Used Perforator for sale (857)

Condition: used, empty load weight: 8,317 kg, maximum load weight: 27,683 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 10/2026, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2022, gearing type: mechanical, EU vehicle, unladen weight: 8,317 kg, gross vehicle weight: 36,000 kg, cargo area (L x W x H): 13,400 mm x 2,460 mm x 2,650 mm, tire size: 385/65 R22.5, cargo volume: 87 m³ Dkodpfx Acjyhrpxo Njh 1st axle: , 2nd axle: , 3rd axle: , air suspension (front and rear), underride guard, lift axle, electronic braking system (EBS), toolbox, 2x spare wheel holder, piggyback design, ferry lashings, 1x15-pin and 2x7-pin connection plugs, tire pressure monitoring system. We have 10 trailers with this specification! - HUCKEPACK (piggyback) specification with codification plate - Suitable for FERRY service (special equipment for ferry transport) - 4 pairs of ferry hold-down shackles in accordance with DIN/ISO 9367 (SKO COOL), with trestle support plates - Turning circle with raised 1st axle not achieved - Brake pad wear indicator - Tire pressure refill system (P.S.I.) - FP 2-wing rear door, insulated, NX17 foam, with double stainless steel locking mechanism - Pair of load securing rails, galvanized, recessed into side wall at standard height (13,400), floor to center of 1st securing rail: 730 mm - Pair of load securing rails, galvanized, recessed into side wall at standard height (13,400), floor to center of 2nd securing rail: 1,600 mm - 2 pairs of scuff rails, aluminum profile, 300 mm on the side walls (up to 13,400), floor to bottom of 1st wear strip: 300 mm - 2 pairs of scuff rails, aluminum profile, 300 mm on the side walls (up to 13,400), floor to bottom of 2nd wear strip: 830 mm We have 10 trailers with this specification! - Rail compatible with code plate - With ferry service special equipment - 4 pairs of ferry lashings according to DIN/ISO 9367 for SKO COOL, with trestle supports - Circular drive with lifted 1st axle not possible - Brake pad wear indicator - Tire pressure refill system (P.S.I.) - Pair of perforated load securing rails, recessed into the side wall at standard height (13,400), floor to center of 1st anchor rail: 730 mm - Pair of perforated load securing rails, recessed into the side wall at standard height (13,400) Our full vehicle range can be found at . Interested in financing? Our Value Added Services offer you customized financing options, full service, and telematics solutions. We are happy to advise you.

Condition: good (used), Year of construction: 1982, FOR SALE Heidelberg GTP is a platen press (format 34 x 46 cm) designed for hot foil stamping (Prägen) and embossing. Renowned for its double rotary arm feed system. Main technical features Dksdpex Imizofx Ac Noh Functions: Hot foil stamping, embossing, die-cutting, creasing, and perforating. Unlike the standard GT model, the GTP often lacks an inking system to prioritize pressing force. Sheet size: Maximum 340 x 460 mm; minimum 85 x 102 mm. Pressing force: Up to 60 tons, featuring a reinforced structure compared to pure printing models. Speed: Up to 4,000 sheets per hour. Weight: Approx. 2,250 – 2,300 kg. BT MACHINES PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: ready for operation (used), Year of construction: 2022, This 6-axis FRONIUS UR10 Roboter e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional specs include a 4000mm linear axis, a rotating/tilting axis with a 250kg capacity, and a torch holder. Ideal for advanced welding applications. Contact us for more information about this machine. Additional equipment • operateONE: Quick start buttons (Start / Stop / Reset / Emergency stop, Speed potentiometer, Selector switch for 2 stations operation) • slideONE: 4000 mm linear axis for Universal Robot with an effective stroke of the robot at 1600 mm • RotateTWO 250: External rotating/tilting axis for the robot with a 250 kg load capacity, including standard product with octagonal plate (16 mm perforation) and SW 600x50 table • Safety technology: 1 set of laser light barriers with steel column and 1000 mm light barriers Machine Benefits Technical Machine Benefits • Max reach: 1300 mm • Welding technology: torch holder incl. Integrated freedrivetaster, fronis cmt torch • Ergonomic holder for ur teach panel • Supports all welding positions and ensures accessibility Dksdsx D E Hujpfx Ac Noh • Floor stand for free-standing axis on two columns including leveling plates for installation • The tools shown in the pictures and the 3 cabinets are included. Extra Information Machine still under power

Condition: used, Creasing, Perforating, and Folding Machine CRF-362, used The CRF-362 from Horizon is the perfect solution for print shops that need a reliable and powerful machine for processing digital and offset prints. With its ability to perform various tasks like creasing, perforating, and folding in one pass, it optimizes the production process and saves valuable time. Key Features - Combination Function: The machine combines creasing, perforating, and folding, which simplifies the workflow and increases efficiency - Material Flexibility: It can handle material thicknesses from 100 to 350 g/m² for creasing, perforating, and folding, and up to 450 g/m² for creasing only Dedsu Tdryepfx Ac Nekh - Precise Creasing Technology: The CRF-362 offers creasing thicknesses of 0.8 mm for lighter materials and 1.3 mm for heavier materials, with optional thicknesses of 0.5 mm and 2.0 mm - Variable Crease Distances: Crease distances are adjustable from 0.1 mm in 0.1 mm increments, allowing for high precision - High Speed: The machine can process up to 4,900 sheets per hour, ensuring high productivity Specifications - Maximum Format Size: 364 x 865 mm - Minimum Format Size: 105 x 180 mm - Loading Capacity: 150 mm - Weight: 263 kg - Power Supply: 230 V, 4.2 A, 0.8 kW

Condition: used, Year of construction: 2011, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. Dkedpfsu Sr Szjx Ac Noh offer consists of: - high performance-finisher DocuCutter DC-645 Duplo DocuCutter DC-645 high performance-finisher for digital color printing: - feeder: air-suction feeder with lining up - operation: by LCD-display - control: barcode control - PC included - saveable jobs: 80 memories for repeat orders - error avoidance: ultrasonic-doublefeed control eject gate testprogram print mark reader - integrated knives: 6 lengthwise knives + 1 cross knife - size: max. 650x370mm min. 210x210mm - paper weight: 110-350g/qm - loading height: 100mm - creasing each sheet: max. 10 - production speed: max. 1500 sheets/h (A4) max. 720 sheets/h (A3) - power: 230V / 50Hz - 0,3kW - dimensions: 2.240x750x1.115mm - weight: 360kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2004, Ref:10906 . 2004 Herzog + Heymann M7 Multiple Folder. A very versatile folding machine in excellent condition. It is not only a high speed automatic B1 buckle folder for standard section and leaflet work, but also a specialist folder capable of folding maps, multiple roll folding and concertina folding. Comprising; MBO R700 'Perfection Dualfeed' round pile continuous feeder ‘Vacu-Infeed’ for mark free and smooth sheet running ‘Vacu-Alignment’ adjustable vacuum in tape roller infeed of register table Features include:- • MBO MCC Total and batch counter Djdsw Eu Igopfx Ac Nokh • Stainless steel buckle plates • Sound hoods • Frequency controlled A.C. drive motor & dual action compressor • MBO ASP 66-2 ME Presser/marker delivery unit • Complete with spares, tools & manuals. Folding sequence: 1st buckle unit - 72cm with 16 plates, perforating/scoring shafts Specification: Sheet size, Max: 72 x 104 cm (continuous feeder) Min: 15 x 20 cm Minimum fold length: 4.2 cm Speed range : 40 - 160 m/min.

Condition: new, loading space length: 5,300 mm, loading space width: 2,430 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane Roll-off container in flatbed design with aluminum side walls and permanently mounted Fassi loading crane FASSI loading crane F135AC.0.24: * 390° slewing range * All hydraulic cylinders double-acting * Hard-chrome-plated piston rods * Electronic overload cut-off device with FX500 * Emergency stop and visual alarm (90% and 100%) * Including adjustable digital slew limiter * FASSI FSC stability control including LMB II * Pressure relief and load-holding valves * Control block with 4 control valves, operable from both sides * 5th and 6th control circuits Dedpfxswikyte Ac Njkh * Oil cooler type 60/24 * Extendable on both sides, support width 4.37 m, hydraulic support * Standard color RAL 3020 traffic red - all cylinders painted black * Load hooks and mounting clamps (short / 500mm) * Driving position: folded across the direction of travel * Dead center above the outrigger beam * Joystick control for 6 functions * 1 LED work light * Outriggers can be operated remotely * 180° hydraulic Elevating support legs Roll-off container/crane container Transport platform Total length 6500 mm - According to DIN 30722 Part 1 - Internal dimensions 5300 mm (5300 mm x 2450 mm) - Crane plate 1200 x 1200 x 25 mm S355 - Pre-installed hook holder Ø50 mm - 5 mm smooth floor - U-shaped frames 80 x 50 x 4 mm, 500 mm spacing - UNP-180 end frame - Perforated side profile - Greaseable and replaceable run-off rollers, axles Ø40 mm - 25 mm aluminum side walls on the sides and rear SNAPLOCK system (height 800 mm), split in the middle - WITHOUT tarpaulin hooks - KINNEGRIP K20 stanchions (foldable/removable in the middle and rear) - Front wall height 1200mm - Primed inside and out - Exterior paint in any RAL color (stock item in RAL 9006 Silver) - Anodized aluminum profiles - Initial container inspection according to BGI 5005 Mechanical and hydraulic connections to the truck will be carried out upon request! Additional charge! We are happy to provide further information.

