Used Positioner for sale (1,976)

Condition: used, machine/vehicle number: H2X387V04014, Year of construction: 2019, operating hours: 12,756 h, load capacity: 2,500 kg, lifting height: 6,430 mm, fuel type: electric, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 6,430 mm Load capacity: 2,500 kg MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: Lithium-ion Battery voltage: 90 V Battery capacity: 268 Ah Battery year of manufacture: 09/2019 Kodpfx Aoz Npguehbsdu Measured battery voltage in idle state: 95.5 V Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,150 x 2,824 mm Dead weight: 5,256 kg Service valid until: 09/2027 UVV (Occupational Safety and Health) valid until: 09/2027 Operating hours: 12,756 h EQUIPMENT Former Linde full-service unit 3rd & 4th valve Full cabin Radio Heater Windshield wiper Tilt angle display Non-marking white tires LED work light, front LED work light, rear Road traffic lighting with turn signals Orange warning light Safety Light, front Safety Light, rear Rear view camera Fork positioner Side shifter All dimensions are approximate values. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of non-compliance with the collection deadline, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 87

Condition: used, Year of construction: 2006, Overview Kedpfx Ajz Hckmshbodu This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,631 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 125 mm, fuel type: electric, mast type: duplex, fork carriage width: 1,070 mm, fork length: 1,400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 3,700 mm Free lift: 125 mm Fork length: 1,400 mm Fork carriage width: 1,070 mm Fork width: 161 mm Fork thickness: 57 mm Fork adjustment range: 560–2,080 mm MACHINE DETAILS Mast type: Duplex Power: 20 kW Front tires Tire type: Non-marking Tire size: 23 × 10–12 Tire condition: 40–60 % Rear tires Tire type: Non-marking Tire size: 18 × 7–8 Tire condition: 20–40 % Battery voltage: 80 V Battery capacity: 625 Ah Battery manufacturer: Exide Battery type: PzS Battery year of manufacture: 2021 Battery condition: 40–60 % Unladen weight: 5,593 kg Overall length: 2,479 mm Overall width: 1,195 mm Overall height: 2,585 mm Operating hours: 3,631 h EQUIPMENT Load protection grid Push fork Side shifter Fork positioner 3rd valve 4th valve Rear work light Front work light Heater Solenoid valve Full cabin Air conditioning CE certificate Non-marking tires LED lighting Seat Noise-reduced hydraulic pump Panoramic mirror Rear dirt guard Load weight indicator Automatic parking brake Dual pedal Air-suspended comfort seat with fabric cover Spring-mounted cabin Reading light Ksdpfez Hvl Dox Ahbsdu Horizontally and vertically adjustable armrest Side battery changer with access pallet including side battery cover I_Site fleet management including PIN code and shock sensor Smart Access Additional cable inside the mast on the left side for the 5th hydraulic function Radio

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,403 h, load capacity: 2,000 kg, lifting height: 5,500 mm, free lift: 1,780 mm, fuel type: electric, mast type: triplex, construction height: 2,422 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 3,846 kg, total length: 2,098 mm, drive type: Elektro, construction width: 1,120 mm, Electric 3-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: Non-marking Front tire size: 200/50-10 Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire size: 140/55-9 Rear tire condition: 20 - 40% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2018 Kdodpfxjz Hgbpo Ahbou Battery condition: 60 - 80% Description: Inspection and safety check recently performed Side shifter, fork positioner, 3rd valve, 4th valve, front work light, roof protection, windshield, half-cab, heater, compliant with STVZO (German Road Traffic Licensing Regulations), full cab, full free lift, interior mirror, LED, 2-pedal operation, joystick (Duo-Pilot), comfort seat, panoramic rearview mirror, multi-color display, optional button panel, floor spot light front + rear, electric steering, electric brake, driver's door missing, battery can be regenerated upon request (for an additional charge).

Condition: used, machine/vehicle number: 517388V00095, Year of construction: 2019, operating hours: 6,982 h, load capacity: 3,500 kg, lifting height: 4,500 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! Kdsdpfx Aez Nwbtshbsu TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,500 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive: LPG Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,200 x 2,250 mm Weight: 5,017 kg Next service due in: 901 hours UVV certificate valid until: 07/2027 Operating hours: 6,982 hours EQUIPMENT Former Still full-service unit Fork positioner with side shifter Semi-cab with windshield wiper LED work light (front) LED work light (rear) Orange warning light Comfort seat LPG gas cylinder with quick-change system Hydraulics: 3rd and 4th auxiliary valve All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 148

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 61 h, load capacity: 4,000 kg, lifting height: 6,350 mm, free lift: 1,890 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,920 mm, motor manufacturer: ELECTRIC, gearing type: hydrostat, battery manufacturer: GNB, battery capacity: 625 Ah, remaining battery capacity: 95 %, battery voltage: 62 V, battery weight: 1,200 kg, fork carriage width: 3,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 405 X 220 X 305, rear tire type: cushion tires (black), rear tire size: 27 X 10 - 12, overall weight: 10,650 kg, empty load weight: 6,650 kg, total height: 2,450 mm, total length: 2,350 mm, total width: 2,620 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, # 🚜 COMBILIFT C4000ET | ELECTRIC | TRIPLEX 6350 MM | 3350 MM WIDE FORK POSITIONER | FREE LIFT | FULL CAB | READY TO WORK ## ✅ FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a forklift that generates value from day one, rather than creating unexpected maintenance costs, this machine is the perfect choice. We are offering a fully inspected and work-ready Combilift C4000ET multidirectional sideloader. The truck has undergone a comprehensive technical inspection, complete servicing, and extensive operational testing. It is ready for immediate use in manufacturing facilities, warehouses, steel service centres, timber yards, and logistics operations. --- # ⭐ Key Features ✅ Fully serviced before sale 🛡️ Warranty included 🆕 Brand new super elastic tyres 🔧 Excellent mechanical and cosmetic condition 🚀 Ready for immediate operation with no additional investment required 🎥 Live online video demonstration available 🚛 Worldwide delivery directly to your facility --- # 📋 Technical Specifications Manufacturer: Combilift Model: C4000ET Year of Manufacture: 2021 Load Capacity: 4000 kg Power: Electric Operating Hours: 61 h Mast Type: Triplex Lift Height: 6350 mm Wide Fork Positioner: 3350 mm Fork Length: 1200 mm Free Lift: Yes Kjdpfez Ni Urjx Ahbedu Cab: Fully enclosed and heated Truck Weight: 6650 kg ### 📐 Dimensions • Height: 2450 mm • Length: 2350 mm • Width: 2620 mm • Overall Mast Height: 2920 mm ### 🛞 Tyres Front: 405 × 220 × 305 Rear: 27 × 10 - 12 Condition: ✅ 100% Brand New --- # ⚙️ Equipment ✔️ 3350 mm Wide Fork Positioner ✔️ Fully Enclosed Heated Cab ✔️ Free Lift ✔️ Working Lights --- # 🏭 Ideal Applications 🌲 Timber and Wood Processing Industry 🏗️ Steel Mills and Steel Service Centres 🔩 Structural Steel Fabrication 📦 Handling Pipes, Profiles and Long Loads 🏢 Indoor and Outdoor Material Handling --- # 🤝 Why Choose FT LOGISTICS When you purchase from FT LOGISTICS, you are buying from a company specialising exclusively in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. Every machine undergoes a complete technical inspection, professional servicing, and performance testing before delivery. We maintain an inventory of more than 100 machines available for immediate delivery and supply customers throughout Europe, South America, Africa, Asia, and the Middle East. --- # ✔️ We Provide 🔧 Full Pre-Delivery Service 🛡️ Warranty 👨‍🔧 Professional Technical Support 💳 Leasing and Financing Solutions 🚛 Worldwide Transport Arrangements 📄 Export Documentation and Customs Clearance 🤝 Comprehensive After-Sales Support --- # 🌍 Trusted Worldwide Hundreds of customers across Europe and international markets trust our machines and continue to return for future purchases. We can arrange: 🎥 Live Online Machine Demonstration 📷 Additional High-Resolution Photographs 🎬 Detailed Walk-Around Videos 🚛 Personalized Worldwide Transport Quotations --- # 🏢 FT LOGISTICS ## 🚜 Ready-to-Work Forklifts Delivered Worldwide 🌍 Quality. Reliability. Experience.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 6,779 h, load capacity: 3,500 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,800 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 800 mm, fork width: 160 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 355/45-15, overall weight: 9,300 kg, empty load weight: 5,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: green, Equipment: CE marking, air conditioning, all wheel drive, cabin, fork extension, lighting, pallet forks, retractable fork, 🚜 Looking for a reliable forklift? We are industry specialists! 💼 We offer high-quality forklifts, providing thoroughly tested machines in excellent condition. ✅ Browse our range and find the ideal machine for your business! 🔹 This listing features: COMBILIFT C3500 – DUPLEX 4100 mm – Year 2016 – 6779 HOURS – LPG – EXTENDABLE FORKS 800 / 1100 mm – CABIN – HEATING & AIR CONDITIONING – CONDITION 5/5 🛠️ This forklift is in outstanding condition and ready for immediate use! 🔧 Technical Specifications: Model: COMBILIFT C3500 Year: 12/2016 Capacity: 3500 kg Hours: 6779 hrs Mast: Duplex Lift height: 4100 mm Power source: LPG Load center: 600 mm Machine weight: 5800 kg Tyres: Solid superelastic, excellent condition Front: 200/50-10 – 100% tread Rear: 355/45-15 – 100% tread 📏 Dimensions: Height (mast lowered): 2800 mm Height (cabin): 2550 mm Length: 2100 mm Width: 2300 mm Fork length: 800 / 1100 mm Fork positioner width: 1320 mm ⚙️ Equipment: 💡 Work lights 🔄 Extendable forks 🛡️ Enclosed cabin 🔥 Heating ❄️ Air conditioning 🏭 Ideal for: Industries handling long loads in narrow aisles, such as timber, steel, or pipe sectors. Thanks to its multi-directional drive, it is easy to maneuver and optimizes warehouse space utilization. 🚀 Additional Features: Multi-directional steering Ergonomic operator’s cabin Designed for heavy-duty usage Suitable for indoor and outdoor applications ✅ Fully functional, serviced, and ready for work. 🌍 Delivery available across Europe + FREE commissioning inspection! 💰 Price & Financing: Kdodpfx Ahez Ni Aiebsu ✔️ Comprehensive financing solutions ✔️ Leasing available for start-ups and established businesses ✔️ Financing decision within 2 hours ✔️ Invoices issued in EUR or PLN ✔️ Authorized supplier for leading leasing companies FAST / EASY / AFFORDABLE FINANCING 💸

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,245 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10½, rear tire type: cushion tires (black), rear tire size: 23 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, # 🚜 COMBILIFT CB3000 | LPG | 4900 MM | FORK POSITIONER | SIDE SHIFT | FULL CABIN | READY FOR WORK ✅ ## 🔧 FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of incurring maintenance costs, this machine is the perfect solution. We offer a modern and fully prepared COMBILIFT CB3000 multidirectional forklift, professionally serviced, thoroughly inspected, and ready for immediate operation in warehouses, production facilities, timber yards, steel service centers, and logistics environments. --- ## ⭐ Key Benefits ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition Kdedpfxez Ni Dts Ahbju ✅ Low operating hours – only 2,245 h ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility available --- # 📋 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 🚜 Model: CB3000 📅 Year of Manufacture: 2023 🔢 Serial Number: 73868 ⚖️ Capacity: 2,500 kg 📏 Load Center: 600 mm ⛽ Engine: Kubota LPG Gas ⚙️ Engine Power: 42 kW 🕒 Operating Hours: 2,245 h ⬆️ Lift Height: 4,900 mm 🏋️ Machine Weight: 6,300 kg --- # 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Construction Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,550 mm 📏 Fork Positioner Width: 1,400 mm --- # 🔩 FORKS 📌 Fork Length: 1,200 mm 📌 Fork Section: 120 x 50 mm --- # 🛞 TIRES Front: 16 x 7 x 10½ Rear: 23 x 10 x 16 --- # 🛠️ EQUIPMENT ✅ Full enclosed cabin ✅ Heating system ✅ Radio ✅ Hydraulic fork positioner ✅ Side shift ✅ Working lights ✅ Kubota LPG engine ✅ Multidirectional steering system ✅ Operator comfort package --- # 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🪑 Furniture manufacturers 🏗️ Steel mills and steel service centers 🔩 Aluminium and PVC profile handling 📦 Handling of long loads ↔️ Narrow aisle operations 🏢 Indoor and outdoor applications --- # 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are working with a company specialized exclusively in: ✅ Sideloaders ✅ Multidirectional forklifts ✅ Long-load handling equipment ✅ Specialist material handling solutions Every machine undergoes a comprehensive technical inspection, full service, and operational testing before delivery. 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. --- # 🚀 WE PROVIDE 🔧 Full service before delivery 🛡️ Warranty 👨‍🔧 Professional technical support 💰 Leasing and financing assistance 🚛 Transport organization 📄 Export documentation and customs support 🔩 After-sales service --- Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📹 We can arrange a live online demonstration. 📸 Additional photos and videos available upon request. 🚛 Customized transport quotation available for any destination worldwide. --- # FT LOGISTICS ### 🚜 We Deliver Machines Ready for Work.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 5,614 h, load capacity: 4,000 kg, lifting height: 4,600 mm, free lift: 2,200 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,000 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 10,150 kg, empty load weight: 6,150 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 🕓 Years of experience | 🧰 Own service & paint shop | 🚛 In-house transport | 🤝 After-sales support Looking for a forklift you can rely on? We are a trusted dealer of new and used forklifts, serving clients all over Europe — from small businesses to large industrial plants. Our forklifts are more than just machines — they ensure smooth, safe, and efficient logistics. 🌟 Why choose us? ✅ Full technical inspection (service, filters, oils, key components) ✅ Optional UDT safety certification ✅ In-house paint & repair workshop ✅ EU-wide delivery by our trained drivers ✅ Operator training & test on delivery ✅ Full post-sale service & spare parts ✅ Financing available – invoice in EUR or PLN ✅ Hundreds of satisfied European clients Kjdpfsz Ni Ekjx Ahbjdu 🚜 OFFER: COMBILIFT C4000 – Four-way / Multi-directional Forklift 📅 2019 | ⏱ 5,614 h | ⚙️ GAS | 🏋️ 4,000 kg | 📏 Duplex Mast 4,600 mm 🔩 Fork positioner 1,150 mm | Forks 1,200 mm 🛞 Superelastic tyres (100%) | Free lift 2,200 mm 💯 Condition: Excellent – fully serviced & tested 📐 Dimensions: H: 2,400 mm | L: 2,400 mm | W: 2,250 mm Ideal for narrow aisles, long loads, wood, steel, or tube industries — suitable indoors & outdoors. FT LOGISTICS – Quality you can rely on. Service you can trust. 💼

