Used Power Circuit Breaker for sale (38,186)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 08649020, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 100 mm Gtjdoyn Eb Uopfx Ahvow Weight: 10 kg External reference: Lot 18 / L.Schaible

Condition: used, Year of construction: 2021, functionality: unexamined, Metal Band Saw Automatic Daiß + Partner HBA 320 SG Power-Line, HBA 320 SG Power-Line, Year of complete overhaul: 2021, mitre saw in 2-column design, drive power: 240/400 Volt, 2.2 kW frequency motor, cutting speed: 15 - 105 m/min, reinforced gearbox for high cutting performance, hydraulic system flow rate l/min, electrics: 240/400 Volt, 50 Hz three-phase power, control voltage: 24 Volt DC, automatic feed length: 8,400 mm (in combination with PS 210: 600 mm), multiple feed standard: 2-fold, maximum workpiece support weight: 2000 kg, maximum transport force: 1000 kg, transport frame repeat accuracy: approx. 0.02 - 0.04 mm, mitre cut angle accuracy: approx. 0.05 mm at 100 mm diameter for St 37 material, saw blade dimensions: 4400 x 34 x 1.1 mm, blade tension: constant tension via spring set, weight: 2330 kg. Dimensions (L x W x H), Features: - 1 control cabinet opposite - 1 CNC control PS 95 - 2600 x 2200 x 1950 mm - 2-axis control for feed and mitre adjustment - 1 frequency drive 2.2 kW - 1 Daiß+Partner Power-Box - 1 motor-driven chip brush - 1 stepless drive via frequency converter motor - 1 micro-cooler instead of coolant unit - 1 hydraulic blade tensioning - 1 saw blade breakage monitoring Gedpfx Ahoyr Ifwsvetw - Inspection under power possible

Condition: used, Year of construction: 2016, operating hours: 55,000 h, functionality: fully functional, power: 1,200 kW (1,631.54 HP), temperature: 110 °C, nominal heat output: 1,200 kW (1,631.54 HP), Equipment: documentation/manual, hot water, type plate available, Used, fully functional heating system for sale. Operation has ceased, the system will be dismantled. More details by email or phone. Gedpeyr Aiksfx Ahvetw

Condition: excellent (used), For sale: two power generators: -VM V12130I 12 cylinders, twin-turbo Power: 250kVA; 200kW The generator is equipped with a modern control panel for emergency generators Alessandri A2000 (control box manufactured in 2015). This allows the generator to operate in automatic mode – in the event of a power outage, the generator starts automatically within about 1 second, and when the grid power returns, the generator shuts down automatically. It can also operate in manual mode like a standard generator, allowing the user to start and stop the unit manually. In addition, the panel monitors several generator parameters such as oil pressure, oil temperature, fuel level, and other operating parameters. -VM V6130 6 cylinders Power: 100kVA Gedovq Ighjpfx Ahvstw Option to purchase individual units. Tag: generator, power generator, electricity generator, portable generator, diesel generator, gas generator, backup power, emergency power, standby generator, inverter generator

Condition: good (used), Serial No. A5E03915601 FS:07 Input: 30AC 400-480V 47-63Hz 10.1A Output: 30AC 0-Input V, 0-550Hz. 7.7A Gtjdpfjyrqf Hsx Ahvow Engine 3kW / 4hp Width: 70 mm Height: 195 mm Depth: 163 mm Weight: 1392 g Condition: Good, second-hand

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Gtedpfx Ahex Ndu Djvjw Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: excellent (used), Year of construction: 2009, power oil transformer 12,5MVA 110 / 23kV, manufacturer ETD Plzeň Czech, on load tap changer, conservator, functional, in operation since 2009, very good off-load and on load losses, price negotiable. Gtodohufn Nepfx Ahvew

Condition: used, Year of construction: 2001, x-travel 8000 mm y-travel 1000 mm z-travel 1250 mm dividing head CNC control Fagor type 8025 CNC clamping plate 1500x3000 mm clamping plate 1500x4000 mm clamping plate 1500x4000 mm 4-axis controlled sub-machine Handwheel The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Gtsdpfx Aheyqt Izsvew Your Markus Hirsch Team

Condition: reconditioned (used), Year of construction: 2018, operating hours: 3,317 h, overall weight: 19,000 kg, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size on agreement) Rear discharge conveyor with magnet roll Hydr. self propelled drive (for moving on site) Twin drive separate drives for scraper floor and infeed roller Radio remote control Gsdpfx Aet Egddjhvotw

Condition: good (used), various hydraulic power packs available, more pictures to follow Gtodpod Tx Ddsfx Ahvew

Condition: good (used), EA Elektro-Automatik EA-EL 9080-170 B Laboratory Power Supply EA-EL9080-170B | EA-EL 9080 Condition: Used 6.3A 2400W PD 7.00 Financing through our bank is also available. komplett-konzept.leasingo.de Gtjdpfx Asyplqlehvow Find more laboratory power supplies – new and used – in our shop! International shipping costs on request!