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,400 mm, loading space height: 900 mm, Year of construction: 2026, Equipment: ABS, 3-axle stepped semi-trailer low-loader with forced steering Ideal for precast concrete parts SAF axles 2 axles with VSE forced steering 1 lift axle Front wall Chassis in reinforced design for high point loads Hardwood floor Approach slope at the rear Suspension profile for access ramps Central lubrication system Stake pockets in the outer frame Spray-galvanized and painted outer frame Perforated outer frame Additional heavy-duty lashing points 3 pairs of work lights Extendable and illuminated extra-wide panels etc. Dsdpfxsrrtl Uj Ac Nskh Further information on request.

Condition: good (used), functionality: fully functional, overall weight: 16,000 kg, loading space length: 7,300 mm, loading space width: 2,460 mm, Year of construction: 2013, GERMAN DEALER offers: BDF swap body platform 7.45m GALVANIZED Galvanized support legs Lashing rings Perforated rail Year of manufacture: 2013 Loading area: 7300 mm x 2460 mm ##### PLEASE CALL – NO EMAILS! DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO-COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! VIEWING BY APPOINTMENT ONLY! ##### Dkodeyhhzkopfx Ac Nsh

Condition: good (used), overall weight: 16,000 kg, loading space length: 7,700 mm, loading space width: 2,480 mm, Year of construction: 2017, GERMAN DEALER offers: Jumbo BDF platform swap body 7.82 m high front wall perforated rail crane-compatible low frame 16,000 kg GVW year of manufacture: 2017 7700 mm x 2480 mm swap body only – trailer available separately Many swap bodies and dollies in stock! ##### PLEASE CALL – NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES – SUPPLYING SINCE 1983! VIEWING BY APPOINTMENT ONLY! ##### Dedpfx Acjyhd Ume Njkh

Condition: used, Year of construction: 2014, Horizon Folding Machine AF-566-F with GFB-56 Gatefold Buckle and LCV-54 Delivery 2nd unit:Stahl 2T 52.3T, Baujahr 1997 Technical data: Format Max.: 558x850 mm (1,100 mm*) Format Min.:128x148 mm (105x148 mm*) Maximum fold length: 450 mm Minimum fold length: 35 mm (58 mm in pocket 1) Paper weight: 40 – 250 g/m² Output: max. 240 m/min, 50,000 cycles/h Feeder stack height: 740 mm Special Equipment: Hubs for the cutting unit, each with 2 perforation tools and 2 cutting knives Very good condition Dodeyftwlopfx Ac Njkh Available at short notice

Condition: good (used), The scope of delivery includes: 01x End upright extension, used Shelving system: Bito Type: PRO Material color: sendz. galvanized Frame profile: P5 Profile dimensions: 120 x 76 x 2.25 mm Grid perforation: 50|50 mm Height: 500 mm + extension bracket Depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Dkjdpfxjyfq Hwo Ac Noh This item is offered for collection only. If transport or shipping of this item is desired, additional costs will apply; these can be requested from us depending on the place of delivery and scope of supply.

