Used Pev 1 4 B Od for sale (98,348)

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 02x swivel castors, new 02x brake / swivel castors, new 01x angle set, new for mounting the worktop 04x safety hook, new Bsdpohq Txwsfx Ab Todk Material color: compl. galvanized

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit Bodpfoxn N Anex Ab Tedk -Manufacturer: B&R, ACOPOS P3 servo drive -Type: 8E14X5HWT10Dimensions: 375/70/H265 mm -Weight: 3.9 kg.

Condition: used, B&R Acopos 1090 servo drive 8V1 removed from Engel robot ERC-6510-E - removed from running machine - fully functional manufacturer: B&R type: 8V1090 manufacturer no.: 8V1 spare part no.: Before purchasing, please check whether the Acopos you require also has an 12-pin green connector.  If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Bdodpfxsiyzwwo Ab Tok Dition: gebraucht

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Bdjdpfed Tbbdsx Ab Tsk The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), approx. 1500 m² 1-storey steel construction platformUsed goods, good condition, see picturesManufacturer STOWLength approx. 58.5 mWidth approx. 54.6 mHeight Lower edge 3.4 mHeight Upper edge 3.7 mUp load 500 kg/m²C-profiles and Sigma-profiles and Sigma-profiles fastenedwith screws and nutsRaster distances adjustable in lengthFloor structure is 38 mm chipboard, highly compacted, groove and tongue underside white, upper side grey coatedNegotiation price: Offer on request!Partial sale possible!disassembled and loadedWare in stock.transport costs possible on request.inspection possible at any time by appointment.further information on request.over 5000 linear metres of pallet racks from numerous manufacturers in stock. (Changes and mistakes in the technical data, data and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT ex stock) Purchase / sale We are looking for, or constantly offer numerous items from various areas broom-clean business clearance business closures quick - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with some keywords and we will get back to you as soon as possible. To get to our site, please click on our logo! Bedpfx Asd S S N Rob Todk

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Bodpohq Tqdofx Ab Tjdk Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 01x angle set, new for fixing the worktop 04x safety hook, new Material color: compl. galvanized

Condition: used, B&R 2005 CPU260 interface processor- housing intact or renewed - compatible with all B&R 2005 controllers Bedpfx Aop Rb E Reb Todk - removed from K-Tech 200 - removed from running machine - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R type: B&R 2005 manufacturer no.: 3CP26 spare part no.: 10079382 Dition: gebraucht

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: Bodjguk Dvepfx Ab Tjdk 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, B&R Acopos 1045 servo drive 8V1 removed from Engel robot ERC-6510-E - removed from running machine - fully functionalmanufacturer: B&R type: 8V1045 manufacturer no.: 8V1 spare part no.: Before purchasing, please check whether the Acopos you require also has a 12-pin green plug.  Bodpfx Absiyzw Es Todk If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: used, B&R / 8V1 Acopos 1022 servo amplifier- refurbished Bdsdep Rb Iajpfx Ab Tok - 3 months warranty: This is done exclusively by a manufacturer's inspection. The processing is carried out by Complast GmbH. - taken out of running machine - fully functionalmanufacturer: B&R type: 1022 manufacturer no.: 8V1Bitte achten Sie vor dem Kauf darauf, ob der von Ihnen benötigte Acopos ebenfalls einen 12-poligen grünen Stecker hat. If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: überholt

Condition: used, Electric motor, three-phase motor -Power: 0.45 kW -Speed: 2815 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 Bdedpoghid Nofx Ab Tek -Protection class: IP 56 -Number: 2x available -Price: per piece -Dimensions: 230/125/H120 mm -Weight: 7 kg

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed drive type: SK01-R1000-/1/L/4 -Engine power: 0.37 kW -Speed range: 33-165 rpm -Motor: adjustable -Height shaft axis: 100 mm Bsdpocfig Hefx Ab Tedk -Design: B3 -Drive shaft: Ø 20 mm -Quantity: 1 piece available -Dimensions: 505/320/H195mm -Weight: 23kg

Condition: good (used), Gear motor, electric motor Bdjdpsdwdriefx Ab Tsk -Power: 0.6 kW -Protection class: IP 22 -Price: per piece -Number: 1x available -Dimensions: 340/260/H240 mm -Weight: 7.6 kg

Condition: used, Gear motor, electric motor -Speed: 20/40 rpm -Power: 0.18/0.25 kW Bdedpec U Tx Rjfx Ab Tsk -Construction: B3 -Diameter shaft: Ø 20 mm -Length: 253 mm -Protection class: IP 33 -Number: 3x motors available -Price: per piece -Dimensions: 610/200/H175 mm -Weight: 15.4 kg

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/4"-1 1/2" inch Bdsdpfxeb A Racj Ab Tek -Weight: 14.5 kg

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/2"-3/4" inch -Weight: 4.5 kg Bdjdjb A Rabepfx Ab Tsk

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, Bsdpfx Abeb A Rlro Tjdk Tapping machine, pipe thread cutter -Inch threaded jaws: 1/4" - 1 1/2" inch -Weight: 8 kg

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter -Inch thread: 1/2" - 3/4" inch Bedpfx Ajb A Rlujb Todk -Weight: 6 kg

Condition: used, Air ratchet wrench, impact wrench, air ratchet -Square: 10 mm Bodpfx Aeb A Sx Reb Todk -Length: 400 mm -Weight: 4 kg

Condition: used, Thread cutting head with Stehler jaws, thread cutting stock Bedob A N U Rjpfx Ab Todk -Inch thread: 1/2"-3/4" -1" inch -Weight: 5 kg

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter Bdedeb A N U Nopfx Ab Tjk -Inch thread: 1/4"-1 1/2" inch -Weight: 8 kg

Condition: used, empty load weight: 15,900 kg, maximum load weight: 67,600 kg, overall weight: 83,500 kg, axle configuration: > 3 axles, first registration: 01/2008, suspension: air, tire size: -, Year of construction: 2008, Centralized lubrication 2 spare wheels 4+1 steering axles Bissel axle Convoy kit Bsdpjx Avrrsfx Ab Tsdk Detachable gooseneck Hydraulic ramps Platform length: 11.50 m Gooseneck length: 4.20 m Delivery time (in days): 1

Condition: used, Year of construction: 2018, operating hours: 1,720 h, Equipment: all wheel drive, hydraulic quick-change system, 4+1 bucket approx. 1m³, pallet fork Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this object. Bedpfx Abjvnnhae Tjdk Please contact us!

Condition: excellent (used), Gear motor Flender MBH 125CC-B 27.7/1 Bdodpfxok E Htcs Ab Tjk Helical bevel geared motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Suitable frequency inverters Walther Flender ZZ0103069.34003 Sinus Penta available Altogether 15 geared motors and 12 pieces frequency inverters available !!! Very good condition, directly from production!!!

Condition: used, Year of construction: 2018, operating hours: 6,320 h, Equipment: all wheel drive, 4+1 bucket approx. 0.8 m³, hydraulic quick-coupler system, pallet forks. The vehicle may be wrapped and/or labeled with advertising. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide you with a quote from our partner workshops! The vehicle may be wrapped and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us! Bjdpjxb Iuisfx Ab Tsdk