Used Protective Gas Welding Machine for sale (75,159)

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested Rated voltage 400V Rated power 60 kVA at 50% duty cycle Short-circuit current 22 kA Welding current 17.6 kA Lrsdsh N Sd Uopfx Ap Den Fuse rating 125A Outreach 420 mm Electrode force 470 daN Cylinder with pre-stroke Total stroke 80 mm Double stroke 60 mm Electrode cone MK2 – electrode holder new New 2-stage foot switch according to UVV (accident prevention regulations) All pneumatic and water hoses replaced Weight approx. 330 kg - TE 180 with digital display of welding current, current rise, etc. - Main switch on the control cabinet - Original documentation/operating manual available - Machine inspection with confirmation 02/2026 Demonstration and inspection by appointment Commissioning and training at the customer’s site possible for an additional charge System is located in Dresden, near the A17 motorway And we always have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: like new (used), Year of construction: 2020, Power at 50%: 25kVA Short circuit-current: 18kA Electrode force: 240daN Throat depth: 230-550mm --- Weld control: TE101 (13-parameters, 99-program) --- Extra Equipment: - foot pedal - main switch Lrjdpfszgxfisx Ap Dsn --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Lsdozd Rmgepfx Ap Dsrn Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, functionality: unexamined, machine/vehicle number: Ultraweld-40, input voltage: 220 V, Used Amtech Ultraweld 40 ultrasonic metal welder with parts and controllers Ledpfsx A A Exjx Ap Dern Manufacturer: Amtech Model: Ultraweld-40 (R4A actuator) Includes manual

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m Lredpfx Apjykvdls Don - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1,500 kW (2,039.43 HP), total height: 1,055 mm, overall weight: 235 kg, Equipment: CE marking, documentation/manual, Cleaning, welding, cutting, weld cleaning, and energy storage welding — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 2 mirrors, 8 seam types and multiple types of weld clean. You can give our managers a call for additional details! Wattsan 5in1 G2 Pro characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Lredpfx Aporztrme Dsn Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1,500 kW (2,039.43 HP), Equipment: CE marking, documentation/manual, Cleaning, welding, cutting, and weld cleaning — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 2 mirrors, 8 seam types. You can give our managers a call for additional details! Wattsan 4in1 G2 characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. Lrodpfjrztdrsx Ap Djn YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, functionality: fully functional, Year of construction: 2026, power: 1,500 kW (2,039.43 HP), overall weight: 235 kg, Equipment: CE marking, documentation/manual, Cleaning, welding, cutting, and weld cleaning — the handheld laser welding machine can improve the efficiency of your production. It’s able to weld carbon, stainless steel, aluminum and titanium alloys, plastics, and various dissimilar materials. This laser welder is easy to operate and features a user-friendly interface. Wattsan Laser Welding includes a 10-meter cable, which allows you to operate freely. The gun weighs only 1 kg and includes an auto-wire feed. This model has 1 mirror and 1 seam type. You can give our managers a call for additional details! Lodpfxoiichho Ap Djrn Wattsan Welding machine characteristics: Cooling: water Laser power: 1500-3000 W Machine size: 1075x664x1055 mm Laser source: JPT / Raycus Weight: 235 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: refurbished (used), Year of construction: 2009, operating hours: 200 h, functionality: fully functional, machine/vehicle number: P.TE 1-350, total width: 700 mm, total length: 900 mm, total height: 600 mm, warranty duration: 12 months, length of welding knife: 500 mm, width of welding knife: 10 mm, High frequency welding machine THF producer, reviewed by Cebb HF Technology in 2026 35cm of arm 1,5KW of power Lrsdpfx Asy Nkibep Djn Welding electrode 500x10mm or 250x20mm Possibility of welding with small additional shaped electrodes Dimensions 700x900xH600 to be placed on top of a table original plexiglass shielding 12 months warranty

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Ledpozfwh Tofx Ap Dsrn Model : CB 18 . Series : B20 .

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, Laser welding machine with 200 watts of laser power - lamp-pumped - spot welding machine for the finest welding tasks - for jewelry, optics, precision engineering, etc. - weld spot from 0.1 to 3 mm - for virtually all metals (steel, stainless steel, silver, gold, titanium, etc.) - incl. optical microscope (10x) - additionally CCD microscope with crosshair - current, pulse width, repetition rate, and frequency adjustable on the control panel - incl. protective gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200 watts of power - external cooling - power connection 230 volts / 32 amps Ledpfxeflrnij Ap Dern Please also note our favorable leasing/rent-to-own offers. Machine dimensions approx.: Width: 60 cm Height: 120 cm Depth: 110 cm Weight: approx. 150 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, Stürtz horizontal 4-head welding machine for welding plastic components. Welding dimensions: 2600 x 3000 mm Weld bead height limit: 2.0 mm (adjustable to 0.2 mm) Suitable for welding entrance doors. Penetration depth: 6.0 mm Lrjdpfx Ajzfky Nop Don Operation via PC Jetter (Dell PC conversion kit)

