Used Pipe Perforation for sale (3,754)

Condition: used, Year of construction: 2006, pipe diameter (max.): 35 mm, bending angle (max.): 150 °, total length: 3,000 mm, input voltage: 380 V, wall thickness: 3 mm, 2006 wafios BER35 Nodsvftpdjpfx Af Eodc

Condition: used, overall weight: 38,000 kg, empty load weight: 8,020 kg, maximum load weight: 29,980 kg, axle configuration: 3 axles, loading space length: 9,750 mm, loading space width: 2,360 mm, loading space height: 2,000 mm, loading space volume: 46 m³, first registration: 12/2019, next inspection (TÜV): 10/2026, suspension: air, tire size: 385/65 R22,5, Year of construction: 2019, Equipment: ABS, Unladen weight: 8,020 kg, Gross permissible weight: 38,000 kg, Cargo space (L x W x H): 9,750 mm x 2,360 mm x 2,000 mm, Tyre size: 385/65 R22.5, Cargo space volume: 46 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Underrun protection, Electronic braking system (EBS), 1x15-pin and 2x7-pin connector sockets, Anti-spray, You can find an overview of all our available vehicles on our website. Need financing? We offer tailored financing solutions, as well as full-service packages or telematics services. We would be happy to advise you personally. Nedpfsxn Hl Hex Af Eodc

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, total width: 3,100 mm, total length: 2,250 mm, total height: 1,900 mm, type of input current: three-phase, overall weight: 1,345 kg, PELTOC drum winder is developed more then 10 years different pipe and hose winding solutions development experiences. There has been used only solutions what have been worked a years and been proved by self. Peltoc develop all produced machines only quality producer and all over world widely available standard components, considering on development highest service factory, minimal wear and service parts, lowest energy consumption and thanks for that we can ensure longer lifetime and more reliable solutions. Producer: PELTOC OÜ Model: HOHL 2400 Maximum drum rotation speed: 1 - 30 RPM (Option up to 200RPM) Maximum winding speed m/min: 0 - 200m/min. (Depends from drum inside diameter) Maximum full load drum weight: 1700 kg (Option up to 4000Kg) Maximum drum outside diameter: 2400 mm (Option up to 4000mm) Minimum drum diameter to lift from floor: 1000 mm (Option from 600mm) Maximum drum outside width: 1250 mm Minimum drum outside width: 730 mm ( Option to 300mm. Need to order extra spacers for narrower drums) Drum center hole diameter: 000 mm (For each client size) Compressed air: Not needed! Electricity: 400V / 50 Hz / 3 Faze. Machine have 16A plug Weight: 1345 Kg Nedeqwg Hyepfx Af Eedc Dimensions: 2250 x 3100 x 1882 mm (L x W x H)

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu wall strength 2.0 mm bar material - diameter 30.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE Nedpfx Ajxaa Sdsf Ejdc

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 65 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of working material length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop feature • Remote assistance • Bending with or without mandrel • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic claw clamp • Electrical panel safety lock and main switch panel lock • Electrical system cooler • Overload protection • Automatic dispatch of detailed operation reports OPTIONAL EQUIPMENT (Not included in price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m, priced per meter) • Ball mandrel and wiper die set • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler Ndedpfx Afsxircge Esc CAPACITY MB-65 CNC/5 AXIS Maximum capacity mm: Ø65x3mm Maximum bending radius mm: 250mm Maximum bending angle °: 190° Hydraulic pressure bar: 50-200 Working length mm: 3000 Rotation tolerances: Adjustable Bending power kW: 22.5 Dimensions LxWxH mm: 6350x1400x1600 Weight kg: 3950

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 0760801000602, Multiflex tube cutting machine Adige Operational Nedexmg Aijpfx Af Esdc

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max Ndodpog Dvdcjfx Af Ejc - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 48 h, machine/vehicle number: BD38CNCOMPACT, Max. pipe OD 38mm CNC control Ndodpfovu R Amex Af Esc Compact Model

Year of construction: 2019, condition: like new (used), functionality: fully functional, Jutec 5045 Pipe Bending Machine – Like New – Half Price! For sale: Jutec 5045 semi-automatic pipe bending machine, year of manufacture 2019, used only for a few months. The machine is in almost new condition and immediately ready for operation. Location: Tatabánya, Hungary Price: HUF 10,000,000 net (approx. €25,000) – around half of the original price! Technical specifications: Njdpfx Aoxliuxef Eedc Model: Jutec 5045 Type: Electromechanical, semi-automatic pipe bending machine Capacity: Ø 6–50 mm pipes Suitable for tight bending radii, high precision Automatic central mandrel lubrication with minimal lubricant consumption Pneumatic valve control Spindle-driven frame adjustment Tooling included: • Ø 33.7 mm pipe, bending radius R = 70 mm • Ø 42.4 mm pipe, bending radius R = 90 mm Condition: Hardly used, like new Fully operational and immediately available Regularly serviced, stored in a dry indoor environment Viewing by appointment. Exchange or trade-in may be considered.

Year of construction: 2009, condition: as good as new (ex-display), the original packed parts you find in the attached file, the parts in the blue boxes are not counted Ndodpfef S Hc Ssx Af Ejc any question, just ask

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, pipe diameter (max.): 51 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, Equipment: CE marking, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 Sets of Dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo Motorized Feed Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H and V Axes Ndsdpfx Ajxircaef Esc • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling capability • 3D Bending Simulation • Collision Simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Workpiece Material Length • Calculation of Estimated Bending Time • X-Y-Z to Y-B-C Conversion • Emergency Stop Foot Pedal with Mobile Function • Remote Assistance • Mandrel Bending and Mandrel-less Bending • Safety Plate behind Bending Head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Guide System • Hydraulic Chuck Clamp • Safety Lock on Electrical Cabinet and Keyed Panel Lock • Electrical System Cooling Unit • Overload Protection • Detailed Operation Report Automatically Sent OPTIONAL EQUIPMENT (Not Included in Price) • Additional Sets of Dies • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Additional Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable tube diameters) • Hydraulic Oil Cooler CAPACITY MB-51 CNC/5 AXIS Maximum Capacity mm Ø51x3 mm Maximum Bending Radius mm 250 mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50–200 Working Length mm 3000 Rotation Tolerances ±0.1 Bending Speed kW Variable LxWxH mm 6350x1400x1600 Weight kg 3750

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 022607, Lavatubi La Chatre mod. 50 Year 2002 Operational Nedpfx Asxmgy Isf Eedc

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system - Feed length approx. 850 mm The manual pipe bender should be permanently mounted on a table or frame (not included). Ndedpfxettagdo Af Esc We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 6 h, functionality: fully functional, machine/vehicle number: HS-40A, controller model: auto or semi-auto, Technical Parameter Description of Steel Pipe Sealing Machine HS-40A Automatic Heating Sealing Machine. Its main features are as follows: This full - automatic heating sealing machine is equipped with a Kewei intelligent controller and a touch - screen for control, hydraulically driven, with high - frequency heating, and features man - machine interactive operation. The setting input is simple and convenient. It allows for arbitrary selection and automatic conversion between manual and automatic modes. The movable switch button has two functions: sealing and positioning. It has high safety and a counting function, enabling one - time forming of the seal. The overall machine has stable performance and high efficiency, making it an ideal equipment in the pipe - fitting sealing processing industry. A high - efficiency hydraulic cylinder drives the rack, and the gear rotates to achieve sealing. The specially designed fixture has strong and reliable clamping force, ensuring safety without damaging the surface of the workpiece. The coolant circulates automatically to ensure the long - term operation of the equipment. Nsdpfxevu Ryfe Af Eodc Sealing capacity (steel, stainless steel, alloy materials, etc.). Note: Tests are required for different pipe - fitting materials. HS-40A Automatic Heating Sealing Machine include: 1. Equipment Instruction Manual. 2. Equipment Operation and Debugging Instruction Manual. 3. Maintenance Record Sheet. It takes about 30 - 40 seconds for spinning both ends of one product. The wall thickness of the pipe is 1.0 - 2.5mm. The length of the pipe is 50 - 600mm.

Condition: good (used), Pipe tap Make Reishauer Nodpfxodx Uzho Af Eodc 5/8 GG 85 mm long

Year of construction: 2018, condition: excellent (used), The line is consisting of different producer : It is 2 layer , PE 100, pressure pipe production : Ndedpfxeuuah Uj Af Ejc 1. Three extruders (inner, outer layer and stripes) with automatic material loaders. Outer layer: LIANSU LSS 65/35, Main extruder , 350 kg/h,2018 Y Inner layer: LIANSU LSS 45/30, Co –extruder, max 40 kg/h, 2018 Y Stripes: co extruder 2. Extrusion die head complete with all necessary tools, die adaptors, heaters, for all dimensions 20-125mm. Lamellar calibrators up to Ø90mm, SDR 26, 17, 11, and with combinations can be produced SDR 9 and 7.4. Compete list with all tools (in attachments). 3. Vacuum tank, Periplast, year 2001, 6m length, with water-spey nozzles for cooling. 4. Additional cooling chamber, 6m length, Periplast , year 2001. 5. Unit for permanent and long term readable thermal marking, GNATA FILIPPO, Italy, type MAC 140/CCRC/AT-2. 6. Haul off, Liansu, ISPQ 110, year 2013.

Year of construction: 2022, condition: used, New: Yes Field of application: Internal logistics Empty weight: 10 kg Part suitable for: machines Type number: 491-6082 CAT320 Pipe Caterpillar OEM : 491-6082 Article nr.: S080013007N-veiling Pipe Caterpillar Njdpfx Aexip Adof Eodc

Condition: new, Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Full Automatic or Semi-Automatic CNC bending and sawing machines Pipe size from dia. 6.0-150.0mm CNC bending, Shrinking, Sawing machinery, customerzied design available New machine stocks for sale Njdpsvl S Dgofx Af Ejdc listing price is for 2.5inch pipe type60nc bending

Condition: like new (used), Tap make ReishauerTyp 1 1/8 GG Ndedpedx Ug Ajfx Af Eec

Condition: used, New: Yes Field of application: Internal logistics Empty weight: 2 kg Part suitable for: machines Type number: 519-8289 Nodpsxipy Njfx Af Ejdc CAT320 Pipe Caterpillar OEM : 519-8289 Article nr.: S080013006N-veiling Pipe Caterpillar

Condition: good (used), Tap Reishauer 1 1/2 GGL length 120 mm Nodpfxsdx Uzls Af Esdc

Year of construction: 2022, condition: used, New: Yes Field of application: Internal logistics Empty weight: 5 kg Part suitable for: machines Type number: 559-5923 Nsdpsxipu Tsfx Af Ejdc CAT320 Pipe Caterpillar OEM : 559-5923 Article nr.: S080013010N-veiling Pipe Caterpillar

Condition: excellent (used), Tap for pipe thread Ndjdpfefhdwqox Af Eec Make May Type : R 3 3/4 inch Total length 185 mm

Year of construction: 2022, condition: used, New: Yes Field of application: Internal logistics Empty weight: 10 kg Nedjxipu Hopfx Af Eedc Part suitable for: machines Type number: 519-7107, 519-7525 CAT320 Pipe Caterpillar OEM : 519-7107, 519-7525 Article nr.: S080013005N-veiling Pipe Caterpillar

Condition: used, Taps for pipe thread Before and finished Schneider Ndsdodk Rdvjpfx Af Esc R 2 3/4 inch