Used Pump Set for sale (16,146)

Condition: good (used), Busch Vacuum Pump Model 630 Rjdpfx Ahewa Nzqezebt 370 CFM

Condition: used, Nordson Problue 7 Hot Melt Pump Rjdpfx Ajwq S Eyjhzjbt Model Problue 7

Condition: new, New - Lowara DOC Pump Suitable for clean and dirty water applications such as Cellar or Basement drainage or small sumps. With channel impeller and can be supplied with or without float switch. These pumps have thermal overload protection in case of dry-running and overheating. Rbodpfx Ahsrupn Djzet The DOC7 range has a 1 1/4" BSP Female discharge. General Specification of DOC Range: Delivery - 14m3/h flow rate 11m maximum head 3 Phase or 1 Phase 50/60 Hz Power 0.25 kW to 0.55kW 5m maximum immersion depth Temperature of pumped liquid - 0°C to 40°C DOC3 DOC7 up to 10 mm max suspended solids DOC7VX up to 20mm suspended solids Insulation class B IP68 rated 10m cable length supplied with Pump

Condition: good (used), Busch Vacuum Pump Model 400 Rbsdpfxjwa Ra Uo Ahzjt

Condition: good (used), Busch Vacuum Pump Type: 400-212 235 CFM Rsdpfx Aswa Ucgjhzjbt Dimensions: 1300 mm x 800 mm x 1100 mm.

Condition: used, Nordson Problue Hot Melt Pump Model - Problue 10 Redpjwq Suujfx Ahzjbt Facility to connect up to 6 hoses 10kg Tank Capacity

Condition: good (used), Busch Vacuum Pump Model 400-212 Rbjdpfx Ahswa Unpjzjt

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Rbodswq Sv Eepfx Ahzjt Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: TRGD 08/5-2.5-550-FcV, input voltage: 230 V, Beinlich Radial Piston Pump in mobile setup Manufacturer: Beinlich pump systems Manufactured: 2008 Viscosity: 100-1000 mPa.s Max pressure: 200 bar. Medium used for: Glycol, Linseed oil, Acrylates With Lenze series 8200 vector frequency inverter (adjustable speed) Redpfxoxiwg Rj Ahzebt Complete with original manuals and diagrams

Condition: good (used), Promoted by APEXPUMPS Bristol UK -type: HPV32.2-7-30-CDAAKR -serial number: 110150-02 -inclusion dimensions: 1650x400x500mm -operating pressure: 27 bar -max. pressure: 40 bar -mass flow: 360L/min Rbedpfxot A U H Io Ahzet -lifting height: 270m -electrical data: 400V; 30kW

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 50.5 kW (68.66 HP), type of cooling: air, overall weight: 604 kg, total width: 780 mm, total length: 2,360 mm, total height: 1,680 mm, warranty duration: 6 months, heating capacity: 50.3 kW (68.39 HP), Aircooled chiller/Heat pump DAIKIN EWYQ050CAWP H 50.5 kW / 50.3 kW Cooling capacity: 50.5 kW / 14.36 tons (12/7 — 35°C) Heating capacity: 50.3 kW / 14.3 tons (40/45 —7°C) Rodpfxow Hzyxo Ahzobt Year of manufacture: 2018 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Daikin JT1GCVDKYRBA (scroll, inverter) + 2 pcs. Daikin JT170G-KYEBA (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump GRUNDFOS CM10-2-X-R-A-E-AQQEF-A-A-N, expansion vessel. Dimensions: 2.36x0.78x1.68 m Weight: 604 kg Working hours: 32957/32957/32957/32957 h. Condition: Good

