Used Pneumatic Drum Pump for sale (17,721)

Condition: good (used), 1 DEMAG drum brake type: TH806/60 - RT315 TH806 2 ELDRO electro-hydraulic lifting device Ed 1250/60 Bdsdpfju Uvmfsx Ab Tok

Condition: excellent (used), brake drum -Bore: Ø 28 with keyway -Outer diameter: 220 mm -Inner diameter: 200 mm -Recess: Ø 67 mm -Number: 8 drums available Bdsdpfx Abjb A Szme Tsk Price: per piece -Weight: 21.5 kg/piece

Year of construction: 2022, operating hours: 2,113 h, condition: excellent (used), functionality: fully functional, Drum dryer Agromech M-829 with a chip-feeding stoker for the furnace. The drum dryer is equipped with a coal furnace adapted for burning wood waste or sawdust briquettes. Bdodpsxzup Tefx Ab Tjk The entire drying process, as well as the regulation and control of the drying air temperature, is semi-automatic and carried out by the dryer operator. THE DRYER IS BUILT FROM THE FOLLOWING MAIN COMPONENTS: * Coal furnace with thermal insulation, adapted for burning sawdust briquettes and wood waste * Wet sawdust feeder – chain-slat type, pit-installed, smoothly controlled by an electric inverter with a system for smooth dosing of the material to be dried * Insulated loading connector * Thermally insulated drying drum, length 9.00 m * Discharge chamber for dry material * Main dedusting cyclone with feeder * Main radial fan * Electrical control cabinet with temperature measurement and control instrumentation * Inclined screw conveyor for discharging dry material TECHNICAL CHARACTERISTICS: 1. Nominal capacity of the dryer at initial sawdust moisture 40–45% and final 15% – 1,000 kg/h 2. Amount of evaporated water – 1,100 kg/h 3. Maximum thermal power of the solid-fuel furnace – 1,000 kW 4. Maximum temperature of drying air at the drum inlet – 600–650°C 5. Average fuel consumption: * Hard coal or fuel with similar calorific value: 200 kg/h * High-calorific sawdust briquettes: 250–300 kg/h * Wood chips with moisture up to 35%: 250–350 kg/h 6. Total installed electrical power – 17 kW 7. Total weight of the dryer with refractory insulation – 16,500 kg The dryer was manufactured, assembled, and commissioned in November 2022. Operating hours: 2 113

Condition: used, Pneumatic Clutch Press Belt Model BREN 160 TN (1323) Liquidation by auction due to end of activity and definitive closure of a used industrial machinery tools company Brand: BELT Model: BREN 160 Frame type: Gooseneck Number of guides: 2 Bedpjxzui Tjfx Ab Todk Main Technical Features Nominal force: 160 tons Stroke: 20 – 160 mm Strokes per minute: 42 Table height to slide: 660 mm Ball elongation: 90 mm Adjustable stroke: Yes Engine power: 12 hp (≈ 8.8 kW) Dimensions Table: 1250 × 610 mm Slide: 850 × 500 mm Table hole: 350 × 350 mm Gooseneck depth: 320 mm Opening between uprights: 395 mm Distance from table to floor: 850 mm

Condition: excellent (used), mileage: 412,305 km, power: 199 kW (270.56 HP), first registration: 12/2008, fuel type: diesel, color: other, axle configuration: 4x2, fuel: diesel, wheelbase: 3,900 mm, driver cabin: day cab, gearing type: automatic, suspension: steel-air, Year of construction: 2008, Equipment: differential lock, Structure Volume: 9400 m3 Aufbau ca. 9.000 Liter Behältergröße ca. 2.000 Liter Spülwasser ca. 7.400 Liter Schlammvolumen Kipper Hyd. Offnen Vakuumsystem Vacuum pump: ELMO 2BE1-253-OBY4 The NASH 2BE1 liquid ring vacuum pump and compressor series covers a broad range of suction volume from 100 to 22,500 m³/h (60 to 13,000 ACFM), vacuum range of 33 mbar abs. (to 1 inHgA) and pressure of 3.5 bar abs.(50 psia). Hochdrucksystem URACA KD716 ca. 320l / bei 170bar hydraulische Spülschlauchhaspel mit ca. 160m HD-Schlauch DN25 hydraulische Spülschlauchhaspel mit ca. 60m HD-Schlauch DN 13 Besonderheiten Tankwerkstoff: Edel-Stahl = More information = General information Cab: single Registration number: BV-RD-37 Technical information Transmission: 12 gears, Automatic Make of engine: Scania Front axle: Max. axle load: 9000 kg; Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Suspension: air suspension Measures Dimensions (LxBxH): 705 x 250 x 310 cm Weights Empty weight: 13.900 kg Bdedpoxzt Twsfx Ab Tjk Carrying capacity: 7.951 kg GVW: 20.500 kg Functional Water tank: 2.000 l Tipper: Back Condition Technical condition: very good Visual appearance: very good Number of keys: 2 (2 hand transmitters) = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Bdodpfx Absxmline Tsk

