Used Perforator for sale (902)

Year of construction: 1998, condition: good (used), functionality: fully functional, Nilpeter Model: F3000 Machine No.: F-2002 Year of manufacture: Approx. 1994–1998 Please note: The exact year cannot currently be confirmed due to a damaged machine identification plate. Printing process: Flexographic printing + Screen printing Flexographic printing units: 5 Screen-printing units: 2 Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 5 flexographic printing units • 2 screen-printing units • Combination of flexographic and screen printing within one production line • Suitable for standard as well as specialty label applications • Possibility to apply high-opacity inks, whites, and special effects through the screen-printing units _____ Drying System • 5 UV drying units • 5 hot-air drying units • Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements • Flexible drying configuration for different materials and coating applications _____ Web Handling • Unwinding section • Web transport through the complete production line • Turnbar system • Delamination / relamination system • Suitable for reverse-side printing and multilayer label applications • Stable web handling throughout the production process _____ Laminating Section • Integrated laminating unit • Suitable for protective lamination • Suitable for multilayer label structures Iiedpfxeztqrne Ahyeh • Allows inline finishing without the need for a separate laminating machine _____ DIE-CUTTING AND CONVERTING The machine is equipped with an extensive converting section: • 3 rotary die-cutting stations • 1 additional die-cutting station for sheet delivery • Integrated sheet delivery • Suitable for multiple cutting, perforating, and converting operations • Flexible configuration for different label and converting applications _____ SHEET DELIVERY • Integrated sheet delivery system • Additional die-cutting station dedicated to sheet production • Enables the machine to produce both roll-to-roll and roll-to-sheet products • Additional flexibility for specialty applications _____ INCLUDED ACCESSORIES The machine is supplied with a considerable quantity of production tooling and accessories. Magnetic Cylinders • 10 magnetic cylinders Anilox Rollers • 21 anilox rollers Printing and Rubber Rollers • 5 rubber rollers • 10 printing rollers Additional Tooling • Various additional cylinders • 1 new slitting cylinder • Further tooling available with the machine The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation. _____

Condition: used, functionality: fully functional, mileage: 22,000 km, power: 405 kW (550.65 HP), gearing type: automatic, fuel type: diesel, color: black, axle configuration: 6x2, first registration: 07/2024, emission class: euro6, Year of construction: 2024, operating hours: 680 h, Equipment: ABS, air conditioning, parking heater, traction control, Available from January 1, 2027. Used suction dredger directly from the manufacturer - for sale or rent. Are you looking for a used suction dredger that is readily available, technically reliable, and economically attractive? At MTS, you will find used suction dredgers directly from the manufacturer - professionally inspected, technically and visually refurbished, and ready for its next assignment. Currently available: MTS DINO VARIO 8 m³ - SB 1612 on Volvo FH 6 x 2 Suction unit: Proven quality directly from the manufacturer 6-month warranty 1 year / 500 operating hours maintenance-free Fan operating hours: 652 h Iijdpfx Ahszvw U Uoyjh Compressor operating hours: 670 h Standard equipment MTS suction unit MTS double fan MTS material separation system (patented) Automatic filter cleaning, air compressor 4.5 m³/min, 8 bar POWERARM with 7m suction hose 3 stabilization supports PLC control with remote diagnostics capability Wireless remote control (brand: Gross Funk) Storage option Special module options Container & lid, stainless steel lining Stainless steel toolboxes EVO-POWER ARM Rotating suction pipe system IKE/PERFOR Suction, drive & steer HYDROSTAT Electric steering Volvo Full cladding DESIGN High-tipping system HIGH-TIP with 4 supports (2+2) High-pressure water system 30 l/min Vibrators on the suction hose Industrial equipment Industrial package II: gas sensor Variable speed control, fan Filtration unit, oil circuit Environmental equipment Hydraulic oil, biodegradable Noise reduction package: sound insulation, container exterior Accessories - Module Container with 2 pneumatic vibrators Access ladder, engine house (2x) Ladder under the hose rack Accessories - Lighting Light package II: 2 LED lights on the center joint of the POWERARM Light package III: LED light strips in the toolbox Light package V: LED lights next to the POWERARM shaft Light package VII: Fire brigade lighting 2x Light package VIII: Light bar at the rear Accessories - Safety 4 flashing beacons Anti-slip coating Accessories - Filter system Filter cleaning with pneumatic vibrator Accessories - Tools Vogt pneumatic shovel Atlas Copco 20 KG hammer Air lance The used car general terms and conditions of MTS GmbH apply, which can be found at: saugbagger.com/allgemeine-geschaeftsbedingungen Errors and prior sale excepted. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 590 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 66,000 mm, loading space width: 24,800 mm, loading space height: 10,000 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Rear work light - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO (Power Take-Off) - Radio/Multimedia system - Rear view camera - Disc brakes - Sleeper cab - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 6-026 IMMEDIATELY AVAILABLE -> Model and year of manufacture 2026 MAN TGX 26.480 6x2-4 Air / Air as a dump truck with loading crane PALFINGER PK 22002 EH or FASSI F235, each with 4 or 6 outriggers Vehicle: Diesel engine MAN D26, 480 hp, Euro 6e Automatic transmission MAN TipMatic 12.26 DD with retarder 35 Retarder Eco, speed-dependent, adjustable, energy-efficient High-performance engine brake MAN EVBec, adjustable Disc brakes, protected, for off-road use Drive 6x2-4 Suspension type Air / Air (LL) 4,800 mm main wheelbase, 1,350 mm wheelbase between rear axle and trailing axle Iiedoz Hkdnepfx Ahyoh 590 l fuel tank capacity, 60 l AdBlue tank capacity Trailing axle steered and liftable Trailer coupling RINGFEDER Type 4040/G150B, ø 40 mm drawbar pin -> Optional ø 50mm also possible Cab GM: the spacious one (wide, long, medium height) Comfort mattress, lower, 110 mm Pull-out refrigerator and drawer Driver's comfort seat, air-suspended, with lumbar support and shoulder adjustment Glass sunroof, electric LED lighting MAN Media System Navigation Professional 12.3 inches MAN Sound System Advanced with subwoofer GSR equipment (rear view camera, turning assistant, tire pressure monitoring, Alco Lock preparation, etc.) Body: Dump bed: Dimensions 6,600 x 2,480 x 1,000 mm Side walls 1x divided (2 flaps) per side, with side wall release Substructure: Steel construction, KTL + powder coating and/or hot-dip galvanized Perforated frame for good load securing Center lashing bar Toolbox Support leg pads including bracket Cranes: Fassi F235 loading crane: Load capacity at 12.7 m still 1,345 kg or 17.1 m at 740 kg Slewing range 400° Double knuckle system with PROLINK (over-extension of the knuckle arm up to 15°) Electronic overload cut-off system with FX500 Fassi RCS Funk maxi - 6 functions » with 3 joysticks (2-2-2) Emergency stop, as well as optical alarm (90% and 100%) incl. digital slewing limit adjustable FASSI stability control FSC incl. LMB II Control system for 2 additional functions with »2 hose guides / e-dynamic With 4-section and 6-section extension on stock alternatively: PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE -Lifting moment: 205.0 kNm (20.9 mt) -Classification HC1 HD4/B3 according to EN12999 -Fast extension system with oil return and internal oil passage -Double knuckle with Power Link Plus 15° -Slewing mechanism with slewing cylinders -Slewing range 400° -Electronic HPLS -...