Condition: new, functionality: fully functional, Year of construction: 2024, This powerful, hydraulic pile rammer from Maruzen is a good choice if you are looking for a strong machine for striking steel and wooden piles. The Maruzen KH193 comes standard without impact piece. Easy and fast to use As many as 1920 blows per minute Operates on hydraulic power source such as a power pack or earth mover Can be used in wet conditions, even underwater Minimal service required; lubricate head every 50 hours and service every 500 hours. Hydraulic powerhouse The KH193 pile rammer is a perfect choice when ramming steel pipes, for example 60 x 40 mm or ø 60 mm, but it is also suitable for wooden piles up to a diameter of 110 mm. It weighs 20 kg and is more powerful than our gasoline rammers. This type of pole rammer offers many possibilities: Maruzen's hydraulic powerpack is intended for mobile purposes and is known for its easy way to use. This powerpack UH070 is matched with the AY01H horizontal auger, the OH01 hydraulic one-man auger and the KH193 pile rammer from Maruzen. This type of powerpack offers many possibilities in: Assembly Fencing Foundation work Guardrail/boarding work Installing solar parks This hydraulic power pack is powered by a Honda GX200 gasoline engine and is delivered fully assembled, on a metal frame with large wheels. Benefits: Rbodortqydepfx Ahzet Low fuel consumption; 1.6 Liters per hour at full power 20-25 Liters per minute Low noise level Light weight (40 Kg) Honda GX200 4 stroke engine (low emission) Very easy to use. EuroGate International offers affordable quality and service Maruzen is a reliable machine builder from Japan, for all kinds of hydraulic tools. The top brand offers excellent quality and service. Maruzen has been producing hydraulic machines since 1954.

Condition: not inspected (used), Year of construction: 2017, functionality: unexamined, input voltage: 72 V, type of cooling: water, No minimum price – guaranteed sale to the highest bidder! Set includes the following components: 2x inverter welding machines HighPULSE 552 RS 2x water cooling units WK-350 Special wire feeder DV-31 Twin + additional accessories (hose packages, torches) MACHINE DETAILS Electrical data (welding unit) Current range: 20 A – 550 A Voltage range: 15 V – 41.5 V Mains voltage: 72 V Rbodoyaqbkepfx Ahzet Mains current: 35 A

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, overall weight: 130 kg, total length: 1,200 mm, total width: 780 mm, total height: 1,280 mm, Equipment: foot remote control, TECHNICAL DETAILS Rsdpeyf A S Eofx Ahzobt Grommet size: 4 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 780 x 1,280 mm Net weight: 130 kg EQUIPMENT on castors with foot switch Note: The machine is sold without a riveting head.

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, overall weight: 80 kg, total length: 600 mm, total width: 500 mm, total height: 950 mm, operating pressure: 500 bar, TECHNICAL DETAILS Nominal flow rate: 9.2 - 1.6 l/min Max. pressure: 500 bar MACHINE DETAILS Rbsdpfx Ajyf Akzjhzot Dimensions & Weight Dimensions (LxWxH): 600 mm x 500 mm x 950 mm Weight: approx. 80 kg EQUIPMENT Unit is mobile (on wheels)

Condition: good (used), Centrifugal pump, acid pump, alkali pump, water pump for groundwater lowering pump Rbsdpfxoyf Augj Ahzst -Centrigeminal pump: with stainless steel tank -Motor: 2.2 kW -Flow rate: 1900 l/min -Pumping height: 15 m -Tank capacity: 500 liters -Overall dimensions: 1080/920/H1190 mm -Weight: 126 kg

Year of construction: 2011, operating hours: 8 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S071361/01, USED GODWIN 12 INCH PUMP MODEL : CD300M SERIAL : S071361/01 Redpfxjxiwawo Ahzebt ENGING MODEL : CATERPILALR C9 ENGINE SERIAL NO : JSC22260 YEAR : 2011 HOUR : 7.8hrs

Year of construction: 2025, condition: like new (used), functionality: fully functional, For Sale: 4 pieces of new spiral planing heads D 140 x 240 x 40 Z=6 Used only once as a demo, now available at a special price! Rjdpsydk Tbofx Ahzebt Act fast and secure these high-quality spiral cutterehads heads that will revolutionize your woodworking projects. Don’t miss out on this opportunity, 60% of new price

Condition: excellent (used), For sale: Gaussmeter MAGSYS HGM09s from the renowned manufacturer MAGNET SYSTEME (MAGSYS) – a professional magnetic field meter designed for industrial, service, and laboratory applications. This device is used for precise measurement of magnetic induction (mT / mG) and is widely used in quality control, maintenance, diagnostics of magnetic separators, magnetic grippers, permanent magnets, as well as laboratory applications. — Rjdpsydfvkofx Ahzjbt Technical condition • Fully functional equipment, powers on correctly • Clear display, responds to magnetic field • Normal signs of use • No information on current calibration (user calibration may be required if necessary) — Included in the set • MAGSYS HGM09s gaussmeter • 2 MAGSYS magnetic probes • Complete cabling • USB memory stick • Original transport case • Exactly what you see in the photos — Main features • DC magnetic field measurement • Units: mT / mG • Functions: AUTO, HOLD, ZERO (NULL), manual/automatic ranges • Data logging and retrieval capabilities • Robust, industrial-grade construction • Suitable for B2B / laboratory applications — Applications • Maintenance • Industry and manufacturing • Quality control • Magnetic separators and systems • Laboratories and technical services

