Used Pneumatic Slide for sale (13,867)

Condition: repair required (used), Year of construction: 2014, functionality: not functional, overall weight: 1,500 kg, for excavate Bwodpfx Acexggc Nsysw machine without flywheel drive motor and frequenzy regulator

Condition: used, functionality: fully functional, Wicona Wicpro Wic Pro Operating pressure: 0.8 MPa Air consumption: 5 liters/stroke Stroke: 30 mm Weight: 70 kg Punching modules: 1x Station 1 2x Station 2 1x Station 3 2x Station 4/5 1x Station 6 4x Alcoa 1x Schüco 299 783 1x Schüco 283 492 1x Schüco 299 445 The four pneumatic hand punches (2x Wicona, 2x Schüco) can be purchased optionally at a reasonable price. Bwedov I Sklspfx Acyow #8169

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic Bwsdpforbiv Aex Acysw - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage - Side support arms available

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Bodpjxf Ur Ajfx Acyoww Vertical stroke: 50 mm (pneumatic) Vertical adjustment on both support columns: 330 mm (manual, with clamping) Support columns, vertical guide column: Ø 55 mm Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance - End position dampers - Mounting plate for tool attachment 55 x 65 mm Required space (L x W x H): 320 x 170 x 550 mm Net weight: 16 kg Very good condition Various manipulators available, see our webshop.

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Bwodjxiza Uepfx Acyjw

Condition: used, New: Yes Empty weight: 6 kg Part suitable for: trucks Super-L 1" impact wrench W/6" Anvil (Twin hammer) Free speed 7.500RPM Max. torque 1763Nm (1300 ft-lb) Air inlet 3/8" Air hose 1/2" Air consumption 160 LPM (5.6 CFM) Bwsdpfxexh Evwo Acyew Overall length 441.6mm (17.4") Article nr.: Z99999044N-veiling Pneumatic impact wrench 1 " Super-L

Condition: good (used), Year of construction: 2004, gross working tank volume: 350 liters useful volume: 170 liters largest possible workpiece dimension (measured diagonally): 220mm total weight: 731kg drive power at 1500 rpm: 2,6kW Bwsdpfx Acjt E R Rhsyjw

Condition: used, Solid pneumatic gluing press with perforated plate for flexible arrangement of the press cylinders. One cylinder without a pressure shoe. pressing surface: approx. 2,800 x 1,000 mm Pressing surface: approx. 2,800 x 1,000 mm Bodpfx Aeviwqmscyjww press cylinder: 6

Condition: used, Year of construction: 2021, Drawer Clamping Machine – STROMAB STC 2500 B Technical Description: • Working capacity: 2100 x 1000 mm Bsdpfx Aoxg I Slocyjww • No. 2 working stations • Two-hand safety control button • No. 8 pneumatic cylinders, diameter 115 mm • Thrust per cylinder: 700 kg • No. 8 cast iron squares, height 170 mm Machine Configuration: • Frequency: 50 Hz • Standards: CE compliant • Electrical supply: 400 V – three-phase

Condition: used, TÜNKERS Pneumatic Punching Unit Pneumatic punching yoke, punching press, punching unit Year of manufacture: 2019 Model No.: 141-1040F Yoke No.: B-13-26/100 Pressing force: 4 tons (40 kN at 8 bar) Air connection: max. 8 bar Bsdpfx Aexf Uqxscyoww Throat depth: 100 mm Yoke width: 60 mm Hole diameter: Ø 2-13 mm Hole diameter (installed punch): Ø 4 mm Die diameter (outer): Ø 22 mm - Stripper via Vulkollan polyurethane elastomer Dimensions (L x W x H): 280 x 110 x 480 mm Weight: 36 kg Very good condition