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 940 mm, grinding height: 150 mm, – Year of manufacture: 2007 TECHNICAL SPECIFICATIONS: – Grinding width: 940 mm – Grinding height: 150 mm – Min. workpiece thickness: 0.8 mm – Min. workpiece length: 230 mm – Feed motor power: 0.25 HP – Main motor: 5.55 kW – Grinding rollers: 2 x ø 152 x 940 mm – Speed: 1400 rpm – Feed speed: 2 or 3 m/min Bdjdpfjw Ip Rtox Ab Tek – Extraction port diameter: 2 x ø 100 mm – Motor power: (400 V) 5600 W / S1 100% – Dimensions (L/W/H): 1090 / 1420 / 1090 mm – Weight: 440 kg

Condition: good (used), Pneumatic valve, roller lever valve, limit switch, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, switching valve, pressure build-up valve -Manufacturer: Festo, pneumatic valve, roller lever valve -Type: 8982 L-3-1/4 B -Operating pressure: 0.95...10 bar Bdodpfsxx Sm Rex Ab Tsk -Number: 4x valves available -Price: per piece -Dimensions: 105/50/25 mm -Weight: 0.2 kg/pc.

Condition: used, functionality: fully functional, first registration: 05/2007, Year of construction: 2007, ASTRA VI HD8 64.41-80 with CIFA 35m concrete pump First registration: 22-05-2007 – Euro 5 Km: 295,063 Operating hours: 5,485 4 axles Bdsdpfx Ajxztakob Tjk CIFA K35XZ – PA1006 – 35m equipment Tyres: 50/60% Valid inspection Good condition Available immediately WE CONSIDER TRADE-INS OF VEHICLES FROM ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: used, Pneumatic Clutch Press, BELT brand, Model 160 TN. (3211) Being liquidated at auction due to cessation of activity and permanent closure of a used industrial machinery dealer. Brand: BELT Model: BREN 160 Frame Type: Gooseneck Number of guides: 2 Main Technical Specifications: Nominal force: 160 tons Bodpfsxzuhiex Ab Tsdk Stroke: 20–160 mm Strokes per minute: 42 Table height to ram: 660 mm Ram extension: 90 mm Adjustable stroke: Not specified (adjustment available) Motor power: 12 hp (≈ 8.8 kW) Dimensions: Table: 1250 × 610 mm Ram: 850 × 500 mm Table aperture: 350 × 350 mm Gooseneck throat depth: 320 mm Distance between uprights: 395 mm Distance from table to floor: 850 mm Overall height: 3360 mm Width: 2050 mm Depth: 1900 mm

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Bdodpfxewbqrto Ab Tsk Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Find more new and used items in our store! International shipping costs on request!

Condition: excellent (used), For sale: Professional dot peen marking machine PRO PEN P5000 (GravoTech Marking SAS), distributed by HAHN+KOLB Gruppe. This is a fully industrial-grade device designed for permanent marking of metal and plastic parts—serial numbers, logos, codes, and production markings. Specifications: • Model: Propen P5000 Pn/d • Year of manufacture: 2010 • Power supply: 100–240 V, 50/60 Hz • Power: 150 W • Operating pressure: 5.5 bar (pneumatic supply) • Manufacturer: GravoTech Marking SAS, France • Operator panel with touchscreen + HP keyboard • Robust worktable with guides. The machine is complete, fully functional, and ready for operation. Ideal for workshops, production plants, tool rooms, and wherever quick and precise permanent marking is required. Very good condition—well-maintained unit with minimal signs of use. Bsdpfx Abjw R Spqj Tedk

Condition: used, axle configuration: 3 axles, first registration: 10/2012, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,880 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445 / 45 / R19.5, color: red, Year of construction: 2012, General information Model code: ## Axle configuration Tyre size: 445 / 45 / R19.5 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 7.750 kg Bsdpfx Aexzrbmjb Todk Carrying capacity: 33.250 kg GVW: 41.000 kg History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), mileage: 105,756 km, power: 338 kW (459.55 HP), first registration: 10/2017, fuel type: diesel, color: white, fuel: diesel, wheelbase: 5,650 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, = Additional options and accessories = - PTO shaft = Further information = Bdjdpfsxzq Hhsx Ab Tok AdBlue system: Yes Number of cylinders: 6 Engine displacement: 10,837 cc Unladen weight: 20,300 kg Payload: 16,700 kg Gross vehicle weight: 37,000 kg Fuel tank: 500 litres Technical condition: good Visual condition: good

Condition: used, functionality: fully functional, mileage: 16,917 km, Year of construction: 2023, operating hours: 489 h, Mercedes Benz Arocs 3246 with 37 m concrete pump Year 2023 EURO 6E Km 16917 H. 489 SANY SY37 RZ5-160 equipment 80% tyres Excellent condition Valid inspection Available immediately Bsdsxzr Uyspfx Ab Tedk WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU.

Condition: good (used), Manufacturer: unknown Type press: P 14 (?) Type: Table mounting press Dimensions: 150 x 220 x 750 mm Table dimensions: 1,500 x 700 x 820 mm Bdjdpfx Asrt Immeb Tek Weight: approx. 80 kg

Condition: good (used), Year of construction: 2008, Translift TL 24.70 Chainlift, year 2008, with steering, hydraulic tank and pump = Further information = Year of manufacture: 2008 Bjdoxzp A Iepfx Ab Tsdk Gross vehicle weight: 24,000 kg Pump: Yes Technical condition: Good Visual condition: Good For more information, please contact Gerrit Haverhoek.

Condition: good (used), AZO vacuum pneumatic conveying system Bjdpfx Abswyfyij Tedk Pneumatic conveying systems for granular, powdery, and lumpy bulk materials Vacuum filter hopper with DMN150 dosing airlock Separator with DMN200 dosing airlock Vacuum pump 3kW 2860 rpm -260 270 mbar Pipework 50mm and 80mm See our other listings VMA Wekerom

Condition: excellent (used), power: 129 kW (175.39 HP), Year of construction: 2002, Empty weight: 17.100 kg Make of engine: CAT CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Please contact Nedtrax B.V. for more information Caterpillar CS-663 E Year: 2002 Bdedsxznxzopfx Ab Tok Weight 17100 kg 129 KW CE-Marked In good condition

Condition: used, Pneumatic punching unit TÜNKERS, pneumatic power cylinder Pneumatic punching bracket, punching frame, punching unit, punching frame Bsdpfxexf Uqxo Ab Tedk Year of manufacture: 2019 Model No.: 141-1040F Punching frame No.: B-13-26/100 Pressing force: 4 tons (40 kN at 8 bar) Air connection: max. 8 bar Throat depth: 100 mm Frame width: 60 mm Hole diameter: Ø 2-13 mm Hole diameter (installed punch): Ø 4 mm Die diameter (outer): Ø 22 mm - Stripper made of Vulkollan polyurethane elastomer Dimensions L x W x H: 280 x 110 x 480 mm Weight: 36 kg Very good condition

Condition: used, functionality: fully functional, mileage: 78,500 km, Year of construction: 2002, SCANIA P 114-380 with 35 m concrete pump Bodpfx Ajxzr Umsb Tjdk Year 2002 - Euro 3 Km 78,500 Cifa K35 XZ superstructure (Year 2007) 3 axles (6x4) Tyres 50/60% Good condition Immediately available WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY CATERPILLAR, FIAT HITACHI, KOMATSU

Condition: used, This listing is for a B.BRAUN Unita perfusor/ syringe pump with mechanical display. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFTF046 Listing name: B.BRAUN Unita S 871042-2 Perfusor/ Syringe Pump Bedpfsxzibwjx Ab Todk

Condition: excellent (used), power: 107 kW (145.48 HP), Year of construction: 2004, operating hours: 4,420 h, Empty weight: 13.750 kg Make of engine: CAT CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Please contact Nedtrax B.V. for more information Caterpillar CS-573 E Year: 2004 Reading hours: 4420 H Weight 13750 kg 107 KW CE-Marked In good condition Bdedexznr Uopfx Ab Tsk

Condition: used, REPEATED ITEM Garner Denver maybe Elmo Rietschle V-VTA 80 vacuum pump V-VTA pumps developed by Elmo Rietschle for continuous operation for printing and paper handling machines. V-VTA pumps come with bearings on both sides of the rotor. Flange mounted motor with bolt coupling. V-VTA offers high efficiency, silent operation, easy to operate and service. Sound cover allows a ducted cooling air outlet either from one side only or from both front and back. Also infomration on this site SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFPR017 Bodpfxoxziats Ab Tjdk Listing name: GARNER DENVER VTA 80 C 100 Vacuum Pump

Condition: used, This listing is for a Charles Austen Pump Dymax 14 Diaphram Specifications Maximum Flow, l/min - 14 Maximum Pressure - 2.0 bar / 29.0 psi Maximum Vacuum, mbar - 240 Voltage Options - 230V AC (50hz) 110V AC (50/60hz), 230V AC (50hz) Dims, L x W x H, mm - 210 x 125 x 151 Bdjdexzh Dkjpfx Ab Tjk