Used People Stopper for sale (324)

Condition: new, maximum load weight: 14,160 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,900 mm, loading space width: 2,170 mm, total width: 2,550 mm, total height: 1,100 mm, Year of construction: 2025, Equipment: ABS, Two-axle trailer for the transport of roll-off containers from 5,500 to 7,250 mm in length. Wielton new model, PS-2/P70B Unladen weight approx. 3,840 kg Available immediately! Equipment: SAF disc brake axles 265/70 R19.5 Goodyear Kmax twin tires Incl. spare wheel with winch Air suspension Raise and lower valve EBS 4S/3M WABCO braking system Pneumatic container locking system Djdpfx Aiox Dpxbswsut Mechanical front container stoppers Drawbar L 2,100 mm with 40 mm Ø towing eye Side underrun protection made from aluminum profiles with advertising space Steel rear underrun protection 1x lockable toolbox 1x mesh box Lamp bracket made from lightweight steel sheet Aspöck lighting system Full LED tail lights 2x LED reversing lights 15-pin connector Air connection: ISO coupling heads (conversion to DUOMATIC available at extra cost) Available to order. Further information and an offer available on request Office hours: Mon - Fri 09:00 to 17:00 Subject to prior sale and errors for this offer. Only the agreements in the order confirmation or purchase contract are binding. Exact scope of equipment and pricing will be provided by our sales team. Please contact us.

Condition: used, mileage: 25,600 km, power: 125 kW (169.95 HP), gearing type: mechanical, emission class: euro6, color: white, number of seats: 8, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice from us, we kindly ask you to schedule an appointment. Mr. Kiel will be happy to assist you, Tel: Wheelchair/disabled lift at rear Dusdpfxjyrlzvo Aiwjt A50 front axle with increased payload, AR2 axle ratio i = 3.923, BA3 Active Brake Assist, C6L multifunction steering wheel, CB1 suspension for comfort and load protection, CB7 Stabilization Level I, CL1 steering wheel adjustable in tilt and height, CT1 vibration damper, D03 high roof, E07 hill start assist, E1D digital radio (DAB), E1E navigation, E2I additional battery for retrofit consumers, interior, E36 isolation relay for additional battery, E3J pre-installation switch panel, E3M MBUX multimedia system with 7-inch touchscreen, ED4 AGM battery 12V 92Ah, ED5 parameterizable special module, EK1 terminal strip for electrical connection, ES0 jump-start contact, ES2 12V socket in boot/load compartment, F61 interior rear-view mirror, F64 electrically folding exterior mirrors, F68 heated and electrically adjustable exterior mirrors, FF5 shelf above windscreen, FJ1 folding cover for storage compartment, FJ4 storage compartment under cockpit, FJ5 folding cover for storage compartments left and right, FY7 multi-function remote control, GD8 6-speed ECO Gear 360 manual transmission, H00 warm air duct to passenger compartment, H01 thermal insulation for cargo/passenger compartment, H15 seat heating for passenger, H16 seat heating for driver, H1I long-range air vents in instrument panel, H21 heat-insulating glass with filter strip on windscreen, H22 heated rear window, HH2 electric auxiliary air heater, HH7 basic roof-mounted air conditioning, HH9 SEMI-AUTOMATICALLY CONTROLLED AIR CONDITIONING TEMPMATIC, IL5 left-hand drive, IR4 wheelbase 3665 mm, IT4 3.5-ton, J10 speedometer km/h, J55 seat belt warning device for passenger seat, J58 seat belt warning device for driver's seat, J65 external temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JB7 park package with rear-view camera, JG0 shift point indicator, JH3 communication module (LTE) for digital services, JI7 initial service interval 60,000 km, JW0 reversing warning device, K51 misfuelling prevention, K60 exhaust straight to the rear, KB7 main tank 93 litres, L13 fog lights with cornering light, L21 reverse light bottom, L94 omission of parking light, LA1 high beam assist, LA2 headlight assistant, LB1 side marker lights, LB3 flat indicator lights, additionally at rear on roof, LB5 3rd brake light, LB9 exit lights, LE1 adaptive brake light, MJ8 ECO start/stop function, MP6 engine version Euro VI, MR0 emission stage E (for heavy-duty vehicles), MS1 cruise control, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800 rpm, P48 rear mud flaps, Q11 longitudinal member reinforcement, Q67 rear towing eye, RY2 wireless tyre pressure monitoring VA and HA, S04 adjustable passenger seat, S22 armrest for driver's seat, S25 armrest for passenger's seat, S28 armrest, driver and passenger door, SA5 driver airbag, SA6 passenger airbag, SB1 comfort driver's seat, SE5 lumbar support driver's seat, SK0 comfort headrest driver, SK1 comfort headrest passenger, SK2 seat occupancy detection driver's seat, SZ7 storage net driver's seat backrest, SZ8 storage net passenger seat backrest, T16 sliding door right, T55 electric operation for right sliding door, T74 entry grab handle, U26 pre-installation seat configuration 2/2/3, V35 wheel arch trims, V36 roof lining, V39 plastic floor People Mover, V3L all-weather floor mats, V40 combi floor

Condition: as good as new (ex-display), overall weight: 1,300 kg, empty load weight: 940 kg, maximum load weight: 260 kg, loading space length: 3,130 mm, loading space width: 2,170 mm, loading space height: 2,120 mm, tire size: 165r13c, Car trailer as a construction trailer for 6 people. Duodpfx Aioqwi H Nowet The insulated *stay trailer* is suitable for all seasons. The 50 mm sandwich construction and 60 mm insulated floor keep out the heat and cold. The electric heating provides support in winter. A crew trailer can be used on any construction site. It is even easier to get to the construction site with such a *car trailer* as it can be driven to the construction site behind almost any car. It can also be used as a *burro trailer*. Our construction trailers have as standard an entrance door with personal lock, stairs can be hooked in, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, refrigerator, coffee machine, connection cable, 230V fuse box with FI, sockets, switch and interior light, table and chairs for 6 workers, shelf, window with safety cover, coat hooks, four stable crank supports, 230V power socket, stable frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet room with toilet, storage room, other sizes for up to 16 people, 100 km/h shock absorber and anti-theft device.

Condition: new, Year of construction: 2025, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1000 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 2550 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp Duedpswwt I Njfx Aiwot - Rapid speed on long, and cross slides - CE marking - Manuals

Year of construction: 2026, condition: new, functionality: fully functional, VH 3 Technical Data - Lifting arms with 3 joints, length 2140 mm (optional: 2500 mm). Pneumatic height adjustment, 6 bar compressed air connection. Lifting speed: 2 cm/sec. Max. tool weight, vertical: 50 kg. Max. tool weight, horizontal: 100 kg. WJS Tool Lifter • Improve your working conditions and protect your back. • No more heavy lifting or unnatural working postures during tool changes! • The ergonomic tool lifting device from WJS makes tool changes on planing machines significantly easier. • It doesn't matter if you want to change tools on the horizontal or vertical spindle. • The lifting device protects not only the operator but also the tool and spindle. • Tool changes become faster, saving your company costs and increasing productivity. • Whereas previously two people had to lift heavy loads, now one person can easily move the large tool weight. Ex works price. Delivery time: 10–12 weeks. 1 unit available from stock, subject to prior sale. Djdpfoym Rygox Aiwsut

Condition: used, Belt width: 150 mm Length: 3,500 mm Robust Harbs conveyor belt type TB150/3500 with pneumatic stopper. Dusdpfxewlqx Io Aiwet