Condition: used, Year of construction: 2020, CYKLOS TriFold 360 Folding Machine?for connection to creasing machines (e.g. AirSpeed 450 or others) The CYKLOS TriFold 360 folding machine can be linked to the automatic creasing and perforating machine CYKLOS GPM 450 Speed or CYKLOS AirSpeed 450 (or other comparable creasing machines) to operate as a fully automatic creasing and folding system. Folding is achieved through the combination of manually adjustable fold plates and large-diameter rubber rollers – a simple and cost-effective yet revolutionary solution. All parameters can be adjusted according to the specific application and the speed of the creasing machine.? Special Features - easy connection to CYKLOS creasing and perforating machines AirSpeed 450 or GPM 450 Speed possible? - connection to a wide range of creasing machines from various manufacturers possible? - fold plate adjustment is manual? - standard fold types marked on fold plates: single fold, letter fold, zigzag fold, gate fold, parallel fold? Technical Details - paper weight: 100 – 350 g/m²? - paper size: max. 620 x 360 mm? - folding speed: up to 6,000 sheets/hour (depending on the speed of the creasing and perforating machine)? - easy operation and adjustment of feed, folding and delivery speed as well as suction air?transport table: L620 x W360 mm? - 2 interchangeable lower fold plates for different paper weights? - mobile stand with castors for easy handling - connection: 230 V / 50 Hz? - dimensions: L 1635 x W 565 x H 1310 mm? - weight (net): 113 kg Dsdpfx Asxr Ah Soc Nskh All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, mileage: 37,887 km, power: 382 kW (519.37 HP), first registration: 02/2025, fuel type: diesel, overall weight: 26 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, Full and emergency braking assistant, ACC Stop&Go, lane departure warning, turn assist, LED: rear, daytime running, outline, indicator, and all-round warning lights, work lights, reverse warning device, steel rear bumper, reversing camera, airbag, multifunction steering wheel, MAN Easy-Control, sun visor, air pressure gun, 7" media system, hydraulic internal locking, semi-moon shaped rear tipper frame lock, galvanized perforated sheet mesh basket, hydraulically adjustable underride guard (semi-automatic), automatic sequence control (AUSC), for container internal dimensions 5,000 to 6,750 mm, 2 LED work lights at end of frame, engine-side PTO (power take-off). Dksdpsxa Szdefx Ac Njh

Condition: used, maximum load weight: 29,280 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2012, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2012, Equipment: ABS, SDP 27, LASI EN 12642 Code XL, disc brake Construction inside / outside: * Sliding tarpaulin left + right Dsdpjyg Ti Rjfx Ac Nskh * Quick release at the front * Sliding roof * Load securing certificate EN 12642 Code XL * Internal height at the front approx. 2,650 mm * Internal height at the rear approx. 2,740 mm * Perforated outer frame (Multilock) * Pallet stop left + right * Screen-printed floor for 7,100 kg forklift axle load * 28 aluminum insert slats * 3 pairs of sliding stanchions, movable * Rear portal doors with double locks * Access ladder * Storage box * Reversing light * Rear fog light Chassis / other equipment: SAF Intradisc axles * Disc brake 430 mm * Lift axle * Air suspension * Raising and lowering * ABS, EBS * Tires 385/65 R 22.5 on ET 120 * Remaining profile approx. 6 - 10 mm * Spare wheel holder ---- Offer subject to change from the Bocholt location, subject to prior sale and errors. Sale only to businesses or export.

Condition: used, maximum load weight: 28,982 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2013, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, SCS 24/L-13.62 EB, LASI EN 12642 Code XL, disc brake, pallet box, lifting axle Construction inside / outside: Dksdoyg Ti Dopfx Ac Nsh * Sliding tarpaulin left + right * Sliding roof * Load securing certificate EN 12642 Code XL * Inside height: approx. 2,760 mm * Perforated outer frame (Multilock) * 13 pairs of lashing eyes * Swedish stanchions * Screen-printed floor for 7,100 kg forklift axle load * 22 aluminum insert slats * 3 pairs of sliding stanchions, movable * Rear portal doors with double locks * Access ladder * Reversing light * Rear fog light * Anodized bulkhead and rear doors Chassis / other equipment: SAF Intradisc axles * Disc brake 430 mm * Galvanized chassis * Pallet box * Tool box * Spare wheel holder * Air suspension * Lift axle * Raise and lower * ABS, EBS * Tires 385/65 R 22.5 on ET 120 ---- Offer subject to change from the Bocholt location, subject to prior sale and errors. Sale only to traders or export.

