Used Printing for sale (5,792)

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Lasdpfsxz Ewnex Affjk

Condition: good (used), Year of construction: 1995, functionality: fully functional, • Features: - 5 wet offset printing towers - Web width: 520 mm - Print width: 510 mm - Mechanical speed: 350 m/min • Equipment: - Paper unwind station - Web edge control - Web tension control - Turn bar unit - Alcohol dampening system - Sheeter (cross cutter) - Non-stop high pile delivery - Plate and film punching system - Plate bending table - Edge extraction system • Accessories: - Technical documentation - Operating manual - Toolbox with tools Ledpfexzzz Aox Affoak

Condition: used, Year of construction: 1995, Colors: 8 Gearless: No Fast Sleeve Change: No 4 motor CNC per printing deck: Yes Computer Supervision: Yes Web Width: 1320 mm Print Width: 1300 mm Min. Print Repeat: 380 mm Max. Print Repeat: 1100 mm Mechanical Speed: 350 m/min Working Speed: Up to 300 m/min Unwinding & Winding: Turret, FLYING SPLICE, Max. Reel Diameter 1000 mm Drying: 2 Zones, 4 Fans, 2 Gas Burners Video Camera: Yes Lodpfxexzrx Ej Affjak Corona Treatment: No Web Guides: FIFE Viscosity Control: Yes Wash System: Yes, F&K Ceramic Anilox Rollers + Closed Chamber Doctor Blade 1x 80 L/cm, 2x 200 L/cm, 2x 120 L/cm, 4x 200 L/cm, 2x 320 L/cm, 3x 400 L/cm 200 sleeves, repeat between 390 mm and 1090 mm (8 for each repeat: 390, 400, 410, 420, 430, 450, 480, 510, 530, 540, 550, 630, 660, 670, 740, 780, 800, 850, 880, 930, 990, 1030, 1050, 1090 mm + 8 twinlock 740 mm + 8 twinlock 1030 mm) Mandrels for sleeves: 6x360 mm, 6x400 mm, 6x420 mm, 8x460 mm, 8x530 mm, 6x560 mm, 12x620 mm, 8x780 mm, 8x850 mm, 15x990 mm Printing cylinders: 8x380 mm, 8x390 mm, 12x400 mm, 8x410 mm, 8x450 mm, 6x460 mm, 7x470 mm, 4x490 mm, 12x500 mm, 8x510 mm, 12x530 mm, 8x540 twinlock, 6x560 mm, 8x570 mm, 8x580 mm, 8x590 mm, 12x620 mm, 9x640 mm, 12x660 mm, 6x670 mm, 6x730 mm Overall Dimensions: Length = 17 m, Width = 5 m, Height = 6 m Central Drum Diameter: 2280 mm

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, I bought the machine used myself and had a comprehensive full service carried out. Two full, unopened ink cartridges are also included. I recently had the magenta light and cyan light print heads deactivated, but they can be reactivated at any time. When I bought it, only one white print head was active. The printer works perfectly. For the photo, I removed the nozzle cover, which, of course, is included ;) The roll printing attachment is also included. I simply don't need it often enough. Lsdpfxew R Tx Tj Affoak Transport must be organized by the buyer.

Condition: used, Year of construction: 1999, functionality: fully functional, Heidelberg Speedmaster SM52-5 5 Colour or 1+4 perfector CPC 1-04 Alcolor dampenng Autoplate Technotrans refrigeration and recirculation Weko powder spray Max sheet size: 37 x 52cm Length: 5.5m Width: 1.85m Height: 1.62m Age: 1999 Laodjw Sltrepfx Affek Price: Euro 39,500 FOB

Condition: repair required (used), Year of construction: 2017, operating hours: 15,939 h, functionality: limited functionality, machine/vehicle number: R678B751, number of ink cartridges: 8, color channels: CMYK, number of print heads: 2, I am offering for sale a flatbed plotter Mimaki JFX200-2513. Ledpfoxzpvzjx Affeak Working area: 1300x2500 mm 2 print heads Currently, the machine is loaded with 2xCMYK; conversion to CMYK+W+C is possible. Low usage: 4916 m2 The machine has mechanically damaged print heads. Printing is possible, but banding starts to appear relatively quickly.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, • Model: SIAT L33 150 TC • Machine in very good condition, completely overhauled in 2022. • Machine type: Semi-automatic, three-color flexographic printing press • Color printing: Up to 3 colors • Web width: 150 mm • Printing width: 150 mm Ledpfsxznwkjx Affeak • Suitable for: PVC, OPP, Acrylic OPP, cellophane, paper, and reinforced films • Applications: Primarily for printing on self-adhesive tapes • Central impression drum: Heated, with ceramic drums • Rewind: Automatic rewind turrets with automatic coupling of printed tape to empty cores • Corona treatment: Yes • Slitting: By razor blades • Drying: 3 hot air drying tunnels • Speed control: Up to 160 m/min, adjustable via inverter • Maximum roll diameter (unwind): 360 mm • Maximum roll diameter (rewind): 300 mm • Unwinder shaft diameter: 3 inches

Condition: ready for operation (used), Year of construction: 1999, SM 52-4H 1999 year CPC 1-04 Millions circa 140mios ALCOLOR dampening MG Electric refrigirator Autoplate Ink roller wash-up device Blanket wash-up device Laedpfxow Ivqao Affek Grafix Alphatronic 200 powder spray HEIDELBERG IR dryer High pile delivery Free of damages Grippers changed 2021, feeder renewed 2021.

Condition: used, Year of construction: 2014, TECHNICAL DATA: Lodexzrvdspfx Affjak Type: 5-color digital UV inkjet press with separate white printing unit Length: 4550 mm Width: 1750 mm Height: 2200 mm Weight: 3000 kg Connected load: 39 kW / 60 A Power supply: 400 V, 3-phase, 50 Hz Auxiliary power: 230 V, 50 Hz (chiller) Compressed air consumption: 100 NL/min Required cooling capacity: 18 kW (60,000 BTU/h) Data interfaces: USB 2.0, Ethernet COOLING UNIT (RECOLD RE-C 160 INERT) Cooling capacity: 16,000 W Refrigerant type: R134a Refrigerant charge: 4.5 kg Power consumption: 8.5 kW Max. current: 15 A PRINTING TECHNOLOGY: Process: Piezo DOD Printheads: Xaar 1001 Resolution: 720 × 360 dpi UV DRYING SYSTEM: UV lamps: • 1× Hönle UV GOZ, 7.2 kW • 1× Hönle UV FOZ, 7.2 kW Pinning: LED pinning after print units 1 and 5 Exhaust: Integrated lamp cooling and odor reduction INERT GAS CURING SYSTEM: Type: Oxygen-reduced curing unit Gas consumption: < 6 m³/h WEB AND PRINT PARAMETERS: Process: Roll-to-roll Web width: 350 mm Print width: 330 mm Repeat length: 10–1000 mm Register accuracy: ± 50 µm Print tolerance: • Single distance: ± 0.2 mm • Cumulative per meter: ± 1.5 mm Speed: • 4-color mode: up to 48 m/min • With white ink: up to 30 m/min • Adjustable speed range: 18–48 m/min WEB TREATMENT AND HANDLING: Corona station: 1500 VA Web cleaning: Polymer roller LC 350 Antistatic units: 3 pieces Edge guiding: Before print module Roll diameter (unwind/rewind): max. 610 mm Roll weight (unwind/rewind): max. 120 kg Shafts: Pneumatic expanding shafts, 76 mm core Splice table: Integrated slitting and splicing table SUPPORTED SUBSTRATES: • Coated and uncoated paper • PP, PE, PVC, POPP (white or transparent) • Aluminum foil (coated or uncoated) • PET films • Acrylic coatings • CN-based primers • PET-based primers • Hybrid dispersion primers INK SYSTEM: Ink type: UV-curable, low migration Food & pharma compliance: Indirect contact Free monomers: < 10 ppb Ink laydown: 8.2 g/m² at 100% area coverage Cartridge change: Possible during operation Empty cartridge signal: Optical or acoustic PRINTHEAD MAINTENANCE: Ink recirculation system: Enclosed design Automatic daily cleaning: Suction cleaning before operation Manual cleaning: Lint-free cloth SOFTWARE: • RIP software: Esko Artwork • ICC profile management • Supported data formats: PDF-X1, PDF-X3, EPS, AI • Internal storage for designs • Unlimited substrate recipe storage • Touchscreen operator panel CONTROL AND SAFETY: • UV lamp overheat and operational monitoring • Machine interlock in event of UV system failure • Ink level warning system • Emergency stop

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 744165, paper height (max.): 840 mm, KBA Rapida 75-4 offset press, format 510x735 mm, max. paper height 840 mm, 4 colors, 60 million impressions, year 2014, in very good condition, regularly serviced and maintained. Lsdpfx Ajxzhp Tsffoak

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 02_01_08, Eurotech Way Automatic Glass Edge Coating Machine Professional automatic machine for glazing and lacquering the edges of glass sheets. Suitable for glass panes with thickness of 4–19 mm and allows precise application of enamel/glaze on edges of 10–200 mm width. Equipped with dosing and application roller system, automatic parameter setting, roller conveyor system, and recipe memory for settings. Perfect for batch production in the glass industry—ensures uniform, aesthetic, and repeatable edge finishing. The machine fully automates the process and significantly increases productivity. Low usage – only 25,206 cycles performed in total. Dimensions: 5864 x 2695 mm Power supply: 400V - 50 Hz Required power: 4 kW Weight: 4000 kg Interface in 3 languages: English, Italian, Polish Operational machine, possible to test before collection. Ljdpfsxzfu Tex Affoak Ready for pick-up. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: Feeders: KR497BW Conveyor: KR314-6 KR840RF Infeed Roller KR519F50 Vacuum Firejet, overall weight: 600 kg, type of input current: AC, input voltage: 230 V, input current: 230 A, total width: 820 mm, total length: 3,430 mm, total height: 845 mm, input frequency: 5,060 Hz, This envelope printer is for sale from the factory its in excellent working condition, ready to work, if necessary we can arrange try out on a scheduled meeting in Hungary, or we can do an online show off. Lasdpfx Asxzfq Usffok

Year of construction: 2001, condition: excellent (used), Production speed: 600 cups/min Colours: 8 Min cup diameter: 60mm Max cup diameter: 130mm Min. cup height: 30mm Max- Cup height: 160mm Counter: 25’731’666 cups produced Equipment / Additional information: Consists of: • Stacker Lasdpfx Ajxww Nujffsk • Printing machine • Cup feeding • Stapler

Condition: ready for operation (used), Year of construction: 1989, Var Kompact dampening new rollers very good condition Ledjxzg Stepfx Affsak serial 609 - year 1989

Condition: used, Year of construction: 2006, Configuration: • Unwinder • Teknek web cleaner • Corona treatment • 6 flexo print stations • 6 × IST UV dryers • Cold foil module • Cold foil unwind/rewind • Lamination module • Laminate unwinder Ljdpsxzq T Uofx Affoak • Die-cutting section with 3 stations • EL camera system • Rewinder Tooling included: • Print cylinders + magnetic cylinder + varnish roller: o Sizes: Z87, Z96, Z110, Z132, Z140 o 5 print cylinders of each size o 1 varnish cylinder for print station 6 • 16 anilox rollers Additional information: • End of 2024: full revision of the printing units and related tools completed.

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Laedpexy R Ezjfx Affsk

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. Lajdovu Syyjpfx Affsk TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: good (used), Year of construction: 2004, functionality: fully functional, + Version VARN KOMPAC film dampening unit Laser slit ink knife Powder sprayer approx. 94 million impressions Ledpfsxy N Dcox Affjak

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, number of ink cartridges: 5, color channels: 5, number of print heads: 5, resolution (max.): 1,200 dpi, total length: 305 mm, total width: 114 mm, total height: 114 mm, space requirement length: 23,100 mm, space requirement width: 6,400 mm, space requirement height: 16,800 mm, year of last overhaul: 2024, type of input current: three-phase, input voltage: 230 V, Equipment: auto duplex, brochure finisher, raster image processor, The Helix® Digital Cylindrical Printer is designed to print high quality full colour images (CMYKWW + varnish) on straight and conical cylinders. Fast and flexible, this cylinder printing machine is ideal for use in the beverage, barware, candle and industrial printing industries. The Helix® UV Cylindrical Printer achieves the perfect balance between speed and image quality with patented Helix® software that places 7 picolitre ink drops precisely along the cylinder at extremely high speeds. This rugged, state-of-the-art machine is designed and built in the USA. The Helix® has a wide frame, allowing easy access and maintenance of the machine. It also has a backlit interior for even greater ease of service. The machine has been additionally equipped with an additional 80mm UV lamp, which has increased the print height to 190mm. We have successfully printed on metal thermoses, glass and plastic bottles. CMYKWVV ink configuration. Lasdpfx Afjvnciljfok The condition of the machine is very good, both visually and technically. The machine is still in constant use. It is possible to see and present the machine.

Condition: good (used), Year of construction: 2017, Year of manufacture: 2017 Condition: good Schulze PRETREATmaker IV A unique device for applying a priming liquid before printing textiles. Due to the size of the area on which it is able to apply the liquid (40x60 cm), it is particularly suitable for DTG M2, M3, M4 printers, but of course also for printers with smaller print area, such as R-Jet, Brother GT3, Anajet, TexJet... The advantage is that it does not need a compressor. The machine is equipped with 4 independent and adjustable nozzles (you can apply only a small area e.g. when printing logos on hearts). Spraying time for full 40x60 area - 4,5 seconds. Selectable liquid spray size in 2 cm increments (2 - 60 cm length). Large clear LCD display. 5 storable positions/settings for area and spray quantity. High efficiency and productivity. No compressor required Laodpfx Afoufi Uwjfsk Machine has 4 independently adjustable nozzles (you can only apply a small area e.g. when printing logos on hearts) Spraying time for a full 40x60 area - 4.5seconds Selectable liquid spray size in 2cm increments (2 - 60cm length) Large clear LCD display 5 storable positions/settings for area and spray quantity High efficiency and productivity PRETREATmaker IV is a high-end device designed for the professional application of penetrating fluid on textiles. It has an advanced electronic system that allows high performance and easier control during the textile pretreatment process. The clear color touch screen allows you to easily adjust the length and width of the spray and easily set the spray volume. The machine is equipped with four nozzles, each of which can be switched on individually. This allows you to precisely set the area for the application of the priming solution (Dupont Artistri, Image Armor, Brother...), but also saves a lot of priming, compared to applying by hand, using a pressure/air gun. The length of the spray area can be controlled in 2 cm sections, using the touch screen. For setting the amount of penetrating fluid application, 10 values are available. The Pre-treat maker IV also has an automated spray nozzle cleaning process (consumption of approx. 12 ml per hour), which keeps the nozzles clear and prevents drying or blockages. Spray area: 40 x 60 cm Spraying method: nozzles move over the table (inside) Table length: 80 cm Nozzles: 4 pieces Dimensions: T 90 x W 72 x H 48 cm Dimensions (for transport): T 95 x W 80 x H 61 cm Weight: 68 kg Weight (for transport): 86 kg Connection: 220/230 or 110/120 VAC (automatic switch) Power consumption: 150 W Operating pressure (before coating): max. 7 bar Menu: 5 languages: German, English, French, Italian, Polish Measurement: "cm" or "inch" Included: spare nozzle, spare filter and ultrasonic cleaner Other features: galvanized and powder-coated housing

Condition: used, functionality: fully functional, With this offer, you are purchasing a used plotter/large format printer ‘Epson Stylus Pro 9890’. Item for sale: Lajdoxwmvqopfx Affok 1 x Epson Stylus Pro 9890 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: good (used), Year of construction: 1989, functionality: fully functional, + Version Varn Kompac dampening system Lsdpfjxy Nz Isx Affsak slotted ink blades

Condition: used, functionality: fully functional, With this offer, you are purchasing a used large format printer/plotter ‘Roland TrueVIS SG2-300’. Item for sale: 1 x Roland TrueVIS SG2-300 with the following features: Includes cutting function Condition: Lasdpfsxwmtijx Affok This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: good (used), Year of construction: 1986, functionality: fully functional, + Version Varn Kompac dampening system Laser slot ink knife Ledpfx Asxy Nzbjffsak

Condition: used, functionality: fully functional, With this offer, you are purchasing a used plotter/large format printer ‘Roland TrueVis SG2-540’. Item for sale: 1 x Roland TrueVis SG2-540 with the following equipment: Includes 2 new print heads before delivery Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). Laedoxwmiwjpfx Affok The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.