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Djdeygndpepfx Aiwout Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: new, Year of construction: 2025, Powder coating system for large parts All dimensions and other changes can be taken into account in the design and planning The offer includes the following components: Cabin for chemical pretreatment (3 zones) with spray ring Walk-in coating cabin Powder gun Powder firing oven Manual conveyor system Electrical control Example: (all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Walk-in cleaning cabin including automatic spray ring 1 Dimensions of the cabin Duedsbhh Awspfx Aiwot Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm height 4,200 mm Walk-in coating booth, manual coating 1 Dimensions of booth length 9,000 mm width 4,500 mm height 3,400 mm 2 Dimensions of booth including extraction length 10,125 mm width 4,500 mm height 3,400 mm powder firing oven 1 Internal dimensions length 6,500 mm 2 Internal dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 External dimensions including thermoblock length 7,600 mm 5 External dimensions including thermoblock width 2,800 mm 6 External dimensions including thermoblock height 3,100 mm Manual conveyor system The conveyor system consists of made of: 1. Support structure, consisting of steel elements, 120x120m/ IPE 160 2. Rollers - No. 9862 GL 4 pieces 3. Pneumatic accessories for locking - unlocking during transfer 4. Rail system - No. 9060 - 234 meters 5. Rollers - No. 9862 GLHT 24 pieces 6. Connecting pieces - No. 9061M 34 pieces 7. Fastening clamps - No. 9067/180 234 pieces 8. Stoppers - No. 9169 21 pieces 9. Movable locking - No. 9601 VM 6 pieces 10. Rigid locking - No. 9601 VF 17 pieces Electrical control The electrical control unit is divided into electrical and automatic control. With it we can control all the units mentioned above and consists of: - PLC - Touch screen 5" color -easy view- - Modem - Thermo-magnetic switch. Fuse (Telemechanique, Siemens, ABB). - Cables, supports, pipes, etc.

Condition: used, Year of construction: 2015, POPP Banding Machine The POPP Banding Machine is a powerful and precise device for bundling and packaging printed materials, paper goods, and other products using paper or film bands. It is ideally suited for use in printing houses, the graphic industry, as well as in logistics and packaging technology. The machine impresses with its robust construction, high flexibility, and easy operation. Special Features - Robust, industrial design for continuous operation - Flexible processing of various product sizes - Stepless speed control directly on the control panel - Product access optionally straight or transverse to the band running direction Dujdpfx Aow Evcrsiwst - Lockable foot stoppers for secure positioning - High performance: up to 600 stacks per hour - Easy integration into existing production lines - Suitable for various banding materials (paper, film) - Compact design for space-saving use Technical Specifications - Working width: 305 mm - Console width: 760 mm - Working height: 740 mm (lockable) - Product format (min.): 150 x 100 x 30 mm (L x W x stack height) - Product format (max.): 400 x 290 x 50 mm (L x W x stack height) - Maximum stacks/hour: 600 - Speed: 10 – 30 m/min - Speed control: 0 – 100% on the control panel - Machine dimensions (net): 1500 x 800 x 1700 mm (L x W x H) - Machine weight: 500 kg - Power supply: 400 V, 16 A, 3 phases, 50 Hz All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2024, lifting height: 2,760 mm, fuel type: diesel, Weights Empty weight: 3.500 kg Functional Lifting capacity: 200 kg Working height: 1.050 cm Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Transport dimensions (LxWxH): 6,16x2,02x2,76 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: France Elévateur Model: Topy 10.2 Year of build: 2024 Condition: Used Data: Gear type: manuell Max. working height: 10,50 m Max. platform height: 8,50 m Max. reach (200 kg): 4,80 m Total dimensions LxWxH: 6,16 x 2,02 x 2,76 m Platform dimensions (outside) LxWxH: 1,00 x 0,75 x 1,11 m Max. basket load: 200 kg Max. Number of people: 2 Swivel range of the upper carriage: 2x 200° Engine: Mercedes Benz Displacement: 1.950 cm³ Dodpfx Aiown Hr Nowout Performance: 110 kw Colour: weiß Driving license class: B / 3 Own weight: 3.500 kg Special features: insulated work basket, socket in the basket, AdBlue.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 0-250-84-4817, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,250 mm, controller manufacturer: HOMATIC, total height: 2,800 mm, table length: 4,300 mm, table width: 2,250 mm, controller model: PC86 PowerControl, spindle motor power: 12,000 W, Equipment: documentation/manual, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machine Year of manufacture: 2019 Maximum workpiece dimensions: • X-axis: 4300 mm • Y-axis: 2250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm EQUIPMENT / SPECIFICATION MATRIX-PRO working table, size 4300 x 2250 mm Dsdpfsx Rcdaex Aiwjut - 4 pneumatically retractable stoppers w. sensor monitoring - 3 vacuum pumps, capacity 290/345 m3/h each at 50/60 Hz, total 870/1035 m3/h - 2 vacuum fields with each 2150 x 2250 mm - Safety mats, safety fences with door - Main spindle motor 11 kW, 24.000 rpm - liquid-cooled - spindle with C-axis - tool clamping system HSK F63 - Tracing system SENSO-FLEX, controllable in z-direction - vertical drilling unit w. 21 spindles, drive motor 2.3 kW - 14-fold tool changer (disk type) 1 CONVEYOR ROLLER TABLE 7080 x 2200 mm Control / software: - PowerControl PC86 power touch - WoodWop Machine dimensions 11,60 x 4,50 x 2,80 m Available from week 28/2026

Condition: used, Continuous Pallet roller conveyor 2690-200-120 RA2444 Pallet roller conveyor segment, split Conveyor length (FL): 2690 mm Frame width (RB): 200/120 mm Roller spacing / pitch 75 mm Frame height: 90 mm Dujdpfxsx Entie Aiwjt Includes 2 brake rollers and two stoppers Stoppers only for cross loading, longitudinal loading requires disassembly Can also be loaded longitudinally with a pallet truck, but without the middle brake rollers Floor mounting possible without middle brake roller Lanes should be installed with a slope of 3-5% Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2016, Overview This compact capping machine was manufactured by the German company ALWID in 2016. Major components are made of stainless steel. It is designed to process t-cork glass bottles as an inline system. The machine is equipped with a capping head for Ø34/19 mm and height 22/13 mm t-corks. Due to our relation to ALWID, we can offer change over parts for different bottles and caps immediately.   Technical data: Mobile stainless steel frame T-cork head for Ø34/19 mm and height 22/13 mm cap-chute for Ø34/19 mm and height 22/13 mm Sorting unit via vibrating feeder bowl with noise insulation hood Conveyor belt Stopper Protective housing with safety switch Electrical control via SIEMENS Logo Dodpexb Uncjfx Aiwsut

Condition: used, Year of construction: 2018, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 0-250-11-2763, Used drilling center Optimat BHX 055 Built-in features: □ Horizontal drilling head with 4 spindles (X axis) □ Horizontal drilling head with 2 spindles (Y axis) □ Drilling head with 13 spindles □ Grooving saw D=100 mm (X direction) □ Pneumatic positioning stopper for workpiece alignment □ Workpiece clamping system Duodpfx Aiox Tz Showot Units / Equipment: □ 10 kW milling motor with frequency inverter (HSK63) □ 4-position tool magazine □ WOODWOP 7 software Workpiece dimensions: □ Maximum: 3050 × 850 mm □ Minimum: 200 × 70 mm □ Material thickness: 12–60 mm General information: Year of manufacture: 2018 □ POWERCONTROL with POWERTOUCH system □ CE marking □ Condition: ready for operation / demonstration possible □ Availability: in stock Documentation: □ Language: Polish □ Documentation: paper + digital media

Condition: new, Year of construction: 2026, The device is designed to cool tubes in CO2 laser plotters thanks to the use of a cooling unit. The CW5200 chiller keeps the water temperature at the right level. Thanks to such cooling, the tube has stable operating parameters. The CO2 chiller ensures optimal working conditions of the tube, effectively protecting it against overheating and damage. The device is intended for people / companies where a laser plotter is an everyday work tool. Technical Specifications: Power supply - 230 [V] Current consumption - 0.25 ~ 3.1 [A] Compressor power - 0.59 [kW] Cooling capacity - 1.7 kW / 5783 Btu / h / 1457Kcal / h Coolant amount - 360 g Tank capacity - 6 [L] Connections (input / output) - 10 [mm] Working height - 12 [m] Flow - 13 [L / min] Duedpog Nkvrjfx Aiwet Weight - 26 [kg] Dimensions (L x W x H) - 58 x 29 x 47 [cm] Security: - Compressor overvoltage protection - Alarm for incorrect water flow in the system - Over temperature alarm The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, The CNC plasma burner with a water table is a device designed for shape cutting of elements from a sheet of metal (in any shape). This machine is characterized by extreme simplicity and ease of use. Our CNC cutter guarantees repeatability and high cutting accuracy (0.1 mm), thanks to which burnt shapes can be transferred directly to the next stage of production. The water table ensures low consumption of consumables, raw materials and low gas emissions. No need to use fume and flue gas extraction. Why is it worth it? water table no need to use smoke and fumes extraction small size of the machine allows it to be placed anywhere THC voltage height adjuster precise setting of the torch a very precise cut requiring no further processing plate detection system convenient control panel intuitive machine operation can cut and gouge steel machine training at the buyer's/seller's premises a library of standard geometric shapes Characteristics and equipment Workspace 1500 x 3000 Y axis range 140 mm (clearance) The use of a rigid and stable structure Water Table Djdsg Nknyjpfx Aiwjut Voltage height regulator Torch height adjustment system Torch height and stabilization sensor FastCAM program - in Polish with a license USB port and internal and external memory Friendly user interface - simple operation even for people who have never worked in programs like FastCAM Import of drawings in *.txt format from any type of program (e.g. AutoCAD, SolidWorks, etc.) MAKRO – a library of standard geometric shapes. This allows you to create figures without having to draw. NESTING – automatic arrangement of elements on the sheet DEMO - Shows the work cycle (path) without turning on the plasma or oxygen source The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, CNC plasma, oxygen-gas burner is a device designed for cutting out shapes from sheets (any shapes). This machine features simplicity and easy handling. Our CNC cutter ensures high accuracy and repeatability of cutting (0.1 mm), allowing for the burned shapes to be transferred directly to the next stage of manufacturing. Why is it profitable? Possibility of burning using plasma or gases 2 in 1 modest dimensions of the machine allow for placing it anywhere THC voltage height controller Duodpoi Apn Uofx Aiwst precise blowtorch setup a very accurate cut, without further additional machining necessary sheet detection system a handy control panel an intuitive machine handling possibility to cut and gouge steel a library of standard geometrical figures Features and equipment 1500×3000 working area Y-axis 140 mm (clearance) range Usage of rigid and stable construction Gases mixer Gas blowtorch Voltage height controller Blowtorch height regulation system Blowtorch height and stabilisation sensor FastCAM software along with a licence in English USB port as well as internal and external memory User–friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them. NESTING – an automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen * Illustrations are preview only, the device is sold without the table. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Product characteristics The plasma burner or oxygen-gas CNC1 burner is a mobile device designed for cutting shapes out of a metal sheet. The machine does not require anchoring, thus reducing the assembly time considerably. Additionally, it enables for placing the machine in any location within the hall without any new expenses. The machine is equipped with an excellent quality wheel system that together with the low weight portal makes the plotter one of the fastest machines available on the market. The machine can be used for manual and automatic cutting. It is equipped with a digital controller that enables cutting out complicated shapes. The machine proves itself very well in the shipbuilding, machine-building and power industry. CNC1 has been equipped with a precise system of X/Y axes guides. The burner is controlled by Sino-USA electronic production system that is characterized by a high precision and elimination of the errors occurring during operation. The machine is very easy to configure. A manual configuration is possible for simple shapes and automatic configuration is possible for more complicated figures. The cutting pattern and the burner motion are shown on a display. An original FastCAM software is attached to the machine for easy configuration. The software is in English which makes the work easier. FastCAM is a technological CAD/CAM program, which is intended for designing and defining cutting paths of the elements cut out by CNC burning machines. The program shall be installed on an office PC or on a portable computer. After defining the way of cutting the operator receives a ready control code, which should be transferred to the control system of the machine. FastCAM program is a standard element of our machines. BASIC INFORMATION User-friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them in CAD system. The program provides 2D figures NESTING – an optimal usage of sheet metal thanks to the automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen Dedpfx Aiovxhwveweut VOLTAGE HEIGHT CONTROLLER The machine is equipped with THC (a voltage control of the plasma burner blowtorch height). A precise control (+/- 0.1 mm) of the plasma blowtorch distance from a sheet metal during cutting. Higher accuracy and absence of defects which capacitive sensors and roller disks have. The parameters of the controller are collected automatically from the Automatic Cutting Parameters Selection table. Technical data Power supply 230 V LCD 7" color Code format G-Code Working dimensions 1500×3000 mm Cutting speed 50–3000 mm/min Illustrations are preview only, the device is sold without the table. Manufacturer: Cormak

Condition: new, Year of construction: 2026, The JMY-870 sharpener is an excellent tool for sharpening circular saw blades. The sharpener is equipped with a durable, diamond grinding disc. This ensures precise and effective sharpening. The solid cast iron construction guarantees stability during work, and the adjustment of the angle of inclination and the angle of the saw provide full control over sharpening. Additionally, rubber pads under the feet minimize noise, ensuring comfort of work. Standardly equipped with a 125 mm diamond grinding wheel, it is suitable for sharpening saws from 80 mm to 700 mm in size. The most important advantages of this circular saw sharpener Duedpfxju Tti Ij Aiwet The sharpener is equipped with a high-quality 125 mm diamond grinding disc, which guarantees extraordinary precision when sharpening carbide saws. The cast iron base ensures stability during work. Thanks to this, the user can be sure that the device will not wobble or vibrate during sharpening. The sharpener is equipped with a tilting blade support, which allows you to adjust the angle of inclination from -35° to +45°. This allows you to precisely adjust the blade setting to the specific needs of the user. An additional function is the ability to set the saw's incisal angle in the range from +85° to -30°, which allows you to adapt the tool to different types of saws. The saw sharpener has been designed with work comfort in mind. Thanks to the rubber pads under the feet, the device works almost silently, which has a positive effect on the comfort of use. Application of the saw sharpener The sharpener is designed for sharpening circular saws. The operation of the device is intuitive and simple, which means that even people who are not familiar with the technique will be able to use this tool. The JMY-870 circular saw sharpener is a professional tool that ensures high quality saw blade processing and work comfort. Thanks to the various adjustment options, it is an excellent choice for people who require a precise and effective tool for sharpening various types of saw blades. THE SET INCLUDES A DIAMOND GRINDING WHEEL! Technical parameters MIN/MAX SAW DIAMETER 80mm - 700mm HORIZONTAL SAW BLADE HOLDER TILTING -35° to +45° GRINDING SET TILTING -20° to +20° GRINDING DISC ROTATIONAL SPEED 2850 rpm DISC DIMENSIONS 125 x 10 x 13 mm MOTOR POWER 0.25 kW SUPPLY VOLTAGE 230 V NET WEIGHT 21 kg DEVICE DIMENSIONS 750 x 750 x 350 mm

Condition: new, Year of construction: 2026, Characteristics of the scissor lift trolley: The TA30 scissor table is a versatile and reliable device that is perfect for a variety of work environments, such as warehouses, construction sites, factories, workshops and many others. Its compact design, excellent quality of welds made by welding robots and reinforced hydraulic system make the scissor table an irreplaceable tool for professionals. Thanks to its functionality and versatile use, the TA30 scissor table is an ideal solution for various tasks. Whether you work in a warehouse, construction site, factory, workshop or other location, this cart allows you to move and manipulate items efficiently. Its impressive load capacity of 300 kg allows you to safely lift heavier objects, and the reinforced hydraulic system makes it easier to use even for people of varying physical strength. The structure of the scissor table has been designed to ensure easier and faster lifting and lowering of goods. Employees can manipulate objects efficiently, which increases the efficiency of logistics operations. Additionally, the anti-overload valve prevents overloading of the trolley, which reduces operating costs, and the tight closure of the pump protects against contamination and oil leaks, which translates into the safety and efficiency of the device. The stroller is also equipped with swivel wheels, which ensures exceptional maneuverability and ease of maneuvering in various conditions. Additionally, easy access to lubrication points facilitates maintenance and keeping the scissor table in perfect condition. It is worth emphasizing that the scissor table offers full availability of spare parts and extensive service throughout Poland. Thanks to this, in the event of any repairs or maintenance, you can quickly obtain the necessary parts or use professional service support, minimizing downtime and ensuring business continuity. Dedpfxeric E Us Aiweut Technical parameters of TA30 CAPACITY 300 kg TABLE DIMENSIONS 500 x 820 mm TABLE LIFTING RANGE 318-910 JUMP 592 DIMENSIONS 1100 x 520 x 1010 mm PEDAL PRESS TO PULL UP (approx.) approx. 25mm DIAMETER OF A CIRCLE 125mm WEIGHT 78 kg

Condition: used, Year of construction: 2026, The device is designed to cool tubes in CO2 laser plotters thanks to the use of a cooling unit. The CW3000 chiller keeps the water temperature at the right level. Thanks to such cooling, the tube has stable operating parameters. The CO2 chiller ensures optimal working conditions of the tube, effectively protecting it against overheating and damage. The device is intended for people / companies where a laser plotter is an everyday work tool. Technical data Voltage 230 V Power consumption 0,45 A Dusdei D D Rvspfx Aiwet Cooling efficiency 50 W Container capacity 9 L Connections (inlet/outlet) 10 mm Maximum working height 10 m Maximum flow 10 L/min Weight 9,5 kg Dimensions 49 x 27 x 38 cm Security: - Compressor overvoltage protection - Alarm for incorrect water flow in the system - Over temperature alarm The price is a net price. Price does not include shipping costs. Please note!!! This product is a return item with visible signs of wear and dents. No warranty included.

Condition: new, Year of construction: 2026, Characteristics of the TA50 scissor trolley: The mobile scissor table allows you to work in many places, transporting workpieces weighing up to 500 kg. Standardly equipped with brakes on both wheels and smooth regulation of lowering the table top, the scissor table ensures safe and comfortable use. Exceptional maneuverability, thanks to the use of swivel wheels, allows you to easily maneuver in tight spaces and move around obstacles. Thanks to this, the user can effectively use the scissor table in various workplaces. Excellent quality welds made by welding robots are another advantage of the mobile scissor table. This is a guarantee of precise and durable welded joints, which translate into high quality of workmanship. The reinforced hydraulic system makes it easier to lift heavy pallets with goods, enabling even people with less physical strength to operate the trolley without difficulty. The design of the scissor table ensures easier and faster lifting and lowering of goods, which translates into work efficiency. Additionally, the mobile scissor table is characterized by a tight pump closure, which protects against contamination and oil leaks. This not only ensures long-term and reliable operation, but also minimizes the need for repairs and maintenance. Full availability of spare parts and service throughout Poland is an additional advantage of the mobile scissor table. In case of any repairs or maintenance, the user can count on quick and reliable assistance. Djdpfsric Hnsx Aiwout Technical parameters MAXIMUM LOAD 500 kg LIFTING HEIGHTS 340-855 mm PLATFORM DIMENSION 910 x 515 x 50 mm PLATFORM HANDLE HEIGHT 950 mm WEIGHT 75 kg Standard equipment: Reinforced polyurethane wheels Ergonomic handle Sealed hydraulic foot pump Adjusting the descent speed of the platform Lock on the road wheels

Year of construction: 2015, condition: good (used), Alimak TPL 2000D Transport Platform Brand: ALIMAK HEK Type: TPL 2000D Year of Manufacture: 2015 Serial Number: 50386 Weight: 1850 kg Overall Dimensions (L): 1500 mm Overall Dimensions (W): 3200 mm Power Specifications: 400 V, 50 Hz, 3-phase; Rated Power: TP 2 x 3.8 kW, MH 2 x 7.6 kW; Rated Current: TP 15.4 A, MH 30.4 A; Connected Load: TP 10.8 kVA, MH 21 kVA Fuse: 32 A Payload (kg) 2000 Maximum number of people (including payload) TP mode: 7 Number of people - MH mode: 0 Lifting speed (m/min) TP mode: 12 Lifting speed (m/min) MH mode: 24 Maximum lifting height (bound): 100 m Maximum distance (m): 7.5 Maximum overhang (m): 4.5 Maximum height of first guy wire (m): 6 Mast type: Triangular 350, steel tube Financing through our bank is also available. Dedpfx Aetndd Tjiwout komplett-konzept.leasingo.de Find more transport platforms – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2013, Alimak TPL 2000D Transport Platform Brand: ALIMAK HEK Type: TPL 2000D Year of Manufacture: 2013 Serial Number: 50138 Weight: 1900 kg Overall Dimensions (L): 1500 mm Overall Dimensions (W): 3200 mm Power Specifications: 400 V, 50 Hz, 3-phase; Rated Power: TP 2 x 3.8 kW, MH 2 x 7.6 kW; Rated Current: TP 15.4 A, MH 30.4 A; Connected Load: TP 10.8 kVA, MH 21 kVA Fuse: 32 A Payload (kg) 2000 Maximum number of people (including payload) TP mode: 7 Number of people - MH mode: 0 Lifting speed (m/min) TP mode: 12 Lifting speed (m/min) MH mode: 24 Maximum lifting height (bound): 100 m Dsdpfx Aijtnda Eowsut Maximum distance (m): 7.5 Maximum overhang (m): 4.5 Maximum height of first guy wire (m): 6 Mast type: Triangular 350, steel tube Financing through our bank is also available. komplett-konzept.leasingo.de Find more transport platforms – new and used – in our shop! International shipping costs on request!

Year of construction: 2014, condition: good (used), Alimak TPL 2000D Transport Platform Brand: ALIMAK HEK Type: TPL 2000D Year of Manufacture: 2014 Serial Number: 50229 Weight: 1850 kg Overall Dimensions (L): 1500 mm Overall Dimensions (W): 3200 mm Power Specifications: 400 V, 50 Hz, 3-phase; Rated Power: TP 2 x 3.8 kW, MH 2 x 7.6 kW; Rated Current: TP 15.4 A, MH 30.4 A; Connected Load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Maximum number of people (including payload) TP mode: 7 Number of people - MH mode: 0 Lifting speed (m/min) TP mode: 12 Lifting speed (m/min) MH mode: 24 Djdpfx Astnczcjiweut Maximum lifting height (bound): 100 m Maximum distance (m): 7.5 Maximum overhang (m): 4.5 Maximum height of first guy wire (m): 6 Mast type: Triangular 350, steel tube Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!