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm Gtsdpoxn U Rqefx Ahvjw TONNAGE: 60 ton THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load Gedpfsgu Nmhjx Ahvstw - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 For further data, please refer to the pictures. Very good condition – almost like new, see photos Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Gtodpfxoynwx So Ahvjw Shipping by freight forwarder possible, please inquire with ZIP code

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Panel, Sub-Distribution Board, Control Cabinet, Distribution Box, Floor Distribution Cabinet Dimensions: 200x60x22.5 cm including distribution base Cabinet height without base: 190 cm + 10 cm base = total height Industrial quality, housing made from sheet steel, color RAL 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distributors were in use until recently and had annual inspections. A wiring diagram is included. A total of 10 units available. Year of manufacture: 2003 For further data, please refer to the images. Very good condition – almost like new, see pictures. Gtodsynwxxjpfx Ahvow Collection only by appointment in 75053 Gondelsheim. Forklift available for loading Shipping by freight carrier possible, please inquire with your postal code.

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Gtjdpsyl Avwefx Ahvsw

Condition: used, MIG MAG welding machine, shielding gas welder CLOOS type GLC 357 N MIG MAG welding power source Serial no. 576 Year of manufacture approx. 1985 Rated output 350 Amp. Output 350 Amp. - 80% duty cycle 310 Amp. - 100% duty cycle Continuously adjustable output range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function - External wire feeder type CK 72 ZK with 2-roller drive and 4.5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirements (L x W x H): 1250 x 600 x 1100 mm Gedpfehubg Tsx Ahvjtw Weight: 260 kg Machine tested – fully functional

Condition: used, Heavy Duty Powered Roller Conveyor KASTO with Steel Support Rollers Straight roller conveyor section with highly robust steel support rollers Roller conveyor length: 2000 mm Usable width (roller width): 500 mm Conveyor height: 880 - 930 mm Number of rollers: 7 pieces Roller spacing: 4x 295 mm, 2x 390 mm (center-to-center) Roller diameter: Ø 100 mm Transport speed level 1: 3 meters/min Transport speed level 2: 13 meters/min Motor power: 0.17 / 0.7 kW Gtsdpju Uwygofx Ahvjw Electrical connection: 400 Volt, 50 Hz - Reversible operation (right and left) - 2 transport speeds via drive motor with 2 speeds - All rollers driven, chain drive - Drive via FLENDER HIMMEL geared motor - Geared motor with brake - 1 adjustable-height support foot via slotted holes - Very robust and heavy design with ball-bearing steel rollers - Metal base frame, frame length 2230 mm Required space (L x W x H): 2650 x 870 x 900 mm Net weight: 580 kg Good condition

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Gjdpjhlnznefx Ahvjtw Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: used, Hydraulic power unit with hydraulic pump RACINE / VICKERS Hydraulic power unit Gtsdpfx Ahsgprpnevew Operating pressure: max. 44 bar Volume flow: 13 litres/min. Tank capacity: 40 litres Engine speed: 950 rpm Engine power: 0,75 kW Mains connection: 380 Volt, 50 Hz - 1 piece hydraulic vane pump PVQ-PSS=-06CR-J11 - Hydraulic tank with maintenance cover and oil level sight glass - 2 hydraulic hoses with 12L connections, length = 950 mm Space requirement L x W x H:: 700 x 400 x 750 mm Own weight: 97 kg (without oil content)

Condition: used, Hydraulic power unit with hydraulic pump BOSCH REXROTH / HYDRONORMA Hydraulic power unit year of construction approx. 1985 operating pressure: max. 65 bar volume flow: 20 litres/min. tank capacity: 110 litres Engine power: 3 kW Engine speed: 1440 rpm. Gtedpfx Ahsgprpgjvjw Mains connection: 400 Volt, 50 Hz - 1 piece hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1 - 1 piece drive motor KATT, type FFN 100L - 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM - 1 piece return filter - 1 piece 4/2-way manual valve (e.g. for extending and retracting a double-acting hydraulic cylinder) - Hydraulic tank with maintenance cover and oil level sight glass Space requirement L x W x H 900 x 550 x 1150 own weight: 142 kg good condition

Condition: used, High current EMC filter SCHAFFNER type FS 20364-1200-99 3 phases, 3 x AC ballast, mains connection module, mains filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz. Rated current: 3 x 1200 A Dimension W x H x D: 135 x 260 x 235 mm weight: 27,5 Kg very good condition, from stock liquidation, unused 2 pieces available, price per piece Gtjdpfx Aod D Dh Aohvew

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. Gsdped N E Rvofx Ahvstw The torch package for TIG welding is not included and its function has not been tested. The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Gtodpodz Srajfx Ahvjw Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Godjdz Srbopfx Ahvstw Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece