Tp Ajpfx Ah Hogg

Condition: used, Year of construction: 2001, - Year of manufacture: 2001 Specifications - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Strokes per minute: 10 - Oil tank: 410 l - Motor power: 37 kW - Operating voltage: 400 V Pgedjxa Aclopfx Ah Hjg - Rated current: 72 A - Main fuse rated current: 100 A - Dimensions (W x H x D): 3750 x 2400 x 3425 mm - Weight: 13800 kg

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm Podpfov Syyvox Ah Hsgg max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), functionality: fully functional, Year of construction: 1993, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, cutting length (max.): 3,050 mm, motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Podev Tk Efspfx Ah Hsgg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Pgedpfx Ahohtq N No Hsg Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück Pgodjycxgmepfx Ah Hjg cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: used, Year of construction: 1986, Cutting bench, cutting shear Type: Hydraulic Manufacturer: Darley Type: GS 3100x13 Year: 1986 Control: Conventional Cutting width: 3100mm Cutting thickness: 13mm Psdpfx Aownh Ncsh Hegg Electric Backgauge Motor-power: 22kW Incl. frontloader-arm Total dimensions: 3750x1900x2150mm Machine-weight: 10000kg - Year: 1986 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum