Used Pipe Roller for sale (10,473)

Condition: used, 3 ball bearing castors, width: 320 mm Height of castors above floor: 970 mm Total length: 1200 mm Nodoctb Dgjpfx Ahvscp Roller block: Roll width: 400 mm Roller height above floor (adjustable): 970 mm

Condition: ready for operation (used), Pitch: 10 mm Thread length: 1460 mm thread Ø: 30 mm Nodpfx Aed Atq Rshvjcp Spindle nut mounting: 60 mm Ø

Condition: as good as new (ex-display), Cable protection tubes, made of glass fibre, in 4 dimensions and 6 m length. The tubes were developed and manufactured in 1995 for a new water pipe system, which unfortunately did not succeed. Ncedpsb Nxc Tjfx Ahvep Available are: Outer-Ø 16, 20, 25 and 32 mm.

Condition: ready for operation (used), Pitch: 20 mm Thread length: 2330 mm Ncjded Atq Ejpfx Ahvjp Thread Ø: 38 mm Nut length: 130 mm

Condition: ready for operation (used), Pitch: 10 mm Thread length: 1165 mm Ncsdpfxsd Atq To Ahvjp thread Ø: 30 mm spindle nut mounting: 28 x 49 mm Ø Total length of spindle: 2170 mm

Condition: ready for operation (used), Year of construction: 2006, Speeds up to: 2250 rpm Feed rate: 0 - 300 mm/min Ncodpfx Asyfgd Ejhvop Drive power per motor: 2.9 kW Electrical connection: 400 V Weight: 395 kg Required space: 4100 x 1670 x 1450 mm

Condition: ready for operation (used), Length: 2100 mm Width: 285 mm Nodpfsvf Dpuox Ahvjcp 5 rollers: 240 x 32 mm Ø on 2 tubular stands with square feet, 1000 mm high

Condition: ready for operation (used), Total length: 4950 mm 50 rolls, 290 x 50 mm Ø Nedpsvf Dqfjfx Ahvscp One side widening with support: 230 x 80 mm high The other side support with dotted measuring tape: 3000 mm lying on 5 double stands, 870 mm high

Condition: ready for operation (used), Length: 2010 mm Width: 210 mm 8 rollers mounted on L-bar, 50 mm Roller diameter: 48 x 190 mm on square tube stand: 30 x 30 x 960 mm high Nsdpevf Dphofx Ahvecp

Condition: ready for operation (used), 7 rolls, width: 300 mm Ncjdpfxeixzzkj Ahvjp Required space: 1530 x 380 x 530 - 550 mm

Condition: good (used), Polar Mohr RA-4 Jogger with Roller and Scale The machine is ready for operation, after inspection. This is the latest design from a German manufacturer. Technical specifications: Maximum format: B1+ Stack height: 150mm Weight: 550kg (shaft) + 250kg (scale) Power supply: 400V Air-squeezing shaft Air table Right/left shaking option Tilt angle adjustment Shaking frequency adjustment (inverter) Squeezing shaft force and speed adjustment. Chrome-plated table surface Nodpfx Ahjywdnaovscp The machine is also equipped with a Bizerba sheet weighing system, which allows for counting, taring, batching, and more.

Condition: excellent (used), Year of construction: 1995, 3 HEIN TVP 160 PIPE SAWS in stock Year of manufacture: 1995 With chip jaws Application: Cutting and chamfering PE, PP, and PVC pipes: Nedpfjvwm N Uox Ahvocp Smallest diameter: 30 mm Largest diameter: 160 mm Also suitable for short lengths from 10 cm Condition: The pipe saw is operational The saw is my property Location: Sachal Extrusionsmaschinen, Bahnhofstr. 6 D-26345 Bockhorn-Grabstede, Germany

Condition: new, 40 mm 8,5 U/min Njdpfx Ahoyv N A Tevscp 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400 V weight 395 kg Overall size 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used

Condition: new, 95 mm Shaft diameter 30 mm Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn Nodpeyv N A Hofx Ahvecp different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, I-beam section - flat steel 80x20 (d1200) mm I-beam section - upend 80x25 (d2100) mm L-beam 50x50x6 (d1000) mm bar material - diameter 40 (d800) mm square material 60x60x3 (d4000) mm rectangle 80x30x3 (d6000) mm tube diameter max. 70x2 (d1600) mm tool adaptor 60 mm roll diameter 177 mm bending speed 6,4 m/min total power requirement 4 kW machine weight ab. 970 kg Overall size 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 driven rollers - Digital display Nsdpfx Ahsyv Nwqevjcp - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable Ncjdpfx Aoyv Nniohvop - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers

Condition: new, round material 40 mm tube diameter 70x2 mm square material 80x30x3 mm L-beam 50 x 5 mm Nodpfx Ahjyv Nk Revjcp roll diameter 157 mm I-beam section - upend 50 x 15 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, R10-R260 max. 210 ° 54x2 mm 42x2,5 mm Ncsdpfsyv I Uhex Ahvep 42x3,5 mm 30 mm bending speed max. 4 U/min Amount of programms 30x9 voltage dreiphasig 220-400 V total power requirement 1,1 kW dimensions of the machine ca. 1000 x 410 x 570 mm weight of the machine ca. 80 kg Accessories / equipment: - Machine structure: aluminum alloy - Base: welded steel - Standard accessories (including footswitch, operating instructions)

Condition: new, R10-R260 210 ° bending speed 2 U/min 1 1/4" x 3,5 mm einphasig - 230 V drive motor 1,1 kW < 70 dB weight of the machine ca. 80 kg dimensions of the machine ca. 410 x 1000 x 570 mm Accessories / equipment: Ncsdpfx Ajyv I Tkohvop Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed

Condition: new, Year of construction: 2025, tube diameter 20 - 76 mm grinding band dimension 100 x 2000 mm 0 2905 U/min band speed 30 m/sec 0 3 kW voltage 400 V Njdsyv Nvyopfx Ahvjcp weight 200 kg

Condition: good (used), functionality: fully functional, roll width: 500 mm, total width: 630 mm, roll spacing: 100 mm, axle spacing: 60 mm, Roller Conveyor Curve / 90 Degree Bend Condition: Used Model: Roller Type: 90 Degrees Overall External Width: approx. 1840 mm Overall Internal Width: approx. 1080 mm Width incl. Motor: approx. 630 mm Conveyor Width: approx. 500 mm Roller Pitch: approx. 100 mm Axle Pitch: approx. 60 mm Rollers: Plastic Material: Steel, Plastic, Aluminium Colour: Light grey, Black Includes SEW Motor Stock: 2 units available Price per unit Ncedpfx Asyxfh Rehvop Internal Item Number: 2026032601 The conveyor system was in operation until dismantling. Condition: Fully functional, with signs of use Ideal for rapid material handling Collection address: Industriestraße 5 (47918 Tönisvorst) Professionally dismantled and packed Thanks to the excellent build quality, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a custom quotation or advise you regarding planning or installation questions. Simply inform us of your requirements and site conditions. Take advantage of our many years of experience and our outstanding network of specialists. We have successfully completed projects for companies in various industries, e.g.: logistics, pharmaceutical, manufacturing, and electronics sectors. Together, we will find ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer fully automated sorting technology or complementary components such as picking racks or containers.

Condition: good (used), We are clearing out our warehouse and have various steel pipes for sale. In total, it is approximately 50 tons of steel pipes, nearly all of which are thick-walled tubes. 13CrMo4-5 Njdpfx Asyxfgtohvscp 16Mo3 10CrMo9-10 Material certificates are partially available. Dimensions upon request. Price: €0.5/kg Sale only in large quantities or as a complete lot. Sold without warranty or guarantee. Inspection possible by appointment.

Condition: used, Year of construction: 2021, operating hours: 5,600 h, Equipment: all wheel drive, Komatsu D65EX-18E0 (2021) * Engine power: 164 kW * Operating weight: 20,190 kg * Drive: Hydrodynamic (torque converter) * Undercarriage: EX version * with ripper Ncodpfxoyxcx Hj Ahvop The machine has only 5,600 operating hours and is in like-new condition.

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. Nodpfx Asxmiirshvocp The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Condition: good (used), power: 68 kW (92.45 HP), color: other, Year of construction: 2000, operating hours: 1,463 h, Technical information Make of engine: Diesel Top speed: 12 km/h Empty weight: 7.460 kg Condition Technical condition: good Visual appearance: good Ncsdpfx Aeyxalkohvsp Identification Serial number: 45244 Other information Remanufactured: Yes Delivery terms: FCA, DAP, EXW Rental currency: EUR Production country: DE Additional information Please contact Sales Department for more information = Additional options and accessories = - Battery disconnector