Condition: new, Sale, Lowara vertical pump/New Parameters : - Capacity max: - 39000L/h - 15000L/h. Redjviyuuopfx Ahzobt - Lifting height max: -93-38m - Motor power: 11 kW - Rotational speed: 2900 rpm

Condition: excellent (used), I sell the pump FEZER 016-118 94213 Redpfx Ahsud Ryrjzsbt - Pump in bdb condition. - Capacity 16m3/H

Condition: excellent (used), I am offering a complete industrial process pump with ATEX (EX) explosion-proof design, mounted on a robust steel skid frame. The unit is ready for immediate use in industrial installations, including hazardous (explosive) zones. Pump manufacturer: Victor Pumpen GmbH (Germany) Model: R40 KM6TM +2A / 88RF38+693De/6-K Electric motor: CEMP (Italy) • Power: 1.5 kW • Three-phase 230/400 V • 1,400 rpm • Protection class IP55 • Explosion-proof execution Ex d IIB T4 Gb • ATEX / IEC 60034 certification Gearbox: Siemens – EX version • ATEX Certificate II 2D c T120°C • IP55 • Gear oil: CLP VG 220 • Output speed up to approx. 72 rpm Rodsx Ndbwepfx Ahzebt Features and equipment: • Complete unit on mounting skid • Coupling guard • Connection flanges • Pressure gauge • Heavy-duty industrial construction • Excellent visual condition Applications: The pump is designed for transferring oils, fuels, resins, adhesives, solvents, and other process media. It is ideal for use in the chemical and petrochemical industries, paint shops, EX installations, and applications requiring continuous operation and stable pressure.

Condition: used, This orbital welding system, model: ST-95 Tesch, will be auctioned online in our industrial auction / machinery auction (follow-up auction) due to the building relocation of Siemens Erlangen – including laboratory equipment, electrically height-adjustable desks, office chairs, and technology. Redpfoydbk Dox Ahzobt

Condition: excellent (used), Professional industrial screwdriver by Atlas Copco, designed for continuous operation in assembly lines and production applications. True industrial-grade equipment – not a consumer retail product. Specifications and info: • Model: ETP STB34-06-106 • Power supply: 18V DC • Country of manufacture: Sweden • Year of manufacture: 2021 • Ergonomic, well-balanced design • Suitable for precision assembly and serial production Set includes: Rbsdpfx Ahjyc Rvaszet • Atlas Copco cordless screwdriver • 2x 18V Atlas Copco batteries • Atlas Copco charger • Everything visible in the photos is included Condition: Used, fully functional, with typical signs of use. No cracks, no play in the mechanism. The tool comes from industrial disassembly. Applications: • Manufacturing • Industrial assembly • Production lines • Professional workshops An ideal alternative to buying new equipment – significantly lower cost while maintaining Atlas Copco quality.

Condition: like new (used), Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: WLD-MODEL-SIZE, type of input current: AC, total height: 3,000 mm, total width: 3,000 mm, total length: 2,000 mm, input voltage: 240 V, overall weight: 8,000 kg, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, warranty duration: 12 months, type of cooling: water, continuous power: 22 kW (29.91 HP), Weld overlay cladding is an advanced welding process which provides an anti-corrosion or wear resistant surface on a less corrosion or wear-resistant base metals. A prime example involves the deposition of a stainless steel or nickel-based alloy layer onto a carbon steel base material, thus not only giving it corrosion resistance but also lower cost compared to the use of a monolithic stainless steel or nickel alloy components (stainless steel or nickel-based alloy). With our advanced equipment and software, EQ Automation is able to deliver our customers a total weld overlay cladding solution that will give our customers better productivity and lifespan of their equipment. Rjdpfxoyaw Ece Ahzsbt Welding Machine Sets: Robotic Welding, Quality Welding Consumables, Wires, Rods available!! Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters up to 3.0meters, vertical & horizontal Pre-Set Programmable, easy operation control panel. Friendly interface. Overlay welding for Balls, Valves, Flange faces, RTJ groove, Bevel etc. One touch, More Welding Solutions, Stocks for sale!!