Condition: good (used), Year of construction: 2001, Offer 26161 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA - Adjustable reach: 140 - 500 mm - Welding parameters: - Steel sheet: 6 + 6 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 1.2 + 1.2 mm - Adjustable electrode force: 17 - 278 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Power supply: 400 V - Space requirement: approx. W 670 x H 1250 x D 1600 mm - Weight: approx. 240 kg - Including: - Welding control system DALEX MPS 200 Lrodpezfim Isfx Ap Djn - Foot-operated switch

Condition: good (used), Year of construction: 2001, machine/vehicle number: ZAC-N-14354, Offer 26162 Technical data: - Rated power at 50% duty cycle 80 kVA - Max. welding power 211 kVA - Outreach 350 mm - Welding parameters: - Steel sheet 8 + 8 mm - Brass sheet 4 + 4 mm - Aluminum sheet 4 + 4 mm - Electrode force, adjustable 120 - 720 daN - Required air pressure 6 - 10 bar - Cooling water flow rate 12 l/min - Control system DALEX MPS 8043-1 for: - Pre-heating time; current time; - Post-heating + open-arc time, as well as - Rise time + pulse + pause time Lrsdpfxozfigzo Ap Don - Power supply 400 V - Space requirement approx. W 950 x H 2100 x D 1500 mm - Weight approx. 600 kg - Including: - Complete electrical and pneumatic system - Foot-operated switch

Condition: good (used), Year of construction: 2015, 1 used shielding gas welding machine Daihen /OTC M 380-S Year of manufacture 2015 Current range 30-380A Welding power at 100% duty cycle 270A Welding wire 0.8-1.6 mm Wire feed 0.1-22 m/min With 4-roller wire feeder with encoder control Ledpfxjxnqnxj Ap Djrn

Condition: good (used), 1 MIG/MAG welding machine Manufacturer: Merkle Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Design: portable assembly unit Lrsdpjxpf N Tsfx Ap Don Wire feed mechanism: 4-roll drive DV 26 Fuse protection: 16 amps Dimensions: 600 x 300 x 565 mm

Condition: used, Year of construction: 2011, 1 used welding machine Manufacturer: Merkle Type: MobiARC 280 cel Year of manufacture: 2011 Lrjdpsh Nvfnefx Ap Dsn Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding: Mains voltage: 400 V, Mains frequency: 50/60 Hz, Power consumption: 8.3/5.5 | 9.7/8.3 kW, Current consumption: 12/8 | 14/12 A, Maximum current: 21/16 A, cos φ: 0.98, SMAW welding: Electrode diameter: 1.5-6.0 mm Open circuit voltage: 96 / 90 V Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A GTAW welding: Open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, Welding current: 5-280 A, current at 60 %: 250 / 270 A, Insulation class: H, Protection class: IP23, Operating modes: SMAW, GTAW (DC), Cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17.5 kg

Condition: good (used), *DESCRIPTION* Professional ARO AROMASTER II welding set, year 1997. Medium-frequency spot welding unit, 1000Hz, delivered complete with its 2 original tools. ARO Château-du-Loir brand = a global reference in resistance welding. Robust equipment, spare parts always available. *LOT COMPOSITION* 1. *AROMASTER II Generator* Code ZU182000 - No. 9713221A523 - Year 1997 400V Three-phase 50Hz - 20.7 kVA at 100% / 29.3 kVA max Integrated water cooling - NF A 82-020 standard 2. *ARO YB200450 X-Gun* No. 9712211B669 - Year 1997 Water-cooled - 450mm copper arms - Force ∼300 daN 3. *ARO YB200550 Dent Puller Gun* No. 9712211B640 - Year 1997 For welding pull studs Ø2.5mm *TECHNICAL SPECIFICATIONS* Brand: ARO - Made in France Technology: Medium frequency 1000 Hz Power supply: 400V Three-phase 32A minimum Welding current: ~10,000 A Lrodezczw Ispfx Ap Don Weldable thicknesses: Steel 0.6 to 2.0 + 2.0 mm Control: Digital - Time/intensity adjustment Cooling: Water - Integrated unit Generator weight: Approximately 110 kg - On castors *CONDITION & WARRANTY* Set in good overall working condition. Tested in the Gortina workshop: cycles with gun and puller OK, pneumatic pressure OK, no water leaks, thyristors OK. Original ARO yellow paint. Cables and wiring in good condition. *ADVANTAGES* 1. *2-in-1 Set*: Spot welding + inertia dent pulling. One generator only. 2. *ARO Reliability*: Industrial construction. National after-sales service. 3. *Economy*: Equivalent new cost 2026 > €15,000 (excluding VAT). 4. *Ready for use*: Generator + gun + puller, original 1997. *APPLICATIONS* Traditional automotive bodywork, vehicles before 2010, vans, 4x4s, restoration of old vehicles. Dent pulling without paint. Training centers.

Condition: good (used), Year of construction: 2000, *TECHNICAL SPECIFICATIONS* Make / Model ARO MC30CSC Year 2000 Serial No. 0001122B122 Type Fixed spot welding machine with swan neck Power Supply 400V Three-phase 50Hz - 50A Power 21 kVA at 100% / 78 kVA max Max. Welding Current 19,000 A Clamping Force 358 daN 358 kg Swan Neck Depth 550 mm Arm Spacing 174 to 489 mm Cooling Water 5 L/min - 6 bar Control ARO Micro 2X16 III digital Multi-parameter programs Weight 270 kg Standards CE - NF A 82-020 - Made in France *SUPPLIED EQUIPMENT* - Complete machine on chassis - 1 pair of mounted, water-cooled copper arms - Micro 2X16 III digital control with key - ARO operating manual *CONDITION* Machine in excellent working condition. Tested and inspected in the workshop: welding cycles OK, pressure build-up OK, no water leaks, thyristors OK. Original yellow ARO paint. Ready for production. *ADVANTAGES* 1. *Power*: 78 kVA for welding steel up to 3+3 mm and stainless steel 2+2 mm. 2. *ARO Reliability*: Leading brand, spare parts always available. 3. *Modern Control*: Micro 2X16 for precise adjustment of time/intensity/force. Ljdpfxozczwho Ap Djrn 4. *Versatile*: 550mm swan neck for large parts. *APPLICATIONS* Manufacturing of grids, baskets, metal frames, assembly of industrial sheet metal, locksmithing, industrial bodywork.

Year of construction: 2020, condition: ready for operation (used), A handheld fiber laser welding machine Sitolaser with a Reycus laser source is available. Laser power: 1000W, cooling: water, welding capacity steel/copper/aluminum: 4mm/2mm/2mm, min. sheet thickness: 0.2mm, wavelength: 1080nm. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1200mm, weight: approx. 250kg. Including various copper nozzles, spare lenses and heavy-duty casters for mobility. The item is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Lrsdjzfaarepfx Ap Dsn

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: 8100404, Our showroom demonstration model is for sale. It comes without electrode holder and ground clamp. New cables are available upon request for an additional charge. Welding Power Easy-Stick 410 SET Adjustment range: 30 – 400 A Duty cycle at maximum current at 40°C: 60% Duty cycle at 100% duty cycle at 40°C: 310 A Lsdpsv T Tx Ijfx Ap Djrn Fuse protection: 32 A Line voltage: 3 x 400 V Line voltage tolerance: -10 – +15% Line frequency: 50/60 Hz Open circuit voltage: 66 V Power consumption: 13 kVA Standard: EN 60974-10 Protection class: IP 21 Insulation class: H Marking: CE, S Operating temperature: -10 – +40 °C Weight: 24 kg Length x width x height: 618 x 330 x 441 mm

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Cooling water flow rate: 4 l/min Electrode force: 17 to 390 daN Open circuit voltage: 2 to 3.2 V Stages: 4 Throat depth: 235 mm Dimensions: L 750 x W 350 x H 1100 mm Lrsdpfx Apox Ic T As Dsn Weight: 77.5 kg All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 390701, For sale: a two-head welding machine, URBAN model AKS 3900. Lrodpozd Ra Tofx Ap Don The machine is in perfect working order. It was used in a single-shift production environment. Year of manufacture: 2021. Purchase invoice date: 2022.

Condition: used, Year of construction: 2000, functionality: fully functional, Compact resistance butt welding machine from IDEAL-Werk (C.+E. Jungeblodt GmbH, Lippstadt, Germany) for joining band saw blades quickly and reliably. The BAS 050-11 is the entry-level workhorse of the BAS series — ideal for workshops, saw doctors, and sawmills that weld narrower carbon and bi-metal blades and need a dependable, low-footprint machine. Built to the usual IDEAL standard: solid German engineering, simple operation, and the kind of longevity that keeps these machines in daily service decades after they leave the factory. Technical Specifications Type: BAS 050-11 Year of manufacture: 2000 Rated output at 50% ED: 4.5 kVA Connected load: 4.5 kVA Open-circuit (welding) voltage: 2.6 / 4.4 V Max. upsetting force: 2.2 kN Primary voltage: 415 V Frequency: 50–60 Hz Fuse protection: 16 A CE marked — Made in Germany Resistance butt welding for clean, strong blade joints Two-stage welding voltage (2.6 / 4.4 V) for flexibility across blade types Compact and robust — built for continuous shop use Steel strip: 6-50 mm Bandsaw for wood: 6-50 mm Metal bandsaw, bimetallic and tungsten alloys: 6-32 mm Hoop knife: 6-30 mm Lrjdpfxezcqn Ns Ap Djn Stainless steel bandsaw: 6-30 mm

Condition: used, SURFACING AND JIG BORING MACHINE DUAP ZS 80/1400 • Maximum piece length: 1500 mm • Minimum piece length: 70 mm • Maximum piece diameter: 80 mm • Minimum piece diameter: 10 mm Lrodjzcprmspfx Ap Dsn