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 004/2017, The line (multi-purpose automatic machine) is designed for the automatic straightening and cutting of uncoiled flat and metal strip and coil into sheets of various dimensions, with a simultaneous stacking system. The machine was manufactured in Poland in 2017. Main technical and operational parameters of the line: 1. Overall external dimensions of the entire line: total length – 1230 cm, maximum height – 180/260 cm, maximum width – 320 cm, 2. Length/width/height: receiving table – 400 cm, 130 cm, 87 cm; feeding table – 400 cm, 150 cm, 87 cm. 3. Power supply: electrical 3 x 400V/50Hz 4. Flat sheet parameters – thickness 0.5 mm – 2.0 mm / width – max 1500 mm, Iiodpfoz Eafxox Ahyoh perforated sheet parameters – thickness up to 3 mm, width – max 1500 mm. 5. Uncoiling, straightening, and cutting speed – automatically controlled. 6. Max. Load – 5000 kg (5T) [spindle carriage]. Machine construction: 1. Rail carriage, 2. Coil unwinder – for strip and coil, 3. Straightener with adjustable straightening gap, 4. Guillotine shears – for transverse cutting of the strip into sheets, 5. Stacker (trap) for preliminary collection of sheet metal, 6. Wheel-and-spindle carriage for packaging sheet metal, 7. Control cabinet – integrated electrical and electronic systems for power supply, programming, and control. 8. Adjustable control panel with a visual touch screen. 9. Safety devices – guards, emergency stop switches, wire circuit with limit switch, distinctive colors. The construction of the machines that make up the line is based on a monolithic, compact frame and table structure made of steel profiles, angles, closed profiles, flat bars, bracing, and sheet metal cladding. The components are joined by longitudinal, butt, and lap welding, as well as by detachable bolted connections. The machine has been used very little (a few dozen operating hours) due to a change in production plans. It is in perfect condition. The stated price is the net price.

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Iiodpoz Dta Tsfx Ahyjh Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Iijdpfoz Dtbkjx Ahyeh Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Condition: used, maximum load weight: 13,250 kg, overall weight: 16,000 kg, first registration: 01/2017, loading space length: 7,720 mm, loading space width: 2,480 mm, loading space height: 2,995 mm, loading space volume: 57 m³, total length: 7,820 mm, total width: 2,550 mm, total height: 3,150 mm, Year of construction: 2017, Vehicle No. G0123114_SAMPLE – Manufacturer: WECON. Iedpez A Rm Isfx Ahyeih * Simple corner fittings * Outline marking on side/rear * Load certificate Code-XL * Mechanical lift-up roof * Portal door with double rotating bar locks (inside) * Forklift accessible * Telescopic support legs * Device for rail loading * Lashing recesses * Lashing options * Perforated pallet stop rail LASI CODE XL!!!. Delivery time upon request. Tarp used. Steel insert slats with integrated combination lashing rail (slot/hole). Technically ready for use without further repairs. Substructure galvanized. Valid UVV certification. UVV documents available. Isolated paint chipping on components of the interchangeable body. Deformations/stops on components – see pictures. Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details upon request by phone or email.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012535, empty load weight: 3,860 kg, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2026, next inspection (TÜV): 06/2027, loading space length: 7,750 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: silver, Year of construction: 2026, Demonstration vehicle - Please note: images shown are archive photos. The vehicle may currently be in use! #Chassis – centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly angled, new design, featuring a "Load Lock" profile for lashing strap attachment - 1 pair of geared landing legs front, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 1 pair of geared landing legs rear, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 2 wheel chocks with holder - Side impact protection, aluminium - Underrun protection, steel - Quarter-shell mudguards - 2 plastic tool boxes with drawer and insert shelf, w=650 / h=520 / d=670 mm, lockable with a padlock #Towing gear – centre-axle trailer - Drawbar with certified 50 mm towing eye, general haulage version - Lower coupling head on drawbar - Folding bracket with spring support on drawbar, guiding the connecting cables to the truck #Axles + suspension - SAF disc-brake axles, 430 mm disc diameter - "Axles/chassis laser-measured" reducing tyre wear and fuel consumption - Air suspension with lift & lower valve #Wheels and tyres - 385/65 R 22.5", manufacturer's choice Ijdpfxjzw Ep No Ahysih - Steel rims, factory silver #Braking system - Two-line compressed-air braking system - Spring-loaded parking brake - Vehicle stability system - Duomatic connection front, with connecting line to towing vehicle, direction of travel right - EBS electronic braking system, EBS connector front with connecting cable #Electrics - 24V multi-chamber LED lights, yellow LED side marker lights, LED number plate light (note: false fault warnings possible with certain towing vehicles despite correct function) - 2 white position lights front - 2 white/red outline marker lights rear - 1x 15-pin plug front with connecting cable, direction of travel right - Reversing camera system, colour flat-screen monitor, wireless link, screen with suction-cup mount, powered via 24V vehicle socket #Floor - Phenolic-coated plywood, approx. 30 mm, high point-load capacity - Note: floor warping possible due to weather - "Premium floor sealing", sealed all round - Platform length approx. 7,750 mm #Front wall / front corner posts - 25 mm aluminium hollow-section, 1,950 mm high, corner posts steel, reinforced profile, +2 additional centre supports - Front wall internally lined with 1,250 mm high phenolic-coated plywood #Centre stakes - 2 pairs of folding stakes at side-board height, foldable and removable #Side boards - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, without tarpaulin rail #Rear wall / rear corner posts - 1 pair of folding stakes at side-board height, foldable and removable - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, with internal folding step #Country of registration / plates - Warning plate ECE-70 - Warning plate "A" for waste transport, foldable - ADR warning plate at rear, foldable #Paint finish - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation"

Condition: used, Workshop Equipment Set – Mobile Assembly Table & Steel Storage Cabinet Used workshop equipment offered as a set for equipping an assembly, maintenance, or production workspace. The set includes: Large mobile assembly table – 1 pc • Dimensions: 2050 × 2030 × 665 mm • Perforated work surface • Sturdy metal frame with casters • Suitable for assembly work and handling large components • Reference: 48784-131 Steel storage cabinet – 1 pc • Dimensions: 500 × 500 × 1730 mm • Open-front design with two shelves and three storage compartments • Suitable for storing tools, parts, and workshop supplies • Reference: 48457-234/1 Professional work tables with metal frames – 2 pcs Internal code: 48784-234 Large, sturdy work tables with durable metal frames, spacious work surfaces, and lower storage shelves Dimensions: 1500 × 1000 × 950 mm Professional work tables – two sizes Code 48784-227 · 1500 × 1000 × 940 mm Code 48784-227/1 · 1500 × 750 × 900 mm Work tables – three sizes Code 48784-201 · 2000 × 900 × 900 mm - 1 pc Code 48784-201/1 · 1500 × 900 × 900 mm - 2 pcs Code 48784-201/2 · 1500 × 750 × 900 mm - 1 pc Professional work tables – 4 pcs Dimensions: 1500 × 1000 × 950 mm Ijdpfx Ahsz Hmbcoyoih Internal code: 48784-176 A practical combination of a large work surface and organized storage for a single workshop area. Condition: used; please see photographs. Location: Latvia. Price for the complete set: upon request. Prices exclude VAT. Please contact us for further information or to arrange a viewing.

Condition: used, machine/vehicle number: 9394, Year of manufacture: 2015 Technical Data: Main dimensions (length/height/width): 1430/1730/780 mm Discharge opening diameter: 102 mm Number of knives and blades: 3+1+9 Drive: 22 kW Total machine weight: approx. 400 kg Possible screen perforations: Ø 4–25 mm Iodpfx Ajyr Tlishyeih

Year of construction: 2026, condition: new, functionality: fully functional, power: 0.7 kW (0.95 HP), overall weight: 621 kg, total length: 1,306 mm, total width: 1,876 mm, total height: 2,112 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO VS COMPACT vibration screen delivers efficient material separation for recycling, construction, landscaping, agriculture, and biomass processing. Customers benefit from high throughput, flexible setup, and compact mobility, making it ideal for soil screening, gravel screening, wood chips, compost, waste materials, and recycling applications. Key Features: Isdewyl Ugopfx Ahyoih - Compact, foldable semi-mobile design for space-saving transport and setup - Two powerful vibration motors for reliable high-performance screening - Adjustable screen angle and quick-change screens (perforated, grid, bar) - Modular expansion with conveyor belts and funnel plate for up to 3 fractions - User-friendly operation with 400V connection compatibility Tech Highlights: W 1.88 m · L 1.31 m · H 2.11 m · Loading height 1.76 m · Screen area 3 m² · Qmax 30 t/h · Power 2 × 0.35 kW (400 V) · Max bucket width 1.65 m · Weight 621 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, roll diameter: 50 mm, roll width: 310 mm, power: 0.37 kW (0.50 HP), input voltage: 380 V, type of input current: three-phase, overall weight: 120 kg, Manufacturer: KNAPP Track width: 315mm / total width: 385 mm Roller width: 310mm Roller material: Steel Roller diameter 50 mm Bearing steel rollers Powder-coated, perforated steel frame Inner curve length: 1400 mm Ijdowynwdopfx Ahysih Outer curve length: 2450 mm Inner track distance: 625 mm Total diameter: 1380 mm SEW Eurodrive drive. Power: 0.25kW, speed: 39m/min

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Iijdpfxjyfvwbo Ahysh Contact Tobias Ebert for further information.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Isdpfx Ajzf Nk Tohyeih Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: good (used), Extrusion tool accessories, extruder -Manufacturer: JC Times USEON, Extrusion Tooling Accessories Iijdpfozpwcxjx Ahysh -Type: unfortunately without type designations -Perforated plates: 3 pieces 1940/210/H60 mm -Individual components: see photos -Price/Fee: complete -Transport dimensions: 3150/1095/H1790 mm / 2050/300/H900 mm -Weight: 2510 kg / 560 kg

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Knife Granulator PC42100R – 45 kW – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are the official representative of 3E Machinery in Poland. We offer new and used shredders, knife granulators, and complete recycling systems. We offer a new industrial knife granulator, 3E Machinery PC42100R, equipped with a powerful 45 kW main motor and a 1,000 mm wide rotor. The PC42100R is designed for efficient size reduction and granulation of various types of plastic and other recyclable materials. Its robust construction and specially designed cutting system ensure high efficiency, stable operation, and a uniform final fraction. TECHNICAL SPECIFICATIONS: Model: PC42100R Type: Industrial knife granulator / cutting mill Main motor power: 45 kW Rotor length: 1,000 mm Rotor diameter: 420 mm Cutting chamber: 1,034 × 540 mm Moving knives – V arrangement: 3 × 2 / 5 × 2 pcs. Moving knives – S arrangement: 3 × 10 / 5 × 10 pcs. Fixed knives: 2 × 2 pcs. Standard screen perforation: 12 mm Machine dimensions (L × W × H): 1,770 × 1,842 × 2,425 mm Machine weight: approx. 3,230 kg Condition: Brand new The PC42100R is also available in a 55 kW motor version, depending on the customer's requirements and processed material. APPLICATIONS: The PC42100R knife granulator is suitable for processing various recyclable materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, injection molding waste, plastic pipes and profiles, plastic crates and containers, sheets and technical plastics, pre-shredded cable waste, various production and industrial plastic waste. The machine can operate as an independent granulator or as part of a complete recycling line. Iijdpsznbv Hsfx Ahyoh For larger or bulkier materials, we recommend combining the PC42100R with a single-shaft shredder with a hydraulic pusher, which performs the first shredding stage. The pre-shredded material is then transferred to the PC42100R for final granulation. GrabTrade offers complete systems consisting of a pre-shredder, knife granulator, material transport system, and Big-Bag collection station. MAIN ADVANTAGES: Powerful 45 kW drive Heavy-duty industrial construction 1,000 mm wide cutting rotor Large 1,034 × 540 mm cutting chamber Efficient V-type cutting system Replaceable screen for controlling the final material fraction Suitable for continuous industrial operation Can be integrated with shredders and complete recycling lines Possibility of pneumatic material transport to a Big-Bag station Professional technical support and spare parts availability Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts, including knives and screens. Full range of our knife granulators, shredders, and complete recycling systems: GrabTrade – shredding and recycling machines.

Condition: used, Year of construction: 2021, Overview This SPEIDEL Braumeister 500 is a compact single-vessel electric brewhouse with 500 L (5 hL) batch volume, built in 2021 by Speidel Tank- und Behälterbau GmbH (Ofterdingen, Germany). Mashing, lautering and wort boiling take place in one stainless-steel kettle: the removable malt pipe with perforated base screens and filter cloth holds the grain bed, while the integrated 18.4 kW electric heating elements and wort circulation manage the temperature steps. The brewhouse produced beer at a craft brewery in France until November 2025. It is dismantled, stored and immediately available. Technical data - Manufacturer: SPEIDEL Tank- und Behälterbau GmbH (Ofterdingen, Germany) - Model: Braumeister 500 (Art. no. 46500) - Year of manufacture: 2021 - Machine type: single-vessel electric brewhouse (malt pipe system) - Batch volume: 500 L (5 hL) - Heating power: 18.4 kW (electric) - Power supply: 400 V, 3-phase, 50/60 Hz - Protection class: IP 43 - Application: beer - Dimensions: approx. 120 x 126 x H 150 cm - Weight: approx. 377 kg Equipment Isdpfsznd Ewsx Ahyjih - Removable malt pipe with perforated base screens and filter cloth - Stainless-steel lid - Integrated electric heating elements and wort circulation Condition Used - in beer production until November 2025, last maintenance November 2025. The machine is dismantled and stored. Availability Immediately. Location: France. Handling and truck loading are included (EXW loaded). The machine can be visited on request.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, load capacity: 800 kg, - Stationary scissor lift table with single scissors Iedpfx Asxazzyjhysih - Steel perforated grid plate System 16 - Platform size: 2000x1000x100 mm - Hole spacing: 50 mm - Hole diameter: 16 mm - 360-degree rotary platform beneath the grid plate - Grid system with 4 stops every 90 degrees - Lift up/down operated by a hand control with 3 m cable - Battery-hydraulic drive - Load capacity: 700 kg - Construction height: 670 +/- 60 mm - Useful lift: 700 mm - Maximum height: 1370 +/- 60 mm - Own weight: approx. 810 kg - Stationary version with 4 base plates.

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 39,000 kg, rotor length: 3,200 mm, power: 320 kW (435.08 HP), rotational speed (max.): 58 rpm, input voltage: 400 V, Completely Overhauled Machine: Delivery time: November 20, 2026 Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without large contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2 x 160 kW (ABB) Screen perforation: Screen holes 148 mm Control cabinet: complete with (frequency converter - ABB) Cooling system: included Working opening: 3190 x 1750 mm Filling volume: approx. 8 m3 Rotor length: 3190 mm Iiedowkilwspfx Ahyoh Rotor diameter: 745 mm Rotor speed: 50Hz: 58 rpm Number of rotor knives: 36 pieces Knife dimensions, cutting knives: 145 x 145 mm Counter knives at the bottom: 9 pieces Stripper comb at the top: 9 pieces Feed system, hydraulic: 11 kW Total weight: approx. 39 t Dimensions L x W x H mm: 6250 x 3260 x 3090 mm Hopper: included Delivery time: November 20, 2026

Year of construction: 2025, condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 600 kg, total length: 2,425 mm, total width: 1,710 mm, total height: 2,000 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD MINI Screen Drum boosts throughput in recycling, construction, agriculture, and gardening—efficiently screening even moist/sticky materials. Its foldable, semi-mobile build enables fast setup, easy transport, and reliable performance for small to mid-scale jobs. Key features: Iijdpfx Asw R Tkcehyeh • Stepless, reversible drum speed with quick drum change • Three drum variants + custom perforations • Integrated cleaning brush & hopper vibration motor • Adjustable screen angle and variable height • Compact, user-friendly design with single-wheel drive Tech highlights: Ø 800 mm (drum) · L 1.49 m · n 5–20 rpm · P 2.2 kW · 600 kg (Mesh size: Ø 4–100 mm · Voltage 400 V · Filling height 1.5–1.86 m)

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 87A, total width: 2,400 mm, total length: 10,500 mm, total height: 2,300 mm, cutting length (max.): 670 mm, type of input current: three-phase, overall weight: 9,000 kg, Holweg RS2 (42GL) Year 1988 Brand: Holweg Model: RS2 (42GL), modified for standard single-channel RS21 operation Year: 1988 For the production of flat-bottom paper bags, with or without gusset. Machine overhauled: new electrical components, new 3-phase main motor with frequency inverter, unwind station with new Renova Italy electronic brake system and dancer roller. Equipped with inline 4-color flexographic printer model IS 80, maximum print width 800 mm. Printing sleeves included: 4 x 220 mm, 3 x 320 mm, 1 x 370 mm, 1 x 380 mm, 4 x 400 mm, 4 x 430 mm, 4 x 440 mm, 1 x 520 mm, 3 x 520 mm, 3 x 580 mm, 6 x 660 mm, 3 x 680 mm. Gears: - 320 mm: 4 printing gears + 2 machine gears - 340 mm: 4 printing gears + 2 machine gears + 1 printer gear - 380 mm: 4 printing gears + 2 machine gears + 1 printer gear - 440 mm: 4 printing gears + 2 machine gears + 1 printer gear - 520 mm: 4 printing gears + 1 machine gear - 580 mm (290): 4 printing gears + 2 machine gears + 1 printer gear - 680 mm: 4 printing gears + 2 machine gears + 1 printer gear Forming plates: 1 x 90 mm, 1 x 120 mm, 1 x 140 mm, 1 x 150 mm, 1 x 170 mm, 1 x 180 mm, 1 x 200 mm, 1 x 240 mm, 1 x 300 mm. Iiedpfx Ahsy Iclxjyoh Note: Gluing knives for different bag widths are not included. Printer shafts/adapters: 4 printer shafts included, compatible with the printing sleeves listed above. Perforation type. Max unwinder diameter: 1,200 mm Pneumatic shaft: 70 mm Max paper width: 900 mm Min–max bag width: 70–340 mm (current owner produced only one bag size: 140 mm width x 260 mm length) Cut-off length: 190–680 mm Min–max bag length: 180–670 mm Working speed: 400–800 bags/min (depending on bag size) Suitable paper: 30–70 g/m² Machine can be inspected in operation. Immediately available.

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Iodpfjyxp Nxsx Ahyjih Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Condition: excellent (used), Year of construction: 2021, Huber CenterMax band screen for (waste) water inlet Chamber opening: 600mm Screening width: 600mm Discharge height to bottom: 6722mm Machine height above bottom: 8642mm Ijdey Tmbbspfx Ahyjih Perforated plate: 2mm

Condition: used, mileage: 554,359 km, power: 375 kW (509.86 HP), first registration: 06/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,950 mm, loading space length: 6,220 mm, loading space width: 2,510 mm, loading space height: 950 mm, Equipment: ABS, air conditioning, crane, navigation system, parking heater, soot filter, Construction: * Dump body with aluminum side panels, * Cargo area dimensions: approx. 6,200mm x 2,480mm x 1,000mm, * Raised front wall, * Storage compartments, * Perforated rail on the left and right sides, Crane: * Hiab X-Hipro 262 E-8, * Year of manufacture: 2017, * 4-point outrigger system, * Radio remote control, * 5-6 control circuits Reach/Lifting capacity: * Hydraulic reach: 21m * 2.40m = 8,400kg * 4.70m = 4,350kg * 6.30m = 2,960kg Isdpfezlvnrjx Ahyeih * 8.10m = 2,060kg * 10.00m = 1,500kg * 12.00m = 1,120kg * 14.10m = 880kg * 16.30m = 700kg * 18.60m = 580kg * 20.90m = 520kg Equipment: * FH Super Space Cab, * Air conditioning + auxiliary air conditioning, * Parking heater, * Comfort driver's seat with seat heating, * Trailer coupling with continuous braking system + Duo-Matic connection, * 750-liter diesel tank, * Attachments in vehicle color, Technology: * LED headlights, * Additional headlights, * CB radio, * Navigation system, * Reversing camera, * Bluetooth hands-free system, * Cooler box, Safety/Environment: * Retarder, * ABS/VSC, * Adaptive cruise control (ACC), * Differential lock (rear axle), * Fog lights, * Axle load monitoring, * Emission standard Euro 6, Other: * First registration in Germany, * 1 previous owner, 1 driver * Wheelbase 5,050mm, * Payload 8,734 kg according to the vehicle registration document, * Very well-maintained condition, Kinshofer crane attachment with swivel servo available at an extra cost. Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen motorway junction. The NutzfahrzeugZentrum Behnke always has approximately 200 vehicles from the fields of vans, commercial vehicles, and construction machinery in stock! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We would be pleased to accept your commercial vehicle/construction machine in part exchange. If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners at an extra cost. The information provided in advertisements, on the internet, on price tags, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: ready for operation (used), functionality: fully functional, Equipment: compressor, Very nice folding machine with new rubber rollers for sale. Includes perforating, scoring, and slitting wheels. Vacuum and air input, max size 35 x 45 cm. 30,000 sheets per hour, 230 voltage, made in Germany. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please request a price including transport (location within the Netherlands). If you would like to purchase this machine, please send us your company details and VAT number. We will then send you a proforma invoice. Regards, Henk Hoos. Iijdpozlgpaefx Ahysh