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,674 h, load capacity: 5,000 kg, lifting height: 5,550 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,720 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 Z 10 - 12, rear tire type: cushion tires (black), rear tire size: 28 X 12,5 - 15, overall weight: 12,300 kg, empty load weight: 7,300 kg, total height: 2,550 mm, total length: 2,500 mm, total width: 2,400 mm, color: green, Equipment: CE marking, cabin, head guard, lighting, pallet forks, sideshift, # 🚜 COMBILIFT C5000XL DIESEL TRIPLEX 5550 MM FORK POSITIONER FULL FREE LIFT FULL CABIN READY FOR WORK ## ✅ FULLY SERVICED ## ✅ WARRANTY INCLUDED ## 🌍 WORLDWIDE DELIVERY AVAILABLE Are you looking for a reliable multidirectional forklift that is ready to generate value from day one instead of creating unexpected maintenance costs? This Combilift C5000XL has been professionally prepared by our experienced service team and is ready for immediate operation. The truck has undergone a complete technical inspection, full servicing, and extensive operational testing to ensure maximum reliability and performance. Ideal for production facilities, warehouses, steel service centers, and companies handling long or bulky materials. --- # ⭐ Key Advantages ✅ Fully serviced before delivery ✅ Startup warranty included ✅ Brand new Super Elastic tires ✅ Excellent technical and cosmetic condition ✅ Ready for immediate operation with no additional investment ✅ Live online video inspection available ✅ Worldwide shipping available --- # 📋 Technical Specifications Manufacturer: Combilift Model: C5000XL Year of Manufacture: 2017 Load Capacity: 5000 kg Engine: Diesel Operating Hours: 3764 h Mast Type: Triplex Lift Height: 5550 mm Fork Positioner Opening: 1360 mm Fork Length: 1200 mm Cabin: Full enclosed, heated cabin Truck Weight: 7300 kg --- # 📏 Dimensions • Overall Height: 2550 mm • Length: 2500 mm • Width: 2400 mm • Mast Closed Height: 2720 mm --- # 🛞 Tires Front: 23 x 10 - 12 Rear: 28 x 12.5 - 15 Condition: 100 percent brand new Super Elastic tires --- # ⚙ Equipment ✔ Hydraulic Fork Positioner ✔ Full Enclosed Heated Cabin ✔ Full Free Lift ✔ Working Lights --- # 🏭 Ideal For ✔ Timber Industry ✔ Steel Mills ✔ Steel Service Centers ✔ Structural Steel Manufacturers ✔ Pipe and Profile Handling ✔ Long Material Transportation ✔ Indoor and Outdoor Applications --- # 💼 Why Choose FT LOGISTICS FT LOGISTICS specializes exclusively in forklifts, multidirectional forklifts, side loaders, and warehouse equipment. Every machine is thoroughly inspected, professionally serviced, and tested before delivery to guarantee reliability and immediate productivity. We currently have more than 100 forklifts available from stock and supply customers throughout: 🌍 Europe 🌍 South America Kodsz Ni E Rspfx Ahbodu 🌍 Africa 🌍 Asia 🌍 Middle East --- # 🤝 What We Offer ✅ Complete pre-delivery inspection and servicing ✅ Warranty ✅ Professional technical support ✅ Leasing and financing solutions ✅ Worldwide transport organization ✅ Export documentation and customs support ✅ After-sales service --- # 🎥 Additional Services We can provide: 📹 Live online video demonstration 📸 Additional high-resolution photos 🎬 Detailed walk-around videos 🚛 Customized transport quotation to your location anywhere in the world --- ## ⭐ Hundreds of customers across Europe and worldwide trust FT LOGISTICS and continue to purchase from us thanks to the quality of our machines and professional customer service. ## FT LOGISTICS ### We Deliver Machines Ready To Work

Condition: ready for operation (used), load capacity: 750 kg, 3-axis welding positioner, 750 kg load capacity, control panel Tilt and speed infinitely adjustable from 0.05 to 1.0 rpm Clamping plate diameter: 0.8 meters Kodpfx Asxxvgzshbedu Height when tilted to center min. approx. 0.45 m + 0.1 m base, max. 1.1 + 0.1 m base Height horizontal min. approx. 0.56 m + 0.1 m base Length 2.0 m, width 1.05 m

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 7,295 h, load capacity: 5,000 kg, lifting height: 4,040 mm, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, power: 55 kW (74.78 HP), fork length: 2,000 mm, empty load weight: 7,000 kg, drive type: Diesel, Diesel forklift Load center: 600 Fork width: 120 mm Fork thickness: 65 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Kdedpfxsz N I R Ej Ahbeu Front tire type: Superelastic Front tire size: Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: Rear tire condition: 60 - 80% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, full cabin, air conditioning, full free lift

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,844 h, load capacity: 5,000 kg, lifting height: 7,500 mm, fuel type: electric, mast type: triplex, construction height: 3,500 mm, fork length: 1,600 mm, drive type: Elektro, Side loader Load center: 800 Mast type: Triplex Condition: Not operational Kdedszn A Ttjpfx Ahbsu Technical condition: normal Description: Battery defective, device not functional Fork positioner

Condition: ready for operation (used), functionality: fully functional, load capacity: 2,000 kg, Welding positioner, turntable, Strähler KT 2000 Kdjdsxq S I Sopfx Ahbou Machine description: welding positioner, turntable Manufacturer: Strähler Model: KT 2000 Condition: ready for operation (used) 2-ton load capacity welding positioner Adjustable speed and tilt With hand and foot remote control Clamping plate diameter: 1300 mm Horizontal height: 1100 mm Height when tilted to center: 850 mm Length: 2300 mm Width: 1300 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1.5 kW (2.04 HP), overall weight: 575 kg, total width: 1,250 mm, total length: 1,340 mm, total height: 1,300 mm, type of input current: three-phase, load capacity per stand: 2,000 kg, Electronic rotary positioner with counter bearing and height adjustment via grid hole pattern Rotator Rotating frame Rotary machine Custom fixture available upon request. Product description:  Our moveFLEX duo combines ultimate precision with maximum flexibility. The manually adjustable height, using a grid hole pattern on both sides, allows optimum adaptation of the working height to various requirements. The electric rotary axis enables smooth and precise rotation of the fixture. Thanks to the combination of integrated wheels and forklift pockets for safe transport by forklift truck, the moveFLEX duo is perfectly suited for changing work environments. Field of application:  The moveFLEX duo is ideal for welding, assembly, and processing tasks, especially for applications that demand flexible and precise positioning.  Suitable for use in covered, industrial-grade workshops with temperature range of 10-40°C.  Level, load-bearing workshop floor with a maximum incline of 1%.  The moveFLEX duo must be connected only to power sources equipped with a compliant residual current device (30mA) RCD Type B. Safety features:  Emergency stop device on the control panel. Technical features:  Height adjustment: Individually adjustable working height. Kedsx Hp Ttepfx Ahbjdu  Electric rotating mechanism: Precise rotation for optimal processing.  Flexible transport: Integrated wheels for easy movement.  Forklift pockets: Safe transport with a forklift truck.  Robust construction: Stable design for demanding industrial applications.  Safety & operator comfort: Intuitive controls for easy operation.

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 2,500 kg, Fork positioner ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical Condition: good Ksdpfxsx N Dpuj Ahbedu Description: Year 2020 ISO 2A (41 cm) Sideshift valve Capacity 2,500 kg Opening range 190-960 mm Width 1,150 mm Reachforks FEM 2 1,100 mm - 1,950 mm ID OS1745

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Kdsdpfx Aexztydjhbou Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Kodpfxsw Dfnho Ahbedu Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: used, functionality: fully functional, load capacity: 2,500 kg, Fork positioner ISO class: ISO class 2 = 1,000 - 2,500 kg Kdedsw Dwq Ijpfx Ahbsu Condition: Ready for use and fully functional Technical condition: good Description: ISO 2A (41 cm), sideshift, capacity 2,500 kg, opening range 320–1120 mm, width 1,150 mm, ID OS1543

Condition: new, load capacity: 1,000 kg, Column lift turning device 1000 kg load capacity, mobile with 2 pallet trucks Positioner Sideros Syncrolift Double column Radio remote control (wireless) Ksdpfxowulnpj Ahbjdu Year of manufacture: 2024 Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm (adjustable at extra cost) Vertical adjustment: 900 mm Clamping plate diameter: 500 mm Rotary drive: 0.4 kW Lifting motor: 2 x 0.4 kW Various column lift turning devices available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: new, Year of construction: 2026, Tapping Head Spindle Positioner 90° CORMAK GT24 The 90° GT24 tapping head spindle positioner is an advanced tool that significantly improves precision and efficiency in thread-cutting operations. Its main function is to ensure accurate alignment of the electric tapping machine at a 90° angle to the workpiece, allowing perfect spindle adjustment. Thanks to its innovative design, the GT24 positioner guarantees high accuracy and reliability, making it an essential accessory in any threading or machining workshop. Main Advantages of the GT24 Positioner Precise alignment: The positioner enables quick and accurate alignment of the tapping arm at a 90° angle to the workpiece, which is essential for achieving top-quality threads. Ease of use: The positioning process is quick and intuitive, saving time and increasing productivity. High stability: Thanks to its neodymium magnet, the positioner provides strong and secure attachment to the workpiece, minimising the risk of errors during threading. Compatibility: The GT24 positioner is compatible with a wide range of electric tapping machines available on our website, including models such as RGE30PW, RGE36PWx1200, and RGE36PWx1700. Robust construction: The GT24 positioner is made of high-quality materials, ensuring durability and resistance to intensive industrial use. Design and Technology of the GT24 Positioner The GT24 positioner features a sturdy construction designed for intensive use. Its key component is the neodymium magnet, which allows quick and reliable attachment to the workpiece. This technology gives users full control over accurate machine positioning, helping them achieve excellent results in less time. The unit also includes a 90° calibration system that allows precise setting of the tapping arm at a right angle. This setup enables quick adaptation to different threading tasks, making the GT24 a highly versatile and practical tool for any professional or production environment. Precision and Efficiency with the GT24 Positioner The GT24 positioner provides both precision and productivity. With its fast and simple positioning process, users can save valuable time otherwise spent on manual spindle adjustments. The alignment system ensures exceptional accuracy, resulting in better thread quality and reduced risk of machining errors. Furthermore, the positioner allows flexibility when working with various materials and thread types, making it an indispensable tool in production processes. Kdodpfx Aoycvfyehbsu Technical Specifications of the GT24 Positioner Type Neodymium adapter for spindle positioning Compatible with tapping machines RGE36PWx1200, RGE36PWx1700, RG24x1200, RG24PWx1200, RG24PWx1700, RG36PWx1200, RG36PWx1700 Angle range 90°

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 5,000 kg, fork length: 2,350 mm, empty load weight: 694 kg, construction width: 1,350 mm, opening width: 1,300 mm, Fork positioner Load centre: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for operation and fully functional Kdjdpfx Asy Ap T Sehbsu Technical condition: Good Description: If you have any further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Feel free to browse further on our website fleischmann-foerdertechnik. We are happy to inquire about attractive leasing & financing options and delivery at favourable rates for you. Trade-in of Linde equipment is also possible – even if you do not purchase a machine from us. Indicated operating hours were read at the time of listing. Subject to prior sale, changes and errors excepted. Fork length: 2,350 mm

Condition: new, Year of construction: 2024, Column lift turning device 3000 kg load capacity Positioner Sideros Syncrolift Double column Radio remote control (wireless) Year of construction 2024 Load capacity 3000 kg Minimum working height: 1100 mm Maximum working height 1600 mm Speed 1 rpm Vertical adjustment 500 mm Clamping plate diameter 800 mm Rotation 1.5 kW Lifting motor 2 x 1.5 kW Various column lift turning devices are available: Kdjdpfju Auumox Ahbsu 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote

Condition: used, machine/vehicle number: 26768, Year of construction: 2019, operating hours: 4,167 h, load capacity: 1,800 kg, lifting height: 3,140 mm, free lift: 1,450 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, Equipment: sideshift, .: 26768 Device details: Year of manufacture: 2019 Load capacity: 1800 kg Lifting height: 3140 mm Recorded operating hours: 4167 h Free lift: 1450 mm Mast type: Duplex Mast height: 2150 mm Length/width/height: 2100 / 1200 / 2150 mm Operating weight: 3506 kg ---- Equipment: * Overhead guard * 3rd valve * 4th valve * Roof cover * Full free lift * Front work light * Rear work light ----- Attachments: * Side shifter * Fork positioner ---- Additional device information: Bluespot Reversing warning Kodpfez Rpgkox Ahbedu One-pedal control Fingertip control Bluespot Reversing warning One-pedal control ---- The operating hours are generally recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments and sweepers immediately available for you. Of course, also for rent! We would also be happy to buy your OLD one. Do you have any questions? During our business hours from 7:30 a.m. to 4:00 p.m., you can reach us. We look forward to hearing from you! We speak English. Intermediate sale and errors for this offer are expressly reserved. In the dealer business, the device is sold in its current condition, without any rework. All information without guarantee, errors and changes reserved.

Condition: excellent (used), Year of construction: 2012, operating hours: 838 h, functionality: fully functional, overall weight: 268 kg, load capacity: 3 kg, arm reach: 1,434 mm, controller manufacturer: Yaskawa, controller model: DX100, teach pendant manufacturer: Yaskawa, repeat accuracy: 0.08 mm, Equipment: documentation/manual, Yaskawa MA1400 + HP20D robot system – only 838 servo operating hours. Two robots, coordinated operation, and flexible welding capabilities. For sale: a Yaskawa robot system in very good condition, tested and fully functional, for arc welding and material handling applications. The system includes a DX100 controller, a Fronius TransSteel 5000 welding power source, an automatic torch cleaner, and a well-equipped Siegmund welding table with a plasma-nitrided surface. Master-Slave control – Jigless welding. The two robots can operate synchronously: the 20 kg payload HP20D holds and rotates the workpiece in front of the MA1400 welding robot. For small parts, a pneumatic gripper allows for complex welding operations without a separate workpiece positioner. Remarkably low servo operating hours: only 838 hours. Main components: • 1 x Yaskawa MA1400 arc welding robot arm • 1 x Yaskawa HP20D material handling robot arm with a 20 kg payload capacity Kjdpfx Aez Rn Igehbedu • Yaskawa DX100 controller with Master-Slave functionality • 1 x Fronius TransSteel 5000 arc welding power source • 1 x Yaskawa TCS-C automatic torch cleaning unit • 1 x Siegmund S16 welding table, 1500 × 1000 mm, with an aluminum frame, height-adjustable legs, and a plasma-nitrided steel tabletop. Includes 4 screw clamps, 8 quick-release bolts, 4 aluminum stops, and 4 aluminum squares. Part number: 2-WS161510.1 • 1 x Siegmund S16 Basic Set #2: 10 stops, 10 squares, 16 fastening bolts, 8 clamps, and a 6-piece accessory and maintenance kit. Part number: 4-161300 The equipment can be viewed by prior arrangement. Price: EUR 59,000 net.