Condition: new, functionality: fully functional, power: 485.43 kW (660.00 HP), fuel type: diesel, fuel: diesel, brakes: retarder, color: silver, gearing type: automatic, Equipment: ABS, spoiler, 🇬🇧 SCANIA 660 S V8 FULL AIR SUSPENSION 4+2 * BRAND NEW FROM FACTORY * AVAILABLE FOR IMMEDIATE DELIVERY * TO BE REGISTERED - 0 km - Full air suspension - Retarder - Full paint finish - Twin bunks - Stationary air conditioning - LED headlights - Navigation system - V8 interior trim - Reversing camera - Digital dashboard - Refrigerator - Alloy wheels CUSTOMIZED FINANCING OR LEASING OPTIONS AVAILABLE ON SITE. Bwedpfsxg Iv Dex Acyew FROM 24 UP TO A MAXIMUM OF 96 INSTALMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES OFFICE DOMENICO ESPOSITO S.P.A., EBOLI (SA) OFFICE - AUTHORIZED DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OPENING HOURS: MONDAY-FRIDAY 8:30 am / 7:00 pm - SATURDAY 8:30 am / 2:00 pm WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer - Reefer Semi-trailer – Lamberet - Schmitz - Isuzu - Flatbed - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way - 540 - 460 hp - Xway - X-Way - Three-way tipper - V8 - Scania - Frost Edition - Curtain side - Box - Tail lift - Refrigerated cell - Insulated with fridge - Box van Domenico Truck srl accepts no liability for any discrepancies regarding technical specifications, optional features, or characteristics that may differ from those stated in the description. We recommend checking the details of the specific vehicle.

Condition: used, New: Yes Empty weight: 2 kg Part suitable for: trucks V4800 Pneumatische slagmoersleutel 1/2" Maximaal koppel 1200.0 Nm Werkdruk 6.3 bar Luchtverbruik 184.0 l/min. Sleutel lengte 185.0 mm Bwsdpsxhzhvsfx Acyjw Gewicht 2.1 kg Snelheid van omwenteling 7500.0 omw./min. Luchtinlaat 1/4 inch Article nr.: VIGORV4800-veiling Pneumatic impact wrench 1/2" 1200NM

Condition: good (used), Year of construction: 2010, functionality: fully functional, new container with completely new layer Bwedpfjt Ahqyox Acyow PU-cover with ca. 6mm cover thickness usable volume: 165 liter trough inner measures: 1100mm x 460mm x 525mm empty weight: ca. 850kg motor speed: 1500 rpm sound insulating cabinet extern dimensions: 1900mm x 1250mm x 1550mm band filter device Seitz

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm Bwedpfx Aofv Awascyow table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Year of construction: 2022, condition: new, pneumatic tapping arm Model: R1950-08 Power: M2-M8 speed (rpm): 700 Air demand: 750l/min pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1950-12 Power: M3-M12 Speed (rpm): 400 Air demand: 750l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 23kg Adapter mounting: TCS 1B Model: R1950-16 Power: M3-M16 Speed (rpm): 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 27kg Adapter mounting: TCS 2B Model: R1950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1950-022 Power: M3-M22 Speed (rpm): 120 / 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Weight: 39kg Adapter mounting: TCS 2B Model: R1950-027 Power: M3-M27 Speed (rpm): 70 / 220 Air demand: 950l/min Pressure: 6-7bar Working range: Rmin 300mm - Rmax 1950mm Parallel arm structure: Stable arm structure (hard aluminum profile 58x40) Bwsdpfx Aoipmr Iscyew Weight: 39kg Adapter mounting: TCS 2B Standard accessories for all models: - Parallel arm - Air motor - 6 safety quick change tapping collet of your choice - Guide column with mounting flange - Radial boom (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced Bwsdoxf Up Uepfx Acyew - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: new, functionality: fully functional, power: 485.43 kW (660.00 HP), fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, suspension: air/air, Year of construction: 2025, Equipment: ABS, spoiler, SCANIA 660 S V8 FULL AIR SUSPENSION 4+2 *FACTORY NEW *IMMEDIATE DELIVERY *TO BE REGISTERED - 0 km - Full pneumatic system - Retarder - Full body paint - Double bunk - Standstill air conditioning - LED headlights - Navigation system - V8 interior trim - Reversing camera - Digital dashboard - Refrigerator - Alloy wheels OPTION FOR CUSTOMIZED FINANCING OR LEASING AVAILABLE ON SITE. FROM 24 UP TO 96 INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL – NAPLES BRANCH DOMENICO ESPOSITO S.P.A. – EBOLI (SA) BRANCH (OFFICIAL DEALER) MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 – 377 7064530 BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 – SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes-Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S – Semi-trailer – Refrigerated Semi-trailer – Lamberet – Schmitz – Isuzu – Flatbed – Crane – Tipper – 4 Axles – Rear 4 Axles – Tway – T-Way-540- 460 HP – Xway – X-Way – Three-Way Tipper – V8 – Scania – Frost Edition Curtainsider – Box – Drop-side Loader – Refrigerated Cell – Insulated with Fridge – Van Bedjxgiq Nopfx Acyeww Domenico Truck srl declines any responsibility for possible discrepancies in technical specifications, equipment, and features, which may in some cases differ from what is described. We invite you to verify the characteristics of the specific vehicle.