Condition: used, maximum load weight: 31,234 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2012, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2012, Equipment: ABS, SCS 24/L-13.62 CEB, LASI EN 12642 Code XL Coil tray 9,000 mm German vehicle Construction inside / outside: * Sliding tarpaulin left + right * Sliding roof * Ice roof (pneumatic) * Load securing certificate EN 12642 Code XL * Interior height: approx. 2,760 mm * Perforated outer frame (Multilock) * 15 pairs of lashing eyes * Screen-printed floor for 7,100 kg forklift axle load * 20 aluminum insert slats Dksdpfxeyg Tkbe Ac Neh * 3 pairs of sliding stanchions, movable * Rear portal doors with double locks * Access ladder * Reversing light * Rear fog light * Anodized bulkhead and rear doors Chassis / other equipment: SAF Intradisc axles (disc brake 430 mm) * Lift axle * Galvanized chassis * Coil tub 9 m * Swedish stanchions * 2 x storage box * Air suspension * Raise and lower * ABS, EBS * Tires 385/65 R 22.5 ET 120 * Remaining profile 6-14 mm ---- Offer subject to change from the Bocholt location, subject to prior sale and errors. Sale only to traders or export.

Condition: used, maximum load weight: 13,190 kg, overall weight: 16,000 kg, first registration: 12/2020, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,520 mm, loading space volume: 46 m³, Year of construction: 2020, Krone WK 7.3 WK7.3ST Steel Swap Body Box VIN: W0957476 Body: * Steel box body with perforated walls * EN12642 Code XL certification * Dimensions (LxWxH): 7.30m x 2.48m x 2.52m * Volume: 46 m³ Weights: * Gross weight: 16,000 kg * Payload: 13,190 kg * Unladen weight: 2,810 kg Other information: * German vehicle * Excellent condition New general inspections, safety checks, or weight downgrades/upgrades can be arranged upon request. We are happy to assist with the procurement of export/temporary registration plates and with transporting your purchased vehicles within Germany. Please contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to changes, prior sale, and errors. Djdpfx Asyg Tcdsc Nekh ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On our 11,000 sqm premises you will find a large selection of vehicles. Our company philosophy is characterized by fairness and professionalism. As customer satisfaction is very important to us, we offer our customers an all-inclusive service package and provide a dedicated contact person to support them throughout the purchasing or selling process. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to help you organize special transport services. Short-term/export registration plates We are happy to assist you with obtaining export or short-term license plates. Completion of customs formalities We are happy to help you with customs clearance procedures.

Condition: used, Year of construction: 2000, This Heidelberg SM 52-2 is a robust two-color straight printing press, designed for high-quality sheetfed offset production. Built in 2000, it features a 370 x 520 mm format and has accumulated approximately 78 million impressions, reflecting its reliability and extensive use. The machine is equipped with advanced technologies to streamline workflow and enhance print quality. It includes the Alcolor automatic film dampening system for consistent ink-water balance, and the Autoplate semi-automatic plate change system for efficient job changeovers. The Cptronic control system and chromed cylinders ensure precision and durability, while the integrated blanket and ink-roller wash-up devices simplify maintenance and reduce downtime. Additional features include a powder spray and cooling unit for optimal print conditions, as well as a numbering and perforating unit complete with two cams, wheels, and multiple numerators???ideal for security printing or serial numbering tasks. Located in Germany, this press is ready to deliver high-performance results for a variety of printing applications. Format: 370 x 520 mm Equipment: Two colours Straight machine Alcolor Automatic film dampening Autoplate: semi-automatic plate change system Cptronic , Chromed cylinders Blankets wash-up device - Wash device for impression Ink-rollers wash device managed from console Powder spray, Cooling unit Numbering and perforating unit complete with 2 cams and wheels and many numerators Dkodexizdtspfx Ac Njh

Condition: used, The Horizon AFC-502 folding machine, serial number 23027, is a versatile solution for professional folding applications. Currently dismantled and located in Germany, it is designed to handle a wide range of formats with precision and efficiency. This model offers 2 parallel folds and 1 cross fold, supported by a suction head with rotary feeder for smooth and reliable sheet handling. It accommodates sheet widths up to 500 mm (minimum 105 mm) and lengths up to 648 mm (minimum 174 mm). Cross folding is possible from 182 mm to 500 mm, while perforation can be performed on sheets ranging from 105 mm to 500 mm in width. Performance highlights: Folding capacity: 2 parallel folds + 1 cross fold Sheet width: 105 ??? 500 mm Dodpjw U Dtvofx Ac Njkh Sheet length: 174 ??? 648 mm Cross folding: 182 ??? 500 mm Perforation width: 105 ??? 500 mm Speed: up to 180 m/min Compact and efficient, the Horizon AFC-502 is well-suited for printshops requiring reliable folding performance across a variety of formats. Format: 500 mm Equipment: 2 parallel fold 1 cross fold Sheet width: max: 500mm,min: 105mm, Cross folding: max: 500mm, min: 182mm, Perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min.174mm. Speed max. 180 m/min., suction head w ith a rotary feeder

Condition: used, Year of construction: 1996, Drent Type Gazelle S 316 Year of manufacture: 1996 1 x Paper unwind for max. 120 cm roll diameter - Max. paper width: 500 mm - Max. printing width: 480 mm - Core diameter: 70 mm - Paper weights: 40 - 150 g/m² 2 x pneumatic expanding shafts for 70 mm core diameter at unwinding 1 x pneumatic expanding shaft for 70 mm core diameter at rewinding 1 x web edge control device with remote adjustment 9 x damp offset printing units with alcohol dampening systems in 16 2/3", 24" and 25" Printing modes: 9/0, 8/1, 7/2, 6/3, and 5/4 color Straight web run production with end dryer. 4 turn bars in print units 1-4 9 x damp offset printing modules, 25" cylinder circumference UV drying: 1x2 end dryer + 1x3 end dryer, variable use GKW ink roller temperature control per printing unit TOOL GROUP: - 1 x stepping device - 1 x filing hole punch - 1 x 25" filing hole insert with 2 pairs of tools for top and side filing holes at 4 / 6 / 8 and 12 inch - Remaliner punching station - Trimming device, shear cut with 2 pairs of knives - Longitudinal perforation with pneumatic knife holders - Cross-cut cylinder, 16 2/3 inch circumference - Cross-perforation cylinder, 25 inch circumference - GAP Master punching unit, 25 inch magnetic cylinder, gap size 0.48 mm Dsdpfx Aoyfgatjc Njkh - Rewinder for 1200 mm roll diameter - BST web video camera for web observation, front and rear sides - Max. running speed: 250 m/min roll/sheet; 250 m/min roll/roll - Max. production speed: 250 m/min roll/sheet; 250 m/min roll/roll INTERCHANGEABLE UNITS 24 inch - 9 x damp offset printing module, 24 inch cylinder circumference - 1 x GAP Master magnetic punching unit, 24 inch, gap size 0.48 mm - 1 x cross-cut cylinder, 16 2/3 inch circumference with 7.8 mm waste cut - 1 x 20 inch filing hole insert with 1 pair of tools for 6 2/3 inch filing holes - 9 x damp offset printing modules, 16 2/3 inch GAZELLE SINGLE SHEET DELIVERY DIN formats delivery: DIN A3 / DIN A4 / DIN A5 with separating cut via cutting cylinder A waste cut is also possible. Thus, formats such as A4 and A5 are possible. Inch formats delivery: 24 inch, 12 inch, 8 inch 25 inch, 12 1/2 inch, 8 1/3 inch Max. width for single sheet delivery: 480 mm Max. speed for single sheet delivery: 150 m/min Max. grammage: 120 g/m² *All information provided without guarantee!

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Dkjdpod Hkqhsfx Ac Njh Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine now available (ex-works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 cbm, Hydraulically operated pusher Screen perforation of your choice (12 - 40mm) Extraction socket Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Additional row of knives + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for the conveyor belt and overband magnet + €2,750 net Djdpfx Asd E R D Soc Nokh (start and stop synchronized with the shredder) - Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation) Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. increase wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net Dedpfxsdwktks Ac Nokh - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Benefits: + Special rotor with reduced knife protrusion, suitable for hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour *Rate depends on screen size and material. Significantly higher throughput with smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or according to agreement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Suction connection Ø 200 mm Dkodpfxsx Af Rdj Ac Neh Feed opening: 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: plant color may differ Weight: 1920 kg Standard scope of delivery includes: - Control cabinet with PLC control - Automatic star-delta start - High-speed hydraulics - Auto shut-off when rotor is idle - Speed 70–90 rpm for high throughput - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at an additional cost: - Increase shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synced with shredder) - Enlarged hopper attachment 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Feed must be free from metals and mineral contaminants. Tool damage and/or increased wear may result otherwise.