Condition: used, Empty weight: 25 kg Article nr.: W328999052-veiling Bsdpfexhy U Usx Acysww Used slide valve 8" manually

Year of construction: 2001, condition: good (used), Top closing stapler with clamping anvils. For coil staples. Closing of filled folding boxes made of single and double corrugated cardboard. Economical closing of corrugated cardboard boxes with joining and overlapping of flaps with clamping anvils. Suitable for single and double corrugated cardboard. Adjustable penetration depth to suit the type of carton. Bjdpova Nq Hofx Acyeww Ideally suited for use in packaging lines where a high degree of accessibility and efficiency must be ensured. - Housing made of hardened steel for long life. - Clamping anvils return immediately: up to 20 staple cycles/minute - 1,000 staples per coil: up to 10 times less frequent reloading compared to ordinary staplers For convenient operation, use a balancer in combination with a rotary arm system and a suitable spiral hose. See > accessories. MEROLOCK pneumatic stapler - For CR 1/34 spiral staples, arm length 18 mm, - with sound suppressor - With automatic return of the crimping anvil. - The clamping anvils are specially hardened to extend their life.

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm Bjdpfx Acofv Av Seyeww table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Year of construction: 2023, condition: new, Model: R950-08 Power: M2-M8 Speed (rpm): 700 Air demand: 750l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 38x29) Weight: 18kg Adapter mounting: TCS 1B Model: R950-12 Power: M3-M12 Speed (rpm): 400 Air demand: 750l/min Bodpoipmpzjfx Acyjww Pressure: 6-7bar Working range: Rmax 950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 18kg Adapter mounting: TCS 1B Model: R950-16 Power: M3-M16 Speed (rpm): 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Parallel arm structure: Stable arm structure (hard aluminum profile 38x29) Weight: 25kg Adapter mounting: TCS 2B Model: R950-020 Power: M3-M20 Speed (rpm): 150 / 400 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 29kg Adapter mounting: TCS 2B Model: R950-022 Power: M3-M22 Speed (rpm): 120 / 300 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 29kg Adapter mounting: TCS 2B Model: R950-027 Power: M3-M27 Speed (rpm): 70 / 220 Air demand: 950l/min Pressure: 6-7bar Working range: Rmax 950mm Structure parallel arm: Stable arm structure (hard aluminum profile 58x40) Weight: 29kg Adapter mounting: TCS 2B Standard accessories: - Parallel arm - Air motor - 6 safety quick change tapping collet of your choice - Guide column with mounting flange - Radial boom (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Bwodpfx Aou H R Iwecyjw Weight: approx. 65 kg Very good condition

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece Bsdpeu D Tz Ujfx Acyoww

Condition: used, Pneumatic toggle press BURGER type D04 No. 4497 Year of construction approx. 1972 Compressive force max. 6 ton. Bwodpfx Ajvcdvpecysw Projection 150 mm ram stroke 39 mm Table size 340 x 270 mm Drop-through opening Ø 46 mm Installation height max. 160 mm Tool holder Ø 25 mm ram plate Ø 90 mm Pneumatic operating pressure 5 bar Mains connection 220 V 50 Hz - Pressure regulator for press force adjustment - stroke height adjustment 7, 21, 40 mm - electric foot switch - Table height adjustment Space requirement L x W x H 700 x 500 x 1300 mm Weight 240 kg good condition

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Bedpfstrpiijx Acyoww Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition